Talonairgun | ironarmknives | Activity https://talonairgunforum.com/members/ironarmknives/activity/ Activity feed for ironarmknives. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 52549e14f23b6e167555ae6ec19fbfde ironarmknives replied to the topic 50yd .22 vet. new sumo ldc in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/50yd-22-vet-new-sumo-ldc/#post-268281 Mon, 10 Apr 2017 03:37:26 -0400 quote Bizill:That was the route I was thinking. Except the fact you have a real Atlas, or a better clone than most? I’ll be going the clone route.
real

]]> 373fa6281f1d4990f2a8eeead631081a ironarmknives replied to the topic 50yd .22 vet. new sumo ldc in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/50yd-22-vet-new-sumo-ldc/#post-268279 Mon, 10 Apr 2017 01:18:45 -0400 i just took a rail and drilled the holes no need for counter sinking the nuts in back because there lots of room used 1″ bolts with washer and lock nut
the 1″ come just right for the washer and nut but lots of cutout wood inside the stock never close to the air tank my vulcan i had to counter sink so as not to hit .

]]> 517f372376657e2c81ab04f7afd1c0a2 ironarmknives replied to the topic 50yd .22 vet. new sumo ldc in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/50yd-22-vet-new-sumo-ldc/#post-268274 Sun, 09 Apr 2017 20:39:40 -0400 ya smother than the vulcan i had both where pellet on pellet both better shooters than me but the safety is nicer on the veteran, i never had the side lever on the vulcan just bolt ,but the veteran is smooth cocking the double feed fix is great and with the new ldc even more quiet than the fatboy…. and way more quiet than the vulcan .. but my…Read more

]]> 7128e03d7f68c5a579f076d63b26e097 ironarmknives replied to the topic mouse fart ? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mouse-fart/#post-267997 Sat, 01 Apr 2017 00:10:27 -0400 cool played with it some today still only with 14.3 gr its pellet on pellet so a good shooter doing them at 937fps with all luck that will put the 16gr at 890-900 we’ll see tomorrow good shooter though

]]> 648dc1a6b332eed07644e53eeb9c8e31 ironarmknives replied to the topic mouse fart ? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mouse-fart/#post-267989 Fri, 31 Mar 2017 16:26:01 -0400 quote Ranger08:The factory velocity (1000+) is definitely wayyyyy too high. The gun will be louder and so will the impact of those light pellets! I would think somewhere around 900-910 should tone it down quite a bit. You should be able to do that with the HST adjustment. (I use mine at around 880-890 with 18 grain pellets and it is wicked…Read more

]]> 02053ab5bd5b1fccc947bb4956005070 ironarmknives replied to the topic getting a woody for my WarP .22 in the forum Other Guns https://talonairgun.com/forums/topic/getting-a-woody-for-my-warp-22/#post-267515 Sun, 19 Mar 2017 23:07:10 -0400 just got to the stock todayAttachments:

]]> c283cd2bf0c57a3570e6555925399f1d ironarmknives replied to the topic X-Sight + D48 = 78 yard squirrel in the forum Optics/Nightvision https://talonairgun.com/forums/topic/x-sight-d48-78-yard-squirrel/#post-266974 Sun, 05 Mar 2017 14:22:56 -0400 nice

]]> 62461db50782e327b6a667a3f140be29 ironarmknives replied to the topic Warp Vs Flex? in the forum Other BullPups https://talonairgun.com/forums/topic/warp-vs-flex/#post-266496 Tue, 21 Feb 2017 12:05:58 -0400 i have both warp .22 and a flex .30-.308
the warp is ok quiet if powered up if u shoot at about 800fps is not bad about like my vulcan .25 with ldc …when i put my flex ldc on the warp it make it a lot quieter think i might have a new ldc made for it neil maybe can do something with it …. the flex shooting the .30 is a tack driver at 930fps…Read more

]]> 802df9197b53293819efb7233c0c57a0 ironarmknives replied to the topic 14" barrel mutant shorty ? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/14-quot-barrel-mutant-shorty/#post-265196 Mon, 23 Jan 2017 15:49:20 -0400 ya now i have money can’t find one LOL for the right price there are a few but they want 200. more than everyone else just won’t do it !!! LOL

]]> a846ec16f7aed9105f926659c4abf12f ironarmknives replied to the topic vulcan and the iPhone in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-and-the-iphone/#post-249889 Tue, 29 Mar 2016 10:23:40 -0400 it make shooting harder because u can’t shoulder the rifle right so i might make a bracket to come off the stock ” just something quick that clamps on and off’ just to stable the gun better but when shooting from the bench its ok . I LIKE HOLDING THE RIFLE AND SHOOTING THERW THE SCOPE BETTER .

