https://talonairgunforum.com/members/hogtyd/activity/ Activity feed for hogtyd. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 c5103bf49d27d7e06c0dc72d68135f88 https://talonairgun.com/forums/topic/another-noob-with-talon-vs-condor-questions/#post-228507 Fri, 12 Jun 2015 02:14:42 -0400 Welcome to the forum, I have been a owner and member of this forum for about 3 months. I share the same ambition as you on what I want from a pcp gun. I bought the condor SS and a chronograph and started from there ( the condor is a 22) it took a lot of shooting and ansewers from the very knowledgeable people of this forum I arrived at the point…Read more

]]> 83bf9029d54aca8c85a5c66b0b66ab01 https://talonairgun.com/forums/topic/condor-ss-trigger/#post-228071 Sat, 06 Jun 2015 00:09:38 -0400 If it is condor SS it has a 2 stage trigger.

]]> f18bbd3fbdc1a1ab84e12e3d6d49f050 https://talonairgun.com/forums/topic/hammer-install/#post-227812 Tue, 02 Jun 2015 02:42:15 -0400 Yes I did get it together ok. I just pushed the barrel thru till the bottom bushing showed in the power wheel slot the used a small Allen wrench turn it till it lined up with the hole in the shroud. Had more trouble getting the little screw for the power wheel lined up than the barrel bushing holes.

]]> 0c2993407e0f2dcd25175352d78d6b70 https://talonairgun.com/forums/topic/first-pcp-condor/#post-227374 Tue, 26 May 2015 19:44:19 -0400 Tom, I never gave a thought to fpe my main goal was to get the best accuracy and most shot count. I believe I have achieved that with my current settings. The no noise is a great bonus though. About all I hear when I pull the trigger is the the hammer hitting the bolt and valve. I am shooting with the smallest insert that comes with the ttth and I…Read more

]]> 10a1dff8621ad29e46f9c144423b667e https://talonairgun.com/forums/topic/first-pcp-condor/#post-227339 Tue, 26 May 2015 01:13:11 -0400 Hi Tom! I also have a condor in the 22 cal. Mine is an SS model so it has the built in silencer. After about 1000 shot and a prochrono I have finally found my guns sweet spot. I fill my tank to 2000 psi and shoot the jsb exact 18.1 grn. Pellet. Super accurate out to about 50 yrds and I get about 30 shots to a fill. I shoot down to about 1200psi. I…Read more

]]> a94f77e23e86a1fbb65273ba921876a5 https://talonairgun.com/forums/topic/22-cal-jsb-18-1-velocity/#post-227032 Thu, 21 May 2015 02:01:21 -0400 I have the ttth shooting with the smallest insert and the tt anti slap hammer. Psw on 2 with a 2000 psi fill. Fps on my chronograph starts at 800 drops to 765 after about 30 shots psi in the thank drops to about1600. At 40 yrds shooting off a rest ( not sand bags or vise) I can easily shoot a 1/2 group of 10 shots. This is what my condor SS with…Read more

]]> 225186cecf9b7b62ed7d08f20b979044 https://talonairgun.com/forums/topic/22-ammo/#post-226637 Fri, 15 May 2015 01:42:50 -0400 Hey phoneman
At what pressure and power wheel setting are you using on your condor SS? I to have that gun and I can’t get much accuracy with the jsb 25.3 grains. Mine likes the 18.1

]]> 2ad7005088686e6b246a63c867d24a96 https://talonairgun.com/forums/topic/1-1-pound-trigger/#post-226352 Mon, 11 May 2015 01:55:00 -0400 Thanks for the warning PB I did do a check as you mentioned and all is fine. Also thumped it pretty good on the floor several times on the but plate and moved the safety of and on about 30 times.

]]> 9aede561abe9fa14c0e5cff70da2dc69 https://talonairgun.com/forums/topic/another-repost-newbie-guide-to-airgunning/#post-226188 Fri, 08 May 2015 21:13:54 -0400 Rb3di
Thoughly enjoyed your post! You should write a book. Thank you for an entertaining article .

]]> e34b66b5f98d414bf73171ca5d87e2e8 https://talonairgun.com/forums/topic/1-1-pound-trigger/#post-226097 Thu, 07 May 2015 12:26:13 -0400 I did not take any pictures. Mainly because I haven’t been able to figure out how to post pictures on this forum.
Don’t be afraid to try to do this mod, it’s pretty easy. The biggest problem I had was getting the pistol grip back on.
Don’t mess with the spring closest to the the muzzel, that one has nothing to do with the trigger pull. It is what…Read more

]]> f0bd8a7e44e8bc10606355d2f8a71e1b https://talonairgun.com/forums/topic/bolt-slop/#post-225318 Mon, 27 Apr 2015 18:24:30 -0400 Ok, called Tony this morning. H said this is perfectly normal. If the velocity and accuracy are good do nothing

]]> 5b7cbffbd1a2d1b12c80159adca51b3e https://talonairgun.com/forums/topic/trigger-pics/#post-225283 Mon, 27 Apr 2015 12:27:49 -0400 Thank GKU I’ll give it a try when my patients are high.

]]> 2134d0d24ec20798281ae5ac06e04b5b https://talonairgun.com/forums/topic/trigger-pics/#post-225257 Mon, 27 Apr 2015 02:06:51 -0400 Ok, I don’t have to disassemble the trigger to change the springs, just remove the cover. Where is the cover located?
Is it the one on the bottom of the gun? I removed the for arm and it looks like there is one screw holding it down. If I remove the pistol grip and this screw will the cover come off? Will springs go flying?

