Talonairgun | kabukicrack | Activity https://talonairgunforum.com/members/kabukicrack/activity/ Activity feed for kabukicrack. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 9264a87dada7b7818718e889241446e4 kabukicrack replied to the topic New Custom .22 Shorty Cocking Arm... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-custom-22-shorty-cocking-arm/#post-275436 Fri, 15 Jun 2018 13:38:51 -0400 quote iride:I have learned to reach across with my left hand and cock my 22 mutant , I just lose my eye on the scope for a second ,
But then again I do this with my Veteran and Crickets also ,
Mike

Very good Mike…

I must be getting old & arthritis must be kicking in…but you must be a lot more skilled than I am…

]]> 13f66b6cacf7493d5d75a449a9061442 kabukicrack replied to the topic New Custom .22 Shorty Cocking Arm... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-custom-22-shorty-cocking-arm/#post-275435 Fri, 15 Jun 2018 13:36:46 -0400 That’ the issue right now. My buddy that made both these shorty levers dont plan on making any more levers due to the levers taking too long to hand make. Its pretty easy to create left handed levers (just flip the lever upside down and tap the hole for the aluminum tube, screw in your bolt & your done). I’ve asked him to mass produce these levers…Read more

]]> 27107be5d343a9446f98fcee895b9705 kabukicrack replied to the topic New Custom .22 Shorty Cocking Arm... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-custom-22-shorty-cocking-arm/#post-275429 Thu, 14 Jun 2018 20:50:26 -0400 I rarely to never cock the Shorty when shouldered. That position is very uncomfortable unless you have arms like a T-rex (I’m not saying you have arms like a T-rex) That’s how I cock the Shorty lever now, pulling back the lever w/ my index & middle finger & closing the lever w/ my thumb. I think I understand what you mean by machining a tube for…Read more

]]> e7b129be3d35706b7a816d2431a75cae kabukicrack replied to the topic New Custom .22 Shorty Cocking Arm... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-custom-22-shorty-cocking-arm/#post-275426 Thu, 14 Jun 2018 11:19:43 -0400 Levers 2mm away from the stock…

]]> 560e3c1666cf2308af51181b4a1237b2 kabukicrack replied to the topic New Custom .22 Shorty Cocking Arm... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-custom-22-shorty-cocking-arm/#post-275424 Thu, 14 Jun 2018 02:11:37 -0400 quote Bizill:I dig it. I wonder if it’d need to be hard anodized or not. I’m not even sure if the factory lever is hard anodized.

My buddy & I thought about anodizing the lever black but havent gotten around to it. Prob make her last a lot longer but we’ll see.

]]> a6e6ad1a55f30c2b8a4d351082edf0ef kabukicrack replied to the topic New Custom .22 Shorty Cocking Arm... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-custom-22-shorty-cocking-arm/#post-275413 Wed, 13 Jun 2018 12:49:50 -0400 Mike,

I asked my buddy if he’d wanna mass produce these lil levers to sell? He told me if he had a cnc machine he’d probably do it, but for now he will pass on selling them. He took 8 hours to create 1 lever so thats a lot of time & patience. Thanks for your comments.

I appreciate all that read the post thoroughly and not just looked @ the…Read more

]]> 183617a0308ae79d1091af2f68c13321 kabukicrack replied to the topic Thiago’s Brazilian Side-lever vs AirGun Technology Side lever… in the forum Airgun Technology https://talonairgun.com/forums/topic/thiago-s-brazilian-side-lever-vs-airgun-technology-side-lever/#post-268420 Thu, 13 Apr 2017 17:20:09 -0400 Sidelever gone to jfrazier30…

]]> efe1e1c5729d7cce778ffdb147cdd464 kabukicrack replied to the topic Thiago’s Brazilian Side-lever vs AirGun Technology Side lever… in the forum Airgun Technology https://talonairgun.com/forums/topic/thiago-s-brazilian-side-lever-vs-airgun-technology-side-lever/#post-268372 Wed, 12 Apr 2017 02:41:33 -0400 I respect your opinion, but that statement to me is not a bit over the top. In the past, Ive read on multiple airgun forums about people injuring themselves, & their friends severely from airguns being worked on. Safety should be utmost important when dealing with family, friends, & airguns.

