Talonairgun | hunter-001 | Activity https://talonairgunforum.com/members/hunter-001/activity/ Activity feed for hunter-001. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 35e5d2994d65b1c90e4f8cb8348ded9c hunter-001 replied to the topic Need instructions to de-pressurize a gen 3 vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/need-instructions-to-de-pressurize-a-gen-3-vulcan/#post-251628 Sat, 23 Apr 2016 00:09:22 -0400 Just replace the hammer spring with small plastic tube. I used part cut off ballpen
Then screw powe adjuster Very Gently in.

]]> 7f62a59ff2b7fa7bb0a252436931aa27 hunter-001 replied to the topic My New Vulcan Tactic 25 Cal in the forum Airgun Technology https://talonairgun.com/forums/topic/my-new-vulcan-tactic-25-cal/#post-247896 Sun, 06 Mar 2016 16:09:22 -0400 Very nice looking rifle. ES over 45 shot is not bad at all.
Do you have a vulcan? And if so how do you compare the two.

]]> d0d01360633f7fea67456450452f8586 hunter-001 replied to the topic Hammer spring seized in the forum Airgun Technology https://talonairgun.com/forums/topic/hammer-spring-seized/#post-247824 Sat, 05 Mar 2016 23:40:39 -0400 Anticlockwise

]]> 5cd9e4d831bb30347986e720d02057b6 hunter-001 replied to the topic reg tester in the forum Airgun Technology https://talonairgun.com/forums/topic/reg-tester/page/2/#post-245796 Thu, 11 Feb 2016 11:33:56 -0400 Very good idea Kris. Well done.
Will not be able to use it myself because I have just found out
That my Vulcan got no vent hole.

]]> c02019d8d2b1443967240e38a059e3ab hunter-001 replied to the topic Vulcan air cylinder. in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-air-cylinder/#post-239719 Thu, 19 Nov 2015 17:12:46 -0400 quote PCPAG:Cricket AT capacities:

22 cal Cmpt. 250 cm
22 cal Std. 280 cm
25 cal Std. 350 cm
Thanks mate

]]> 67ca1f0df92b10c13d394bfa7635c56e hunter-001 replied to the topic Vulcan 177 shooting string in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-177-shooting-string/#post-239701 Thu, 19 Nov 2015 10:51:35 -0400 quote octavius:Vulcan or Cricket were not been designed work sub 12flfbs without necessary changes. 😉

Czech Republic
In the Czech Republic anyone over age of 18 can acquire air gun with a muzzle energy not exceeding 16 joules (12 ft·lbf)
So you think they should know better about making a 16 Joules but they don’t.

]]> fb25af96ba003a699e973c6d3342c166 hunter-001 replied to the topic Vulcan 177 shooting string in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-177-shooting-string/#post-239679 Thu, 19 Nov 2015 01:58:09 -0400 This is 12ftlb Vulcan and it came with short spring and metal spacer.
I have replaced the spacer and the brass spring guide with a custum made derlin with thick shoulder.
This reduced the hammer slap, made the gun more consistent. Small spring made gun cocking effortless.
And adding HW100 silence made it less pretty but very very quite.
[url][/url]

]]> 939686ec1b01ba6e4398b5d439bc6758 hunter-001 replied to the topic Vulcan 177 shooting string in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-177-shooting-string/#post-239672 Thu, 19 Nov 2015 01:31:05 -0400 quote kris::8:

I bet it was not like that out of box. well done
that rocks.

Kris, I am sure you have seen this before.

Regulator before
[url][/url]

Regulator after

Hammer spring before

And after

]]> af6617707522c52cf35038cc6436da15 hunter-001 replied to the topic Vulcan 177 shooting string in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-177-shooting-string/#post-239667 Thu, 19 Nov 2015 00:44:05 -0400 :rofl: :rofl: :rofl:

]]> e7a71920270d6effb49190d79fd0b00a hunter-001 replied to the topic Vulcan REGULATOR Remove & Replace in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-regulator-remove-amp-replace/#post-239666 Thu, 19 Nov 2015 00:38:46 -0400 Degasing tool
[url][/url]

]]> f4db6e7b814c52f7d334c1ca40ee8fdf hunter-001 replied to the topic Vulcan REGULATOR Remove & Replace in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-regulator-remove-amp-replace/#post-239665 Thu, 19 Nov 2015 00:29:37 -0400 This showed regulator with factory setting at 90 Bar
[url][/url]

