Talonairgun | haggard616 | Activity https://talonairgunforum.com/members/haggard616/activity/ Activity feed for haggard616. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 54ab8209f36d6db3e710c1f9bbe0a8f1 haggard616 replied to the topic Need LDC making advice from Donny and the rest of you.. in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/need-ldc-making-advice-from-donny-and-the-rest-of-you/#post-242962 Wed, 06 Jan 2016 22:08:45 -0400 That helps a ton, thanks Donny. I’ll just epoxy in place a washer or something similar. I didn’t think of the vent holes.. Another thing I’ll use. Don’t know what I’ll use for padding, perhaps some scotch bright or similar material. I guess I’ll just have to live with 6″. It’ll look much better anyway I’m sure.

]]> 04d5ee88e0920bd5ecc7ea4fcb9a7ca8 haggard616 replied to the topic Mrodair Compressor Guinea Pig in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-compressor-guinea-pig/page/4/#post-242931 Wed, 06 Jan 2016 07:48:30 -0400 The Shoebox isn’t made to fill a tank from empty?? Myself and my Shoebox didn’t get that memo.. We’ve successfully filled from empty with no problems. And like others, my Shoebox is also 2+ years with no problems- not even an oring change yet.

]]> 412deef859560a78901ab63cb1808c3e haggard616 replied to the topic high and low power adjusting issue?? (small change) in the forum Kalibrgun https://talonairgun.com/forums/topic/high-and-low-power-adjusting-issue-small-change/#post-233970 Sat, 15 Aug 2015 02:56:33 -0400 That’s good data. Have you tried the new Heavy Kings (34gr)? I’d like to know your opinion on those in the Cricket if you have..

]]> 300f111c8d7eb31c81c2804689e298b8 haggard616 replied to the topic Lurker #1 in the forum Airgun Technology https://talonairgun.com/forums/topic/lurker-1/page/3/#post-233957 Sat, 15 Aug 2015 01:47:16 -0400 quote donnyfl:When you looked down the barrel was it cocked like when Michelle did it?
Was this in a YouTube video? I have to see it if someone can remember the name or link

]]> ec20b019b32422744cc15193652834c1 haggard616 replied to the topic p30 velociraptor in the forum Other BullPups https://talonairgun.com/forums/topic/p30-velociraptor/#post-233903 Fri, 14 Aug 2015 05:53:05 -0400 I’ve received photos of 50yd groups..
Astounding. They’re demonstrating one at Lasso..
Mrodair is producing their own barrels now. If Mike can make them all half as good as the photos of the one I’ve seen.. I’m getting one. Absolutely!
Your also supposed to be able to adjust them up and really get them cookin’ if you want (1,000fps ++ in a .30!).

]]> 8eaa875ccdb3ab666b57b3200ca76989 haggard616 replied to the topic Cricket Rifle cal 22 Incoming - anything to know? in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-rifle-cal-22-incoming-anything-to-know/page/2/#post-233246 Thu, 06 Aug 2015 02:51:06 -0400 I know what you mean. I was real bummed about my first pcp- Marauder .25. I would shoot sitting in a lawn chair using a pair of homemade shooting sticks. I was getting 2″ groups when I first started. Of course I didnt know any better so I thought it was the Marauder and sold it for an AA s510. My thinking being that a “better” gun would allow me…Read more

]]> c5d31849e0eecef99facc0b6ce21ffe0 haggard616 replied to the topic AAAAAAHHHHHHHH!!!!!! in the forum Kalibrgun https://talonairgun.com/forums/topic/aaaaaahhhhhhhh/#post-233245 Thu, 06 Aug 2015 02:23:42 -0400 That really sucks dude. Tom Kaye will take care of your shoebox though! Mine had what I thought was an issue.. Tom sent me replacement parts free of charge even though I figured out there really wasn’t a problem.. He told me to keep the parts as spares anyway. Really good dude. And this isn’t an isolated incident.. He does it for every shoebox…Read more