]]> d01ab53d2264807538a680eebca100c3 ironarmknives replied to the topic vulcan and the iPhone in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-and-the-iphone/#post-249877 Tue, 29 Mar 2016 04:22:12 -0400 no iphone 5 slowmo
yes iPhone 6s 240fps slowmo
I’m sure iMovie could do something but the iPhone 6s has slow mo built in no iMovie needed in “airgun nation forum ” under “cameras and video” read that and u will learn lots … or just look up youtube camera scopes ….

]]> d2049b4971fe6fce188038ddb63ca343 ironarmknives replied to the topic vulcan and the iPhone in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-and-the-iphone/#post-249871 Tue, 29 Mar 2016 02:51:32 -0400 its a iPhone 6s and its just a pvc pipe with plastic screws to hold it on with a pipe that slides in and out for focus with a end cap with a hole drilled in it with a kraylex phone case i molded to hold the phone in the right place ….. i’ll send a pic…



]]> 3f87a821487efbcc40e8d212721300c3 ironarmknives replied to the topic some derf. pellets used in the forum Airgun Technology https://talonairgun.com/forums/topic/some-derf-pellets-used/#post-247669 Fri, 04 Mar 2016 11:36:37 -0400 quote mikewh:Another happy V owner then.
I have found with my .25 that for longer ranges the JSB are best.
Not knowing what a copenhagen can is could you measure the groups or advise what the bull size is.

Safe shooting
about the size of a h%n pellet tin …..as for the bull size “small” LOL after this weekend i’ll have some more test done at 5…Read more

]]> 6e62d00959b14531c27d236c83ae29da ironarmknives replied to the topic vulcan to-be rifle bench and shooting vice in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-to-be-rifle-bench-and-shooting-vice/#post-247276 Mon, 29 Feb 2016 02:54:55 -0400 in due time first need to get it all fixed up.. all the clamps to hold the rifle clamps like the p3 and a “y” for the front of the gun i’ll get that tomorrow and some welding …. it bolts up tight as heck with “L” brackets and bolts so just need the right bracket to make the clamps to hold the rifle it will come together then paint and yes red w…Read more

]]> fade233264bc02299db5d8ccd408e2a1 ironarmknives replied to the topic Vulcan .25 new hammer in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-new-hammer/page/3/#post-246698 Sat, 20 Feb 2016 14:12:50 -0400 quote Rford71:Ironarmknives, do you live in the states? I emailed him on 2/12 hopefully I should have mine soon.[THUMBS UP SIGN]

Sent from my iPhone using Tapatalk
yes in san diego…. i told him i would have someone on this site give him head if he sent them right away …LOL and he did … really i just emailed him last week told him my gun numbe…Read more

]]> a4e9843ed807d87a280ccd46821141a3 ironarmknives replied to the topic new caldwell chronograph in the forum Airgun Technology https://talonairgun.com/forums/topic/new-caldwell-chronograph/#post-246697 Sat, 20 Feb 2016 14:06:00 -0400 i get pellets today so i’ll play some and see what i can do… got istrelok app on the iPhone it has my swfa reticle so gonna use derf. pellets weights and make up some dope pic’s and put them on my phone that way i’ll have them to look at when shooting derf. pellets for hold overs … until i can remember what they all are …

]]> e2b0f36d5238b537db154952c5b46586 ironarmknives replied to the topic Vulcan .25 new hammer in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-new-hammer/page/3/#post-246695 Sat, 20 Feb 2016 13:56:35 -0400 got my new hammer and spring and 22 screws yesterday in the mail it took only one week from evgeny thanks

]]> a8175dbde02f057459c4f961cb3b61b2 ironarmknives replied to the topic new caldwell chronograph in the forum Airgun Technology https://talonairgun.com/forums/topic/new-caldwell-chronograph/#post-246236 Sun, 14 Feb 2016 18:39:05 -0400 thanks did that it all work cool

]]> 7fdc6af924ed8da38f77e2b1d7dcccbd ironarmknives replied to the topic Vulcan .25 new hammer in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-new-hammer/page/2/#post-246215 Sun, 14 Feb 2016 13:57:32 -0400 just got email from Evgeny he’s sending me hammer & spring and screws #48 he recommends replacing them i asked if he’d tell me why the hammer and spring was being replaced and what the def. of the new one was … i’ll let u know what he says….

