https://talonairgunforum.com/members/gearhead/activity/ Activity feed for gearhead. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 a20d44a855a9174b9183f5be2f0a14b4 https://talonairgun.com/forums/topic/357-vs-45-for-deer/#post-265485 Sun, 29 Jan 2017 16:11:24 -0400 I’m sure the 357 would do fine with my. 308 171grain at 950fps has some thump at 300yards . A buddy on here was building a
457 thing was going to be nuts lmao

]]> 51a018b7aa283a2b18fdfb34fd1ba3da https://talonairgun.com/forums/topic/complete-valve/page/2/#post-159050 Fri, 17 Aug 2012 19:48:37 -0400 dam finally going to sell them LO.L ill tell all right now u want power this it the valve. the fact he’s finally decided to sell them shocked the hell out of me. and he’s not joking when he said he’s put 2000 shots threw it. I’d say more then that. and i love my 308 valve I think its the same specs or dam close. but the body on mine is longer .…Read more

]]> 89c35c3d264a154937fe2c0cb759b518 https://talonairgun.com/forums/topic/to-all-that-shoot-long-range-100-yards-with-a-af-rifle/#post-159048 Fri, 17 Aug 2012 19:26:13 -0400 haven’t been on in a wile but look like a spacer. might be wrong but when making power the wheel is useless once u find the setting. like my af 308 shots heavey shit and I never change the pre load so a perfect bushing stops UN wanted change. thats my though.

]]> 259dd07c924ec8ef042771c69fa017e7 https://talonairgun.com/forums/topic/scope-rings-2-piece-or-1-piece-branded/#post-156696 Thu, 31 May 2012 20:36:50 -0400 go one piece utg is the brand I have works great. and I say one piece because it wont twist when hit from the side. to to mention that I ha e one that got ran over by my grandpa’s car and it as straight as an arrow still

]]> 87b8bbd3cc9f69b803392caf16815132 https://talonairgun.com/forums/topic/valve-d0/#post-155646 Wed, 16 May 2012 02:12:42 -0400 The smooth bore fx barrel fit the .251 6 rings great no need to cut a lead there pritty accurate to at 66 feet they will clover leaf could do better if I practiced more with it

]]> f03b621019db98afdc138645ab8fc677 https://talonairgun.com/forums/topic/airsoft/#post-155471 Mon, 14 May 2012 15:56:46 -0400 LOL

]]> 5f682260978836f2ba3e5177725c8c06 https://talonairgun.com/forums/topic/moneyshots-new-valve/#post-155434 Mon, 14 May 2012 00:52:11 -0400 Yeah Doug’s a cool Guy I hang out at his house every now and then and he helps me out. U will be happy with his work. Ans good luck to u

]]> b0c912cd262b3957dcd47738c5707d94 https://talonairgun.com/forums/topic/airsoft/#post-155432 Mon, 14 May 2012 00:47:53 -0400 Lmao find out a weight and see what the foot pounds are just for shits and giggles

]]> 0374f78fed5ecaed6da5a7ecbcfb81be https://talonairgun.com/forums/topic/forum-vote-off-going-back-to-pcp/#post-154811 Fri, 04 May 2012 20:02:30 -0400 Get a .25.compleat whit shroud from Tony he has sweet setup. As for scope I have an 8×32 56mm accueshot scope and love it nfs. What do u wana shot give some ideas so we all can help u better

]]> ebb0aec564de277605e3e46e8cde6e90 https://talonairgun.com/forums/topic/condor-177-valve/#post-154662 Wed, 02 May 2012 16:56:49 -0400 I think u will get tank dump if u use a softer spring with the .177. It can be used but u wont get passed like 500fps or.so

]]> c82e9e2e1466bcbd78d74715708e2bc4 https://talonairgun.com/forums/topic/regulator-recommendations/#post-154614 Wed, 02 May 2012 02:35:02 -0400 If u don’t want a powered house regs work great don’t know about those ones. But if u want power then u dont want a reg . But there are regs out there that are custom that will do both but I don’t think the Guy will sell them. Maybe he will chime in. What do u wana do explain. That will help people help u

]]> 4dff9872caed9960354257fa86a4ff65 https://talonairgun.com/forums/topic/spool-valve/page/2/#post-154494 Mon, 30 Apr 2012 14:41:36 -0400 Everybody know I’m not stealing shit. I make my own stuff. I just wonders how they look. IV already built my own 308 I make my own valves. So I don’t think any one is going to point me as a Stealer. But thank for the explaintion Harryparatestis I kinda think I know what your talking about