]]> 7eeaaa54f16e53309bf45636f21f533e haggard616 replied to the topic Cricket Rifle cal 22 Incoming - anything to know? in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-rifle-cal-22-incoming-anything-to-know/page/2/#post-233230 Wed, 05 Aug 2015 23:38:46 -0400 quote birdman:Steel , forget the cricket and all the work that needs to be done on it in order to make it into a great shooting gun . Buy a Vulcan at least
in a .22 cal. and enjoy shooting a tact driver straight from the box without having to spend extra money on it in order to make it shoot the…Read more

]]> 6fe7be9bcd12fc3dc1981c83fa612d3c haggard616 replied to the topic Cricket Rifle cal 22 Incoming - anything to know? in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-rifle-cal-22-incoming-anything-to-know/page/2/#post-233151 Wed, 05 Aug 2015 05:04:39 -0400 Google search- Varmintair Cricket carbine .22
He did an extensive blog on the rifle in .22 & .25
Really good stuff with a bunch of pictures.

]]> ed503e9bc1899d556e3b69228140ae04 haggard616 replied to the topic Accurate shooting tips - UPDATED ON 2/11/2016 in the forum Kalibrgun https://talonairgun.com/forums/topic/accurate-shooting-tips-updated-on-2-11-2016-d22/page/3/#post-233086 Tue, 04 Aug 2015 06:35:46 -0400 I’m really worried about Leadpecker.. Where is he?
This guy has stickers on his gun and UNICORN bedsheets!! And Lead hasn’t said a thing?!

]]> d305d44351f8297213d6f6aeab6f8da0 haggard616 replied to the topic A 22 cal. Vulcan barrel from inside in the forum Airgun Technology https://talonairgun.com/forums/topic/a-22-cal-vulcan-barrel-from-inside/page/2/#post-232917 Sat, 01 Aug 2015 00:14:08 -0400 Wow, I usually never have to point out sarcasm on this forum..
But for those of you who obviously didn’t get my post- the guns, the barrel makers, it doesn’t matter! It seems like the newest kid on the block for some reason is also believed to have the best of everything.. And then the charm wears off and everyone is back to their senses. I wasnt…Read more

]]> 278117c92e72447873dc206e32849b32 haggard616 replied to the topic A 22 cal. Vulcan barrel from inside in the forum Airgun Technology https://talonairgun.com/forums/topic/a-22-cal-vulcan-barrel-from-inside/page/2/#post-232740 Wed, 29 Jul 2015 21:52:33 -0400 The smoothtwists’.. No, no… The LW… No, no.. BSA’s!.. Wait, no…CZ?? Hmm..
Edguns?… Ahh, no, no.. Can’t be..
Bobcats?… Ehh, well.. Perhaps.. No..
Crickets?? .. Nahh, no way..
Vulcans! Yeah, yeah.. They got the best barrel! Most accurate too! 🙄

Go shove your head in a cow pie.

]]> 9e6937044c630a28d7efbff82c084bf9 haggard616 replied to the topic Edgun eccentric LDC from Russia in the forum EdGun https://talonairgun.com/forums/topic/edgun-eccentric-ldc-from-russia/#post-231819 Sun, 19 Jul 2015 19:23:36 -0400 Maybe you could send the moderators disassembled? That way the owner could assemble them and the package would look like A bunch of parts to the untrained eye? That could be a way to avoid any hassle of shipping what looks like a firearm device.. I’m assuming that’s what your referring to being the hassle of shipping them?

