However, because of that I will likely buy one. I just obtained a vintage Crosman 118 which, at $37.50, did not sell well 55 years ago and has become a nice, valuable collector’s item.

When you shoot it and the silent gun blows the crap out of a can full of water people just start laughing at something so unexpected. 😆

You might consider one of those “Gun Kote” bake-on paint finishes sold by Brownells.

http://www.brownells.com/.aspx/pid=1150/Product/GUN_KOTE_trade__OVEN_CURE__GUN_FINISH

I hear it is very hard, durable and thin.

I’m going to give AB Airguns a try for resealing my 101. Thanks for the tip.

Or… get an old (made 1958 to 1971) Crosman Hahn 166. Again, the cocking only loads another projectile (this time a BB) and cocks the hammer.

I bought this like-new-in-box on Gunbroker.com for $100. It needs a little work on the hammer spring but I’ll get to it some time.

This is a little gun made for youngsters. However, steel BB bounce and…Read more

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=174432619

Get an old(made 1965 to 1970) Crosman 99. Great gun and very, very easy to cock. The cocking only serves to load another .22 pellet from the “tubular” magazine into the chamber and cock the hammer to low power. For high power, the little guy just has to thumb the hammer back one more…Read more

I may also try Mac I. I’ve been over to his shop a couple times and he helped reseal a Crosman 130 one afternoon. Really nice guy.

Also, he has this cool old dog at the shop that really knows how to bounce a ball. The dog brings it out of the back in his mouth, then whips his head down…Read more

I have a Pact MKIV chrono but haven’t ran the Crosman 150 over it. Maybe I can get to that this weekend and…Read more

Here’s a 150 I got months ago. Like brand new and shoots great.

Benn buying up old Crosmans and Daisys. Must have close to 30 now including 3 Crosman 600s, 2 Crosman 400s, V300, Trapmaster 1100, 147BP, Daisy model 25s, Mark II…

This is on the way right now.

I know because I too had one as a youth. I’m thinking of buying the $60 like new one on the web just to relive the memories lost from my old one. You know, shooting your brother in the ass,…Read more

So what is the difference SAVAGESAM? Looking inside my TT shroud it looks like a bunch of chambers…Read more

It makes the gun so quiet my son started laughing. After shooting it without the shroud, I put it on and fired a second shot. My son just started laughing as he couldn’t imagine such a reduction in noise.

Hey Wok. Is that a Beeman adjustable mount on top of the tri-rail?

Gunby

Some stain and tung oil (I like satin) and you could sell those things. Nice design.

Without hot powder gases to melt the metal, small amounts of vaporized lead would only be in your basement air through one means. That would be if you’re shooting the pellets against a steel plate or other hard surface, which would send fragments and lead dust flying.

http://www.pyramydair.com/s/a/Beeman_1_Rings_High_Extended_Mount_9_5-11_5mm_Dovetail/1935

What should they change about our AG?

1) pressure gauge on tank
2) angled tank adapter for better shouldering

In firearms the hardened lead helps prevent small amounts of melted/ vaporized lead being deposited in barrel when the hot powder gases burn. Also, firearm barrels have a faster twist rate to the rifling than airguns…Read more

In firearms, the copper wash does help reduce leading, somewhat, by preventing some of the bullet lead from being vaporized by hot powder gases. It makes…Read more

Ahhh… duhhh… slober slober… I forgot.

What was the question?

Maw, good choice on the Muzzle Mac wire stock. Excellent quality and a great guy to deal with.
http://muzzlemack.com/CurrentProducts.aspx
Mine has one but without a power adjuster. I didn’t know they came that way. I’ll have to check it out.

I’m changing the Crooked Barn breach out for an RJ and have…Read more

I just ordered one of these last week from Pyramyd. They were on back order with an “in stock” date of 5/4/09. With just the tri-rail, almost all my vertical scope adjustment was used…Read more

Now that picture is funnier than sh*t. LMAO ➡ ➡

Gunby

You want to keep your scope as close to the barrel axis as practical. The higher the scope above the bore axis, the more difficult it is to sight-in and makes holdover more complex.

I think a custom butt like the Wok butt would help alot…Read more

Hey saw, how about the pellet hitting the CROW rather than the other stuff hitting the fan!!!

Please take another movie. I want to see what your modded .25 does on a crow.

Last week, for Earth Day, I tried to nail one and make the world a little better. I came up dry.

I remember the first time I took my son shooting. I had purchased a single-shot .22 specifically for that purpose.

When we arrived at the range, my friend pulled out an Carbon AR15 assault rifle built on a pistol frame with a 10″ barrel, muzzle brake and fully…Read more

The adjustments are really a spring tension on the hammer and provides a rough start to modifying velocity. Other parameters have to be considered when adjusting the power wheel. It is not simply crank up the wheel and the power…Read more

LMAO also!!!!!!!!!!!!!!
:7

– 740 fps with 20.7 grain Beeman Kodiaks
– 839 fps with 14.3 grain Crosman Premiers
– 840 fps with 14.3 grain JSB

Gunby

HooWaa!

Mike

Plus, you can carry it around concealed!

What country do you live in? I admire your ingenuity.

In the U.S.A. our Constitution guarantees our right to keep and bear arms. However, there are always those trying to change that.

I have enough firepower to resist some government or individual trying to take my freedom for a bit. The only two things…Read more

That’s a beautiful gun pho…Read more

The “foot warmer” adhesive pads or electric mittens can’t get too hot or they would scald people. Therefore, I thought they might be a naturally safe…Read more

I’ve often thought about wrapping some of those self-adhesive “foot warmer” cloth things around a capsule or tank. You can buy them at Big 5 Sporting Goods or other camping/ sports stores.

My vision is of a cover for a tank that works like an electric blanket or heated mittens. A 9 volt batter…Read more

How much did the guy have to fork over?

I take it your .25 has a 24″ inch custom barrel?

Gunby

I’m headed for the Condor section to check it out.

Gunby

Gunby

I read where you stop at a place called Mac1 for airgun stuff. As I work within 25 miles, I drove by and bought some stuff on Saturday. One item was a good deal on a new Airforce CO2 adapter for $50.

Pretty neat place. Thanks for the tip.

Gunby