]]> 07ffc2ab0d622e0b726e73eb8bf160f4 kabukicrack replied to the topic Finally! Got rid of ALL the "PING" Noises in the forum Airgun Technology https://talonairgun.com/forums/topic/finally-got-rid-of-all-the-quot-ping-quot-noises/#post-266497 Tue, 21 Feb 2017 13:40:21 -0400 Guykuo,

Gun sounds very quiet shooting from your hallway…excellent job Sir!

]]> db515565988a78b6c89db7edae6375d6 kabukicrack replied to the topic Taipan Mutant vs. Edgun Matador R3 in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-vs-edgun-matador-r3/page/28/#post-262849 Fri, 09 Dec 2016 01:37:27 -0400 Endo,

Your Discovery Optics scope cam adaptor looks very nice. Can you weigh the entire kit for us?

Thanks…

]]> bb8d9ca62e1aedb09937b81e3faf5227 kabukicrack replied to the topic Late to the Party... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/late-to-the-party/#post-257163 Sun, 07 Aug 2016 22:41:56 -0400 Welcome Rick,

If you like to shoot a tad bit more accurate at longer distances, I’d recommend for you to invest in a nice little bubble level if you don’t have 1…Read more

]]> 6f5031ac8745273e7251d7b775c9c6a0 kabukicrack replied to the topic What's the final weight of your Shorty setup weighing in at? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/what-s-the-final-weight-of-your-shorty-setup-weighing-in-at/#post-257118 Thu, 04 Aug 2016 22:40:49 -0400 My Shorty filled to 230 bar, 1 magazine w/ no pellets, ldc adaptor, a polycarbonate 3 slot front rail adaptor w/ 2 screws to bolt her in, & some carbon fiber stickers weighing in @ 6.2 lbs…my bare gun must be a sumo weight?…too much sake & sushi fed to the wood?…

I did get the weight of the Shorty @ 6.4 lb off the…Read more

]]> be73d39ffe287dd390ef2339adf69ca2 kabukicrack replied to the topic Michal Osyda (my Taipan Std+Short Walnut Stocks ) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/michal-osyda-my-taipan-std-short-walnut-stocks/#post-256985 Sun, 31 Jul 2016 02:39:23 -0400 Mugs,

Both look incredible, congrats…

Diameter of the Shorty stock upper grip looks a tad bit thicker than the standard grip…maybe it’s me or the pics…

Checkering looks awsome also…

Can you do us a favor & weigh each of the stocks for us?…thanks…

]]> 64be6cf8522a6b316b0a1c20747475a7 kabukicrack replied to the topic Trying To Wear This Thing Out - My Baby Mutant in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/trying-to-wear-this-thing-out-my-baby-mutant/#post-256945 Fri, 29 Jul 2016 18:37:20 -0400 Big Baller scope right there…

]]> 7d9e688781cfc2f394960b332d6f7893 kabukicrack replied to the topic Taipan strikes again..... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-strikes-again/#post-256941 Fri, 29 Jul 2016 15:37:43 -0400 2 early morning neckbreakers w/ JSB 14.3g @ 890 fps @ 25 ft #’s.

The less bird crap on my car the better.