]]> 355bcadffdcb2734dbe1f125988c0d44 ironarmknives replied to the topic Vulcan .25 new hammer in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-new-hammer/#post-245812 Thu, 11 Feb 2016 13:21:53 -0400 quote Zonk:Yes they are free to anyone who already has a .25, that’s per Evgeny. I may end up getting one this summer also.
Ok I have one of the newer Vulcans got it last month does it have the newer hammer ? Or is there even a newer one ? And who do we talk to link please ! Is this for the ping noise” depinger” or ?

]]> 1593ffe32dad2c7045159a8eafed7b4f ironarmknives replied to the topic vulcan bipod installed in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-bipod-installed/page/2/#post-245583 Tue, 09 Feb 2016 17:19:12 -0400 my atlas bt10-lw17 swivels and has a 15derg cant left or right “tilts the gun” so much i can see my fastfire which is on a 45 derg mount without moving my head much the swivel is hard but they say it will get better after its used some and like the pics 45derg forward 90 or 45 derg back ..it even fits in the vulcan gun hard case without taking it…Read more

]]> 54be55e619bb6348abe8a405a835ec4f ironarmknives replied to the topic vulcan bipod installed in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-bipod-installed/#post-245558 Tue, 09 Feb 2016 03:45:07 -0400 ok i have a atlas bt10-lw17 adm qd another army brother had one he gave it to me he put the longer atlas on his 308 he had four of them so now i have one he still laughs at me for having a pellet gun ….. so now i will sell the harris for 50.00 and try to find a guppy size 4500 tank to put in the backpack for hunting …..

]]> 56a1f54fff98b6dadb5664d23ed9ad47 ironarmknives replied to the topic keyser !!!! swfa sight pic. ? in the forum Airgun Technology https://talonairgun.com/forums/topic/keyser-swfa-sight-pic/#post-245457 Mon, 08 Feb 2016 07:00:29 -0400 quote keyser soze:Also that is a 50 yard zero. I did’t mean that photo to be a dope card for your scope. The truth is to be uber accurate you not only need to know your zero, but your velocity, drag profile and BC. Anyone can use generic information out to 100 yards, but to make kills out to 200 plus you need to figure out that gun/pellet combo…Read more

]]> cf54e7fafb8398cb8e45d80c9ad56e42 ironarmknives replied to the topic vulcan bipod installed in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-bipod-installed/#post-245432 Sun, 07 Feb 2016 23:07:17 -0400 quote Zonk:I’m not putting my other atlas on my Vulcan. I like it just the way it is. Much easier shooting out of the truck window without it.
ya today i went to a indoor gun range and wish i had the atlas because of the way u could move the legs forward to lower the rifle the table was to tall and my harris bipod made me sit up real tall just to…Read more

]]> 9f861d7bc3a54cee7d9696550da8e4ea ironarmknives replied to the topic vulcan bipod installed in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-bipod-installed/#post-245375 Sun, 07 Feb 2016 15:05:34 -0400 quote Cricket:What rail is it and how long exactly? Looks sweet!
sorry a dove landed outside had to add to the dinner plate……
it is a 6″ UTG picatinny mil-spec rail….. and the small rail is 2″ UTG rail also

]]> 40e8eb9b30782e2adf839183f7924773 ironarmknives replied to the topic burris fastfire + swfa 16x long & short vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/burris-fastfire-swfa-16x-long-amp-short-vulcan/#post-245045 Thu, 04 Feb 2016 11:35:48 -0400 Thanks “Keyser” for your help on steering me in the right ball park with the mount and scope….. u did ok for a old man….LOL

]]> 6d9faef364c8098b5b2e5d2908c5bd56 ironarmknives replied to the topic burris fastfire + swfa 16x long & short vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/burris-fastfire-swfa-16x-long-amp-short-vulcan/#post-245040 Thu, 04 Feb 2016 11:13:56 -0400 quote amjadck:quote ironarmknives:ok got my fast fire lll on with my swfa 16x …. didn’t have time to get it sighted in yet got dark but did get the fastfire hitting half dollar at 20 yards …so this weekend i’ll get the swfa sighted at 50 yards not 30 like now…. with all luck i’ll be good for 30-250 yards with the swfa and my 20moa mount and the f…Read more