This after regulator turned dawn to 65 bar
[url][/url]

]]> bca21cb3bd3b010eb5ff7dacc6481593 hunter-001 replied to the topic Vulcan REGULATOR Remove & Replace in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-regulator-remove-amp-replace/#post-239633 Wed, 18 Nov 2015 16:55:18 -0400 I am not sure about the date at which they have changed the regulator shape.
To remove the regulator
1- degas the gun. I have done this by replacing the hammer spring with cut off of Ballpen like this one
http://www.piercingglance.com/basik-ballpen
Turn power adjuster in slowly until hammer open the valve. Easy, clean and no leak.
2- remove the…Read more

]]> cfd7d9d9d65ed0be9c6929492d562c4a hunter-001 replied to the topic Fuxineering My Vulcan 0.22 from Talon Tunes in the forum Airgun Technology https://talonairgun.com/forums/topic/fuxineering-my-vulcan-0-22-from-talon-tunes/page/4/#post-239626 Wed, 18 Nov 2015 15:13:31 -0400 quote benj397:quote Hunter 001:Instruction available in pdf download on Air chrony website.

I found the instructions for the Air Chrony but not instructions for the PC software. Do you have a link?

Here is the link to download software and chrony instruction.
http://www.air-chrony.com/en/content/7-download

Once connected to PC you need to…Read more

]]> 8915cc90c4db904ce9c7fb65e1cb9723 hunter-001 replied to the topic Vulcan REGULATOR Remove & Replace in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-regulator-remove-amp-replace/#post-239617 Wed, 18 Nov 2015 12:03:35 -0400 quote LURKER #1:Do not try this at home or abroad as working with high pressure air is dangerous ❗
BUT ther are videos and instructions on the internet that may not be complete enough so I decided to learn as I proceed from instructions provided by “kris” and his and others help.
It is difficult to do this all in one post so bear with me.…Read more

]]> 2d17c12e7fd970166a3d08ee8ec38a6a hunter-001 replied to the topic Fuxineering My Vulcan 0.22 from Talon Tunes in the forum Airgun Technology https://talonairgun.com/forums/topic/fuxineering-my-vulcan-0-22-from-talon-tunes/page/3/#post-239556 Tue, 17 Nov 2015 18:04:10 -0400 quote benj397:quote Sir Ville:quote octavius:Really big advantage of Czech airchrony is you can measure in all weather condition including sun or absolutely dark. I have combro from UK also chrony M1 but all sold it and get airchrony. The best chronograph what i had.

I agree ! A very good Chrono. Never misses a beat.

So do you have one connected…Read more

]]> 82dbe88e02518ca9c983b723055e4396 hunter-001 replied to the topic stock finish in the forum Airgun Technology https://talonairgun.com/forums/topic/stock-finish/#post-239333 Sat, 14 Nov 2015 19:26:32 -0400 Pictures ?

]]> 5a9a9dc7b5bf3a2cbeedd52043b22850 hunter-001 replied to the topic A Vulcan Rifle, Could It Be? in the forum Airgun Technology https://talonairgun.com/forums/topic/a-vulcan-rifle-could-it-be/#post-239326 Sat, 14 Nov 2015 16:52:38 -0400 Where is the first post on this thread gone?

]]> 429a0033d023d1ea405304166f1107e1 hunter-001 replied to the topic Barrel thread in the forum Airgun Technology https://talonairgun.com/forums/topic/barrel-thread/#post-239088 Tue, 10 Nov 2015 17:34:32 -0400 This one sure will fit. Then my use HW100 silencer.
http://www.ebay.co.uk/itm/GunTuff-14-15mm-To-1-2-UNF-Air-Rifle-Pistol-Airgun-Silencer-Moderator-Adaptor-/231351868710?hash=item35dda55d26:g:PWwAAOSwDN1UMBuo

]]> dbd136f4966d18caf4ab12bb8b836f66 hunter-001 replied to the topic Barrel thread in the forum Airgun Technology https://talonairgun.com/forums/topic/barrel-thread/#post-239079 Tue, 10 Nov 2015 16:29:53 -0400 Would this adaptor fit the barrel?
http://www.ronniesunshines.com/air-arms-s200-1-2-unf-silencer-adaptor

]]> 6dde4995c33eaf77b758eb77d0011e07 hunter-001 replied to the topic That Pesky Breach O-ring!!!! in the forum Airgun Technology https://talonairgun.com/forums/topic/that-pesky-breach-o-ring/#post-239009 Mon, 09 Nov 2015 15:09:19 -0400 Watch this video

]]> d39f6613fe80d3f4308c8e29907fa1ef hunter-001 replied to the topic valve return spring setting in the forum Airgun Technology https://talonairgun.com/forums/topic/valve-return-spring-setting/#post-238447 Sun, 01 Nov 2015 21:04:58 -0400 Not sure about the Vulcan but have seen this video about cricket.