]]> 8e0ca7a35987bcbe3297dbb6363e8245 https://talonairgun.com/forums/topic/shift-poi/#post-154407 Sun, 29 Apr 2012 16:02:59 -0400 Try a different scope seams Like that’s the problem. I would almost bet the farm. Try smacking it and see if poi changes

]]> e06f32d4225ede9a8fe93ed1d55a9c5f https://talonairgun.com/forums/topic/spool-valve/page/2/#post-154393 Sun, 29 Apr 2012 04:56:25 -0400 What dose a spool valve even look like u say there on paint guns could some one show me a quick drawing? I just courious. And sand for someone so new your kinda mean
Hay I’d expect the same if I just joined and started askimg people to send plans. Dose seam fishey but who know maybe u should have waited longer to so that u have like 20 post and…Read more

]]> 1177a45cdf0ed33c2b90815b1cb919e0 https://talonairgun.com/forums/topic/af-loss-of-velocity-help/#post-154288 Sat, 28 Apr 2012 04:55:06 -0400 I use grease lithium and polymers suff. Works great. But I don’t car if it mess up orings there cheap.

]]> c26dca646b76349e28b375c51c3dc632 https://talonairgun.com/forums/topic/condor-on-c02/#post-154207 Fri, 27 Apr 2012 16:37:52 -0400 Wow so slow. LOL but not bad for co2 didn’t think co2 had it in it. How man’s shots do u get?

]]> 9c546ba98a615ea278e7f4f68d709036 https://talonairgun.com/forums/topic/talon-tank/#post-154198 Fri, 27 Apr 2012 05:32:17 -0400 We needs a little more details. Like pellet. Size and kind barrel length.

]]> 2c89487943e71eb5ad3ed5d20cfb6288 https://talonairgun.com/forums/topic/valve-stems-and-tanks/#post-154177 Thu, 26 Apr 2012 05:59:02 -0400 Yeah making valves is tiff ithink I finally figured out my. Custom 308 valve I think I can finally break 950 with a 118 grain bullet took a lot of messing and tweeking the ports to get it to 900

]]> 03d5e53bfb26646717fc4def28100832 https://talonairgun.com/forums/topic/a-day-for-the-memory-bank-thank-s-tim/#post-154136 Wed, 25 Apr 2012 07:35:23 -0400 Yeah tim is a cool guy I was there yesterday and filled my scuba tanks. He only yells at dumb people . He never yelled at me. And boy is he smart. And his dog loves catching a frzzbe. If u can throw it good.

]]> c613c32e8f914e0c3a043020ae185b37 https://talonairgun.com/forums/topic/sabots-for-a-308/#post-154093 Tue, 24 Apr 2012 19:44:42 -0400 Well they came if I have time to get a tank or two filled ill see what’s up with these things

]]> 6410481b548ffd69896e30bda70f595d https://talonairgun.com/forums/topic/calling-all-west-coast-tag-men/page/2/#post-154068 Tue, 24 Apr 2012 02:59:09 -0400 I’m down for a range mission. But if its soon Doug could u pick me up if the one inch crack in my radiator isn’t fixed. It just happened and its aluminum . Wait can I use your tig..

]]> a532c0879c2acbeebad6621b6f9a8017 https://talonairgun.com/forums/topic/help-in-626-socal/#post-154067 Tue, 24 Apr 2012 02:53:46 -0400 Oh just bring air and pellets and we will tune it up some. IV got a chrony and lathe and mill ect

]]> 44f56abfa8ad7bcf5fbef1d14721388d https://talonairgun.com/forums/topic/help-in-626-socal/#post-154066 Tue, 24 Apr 2012 02:44:05 -0400 I’m in Carson CA 90745 I will help just come on over . Its easy

]]> 121347b2c6a0a6bed524147feb6c15b3 https://talonairgun.com/forums/topic/sabots-for-a-308/#post-154037 Mon, 23 Apr 2012 18:02:27 -0400 I so understand good explantion and yeah I wana go bigger. My 308 shoots 118 pritty good just thought I’d try it with these sabot things and fire like 45 grain 223 varmint rounds. Just thought it would fun to try . Like I said its only 10 bucks I lose..