]]> 8144791412077be8c1897405de96c15b ironarmknives replied to the topic burris fastfire + swfa 16x long & short vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/burris-fastfire-swfa-16x-long-amp-short-vulcan/#post-245016 Thu, 04 Feb 2016 03:06:11 -0400 quote oakey631:you will easily hit a half dollar at 135 yards with that scope mounted properly on that gun using your turrets and strelok program
ya i got a crow at 150 in the head yesterday the swfa16x was like the crow was across the street love it. ….. the fastfire will get the rabbets that pop up at 20 yards when hunting ….

]]> 6b68406b3346b7ab9299ac7554bab8cf ironarmknives replied to the topic nightforce on vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/nightforce-on-vulcan/#post-244750 Mon, 01 Feb 2016 01:23:10 -0400 quote Ginuwine:Ironarmknives: What kind of LDC do you have on there? (Donny, Neil, or someone else) and how much was it?
pm sent

]]> db16ee1ad90e5697f93cecf0e8cbdb2c ironarmknives replied to the topic hi Sniperqty in the forum Airgun Technology https://talonairgun.com/forums/topic/hi-sniperqty/page/2/#post-244748 Mon, 01 Feb 2016 01:08:38 -0400 i have seen your videos didn’t know what u where saying but they where watched … its nice to hear what u have to say ….i’m in san diego ca. i’ll be watching these post can’t wait……

]]> 1cbb4eb3b701f333686f1f79274592fc ironarmknives replied to the topic nightforce on vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/nightforce-on-vulcan/#post-244709 Sun, 31 Jan 2016 17:17:47 -0400 ok read zero in at 20-25 yards then at 50 or 100 yard which ever you shoot more i will do at 50 yards…. then loosen the three allen screws turn knob back to zero tighten back allen screws looks like my up-down knob is at 4 we’ll see if it goes down to 3 like someone else’s i saw when it stops raining i could only site in at 15 yards today b…Read more

]]> c7dcf8b275c6eea390d0ebaaef0cb65e ironarmknives replied to the topic nightforce on vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/nightforce-on-vulcan/#post-244704 Sun, 31 Jan 2016 15:05:24 -0400 when sighting in this scope what range should i sight it in at “what is the close sight in i know theres a intersection close and far ,and read sight it in at 50 yards …. but at home i have 20 yards for sure maybe 30 yards if work at it …LOL my question is what range … i could just wait and do it at 50 because i’m gonna have a fast fire red dot f…Read more

]]> 49a0f5cc654a168f78a2ab671230b31e ironarmknives replied to the topic nightforce on vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/nightforce-on-vulcan/#post-244703 Sun, 31 Jan 2016 13:19:42 -0400 quote kris:ironarmknives move it a bit backward, on the rail. 😀
off you go

I had to adjust the rail, my barrel was shooting way too much to the right and the scope was looking left. a miniature cross/side adjustement on the front of the rail got it sorted.
instead of overadjusting/messing with the turrets. while maintaining optical axis on the…Read more

]]> 21ba4f2869e4854e6ac9f64429687559 ironarmknives replied to the topic nightforce on vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/nightforce-on-vulcan/#post-244702 Sun, 31 Jan 2016 13:12:02 -0400 quote dman1114:Where do u live?? Im still waiting on my SWFA scope…..

Congrats on mount….. looks like a good one
san diego ça.

]]> b5981dbf190274d3016ebe01bd8eca2b ironarmknives replied to the topic scope ring mounts best for vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/scope-ring-mounts-best-for-vulcan/#post-244576 Fri, 29 Jan 2016 21:09:50 -0400 Got the Leopoldo rings also a 45 deg. mount for my fastfire lll gonna use that for 5-30-40 yards scope for 50-150 yards I ll send pics when I get it all

]]> c79052c8109a3676f37f5d4dea3a7c32 ironarmknives replied to the topic vulcan .25 scope aeon 10-40x56 ? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-scope-aeon-10-40x56/page/2/#post-244429 Wed, 27 Jan 2016 15:58:27 -0400 Ordered the 16x swfa today I was torn between the 12 or the 16 hope I did good
The doves I want land about fro 70-130 yards away and I want to see pellet hits on targets at 100 yards so went with 16x
Now what mounts too get ? I would assume medium height but mount cost are all over the place lol