]]> 61fadbbd226a7b83d75aa6039fbd3080 kabukicrack replied to the topic Taipan strikes again..... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-strikes-again/#post-256864 Thu, 28 Jul 2016 01:06:25 -0400 Fresh from the yard…Lil bunny foofoo never made it home…Simply Dead Accurate…

]]> 0ced54d98ca678d52b24d6f8f9c2ed21 kabukicrack replied to the topic Who lives near the Dallas Metroplex in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/who-lives-near-the-dallas-metroplex/#post-256856 Wed, 27 Jul 2016 22:55:00 -0400 Old Man Hooter,

Please come on over to my private estates, please read all my huge signs saying “private property, traspassers enter at your own risk!” And please do set off all my critter alarms so I can test my airguns. I cant wait & Ive never seen an old senile humpback sasquach carrying his big medicine bottle of “mycocksafloppin”…Read more

]]> c22ce5da13f746cec12fe186b9dd7750 kabukicrack replied to the topic Should I Be Concerned Because I Have A Short Cocking Handle? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/should-i-be-concerned-because-i-have-a-short-cocking-handle/#post-256847 Wed, 27 Jul 2016 19:48:35 -0400 hahah…halarious…haha…

]]> 2957438982e45047fc4b956750b48009 kabukicrack replied to the topic Taipan strikes again..... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-strikes-again/#post-256846 Wed, 27 Jul 2016 19:18:00 -0400 Foxback,

This lil pup is a fun awsome, awsome lil shooter, she sits in my front passenger side seat more than my wife does in my truck everyday…haha…that says a lot…haha. She’s my go to gun whenever shooting from my truck & whenever I don’t need my .25 cal. The more I shoot critters, the more I see critters “mutated” in some sort of…Read more

]]> 5c4c4a95d055b10477ce4e8e6ab808dc kabukicrack replied to the topic Taipan strikes again..... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-strikes-again/#post-256765 Tue, 26 Jul 2016 02:02:06 -0400 Peps shouldnt be scared shooting this lil gun past 45 meters/50 yards…just got done ranging my Shorty out to 130 meters…50 yard shots are dead easy. Shooting JSB 18.1g @ 810 fps @ ~25 ft #’s.

This crazy colored crow was 85 meters/92 yards out (so far my farthest kill w/ this lil gun)…

I can’t see how Keyser Soze can shoot paintballs at…Read more

]]> 56998cc20b34a6f1394e3e5864bf1af9 kabukicrack replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/page/2/#post-256682 Sat, 23 Jul 2016 22:02:31 -0400 Sloth,

What scope is a top of your Shorty?…

Shooting JSB 16g @ 830 fps w/o the ldc isn’t quiet enough for ya?…

]]> 8d9d708b4749ce00c2f2d47b4786b147 kabukicrack replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/page/2/#post-256353 Sun, 17 Jul 2016 18:09:59 -0400 Cally88,

PM/contact Dman1114 (the 2nd posting from the top on this thread). He makes high quality stuff you need for both your guns.

]]> 50a98e38b8111d8d7a167635dace4b10 kabukicrack replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/page/2/#post-256331 Sun, 17 Jul 2016 01:21:53 -0400 The scope is a SWFA 3-15×42 FFP side focus. Scope is pretty nice, but my only complaint is there’s no illumination for dawn/dusk hunts. Other than that she has very nice glass & I can see my poi @ 100 meters at 15X.

http://swfa.com/SWFA-SS-3-15×42-Tactical-Rifle-Scope-P62238.aspx

My next scope for the Shorty is prob this Sig Sauer 4-16×44 FFP (…Read more

]]> 7b73cfc593d0e3c1a67e20bcec6f34bb kabukicrack replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/page/2/#post-256321 Sat, 16 Jul 2016 19:04:23 -0400 Foxback,

You know you can download a decibel sound meter app on your Apple/Android cell phone for free. I know it’s not a professional decibal sound meter product but it can give you a ballpark test measurement for multiple guns.