]]> 77dc41c997e9ccd32840a1de4d2b4740 https://talonairgun.com/forums/topic/awfully-quite/#post-224126 Fri, 10 Apr 2015 23:05:34 -0400 Thanks for the tips lurker#1 i have heard before about the power wheel screw but not about the sear. How do you release it, just by uncocking the hammer? Can the hammer be removed thru the breach if you remove the bolt first?

]]> d74dbeec121a49ed78eb65c43be8825f https://talonairgun.com/forums/topic/hammer-install/#post-223699 Sun, 05 Apr 2015 23:19:19 -0400 I can understand how to get the barrel back into the shroud. But how do you rotate the barrel to line up to the holes in the shroud when there is no barrel to get ahold of after it is in side the shroud? The end of the barrel is down inside the shroud about 8 inches!

]]> 18f09776a37802f87b0bc7bb07cb00e0 https://talonairgun.com/forums/topic/spring-silencer/#post-222876 Fri, 27 Mar 2015 02:09:31 -0400 Thanks for the info. What do I have to do to get to the spring to add the shrink tubbing to the spring?

]]> 8ca6ee466eb0b264a4e83cd51f2d3953 https://talonairgun.com/forums/topic/spin-lock-tank/#post-222693 Tue, 24 Mar 2015 14:10:28 -0400 You can turn the tank counterclockwise wise being careful not to crash the air gauge into the frame. The tank will then be loose. Loosen the Allen screw on the left side of the collar and spin the lock ring off the tank. Then simply remove the tank out the back. My condor SS was missing the wrench when I got it and this is how I refilled the tank…Read more

]]> c09c1be0689241a6b710026f04481ed0 https://talonairgun.com/forums/topic/bolt-o-rings/#post-222482 Sun, 22 Mar 2015 00:49:18 -0400 Got a jar of divers silicon today from the dive shop where I got my tank. They fill tanks for a lot of air gunners . The owner said the o rings in my gun are what is called static o rings. They expand out when the air pressure comes up behind them then shrink back when in disapates. This is about the only time they really touch anything. But the…Read more

]]> 913d1590c3ba5365131bd20b6ab225ab https://talonairgun.com/forums/topic/clipping-problems-in-the-condor-ss/#post-222480 Sun, 22 Mar 2015 00:42:41 -0400 Had mine apart for the first time today. Inspected the baffles the wave washer and end cap. Everything was fine no clipping just a light buildup of lead powder and oil on the baffles. Just did this to check, I had no accuracy issues.

]]> 55704132d6520771c37581c17b0b93cd https://talonairgun.com/forums/topic/luxfer-scuba-tanks/#post-222343 Thu, 19 Mar 2015 21:19:12 -0400 Correct! Now all I need is my prochrono to arrive and I am ready to start tuning my condor SS

]]> e223aed9e66238690836addeeb743987 https://talonairgun.com/forums/topic/spin-loc-wrench/#post-222297 Thu, 19 Mar 2015 12:37:04 -0400 My condor SS was also missing the envelope containing the wrench and Allen keys. Called Airforce and they mailed it to me free!

]]> a0bcdcbc466df8f0e92eec28682ffc07 https://talonairgun.com/forums/topic/bolt-o-rings/#post-222237 Wed, 18 Mar 2015 20:47:28 -0400 Thanks for the replys gentlemen. That is a relief to know mine is normal. I didn’t feel any air escaping around the breach when fired so I was hoping it was normal. As for my friends talon, I did shoot it with a little rem oil around the breach which made it a little slicker but is still a little tight. I have watched airforce’s video and they…Read more

]]> 148d63bb153149775cc60b6f18ead206 https://talonairgun.com/forums/topic/top-hat-polish/#post-222003 Mon, 16 Mar 2015 12:30:13 -0400 Ok, thanks guys. I kinda figured that would be the amsewrs. Will admit it does look cool but I doubt the air is in the top hat
Long enough for the smoothness to make much difference.

]]> 568d6a9fa7d8fa103b59ec4e6d880046 https://talonairgun.com/forums/topic/pics-of-new-condor-ss-trigger/#post-221820 Sat, 14 Mar 2015 21:44:46 -0400 Would some one please post some pictures and instructions on how to remove the trigger and parts fom the gun. I would love to do the spring mod but am afraid to start tearing into this this stone cold? Also, I am assuming this is the new 2 stage trigger that comes stock in the condor SS

]]> add46a7b34be745daf6b5b3d68085c2b https://talonairgun.com/forums/topic/condorss-barrel-polishing/#post-221658 Fri, 13 Mar 2015 09:51:14 -0400 Seems everyone uses the divers silicon for lubing. Where can you buy this stuff. Never heard of it.

]]> eda79c7594a587a5baf18d3fb89f2bad https://talonairgun.com/forums/topic/starting-point/#post-221653 Fri, 13 Mar 2015 08:19:41 -0400 Thanks for the info salt, I do not own a chronograph and have no idea where this beast is shooting. Guess I will have to get one. I left the power wheel setting where the factory set it. Only thing I have done is add the oring to quite it down and up the shot number. At 25 yrds I can shoot a 1/2 group easily and kill the crap out of starlings but…Read more

]]> f43da1c3a0236c84b723e4a388903cd7 https://talonairgun.com/forums/topic/top-hat-oring/#post-221166 Sat, 07 Mar 2015 02:05:07 -0400 Thank you lurker1 and onebaddjI did not receive my condor today due to the weather slowing down fedx. They say tomorrow now. I also ordered a prochrono from Amazon today. I will follow your suggestion and establish some data with the chrono before installing the oring thanks again for you help.

]]>