Right side, it is the natural feeing side for a lever like this (if you’re right handed)

Could be very interesting.

A few pre production models exist which are shorter than the production models and were semi auto.

MK1 production model is longer and has 8 digit serial no. it also has the semi auto internals in the shroud but they are not operational/connected and has an adjustable indexing arm. Available in silver (and the…Read more

I checked my emails and it was this time last year I emailed all the eu dealers, a few had stock inc the one there.

8 digit serial is mk1, mk2 has 4 digit serial.

I emailed them months ago and they had a few left but they are mk1 models.

Mk1’s are not for people who just want to shoot and not maintain. They are ok if you’ve got half a brain but the indexing arm is adjustable and can come loose or be set incorrectly and a lot of people throw their toys out of the pram and call…Read more

I’m gonna ask again as it seems nobody has answered me on either thread…

Can you not use Transferwise app? Can just download it on your phone and it’s so much easier than messing with your bank.

On $100 transfer the fee is $2

No…Read more

I’m just thinking in terms of what it’s worth to ME. over 100 bucks to make my gun just a little bit better?

I’m just bouncing the “Value” around in my head.

If it was 50 bucks, it…Read more

110 USD just seems very high to me. Am I alone?

How much would you charge if you were making them??

Regards the bank transfer.. see if you can download an app for your phone called Transferwise. That’s what I used and it was…Read more

Only negative for me is the fitting of the lever arm to the slider over the barrel which is a cut down bolt. I can see it damaging the threads eventually. I see this has a torx bolt that you can lock…Read more

Weren’t they supposed to be having something to do with the VL-12?

I think I’d watch him and squirrel hunter do videos on flower arranging just to get off to sleep!!

Someone in TV or radio should get hold of them. Could see Steve on TV.

That gun will be my first Edgun and the only gun I am waiting patiently to buy.

The Matador guys can wait haha

https://youtu.be/du7HTCgfiBw

Impact mentioned around 7min mark but worth watching the entire vid about FX QC

Vulcan with side lever conversion is the best bullpup IMO. I can’t even believe how consistent the shot count is, I chrono’d it and 36 shots was something like an extreme spread of 7FPS! Most were a couple of FPS apart or same.

I have a Cricket short too

Call this one the ‘kitchen sink’ lol

How can they do that?

That is Crap with a capital C!!

Taking the thread content away and saying you were threatened makes them look very bad so I’m hoping it was more a misunderstanding along the line somewhere. Surely a large company like that wouldn’t actually threaten…Read more

At least FX stepped up and sorted it. They have a great product in theory really, just seems like they need better QC or maybe more employees (or machines)

Did you think someone was gonna load up a .30cal Impact and sniper you lol.

Mind you, you’d have been safe… lined up to take the shot at 25+yds, cut himself on the rough finish, taken the shot and the pellet would have…Read more

You didn’t put anything too drastic in the original thread in my opinion.

It would have been a good outcome to have the thread end up with the refund and help people in the future. Now…Read more

Cop out lol

Someone above mentioned the firing valve coming apart, mine did that but the gun still functioned ok. Was literally rattling about in the cylinder.

Mk2 will be on my radar too.

I do like the mk1, but as soon as I saw the cocking on the prototype mk2 that made me take notice!

It didn’t look any different but it felt smooth everywhere except for the grip areas so worked well.

But there’s also no doubting the results at EBR for the Impacts.

The thing is, I don’t get how a spiralling pellet can be accurate? Even if the pellet spirals the exact same every time you could (theoretically) zero the gun at 50yds (say) But, if you…Read more

The gun has all the adjustments on the exterior that anyone can use. It’s not as if it needs stripping down and fettling.

Learn to use the settings and tweak away!

Even if Ted put photos of exact positions of every adjuster and measured them with a vernier you wouldn’t be able to…Read more

People need to understand how much it costs in time/money/materials to make things like this.

I’d have happily paid $140 for a nice metal version!

The plastic version I have.. that’s expensive!

As long as the quality is good, the price isn’t bad.

Click on below

Circa 20 yds

Be VERY careful when doing it though. As it starts to hiss, back it off otherwise the cylinder will empty all in one go.

Not really getting the mag indicator, didn’t think you could even see that…Read more

When I emptied the gun I expected it to dump the air really…Read more

My threads aren’t even showing at all IIRC

For some reason I thought Evgeny was Czech, apologies Evgeny (if you ever read) anyway, he seemed to read Czech better than English.

https://www.youtube.com/watch?v=cPDxFp7cx_c

Might be worth noting that the first video doesn’t relate to the Vulcan firing valve. The Vulcan valve does not have…Read more

http://forum.bullpupmad.com/topic/10038520/1/#new

If there’s a build up of lead and dirt in the rifling how on earth does a soft little pellet clean that?!

I’d put a few quid on the fact they do hardly anything. Especially when I set about properly cleaning a barrel once as an experiment and it took brushes, thinners and hours…Read more

He’s a top man really. Language barrier is the biggest issue but I did a bit of google translation and wrote in Czech.

Essentially the correct setting for this is the valve pin allowed to fully open just as the spring goes solid. He sent some diagrams and even made me a video but it’s just as I…Read more

This newest incarnation doesn’t have a bleed screw on the cylinder.

I think I’m just going to set it just in there enough that the threads on the cover are fully in the threads on the valve (if that makes sense)

It didn’t have any thread lock on it.

Just annoying as the gun shot the full string with an extreme deviation over 36 shots of just 7fps! Hope it doesn’t mess things up as…Read more

Think it’s PP700SA

I have the older PP700 and it’s an awesome pistol for the money.

You still feel as soon as the mag’s empty just your hand is not working as hard for the…Read more

It’s only a success because of one person, but it does seem rather dictator lead now.

The thread that got closed about the CZ barrel was just pathetic to do IMO. The worst bit about it was the video…Read more