I agree w/ you about the background noise while shooting the Shorty. I shoot her at home, work, basically…Read more

]]> 3cbd1dbe713cb65896d3565c996ea886 kabukicrack replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/#post-256315 Sat, 16 Jul 2016 15:26:48 -0400 Foxback,

You have powerful lil gun there shooting @ 29-30 ft lbs. What’s the estimate of your shot count on a full fill @ that power level? I’m sure the swiss cheese & modified valve stem can increase the damage on critters for sure. I’m wondering about the sound report also at that power level…please let us know…

]]> 38452859018c5d1eaf938caea9eab3c9 kabukicrack replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/#post-256294 Sat, 16 Jul 2016 03:43:48 -0400 Foxback,

Your question, “kabukicrack did you test over a for power, what kind of fps did you gain?
Maybe 10-15 fps?”

To tell you the truth, I assembled everything once I received everything, and went to test over the chrony… my Caldwell chrony told me ~810 fps +-3 for 10 shots & I was very happy…I didnt want to change anything…

Dman told…Read more

]]> bc07826787eb4fdf2ad9739b61a7069f kabukicrack replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/#post-256292 Sat, 16 Jul 2016 03:32:14 -0400 Uncle Hoot,

“What the hell is a “swiss cheeses reg spacer” and “modified valve stem”???”

The items pictured are what I received from Dman…(Dman’s regulator tester, Shorty 1 piece fill probe, my modified barrel & valve stem, & the swiss cheese regulator spacer)

Is the OEM valve stem defective??? Why swiss cheese for the spacer????

The oem…Read more

]]> 56b841436c0fec9585880130094a6afb kabukicrack replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/#post-256289 Sat, 16 Jul 2016 03:01:27 -0400 Uncle Hoot,

“How do I get Dman’s swiss cheese regulator spacer and modified valve stem installed?”

Very easy…ask/pm Dman very nicely w/ a pretty please w/ cheese…

“Do I send him a Shorty?”

I disassembled my Shorty, & sent Dman my Shorty valve stem & barrel for some extra “magic machining”…

“He does this for free doesn’t…Read more

]]> 39d86e56eca81e6ade2ad1e7da983356 kabukicrack replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/#post-256283 Sat, 16 Jul 2016 01:44:03 -0400 Well, I just shot 3 shots w/ my Shorty. Gun shooting ~810 fps w/ 18.1g JSBs ~26 foot #’s over my cell phone “Sound Meter Pro” app decibel meter on my Android cell phone. The shorty averaged about 68 decibels for 3 shots w/ no ldc/moderator. (a normal conversation is ~60 db) I do have Dmans “swiss cheese” regulator spacer, & his modified valve stem…Read more

]]> 5dd22acc4a875a059046e711847ee54e kabukicrack replied to the topic Ambidextrous Cocking, Lower Butt Plate, & Palm Rest Mods in the forum Airgun Technology https://talonairgun.com/forums/topic/ambidextrous-cocking-lower-butt-plate-amp-palm-rest-mods/#post-254190 Wed, 01 Jun 2016 11:01:57 -0400 Guykuo,

Very nice clean mod Sir. I was wondering what the white puddy/clay under your Hawke scope wheel is all about?

]]> dfd520867b3dce54349bce53e6018fe0 kabukicrack replied to the topic Pellet Probe Centering, Cocking Knob Position & Resistance Fixes in the forum Airgun Technology https://talonairgun.com/forums/topic/pellet-probe-centering-cocking-knob-position-amp-resistance-fixes/#post-253779 Wed, 25 May 2016 01:57:43 -0400 Guykuo,

Excellent findings, explanation, & post.

Many Thanks Sir…

]]> ebe274c29511725eb30af6f206665d1b kabukicrack replied to the topic Short Mutant Stock Picture From Michal/Poland in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/short-mutant-stock-picture-from-michal-poland/page/3/#post-253565 Fri, 20 May 2016 23:05:00 -0400 Amazing and beautiful…

]]> b9714828f200a7d6455c8a8fac7a9a8e kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/4/#post-253564 Fri, 20 May 2016 22:54:59 -0400 quote REARSPROCKET:Petr’s barrel sure does like those 18gr JSBs, what are the head sizes for those 18s and the 15.8s ?