]]> 547117a36235b9a2526cbdfde66b2bb3 haggard616 replied to the topic Anyone have/had a Daystate Huntsman Or variation of? in the forum Other Guns https://talonairgun.com/forums/topic/anyone-have-had-a-daystate-huntsman-or-variation-of/#post-231703 Fri, 17 Jul 2015 19:58:01 -0400 Yea I know. Air arms- Daystate- Hw100
They’re all so similar it’s a tough choice. One gun has something better than the other.
I had an AAs510 carbine.. Sold it to fund a Cricket. I want to try something new so it’s been between the Huntsman and HW. The Huntsman has its hiccups.. But the HW100 is heavyyy (owners say). I really don’t enjoy a heavy…Read more

]]> 59b8c26950d17ad448f06b7a44ea32b6 haggard616 replied to the topic a good pcp for my son! in the forum Other Guns https://talonairgun.com/forums/topic/a-good-pcp-for-my-son/#post-229762 Fri, 26 Jun 2015 13:08:54 -0400 I got my nephew a marauder pistol. With the adjustable carbine AR style stock, it fits him very well. And the low weight is another big plus. Also, he can pump it himself easily with a hand pump if you tune it for a low fill of 1,7k like I did. Lots of shots with barely any pumping hassle since the cylinder is only like 65cc. It’s a very hard gun…Read more

]]> a24ceebfec25b1c495d69124a792056d haggard616 replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/page/4/#post-229748 Fri, 26 Jun 2015 06:47:31 -0400 The sport carbine rifle is very cool looking! 40-60fpe for 80 shots in .25- not bad! If the actual rifle has the same kind of finish as this graphic, it’ll be a really cool rifle. I also like the biathlon style lever.

It looks like a very clean and robust gun. I also like the air gage.. As long as it has numbered readings. It’s hard to tell from…Read more

]]> e4b7bb22120141dfc2bc837af1d6cdd8 haggard616 replied to the topic moist on side of breech? in the forum EdGun https://talonairgun.com/forums/topic/moist-on-side-of-breech/#post-229747 Fri, 26 Jun 2015 06:35:27 -0400 Hey Phil.. How do you charge the smaller caliber pistol? It doesn’t have the foster on the end of the cylinder like the larger pistol.

]]> 2707260b702d18584643807ca370be10 haggard616 replied to the topic Cricket Picture Thread !! in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-picture-thread/page/15/#post-229416 Mon, 22 Jun 2015 02:45:05 -0400 Why do some Crickets have a polished stainless steel cocking handle, while others like mine, have the dull aluminum looking ones? Was that a production difference?

]]> 4477b5d300e5c28785ce3e2b89f88456 haggard616 replied to the topic New barrels in the forum General Chat https://talonairgun.com/forums/topic/new-barrels/#post-228934 Wed, 17 Jun 2015 03:22:52 -0400 What are the barrels for? Is he selling them individually? I wouldn’t mind having a .22 smooth twist to put on a prod 😛

]]> 572dd67b288f3768d51d875b96cd77ef haggard616 replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/page/2/#post-228924 Tue, 16 Jun 2015 22:09:17 -0400 I love Eds Advertsiements.. Sexy Russian women. Makes me want to move over there and open up a casting agency lol.. You know what I’m sayin?!

]]> 9e49109424cea034928a0c81aaba5670 haggard616 replied to the topic A little advertisement for Tony! in the forum Benjamin Marauder https://talonairgun.com/forums/topic/a-little-advertisement-for-tony/#post-227442 Wed, 27 May 2015 23:49:40 -0400 That’s nice. I’ve had a few foreign guns now, but the Marauder still has my attention. Especially with these very nice tactical style stocks. The graphics on the sunshade look good as well. Cool package.

]]> f02f067f9fc80eac54d5d9e125cb0743 haggard616 replied to the topic FX Wildcat at Joe Brancato for $300 to $500 off retail... in the forum FX Air Rifles https://talonairgun.com/forums/topic/fx-wildcat-at-joe-brancato-for-300-to-500-off-retail/page/3/#post-225586 Fri, 01 May 2015 03:18:22 -0400 Do these girls perform on Internet “cam shows?”
I already have my credit card out and waiting..

]]> 348261e535488a5fcb007583adb8603f haggard616 replied to the topic Cricket Picture Thread !! in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-picture-thread/page/12/#post-223852 Tue, 07 Apr 2015 22:42:00 -0400 quote birdman:Just be careful when you water it , you don’t want too many leaves growing on it or it may turn out to be a bigger shade tree
than you planned on .