]]> e61f4b82707631abafaae9c975fd4a6d https://talonairgun.com/forums/topic/calling-all-west-coast-tag-men/page/2/#post-154035 Mon, 23 Apr 2012 17:58:09 -0400 Where would be a good place any ideas? We should find a place that’s in the middle of us all west costers

]]> 279760202b58bd4bf9521502fa92178f https://talonairgun.com/forums/topic/calling-all-west-coast-tag-men/#post-154023 Mon, 23 Apr 2012 16:29:14 -0400 Let find a place out away from people so we can do some long rang shoting it even a place where there are tons of critters to shot at and to make it fun they must be 100 yards out. Just a thought. And I’d love to see what other rigs people have. And I’d be more then. Willing to let people shot my guns. I mean who dosnt want o shot a308 air gun

]]> b7096571f137e22f7ecddef78f26fba2 https://talonairgun.com/forums/topic/calling-all-west-coast-tag-men/#post-153999 Mon, 23 Apr 2012 04:00:50 -0400 I’m down for it It would be chill shoting ,looking at other people’s guns. I bet Daytona would be in.

]]> 1e6522b38b4843d2cadaa87d0c438c8b https://talonairgun.com/forums/topic/new-308-valve/page/2/#post-153984 Sun, 22 Apr 2012 20:47:53 -0400 Oh 118 my bad

]]> ef555e7a08c2f71bdc34795eaea03d78 https://talonairgun.com/forums/topic/new-308-valve/page/2/#post-153962 Sat, 21 Apr 2012 23:44:52 -0400 Well got my 308 to shoot 800fps with a 2800 fill and an .080 tophat gap power wheel on 5

]]> 99443cc724fc98579a776a0e253e8ece https://talonairgun.com/forums/topic/who-wants-to-order-me-a-marauder-mag-and-ship-to-the-uk/#post-153823 Tue, 17 Apr 2012 16:40:20 -0400 Just courious how much tax is it that u need some one to send it to u? And can we get introuble.

]]> c063fc0663f68487385ae9136b6615b3 https://talonairgun.com/forums/topic/my-highest-25-lbt-fpe-so-far-or-so-i-thought/#post-153772 Mon, 16 Apr 2012 16:18:58 -0400 K now what’s the best way to slug the barrel

]]> 519ddf1cf1c15eec618a2475e606f6c5 https://talonairgun.com/forums/topic/helium-d86/#post-153748 Mon, 16 Apr 2012 01:57:40 -0400 God was that loud. I rember that

]]> 05c62c54203080459e7500a0a4ba8998 https://talonairgun.com/forums/topic/my-highest-25-lbt-fpe-so-far-or-so-i-thought/#post-153742 Mon, 16 Apr 2012 00:43:46 -0400 I’m just wondering what are the LBTs sized at?

]]> c8048007d7bb2ec0b24c7293f37d8729 https://talonairgun.com/forums/topic/i-finally-got-around-to-building-a-coffin-for-the-lathe/page/2/#post-153664 Sat, 14 Apr 2012 00:31:04 -0400 Beer!!!! where ?

]]> f1248497922b75d368d69c78e4bfa6b6 https://talonairgun.com/forums/topic/i-finally-got-around-to-building-a-coffin-for-the-lathe/#post-153658 Sat, 14 Apr 2012 00:04:15 -0400 LOL oops. I use my phone I don’t have a computer. and it corrects for me even if I don’t want it to. Drinking and posting LOL it happens drinking and machineing no way a beer yes. After 3 I stop on the lathe. I like my fingers

]]> cca6695074b7a4cc1b1142bdcebfa0d8 https://talonairgun.com/forums/topic/i-finally-got-around-to-building-a-coffin-for-the-lathe/#post-153650 Fri, 13 Apr 2012 22:28:10 -0400 LOL hay I leave my key in the chuck to. And no worrys i leave the key in the chuck to( bad habbit) and once there catch it with there chest they will all way check. Been there done that. did I lean nope. LOL. Its hallway in my chuck I don’t loose it that way

]]> 01d4b3237371f42618058cfb4ff8aeb1 https://talonairgun.com/forums/topic/i-finally-got-around-to-building-a-coffin-for-the-lathe/#post-153638 Fri, 13 Apr 2012 18:23:20 -0400 Very nice I Tryed something like that for my lathe and ill be dam chips still went every ware. Have fun and turn away. Also if u don’t mind me asking I wanted a little lathe like that. How much was it? And will it do threads? Where can I look for one?

]]> 671a08b541e88f199d4fe91ef33cc035 https://talonairgun.com/forums/topic/anyone-use-a-metal-breech-for-ther-af-rifle/#post-153568 Thu, 12 Apr 2012 09:58:05 -0400 I have an aluminum one on my .308 and it dose not touch the frame and is a side cocker and it has no problems sliding. I use black grease on it and I dont care if I mess up orings. There cheap as dirt and there easy to changes. If u go brass or stainless or any heavey metal u need to cut it down and lighten it if there to heavey u will tank dump.