Rearsprocket,

I’m not sure who the manufacturer of my 45 degree TP barrel came from according to Charlie. All Charlie mentioned was that they are limited edition no name barrels, not real CZ barrels. Maybe Chinese? Taiwanese?…Read more

]]> 088072e6f30162d19f7914954f5533f9 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/4/#post-253441 Thu, 19 May 2016 16:59:36 -0400 Temperature today: 61 degrees & slight rain (last testing temps was 80 degrees cloudy)
Yards: 30 (5 shots per 1/4″ target dot.)
Gun Set Up: Same

JSB’s & Falcons win again. I placed a 18.1g JSB pellet next to today’s winners.

The 32.4g Eunjin pellets had to be single loaded.

The 19g H&N Barracuda Hunter Extremes were a bit of a…Read more

]]> a23dd864436964817058beb9b5a36d85 kabukicrack replied to the topic Baby replacement CZ barrel in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/baby-replacement-cz-barrel/page/2/#post-253414 Thu, 19 May 2016 10:52:02 -0400 quote endothelium:Hi, Charlie:

Thanks for the explanation. This is very helpful and has clarified some of the questions.
Can you tell us what kind of barrel (the slanted TP barrel) machined by Petr? Is it a CZub or CZ Rep made barrel or something else?
Thanks again.

Regards,
Endo

Excellent question Endo…

Please do explain Charlie…

]]> 24039bf806c2220f4db7ce2726f0c0b5 kabukicrack replied to the topic Taipan Mutant vs. Edgun Matador R3 in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-vs-edgun-matador-r3/page/23/#post-253397 Thu, 19 May 2016 02:34:47 -0400 Endo,

Your barrel looks awsome & so bling. Your made over barrel makes my barrel look so old & senile. Your new fill probe is a beaut also. Dman what a great job bro. Post some damage when possible.

]]> bb556c0284300f2d18745567d8d09fd8 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/4/#post-253365 Wed, 18 May 2016 16:45:23 -0400 Dman, don’t worry, I surely will…

About the 45 degree angled transfer port compared to a 90 degree transfer port. I’m not sure if our TP’s were meant to be machined at 45 degrees. I figure air flow is more easily directed/flowing moving at 45 degrees rather than a sharp turn at 90 degrees, but I’m sure it really doesn’t matter since we’re not…Read more

]]> b972209d2ccff688c677c95a5ef76f52 kabukicrack replied to the topic O-ring sizes in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/o-ring-sizes-d32/#post-253354 Wed, 18 May 2016 15:20:08 -0400 $9.45 fast shipping for a tiny envelope of rubbers?…that’s a mugging for sure… :suprisedn:

]]> fcd51c7c3dfdff2a0f6c188851ce51e0 kabukicrack replied to the topic Baby replacement CZ barrel in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/baby-replacement-cz-barrel/#post-253340 Wed, 18 May 2016 13:12:11 -0400 Pure awsomeness Sir…Please do let us know how she blast when up & running…

]]> d1b7156ccaf4c6b0a36c7ab4e8343ee3 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/3/#post-253339 Wed, 18 May 2016 13:04:59 -0400 Dman,

I apologize if my last post was misleading. I was just trying to see if I can suggest a procedure to correct their blow back issues starting from home. Thats awsome that you already corrected Endo’s barrels issues. Im sure he will be thrilled and grateful to you. I also “thank you Dman” for you knowledge & help to everyone on this…Read more

]]> cb3a8053941721061f8e3b4a1ef74d04 kabukicrack replied to the topic Baby replacement CZ barrel in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/baby-replacement-cz-barrel/#post-253327 Wed, 18 May 2016 05:37:41 -0400 Endo & Donny,

Yalls blow back issues sound the same to me. I’m just taking a educated guess on this. If yall already changed the receiver oring out to a new one w/ no nicks/cuts, then it might be that the end of yalls barrels (where the back of the barrel slides into the receiver) might be machined a tad bit too much creating blow back causing…Read more

