Talonairgun | gert | Activity https://talonairgunforum.com/members/gert/activity/ Activity feed for gert. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 ee43a1929a7d0abd75949af3a876ce56 gert replied to the topic reg/tophat setting in the forum Mods/Machinists https://talonairgun.com/forums/topic/reg-tophat-setting/#post-167087 Thu, 14 Feb 2013 19:38:58 -0400 I installed one of these: http://www.altaros.cz/en/
I use the bottle now in both my guns. The reg is set at 2000psi and I fill the bottle to 3000psi. The valve is TT
1st set-up is a 19 inch .25 barrel and it gives me 867 ft/s(kings) with a max deviation of 3ft/s for 24 shots before the pressure drops below 2000psi.
2nd set-up is an 8 inch .22…Read more

]]> 5ec8530c92547b28314934355b85cc28 gert replied to the topic cocking problem in the forum Mods/Machinists https://talonairgun.com/forums/topic/cocking-problem/page/2/#post-155951 Mon, 21 May 2012 18:04:16 -0400 quote LURKER #1:Sorry I can’t find the brilliant person that helped cure my hammer latch problem BUT…..
Here is my attempt to describe the issue and solution:
My problem began after removing the not so dependable safety. So here is what I remember.
My hammer sear nolonger had the safety block spring to assist holding the sear to the rear, where…Read more

]]> 434a1faa2ea883738c44702c6e699c8a gert replied to the topic cocking problem in the forum Mods/Machinists https://talonairgun.com/forums/topic/cocking-problem/page/2/#post-155943 Mon, 21 May 2012 16:30:21 -0400 So putting in the safety should solve my problem also, I’ll try that.

]]> e7759e1826a58f7dcb792e41115d2f73 gert replied to the topic cocking problem in the forum Mods/Machinists https://talonairgun.com/forums/topic/cocking-problem/page/2/#post-155887 Sun, 20 May 2012 17:39:46 -0400 Pics mailed, didn’t manage to post them here.

]]> 65436f6627e455b09c05b3ce55318e23 gert replied to the topic cocking problem in the forum Mods/Machinists https://talonairgun.com/forums/topic/cocking-problem/page/2/#post-155850 Sat, 19 May 2012 18:15:57 -0400 I’m getting desperate about this, tried all the above, none works. Anymore ideas?
It is really a strange thing, I can push the sears down with just a little amount of pressure with an allen wrench and it is cocked, but when I place the spring in and assamble everything it doesn’t work unless I play with the trigger while cocking…

Gert

]]> a5ed77eb287408d38951adfb92e3ba58 gert replied to the topic cocking problem in the forum Mods/Machinists https://talonairgun.com/forums/topic/cocking-problem/#post-154990 Mon, 07 May 2012 18:44:07 -0400 Thanx for the tips, I’ll try to put more upward spring tension on the sear. It has nothing to do with the safety as I removed it.
You’ll hear how it works out.

Gert

]]> e7769899c9827e4cc1646934465d1c98 gert replied to the topic eunjin .25 accuracy in the forum General Chat https://talonairgun.com/forums/topic/eunjin-25-accuracy/#post-153269 Sat, 07 Apr 2012 06:55:32 -0400 Thanx guys for all the info.

Gert

]]> 2db772ea695221ba2d001d49d77bff15 gert replied to the topic eunjin .25 accuracy in the forum General Chat https://talonairgun.com/forums/topic/eunjin-25-accuracy/#post-153244 Fri, 06 Apr 2012 17:59:18 -0400 I could live with 1 inch group at 50yards. So I probably don’t have the right barrel for the eunjins.
Are the surefire slugs less barrel picky? What can I expect at 50 yards?

]]> f17615d842adfe44204d842bfbe41ae7 gert replied to the topic leaking high flow valve in the forum Mods/Machinists https://talonairgun.com/forums/topic/leaking-high-flow-valve/#post-120695 Sun, 17 Oct 2010 18:16:44 -0400 quote Subssonic:is their “slop” in the valve stem??….ie you can wiggle the valve stem in the guide..