]]> fbef7b997e878405bd640e9c699982d4 https://talonairgun.com/forums/topic/my-3-condors/#post-153471 Wed, 11 Apr 2012 05:15:57 -0400 Your right it is close to the length of the .25 what od tubing did u use for your 308 I used 1.725.

]]> 6b6719453de1c0d814b962f77cf41b2e https://talonairgun.com/forums/topic/new-spin-loc-system/#post-153421 Tue, 10 Apr 2012 16:34:41 -0400 Yeah u just have to ask I was able to order eather one about 3 weeks ago they said they still have a lot of old ones.

]]> bb05cbf23851e9df7b33aacd2cba14f7 https://talonairgun.com/forums/topic/how-to-tap-a-shallow-hole/#post-153387 Mon, 09 Apr 2012 23:20:43 -0400 That’s what it was called a bottom tap. But I just grind off the tapered part works the same and u save a bit of money.

]]> 22e18819d2c12bad02dce03e5ee27cff https://talonairgun.com/forums/topic/how-to-tap-a-shallow-hole/#post-153377 Mon, 09 Apr 2012 19:56:36 -0400 Well u can buy a tap that dosnt have the taper. But what I do is I grind off most of the taper and I get it to were it just starts then I grind off the rest untill its flat and then finish tapping like normally.

]]> 3c4712cace8fbe05896b1008ebe32614 https://talonairgun.com/forums/topic/eunjin-25-accuracy/page/2/#post-153362 Mon, 09 Apr 2012 15:12:30 -0400 Never had a problem with it been using it for years. And IV never had any funny smell . I thought it was Springers u shouldn’t use oils on.

]]> ba0849d090eea96e6241a816ef976a2b https://talonairgun.com/forums/topic/eunjin-25-accuracy/#post-153304 Sun, 08 Apr 2012 04:54:10 -0400 Well witch oil shouldn’t I use? And y shouldn’t I use it?

]]> f4bbd8bb6f1030a2c5fd9cef76dfd250 https://talonairgun.com/forums/topic/eunjin-25-accuracy/#post-153176 Thu, 05 Apr 2012 19:10:06 -0400 Yeah its hard or just luckey .but my .25 loves them. I can shot really good groups IV taken many little Critters any ware from 40 yards to about 120 with the 43 grain. But I guess I’m a luckey one. Oh I have mine covered in penatration oil.

]]> 4bb24526eb3b8ab96d9bb2f500fc10bd https://talonairgun.com/forums/topic/eun-jin-does-not-fit/#post-153002 Mon, 02 Apr 2012 02:52:35 -0400 Just push really hard there tuff to put in but can be done. If it hurts your finger use a penny.

]]> a8fdc9f923b6fd984acd50e7bd518dc4 https://talonairgun.com/forums/topic/barrel-od-d40/#post-152989 Sun, 01 Apr 2012 17:11:56 -0400 The 24″ in 22 and 25 are thicker then the 12″22 don’t own any 18″ so can’t say for those

]]> 1a84d1a6bdf686ab9195306802277d58 https://talonairgun.com/forums/topic/new-308-valve/page/2/#post-152642 Mon, 26 Mar 2012 20:03:17 -0400 Got it to fire filled to 2800 and boooom forgot. to top off when I left. But fired one more ran to my car drove to the closes crony witch was at mac1. Fired it again and oops forgot to tunn on the crony that was shot 3 shot 4 threw. It 741fps witch I feel is ok for the 4th shot pluses a few dry fires.

]]> d61ca21b54dfece8e7346e48bcf10dc6 https://talonairgun.com/forums/topic/new-308-valve/page/2/#post-152462 Fri, 23 Mar 2012 15:49:14 -0400 Got the 308 going but I keep getting valve lock I think going to drain down to 2800 then see if it open. And I ha. 12 lb spring might need to up it to14

]]> 9fa304245e998a80ec6e833a8049eec1 https://talonairgun.com/forums/topic/controlling-fill-pressure-for-less-than-5-00/#post-151920 Mon, 12 Mar 2012 21:23:41 -0400 I really don’t think thats rated to more then 300psi I Sean this ant the home deposit wanting to do the same thing. Go spend 20 bucks and save some fingers. I might be wrong

]]>