FROM : THE BIRDMAN

Lol!! That’s funny because I planted that tree two years ago and…Read more

]]> 90767939e38806d71e42b8855eb6df51 haggard616 replied to the topic Cricket Picture Thread !! in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-picture-thread/page/11/#post-223802 Tue, 07 Apr 2015 01:40:22 -0400 A few days ago..
I love this extra tall bipod. Makes shooting while kneeling or sitting very comfortable.

]]> 0d4764c986e986d212ecacabe385d57a haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/3/#post-223800 Tue, 07 Apr 2015 01:37:36 -0400 Sure Sloth..
I haven’t bought the end mill or bit I need for the TP yet, so I haven’t finished mine, but I wouldn’t mind doing yours when I do. Im debating whether I should thread the end of the barrel 1/2-20 as well.. I just ordered all the gears I need to thread so I’m all set up now. Send me a PM of your email if you want.

]]> b0863abe73c51806a58afb7480ea1fde haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/2/#post-223135 Tue, 31 Mar 2015 00:37:46 -0400 So, I made my own grooving tool for the oring that needs to be inside the barrel on this marauder bullpup. I wasn’t sure if I could grind the tool thin enough to be able to fit inside the small .22 bore, and still have enough metal on the tool to be strong enough to do the job.. Well, it is! My barrel is now 90% complete.. All I need now is to…Read more

]]> b62c5ad49ee0735a50d4386698a654cf haggard616 replied to the topic Lubing for a cleaner barrel in the forum Kalibrgun https://talonairgun.com/forums/topic/lubing-for-a-cleaner-barrel/#post-223134 Tue, 31 Mar 2015 00:19:39 -0400 I have the same results. I lubed some Polymags for the heck of it with Ballistol, and there wasn’t any degradation in accuracy within the 50 yards I tested. I now just spray a new tin once I open it and don’t worry about it after that. Absolutely makes a difference in how long the barrel remains clean. As a matter of fact, I haven’t cleaned my…Read more

]]> 1564e8d82d63095c8dfe1d6fef7c806e haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/2/#post-222276 Thu, 19 Mar 2015 02:47:41 -0400 Thanks Gene, your internal threading guide will be helpful.
I found out some things about my lathe. Apparently it’s a pretty rare model. In fact, it’s the smallest lathe South Bend ever produced. It was made during the depression as an affordable model. It doesn’t have any gear box that can be retrofitted. I took the lathe apart last night so I…Read more

]]> fad73dd2838fc8ef739e913cc836f3a8 haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/2/#post-222158 Wed, 18 Mar 2015 02:29:51 -0400 Oh, and can you tell me what number MT my tail stock is? A rough measurement with a ruler says the quill opening on the tail stock is about 1/2″

]]> ba3f1a0b53357dc555a6ecab8c95529e haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/2/#post-222155 Wed, 18 Mar 2015 02:20:39 -0400 I found a Craigslist deal today Gene. I called the guy and he said he had someone coming to look at the lathe tomorrow, so I said I’ll come today! I’m glad I did. I believe I found a good deal.. It’s an 8″ south bend. It doesn’t have the quick change gear box or any extra gears, but from everything I’ve researched online so far, I should be able…Read more

]]> 59e3f3c182ecb2501583b949f06e06f0 haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/2/#post-222072 Tue, 17 Mar 2015 01:15:48 -0400 Sorry to hear that.
I think I will follow your advice Gene. I’ve been watching mrpete222, who is a retired teacher/machinist with a YouTube channel. If you haven’t heard of him, go over to youtube and check his channel out. He has hundreds, if not a thousand, videos showing how to use a few different lathes and mills. I can’t seem to find anyone…Read more

]]> cbc3880c54fd03e7fe099f269330fb3e haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/2/#post-221998 Mon, 16 Mar 2015 10:22:06 -0400 quote rj-porter:You need to lap the bore. Mine will shoot anything I feed it. Even the cheap crocman HP from Walmart.
Point is, there’s a bunch of things I could do.. and I’ve already chose.