]]> 7a0d7919a31b6efa348af84a1f892ea0 ironarmknives replied to the topic vulcan .25 scope aeon 10-40x56 ? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-scope-aeon-10-40x56/page/2/#post-244385 Tue, 26 Jan 2016 22:49:35 -0400 quote Cricket:quote ironarmknives:So keyser will I be able to focus at 15 – 20 yards with a swfa 16x
The parallax is 10m to infinity
http://swfa.com/SWFA-SS-16×42-Tactical-Riflescope-P53715.aspx
I just read a post that said that I think I ll get the 16x SWFA tonight

]]> 1d6724a5e27ad966fcec9996e9c5ebca ironarmknives replied to the topic vulcan .25 scope aeon 10-40x56 ? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-scope-aeon-10-40x56/#post-244372 Tue, 26 Jan 2016 19:33:57 -0400 So keyser will I be able to focus at 15 – 20 yards with a swfa 16x

]]> 744d2d8ce9976179bec3eed9facdb834 ironarmknives replied to the topic vulcan .25 scope aeon 10-40x56 ? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-scope-aeon-10-40x56/#post-244353 Tue, 26 Jan 2016 13:29:08 -0400 I think I could get 500.00 ish never 1000.00 for a scope are falcon men any good .
And is ffp over rated I’m just having a hard time getting my head wrapped around a fixed scope it seems to limit me I know all my army brothers say fixed but that’s not a pellet gun shooting from 10-150 yards this shit is harder picking than picking the gun lol lol…Read more

]]> 5205b58c60a26ceec4c336f61ac3cd9e ironarmknives replied to the topic vulcan .25 scope aeon 10-40x56 ? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-scope-aeon-10-40x56/#post-244345 Tue, 26 Jan 2016 12:00:43 -0400 u make great points 16x SWFA SS is what i’m leaning at so if i’m making a 20-30yrd shot am i gonna be able to adjust focus “rear focus is same as side focus”yes? i see that the 10x also has a side focus on them but not offered in 16x any reason for that or is the rear able to focus to 10yrd also
and i saw video of u shooting shotgun shells i…Read more

]]> 101b8a3846fb33fd99fbecf0f87ef3d0 ironarmknives replied to the topic vulcan .25 scope aeon 10-40x56 ? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-scope-aeon-10-40x56/#post-244319 Tue, 26 Jan 2016 04:49:39 -0400 i now its china but midways BSA 4-14 FFP tactical mil-mil might be the one i get but i do like the 16x SWFA this is harder than picking the pcp i wanted LOL

]]> 8e0a68f363e09e716cd73feee43e4fc3 ironarmknives replied to the topic vulcan .25 scope aeon 10-40x56 ? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-scope-aeon-10-40x56/#post-244311 Tue, 26 Jan 2016 02:31:51 -0400 ok your right the 16x swfa looks nice dam if i only had money the ffp 5-20 swfa looks nicer ,

]]> d96cf2f45e5eda1ff2189f9925a612c7 ironarmknives replied to the topic Vulcan .25 first blood in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-first-blood/#post-244206 Mon, 25 Jan 2016 02:11:56 -0400 its a leo 4x and the mounts where what was on it …. i’ve never been a scope man shot all my life with iron sights so don’t have any this one i had on a old rifle some one gave me …. i’m looking for the scope i want as soon as i figure out what i want …

]]> 0e00e59a595b2636de01bad7ee596d06 ironarmknives replied to the topic vulcan .25 Boringly accurate in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-boringly-accurate/#post-243924 Thu, 21 Jan 2016 12:15:12 -0400 so far i love this gun “boringly accurate” is a good thing it hit even the smallest of targets ,when i took the gun to the field i thought i’d have a hard time at 100yrds and thought i’d have to re-site it in because i sited it in at 20yrds at home but at 50yrd it was doing just fine…. my scope sucks 4x leo but it was dead on …. so now i need a s…Read more

]]> 90ea3a5c0c3500836edea7f0d11a33fc ironarmknives replied to the topic vulcan .25 Boringly accurate in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-boringly-accurate/#post-243707 Mon, 18 Jan 2016 16:48:07 -0400 ya i read that tried to shoot a #350 can of diabolo’s threw it before i got a new scope so as i can site it in with out all the adjustments of break in… i think i have about 50 more left so its scope time…

]]>