]]> 98a352b49858ce8db4d61ee726cdb600 hunter-001 replied to the topic .25 Delrin hammer spring guide to reduce spring noise in the forum Airgun Technology https://talonairgun.com/forums/topic/25-delrin-hammer-spring-guide-to-reduce-spring-noise/page/5/#post-238437 Sun, 01 Nov 2015 16:28:09 -0400 Kris. If you will try this can you do ten shot string with and without to see of there will be a change in FPS spread.
Vulcan 177 and 22 got the brass spring retainer to reduce hammer bounce to save air but more important to reduce FPS.
This is not needed in 25 caliber as regulator pressure is hight at 150 Bar so any hammer pounce will not be…Read more

]]> 458a5caba3a1a0bcae0f6d5614e1e780 hunter-001 replied to the topic .25 Delrin hammer spring guide to reduce spring noise in the forum Airgun Technology https://talonairgun.com/forums/topic/25-delrin-hammer-spring-guide-to-reduce-spring-noise/page/5/#post-238418 Sat, 31 Oct 2015 22:57:27 -0400 The outer diameter of the shoulder should be at least 12.7 mm or better slightly more. This one OD is 10 mm so it will push the hammer whole way and it will not stop against the action. This theoretically my reduce shot count due to hammer bounce.
Also with thickness of just 1.5 mm I wonder if it is strong enough.

]]> eeceb9948b0fd5c6db03d231879b3f30 hunter-001 replied to the topic Fuxineering My Vulcan 0.22 from Talon Tunes in the forum Airgun Technology https://talonairgun.com/forums/topic/fuxineering-my-vulcan-0-22-from-talon-tunes/#post-238097 Mon, 26 Oct 2015 16:15:22 -0400 Very nice white up and very Vera picture.
Just wonder about using grommets on the hammer spring. In any PCP we used to polish the hammer, smooth the springs ends and avoid using any grease to make the gun very consistence and reduce FPS spread but here we are fixing something to the hammer spring which in theory may affect consistency.
Now I have…Read more

]]> 27e865f84d980a3014135cb2663466f8 hunter-001 replied to the topic Velocity goes way UP when off the regulator...? in the forum Airgun Technology https://talonairgun.com/forums/topic/velocity-goes-way-up-when-off-the-regulator/page/2/#post-237961 Sat, 24 Oct 2015 15:18:40 -0400 Personally I don’t think there is any gain from reversing the rail.
Here is a picture of a Vulcan with connect scope.
Kris, I believe you get the help you are after From a Milidot scope on the other forum
If you know what I mean.
Good luck.
Cheers

Sorry unable to attache picture.

]]> 635201d0eb2a7b669d229d393c766e9c hunter-001 replied to the topic Velocity goes way UP when off the regulator...? in the forum Airgun Technology https://talonairgun.com/forums/topic/velocity-goes-way-up-when-off-the-regulator/#post-237918 Fri, 23 Oct 2015 22:35:10 -0400 Hi Kris
Did your Vulcan came with short hammer spring and a spacer? And what was the power at 200 bar.

]]> bd5a6f79a55a89fc16a6c4f32fe876a6 hunter-001 replied to the topic New .22 Vulcan arrived today! in the forum Airgun Technology https://talonairgun.com/forums/topic/new-22-vulcan-arrived-today/#post-235838 Fri, 18 Sep 2015 22:30:37 -0400 Very nice gun, ism sure you will enjoy it.

]]> 0a183fa2a5ea11561f80cf131e93703b hunter-001 replied to the topic where are the Vulcan Parts Diagrams? in the forum Airgun Technology https://talonairgun.com/forums/topic/where-are-the-vulcan-parts-diagrams/#post-235727 Thu, 17 Sep 2015 00:56:57 -0400 Here you go

]]>