]]> 0b45ac72bfec4330de19b14ad2763df1 haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/2/#post-221948 Sun, 15 Mar 2015 23:47:05 -0400 quote rj-porter:What’s wrong with your factory barrel. Just wondering. I have 2 prods and they are super accurate.
My Crosman barrel is also accurate with only Beeman FTS and Polymags. But I need to always keep it clean. I clean it after every shooting session. I probably wouldn’t have ever bothered with a new barrel, but AOA was giving them away…Read more

]]> 5ffaaca9935c5ff0860d93999b248c7f haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/2/#post-221946 Sun, 15 Mar 2015 23:38:01 -0400 Gene.. I’m curious what’s so unreasonable about that? I’m willing to help someone with their projects or around the shop just to learn and observe a skill. There are many retired mentors out there that wouldn’t mind the help and company. I’ve posted on a few machinist forums and have many offers from people who were just not close enough to able…Read more

]]> 513bce813a4bd1789de42eb8e5ba55ee haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/#post-221864 Sun, 15 Mar 2015 05:58:00 -0400 quote rj-porter:I don’t think the probe would fit through the magazine with the boring on it.
Damn! Nice catch, I didn’t think of that. Too bad.. I definitely wont sacrifice being able to use a magazine.

]]> 7c677c198defe7894c3fe9112395d2e6 haggard616 replied to the topic pretty sure i am hitting the shroud!!!!!! in the forum Kalibrgun https://talonairgun.com/forums/topic/pretty-sure-i-am-hitting-the-shroud/page/3/#post-221830 Sun, 15 Mar 2015 01:24:10 -0400 Precision is a good dealer, they’ll make it right.

]]> 8974335de6cdec17eb52b84c6c94dc68 haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/#post-221822 Sat, 14 Mar 2015 22:24:44 -0400 Hey…
Do you guys think it would be ok to have the bolt probe machined so you can put the oring on the probe?? Then the barrel wouldn’t need one..
I wonder if that would be ok?

]]> 8a5920d51afaf9ef308c1fc7eb1e3440 haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/#post-221733 Sat, 14 Mar 2015 01:49:20 -0400 I did. They said it’ll be $125. I haven’t sent it off though yet, I’m hoping to find someone local to me who has a lathe and is willing to teach me how to use one. I want to get my own medium sized lathed.. But only after I know how to use it.
An interesting thing to note- MarmotMilita sells there hammer forged barrels for the Prod for $140…Read more

]]> cf53d29345af60e92cd02c7ebaff2244 haggard616 replied to the topic .22 or .25 short or long and why in the forum EdGun https://talonairgun.com/forums/topic/22-or-25-short-or-long-and-why/page/3/#post-221493 Tue, 10 Mar 2015 21:39:37 -0400 Why’d you have to bring up juicy Spanish ass.. Airguns are the only thing that briefly get my mind off of it..

]]> aae467ed0237cffb2410d62d41a355b2 haggard616 replied to the topic This Mutant is gonna make a certain airgunner smile!!! in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/this-mutant-is-gonna-make-a-certain-airgunner-smile/#post-221485 Tue, 10 Mar 2015 19:35:50 -0400 I wish you all the luck Jaime!
I have to say though, let’s be realistic..
There are so many pups out now, and more to follow, that it’s going to be very hard for one in particular to do very well. Especially with the older “established” brands putting out new technologies for considerably lower prices than what people are used to paying..
The door…Read more

]]> f8dd75ee93877c42dbf03b78a9cf8dad haggard616 replied to the topic "NEW" FX Impact ... game changer in the forum FX Air Rifles https://talonairgun.com/forums/topic/quot-new-quot-fx-impact-game-changer/page/3/#post-221286 Sun, 08 Mar 2015 22:17:25 -0400 I’ve got the biggest hard on for the Impact. I’ll probably have to sell a lot of stuff..
I’m going to be very pissed off if it’s over $2k… And it most likely will. I wonder how much adjustment will have to be made if your switching the calibers from .22-.30? I’m guessing the regulator will have to be adjusted as well? I don’t know. The guys who…Read more

]]> 84ee8da164f32eccccbf821e544e75ac haggard616 replied to the topic "NEW" FX Impact ... game changer in the forum FX Air Rifles https://talonairgun.com/forums/topic/quot-new-quot-fx-impact-game-changer/page/2/#post-221226 Sun, 08 Mar 2015 00:33:41 -0400 There is soooo much new awesome stuff coming out. Did you see the Royal 400/500s in the background had carbon fiber bottles???

