Talonairgun | kekoa | Activity https://talonairgunforum.com/members/kekoa/activity/ Activity feed for kekoa. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 0a9c05d44826a68ea307306aff8439ff kekoa replied to the topic LESHIY 2 For Sale in the forum General Airguns For Sale https://talonairgun.com/forums/topic/leshiy-2-for-sale/#post-537505 Wed, 08 Feb 2023 13:50:51 -0400 Hi. Yes it is still available for sale if you are interested.

]]> d5d5c48cf9a6c22e6c0d85569668d171 kekoa started the topic LESHIY 2 For Sale in the forum General Airguns For Sale https://talonairgun.com/forums/topic/leshiy-2-for-sale/ Fri, 02 Dec 2022 22:27:00 -0400 Hi, Yes it has been awhile. I have my Leshiy 2 350mm with all components when bought new plus an installed DonnyFL Ronin Moderator. Again I have all stock components plus original boxing when shipped to me. Asking 2100$ plus shipping to your location.I have shipped my matador to edgun west from my state for repair for 30$ if the helps with…Read more

]]> e57ad0eec93874f7b7be4da70c1cb5a0 kekoa replied to the topic Is this Edgun an R3 that the multi shot kit fits? in the forum EdGun https://talonairgun.com/forums/topic/is-this-edgun-an-r3-that-the-multi-shot-kit-fits/#post-206949 Mon, 21 Jul 2014 19:22:36 -0400 quote Urgirlinmyjetta:You are correct…the multishot will fit any edgun that has the barrel shrouded….r3 and above….tony had mentioned that in another thread.
quote zeeafus:Thank you ser. I thought I had seen that post before. Finding it with my computer skills is another question. 🙂

+1 to Urgirlinmyjetta and I have one for sale in the for…Read more

]]> ad15532a1c75298270fa9e4f64c9c391 kekoa replied to the topic Got my Multi-Shot Kit in the forum EdGun https://talonairgun.com/forums/topic/got-my-multi-shot-kit/page/2/#post-206123 Thu, 10 Jul 2014 00:18:02 -0400 quote acourvil:O.k., just got my multishot kit. Replacement of the breach/bolt looks very simple, just take one off and replace with the other. I’m not sure about the barrel block; do you have to disassemble everything up front and take the barrel off to screw it into the barrel block, or is there a simpler way?

What I did was remove the baffle…Read more

]]> 09fc372dd84fd1ce9e514b58587e1d64 kekoa replied to the topic Got my Multi-Shot Kit in the forum EdGun https://talonairgun.com/forums/topic/got-my-multi-shot-kit/page/2/#post-206096 Wed, 09 Jul 2014 15:34:55 -0400 quote Ed:quote Urgirlinmyjetta:dammit i need a new rear screw than….i stripped the head of the screw trying to get it out…..these damn screws are soo soft its ridiculous

Why? If you don’t need to replace 0-ring inside the reservoir you don’t need to take off that plug from the back side of the reservoir.

So Ed, to remove the breech there is…Read more

]]> 9b6609faa1d6196b9852ca761fa4a3e4 kekoa replied to the topic Conquering the Beast! in the forum EdGun https://talonairgun.com/forums/topic/conquering-the-beast/page/2/#post-206095 Wed, 09 Jul 2014 15:25:07 -0400 Pretty darn quiet there Donny. I may have missed this in previous post, how much length will it add to the .25 Matador?

]]> a406f4637f6cf01989bb3b280529a1bd kekoa replied to the topic Got my Multi-Shot Kit in the forum EdGun https://talonairgun.com/forums/topic/got-my-multi-shot-kit/#post-205924 Sun, 06 Jul 2014 14:45:52 -0400 quote Ed:quote Kekoa:I must apologize guys. I was just getting set up to video the take down and re-installationg of my multi-shot kit for all of you and I seem to have stripped one of the screws on the end cap of the air tube 🙁 For obvious reasons I will not be able to get video up any time to soon. Any one out there know where to get…Read more

]]> 8c5ec979f2d30221046c63a55c158422 kekoa replied to the topic Got my Multi-Shot Kit in the forum EdGun https://talonairgun.com/forums/topic/got-my-multi-shot-kit/#post-205885 Sat, 05 Jul 2014 18:57:16 -0400 I must apologize guys. I was just getting set up to video the take down and re-installationg of my multi-shot kit for all of you and I seem to have stripped one of the screws on the end cap of the air tube 🙁 For obvious reasons I will not be able to get video up any time to soon. Any one out there know where to get replacements of the stews and…Read more

]]> 0869d6d0a8410bb821af348cc5d44e9c kekoa replied to the topic Conquering the Beast! in the forum EdGun https://talonairgun.com/forums/topic/conquering-the-beast/page/2/#post-205838 Sat, 05 Jul 2014 02:59:24 -0400 quote ambos:It’s nice to hear what you did to shut the Beast up, Donny.
So when will you put your solution on market ? I’m eager to put it on my Beast 😆

One more time. This sounds interesting Donny, you going into production?