]]> f3159e72de34f28c2b6ef48c90200733 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/3/#post-253326 Wed, 18 May 2016 05:15:17 -0400 Endo & Donny,

Yalls blow back issues sound the same to me. I’m just taking a educated guess on this. If yall already changed the receiver oring out to a new one w/ no nicks/cuts, then it might be that the end of yalls barrels (where the back of the barrel slides into the receiver) might be machined a tad bit too much creating blow back…Read more

]]> 63bfca387cf5e56b55fddf8ac5fc5b31 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/3/#post-253320 Wed, 18 May 2016 03:20:14 -0400 Endo,

For some reason to me the surface of my muzzle seems more flat. Maybe it’s my eyes. Please correct me if Im wrong. The surface of your muzzle looks like a slightly raised bubble. I did jb bore paste & jb bore bright my barrel also. I do this to all my airgun barrels for less lead collection & it takes longer for my barrels to dirty up.…Read more

]]> 635b1e97685e75b1f14d36342ef12a78 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/3/#post-253314 Wed, 18 May 2016 02:13:13 -0400 Secoda,…I forgot to mention that my safety switch was not functioning correctly when she was shipped to me. When I received her, I tested the safety while cocked and she would fire when I pulled the safety backwards (meaning I could shoot the gun with the safety with my index finger) The problemo didn’t bother me until today (I never use the…Read more

]]> 1e75038ffd8ff0dbfca355009d749c53 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/3/#post-253308 Wed, 18 May 2016 00:24:07 -0400 Sure is choked…like a chicken…

Just ran a real fast test (b4 it started storming)…JSB 18.1g 5 shots over my Caldwell chrony…823, 824, 825, 823, 824 fps… (never had a gun do this amazing feat)…

]]> 69125d9f4ac304a6f1d1c45bd2cf78c4 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/3/#post-253306 Tue, 17 May 2016 23:17:15 -0400 Here you go good Sir…

]]> 7c68e413c94062cc18bc0b8f5f5566e4 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/3/#post-253304 Tue, 17 May 2016 22:48:47 -0400 I took some measurements…Sorry, the calipers needs a new battery also.

I carefully slid an allen wrench snug into the TP hole. I’m not sure if the transfer port is suppose to be at a 45 degree angle? The set screw dimple is 180 degrees on the other side.

]]> 9c5d88f4cef126ff5def78dc6961f2ce kabukicrack replied to the topic Baby replacement CZ barrel in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/baby-replacement-cz-barrel/#post-253302 Tue, 17 May 2016 22:09:29 -0400 With the understanding that my Shorty didnt have a replacement barrel. There’s a 1-2mm gap on my pistola also. I can stick my index finger nail in the gap and feel the “step down” part of the barrel and the receiver. Info from the experts above sounds best.

]]> fd34bc691a47195f673e7cd5dc8e70d7 kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/2/#post-253259 Tue, 17 May 2016 02:48:01 -0400 Keyser Soze,…haha…Oh yea, that Asian Airgun Triad your speaking of. I know of the crew. I’ve been initiated a while back already. I’ve been lurking in the background doing all the dirty work, pulling the trigger that no 1 else wants to accomplish…hahah…& I’m prob the more outspoken one of them.

]]> ef1c16d12269eb67d27e67177188cfce kabukicrack replied to the topic .22 Mutant Shorty...(Graphic...) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/22-mutant-shorty-graphic/page/2/#post-253256 Tue, 17 May 2016 01:33:57 -0400 Secoda,…It’s ok, theres too much free open land down here to find and to utilize. I’ve already ask my wife to move to the country so the kids can have more land to play? (so I can have more land to shoot/pest) Her response was “do you see any Asian peps living in “Green Acres?”” My response “I can start a bunch of rice patty fields for…Read more

]]>