]]> 9bf56fe3458ff899348463c7d235f050 haggard616 replied to the topic Quickie review of lelya for those waiting. in the forum EdGun https://talonairgun.com/forums/topic/quickie-review-of-lelya-for-those-waiting/page/2/#post-221060 Fri, 06 Mar 2015 02:59:32 -0400 That MTC Connect looks like a winner. I may have to sell the Leapers compact and upgrade to the Connect.. Thanks for the info.

]]> 5ef2474b2bf9477175700945ef6d6b58 haggard616 replied to the topic What's your favorite gun under 2k? in the forum BullPup General Chat https://talonairgun.com/forums/topic/what-s-your-favorite-gun-under-2k/#post-221058 Fri, 06 Mar 2015 02:37:55 -0400 Manny.. Why did you sell your beast Prod pistol? You just got that thing finished and seemed excited and it’s already out the door??

]]> f311188501903ee81e2649439de124ae haggard616 replied to the topic FX Wildcat at Joe Brancato for $300 to $500 off retail... in the forum FX Air Rifles https://talonairgun.com/forums/topic/fx-wildcat-at-joe-brancato-for-300-to-500-off-retail/page/2/#post-221042 Fri, 06 Mar 2015 00:35:08 -0400 Damnit, a certain company put the squash on our backdoor smuggling. Bastards.

]]> 4f4fbe5a82af2ebb4269e141e4172caf haggard616 replied to the topic Just brought home new cricket. Now some ?'s in the forum Kalibrgun https://talonairgun.com/forums/topic/just-brought-home-new-cricket-now-some-s/#post-221041 Fri, 06 Mar 2015 00:31:31 -0400 I bought the cheap pack of rails from Pyramydair. I think you get two 4″ rails, and one 6″? It was like $15-20. They work well. They’re pretty tough too.. The coating hasn’t scratched up yet and I constantly take my bipod on and off. I used wood screws as well, with a little dab of wood glue on the threads while screwing in.

]]> 1ecb827593890476405c4c52c0ef9274 haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/#post-221038 Fri, 06 Mar 2015 00:27:34 -0400 Actually I had a different email for MarmotMilitaia.. I just went to the link you provided and sent them a new email. Thanks again.. I’ll update once I hear back from them.

]]> c36fe3def367c18ea0b8413d43310d2f haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/#post-221034 Thu, 05 Mar 2015 23:55:12 -0400 Wicked air rifles used to be MarmotMilitia right? If so, then yes.. I emailed 5-6 days ago and haven’t heard back. They should be able to do it as they make their own hammer forged barrels for the Prod..

]]> ef6a17bc5183c3f158e82a3895df5d92 haggard616 replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/#post-221011 Thu, 05 Mar 2015 21:01:37 -0400 Looks like I might.. I’m shocked I didn’t get any responses. It seems like there’s a lot of guys with lathes on here.
Would I have to send him my Prod barrel as well as the blank? So he can basically duplicate it. I’ve never sent anything off to be machined, so I don’t know the process. Do you have an idea of what his turn around time is? Thanks Caboose

]]> b8603fda2eacfa73bded6590f39c3985 haggard616 replied to the topic .22 or .25 short or long and why in the forum EdGun https://talonairgun.com/forums/topic/22-or-25-short-or-long-and-why/page/2/#post-221007 Thu, 05 Mar 2015 20:56:05 -0400 Oh yes, Ted.. The messiah lol
If Ted says length matters, it’s gospel.
Never mind common sense.

]]>