I just cheched it and probably you’ve got the right answer to the problem. I can wiggle the stem a little bit. So does that mean that the stem is of no use in my valve? 😯

]]> bdf9b3798f5949ac952347bbf101abf5 gert replied to the topic leaking high flow valve in the forum Mods/Machinists https://talonairgun.com/forums/topic/leaking-high-flow-valve/#post-120683 Sun, 17 Oct 2010 06:59:15 -0400 Thanx guys, but I tried that already and it doesn’t work. The strange thing is, sometimes it stops leaking for a few shots and then it start to leak again and doesn’t stop anymore. Can’t think what it is or how to solve it. And that’s a shame cause I realy like to shoot that valve, more consistent then anything else.

Gert

]]> 744c059de5dfd63f35fe7cadb2fe9279 gert replied to the topic NOT HAPPY WITH SELPHB VALVE!!!!! in the forum General Chat https://talonairgun.com/forums/topic/not-happy-with-selphb-valve/page/6/#post-106804 Sun, 02 May 2010 11:52:14 -0400 Is there somebody who can provide me a replacement stem that’s made how it should be?

Gert

]]> 62a78fa38b42a91ed0a2455bc67d1e10 gert replied to the topic NOT HAPPY WITH SELPHB VALVE!!!!! in the forum General Chat https://talonairgun.com/forums/topic/not-happy-with-selphb-valve/page/6/#post-106708 Fri, 30 Apr 2010 19:12:23 -0400 Was very happy with my valve (980fps with .22 predators and 12 inch barrel) untill last night. The thing broke down, as happend with others. This is approx. after 1000 shots. Thought it wouldn’t happen to me 😥 .
What now?! Will a condor valve give me the same numbers?

Gert

]]> c7e99fcba67a2270d80239a3ef633b11 gert replied to the topic .25 Cal. barrel in 18" or 24" in the forum Talon/Talon SS https://talonairgun.com/forums/topic/25-cal-barrel-in-18-quot-or-24-quot/#post-68906 Fri, 10 Apr 2009 19:03:14 -0400 I have a 19 inch barrel in my stock SS and it does 41fpe(240m/s) with barracudas and 32 fpe(260m/s) with FTT.

Gert

]]> 2555de192f56dfefcef2600e5871cabc gert replied to the topic 30-35fpe in the forum Talon/Talon SS https://talonairgun.com/forums/topic/30-35fpe/#post-63542 Fri, 20 Feb 2009 05:38:03 -0400 Thanx for the info 271867. I think I’ll go for that set up.

]]> a722f7e86d4f4d631e60a941b57209ad gert replied to the topic 30-35fpe in the forum Talon/Talon SS https://talonairgun.com/forums/topic/30-35fpe/#post-63405 Thu, 19 Feb 2009 16:06:58 -0400 quote 271867:easiest way would be to get a high flow tank and a heavier hammer. i have a condor with a 12inch barrel i get 30 ft lbs with jsb exacts shooting at 950 fps, 35 ft lbs shooting kodiaks at 870 fps, and i get 40 ft lbs shooting 28gr eugins at 800fps

So a condor bottle and hamer will do the trick. And how much usable shots do you get?…Read more

]]> 80c676ca9d6b120edf35ba16fa14e142 gert replied to the topic 30-35fpe in the forum Talon/Talon SS https://talonairgun.com/forums/topic/30-35fpe/#post-63211 Tue, 17 Feb 2009 20:36:06 -0400 So 30fpe in .22 and 12inch isn’t an option?

]]> a45ffb2f20410472e8917788f8d0da1f gert replied to the topic powerwheel question in the forum Talon/Talon SS https://talonairgun.com/forums/topic/powerwheel-question/#post-43639 Tue, 22 Jul 2008 19:49:36 -0400 Thanx I enjoyed the forum already even before I had my SS. So in my case I should put it on 2. It’s just that they say on the instruction video PW low for indoorshooting and that’s now one of the reasons I chose an AF rifle, being able to change the power.

]]>