]]> f89c51ae9f18fee3a28cf514c281229a kekoa replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/page/2/#post-205831 Sat, 05 Jul 2014 02:02:47 -0400 quote Strietwise:I agree. If you want a $500 nock off then you should buy it. I would not. There are few things that I can appreciate the very best of. Not cars, not alcohol, not watches. But I sure can appreciate the quality of my Matadors.

Strietwise get’s it. Well said :8:

]]> d1c34fa73a10ecef0df88ff540bbfcff kekoa replied to the topic Got my Multi-Shot Kit in the forum EdGun https://talonairgun.com/forums/topic/got-my-multi-shot-kit/#post-205818 Sat, 05 Jul 2014 00:48:20 -0400 quote Hemn:Congrats…. yep… some pics and vid is interesting. ..

If you have enough info…you don’t need to remove/ empty the air.. anyhow it was good you did. ..

My shipment should be arrived during next 5 or 7 days…. but I will get the single shot breech. ..

I just removed the actual air reservoir not the air. Just wanted enough…Read more

]]> 716c0ba8fba5ab3f7397712ed6e0587b kekoa replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/page/2/#post-205817 Sat, 05 Jul 2014 00:43:44 -0400 quote tbear:I’m confused. Are you guys worry about the cloning or the made in China? I seem to recall a lot of people being happy with the P-12. Aren’t they made in China? Oh yes they are! And it got good reviews. So that theory goes out the window. I don’t care where the fuck things are made. If it’s a good deal I’m buying it. I won’t be the…Read more

]]> 9bd01e09027c7adad795d07c833d1ab5 kekoa replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/page/2/#post-205816 Sat, 05 Jul 2014 00:42:28 -0400 quote Wanta edgun:quote Kekoa:quote tbear:Make you think though. If the Chinese can make this for $500, why does Ed charges $2000+ ?

If you want quality sometimes it costs a little more. Supply and demand sometimes causes increase in price. If you think about it Ed’s price has stayed pretty stable for at least the last few years or so. This is a…Read more

]]> 18af3295441044b308cd80abef195956 kekoa replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/page/2/#post-205801 Fri, 04 Jul 2014 21:48:37 -0400 quote tbear:Make you think though. If the Chinese can make this for $500, why does Ed charges $2000+ ?

If you want quality sometimes it costs a little more. Supply and demand sometimes causes increase in price. If you think about it Ed’s price has stayed pretty stable for at least the last few years or so. This is a free market purchase as you…Read more

]]> c027d0766067093243ba9e6d16649beb kekoa replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/#post-205794 Fri, 04 Jul 2014 21:20:15 -0400 quote The Cad:We all know you can get a “Rolex” for $20, it may look the part but you all know it’s going to break.

So you can get an “Edgun” for $500……

Personally, I would not want 200 Bar next to my face knowing it’s going to break – It would be like juggling a grenade with the pin pulled, not IF, but WHEN. 😯

Just saying, that’s…Read more

]]> 122525cc79c739a2f989281f5f14cc28 kekoa replied to the topic Quieting the Matador even more in the forum EdGun https://talonairgun.com/forums/topic/quieting-the-matador-even-more/#post-205783 Fri, 04 Jul 2014 19:01:32 -0400 quote The Cad:quote Kekoa:Awhile back there was a thread about a mod to quiet the report of a matador. You had to remove the barrel shroud and drill some holes into the shroud. I think you could put some holes into the barrel nut also to help make things even quieter. Does anybody have the link to that thread by any chance. I want to remove my…Read more

]]> 1bc112389190a33ed9bb09654773e3d2 kekoa replied to the topic LDC Can and 1/2" x 20 Edgun update. <••>!! in the forum EdGun https://talonairgun.com/forums/topic/ldc-can-and-1-2-quot-x-20-edgun-update-lt-gt/#post-205750 Fri, 04 Jul 2014 03:44:12 -0400 Cool to hear. Are you planning on a run of them to sell? I am looking forward to seeing what you come up with. :whistle:

]]> 72c605348a29d13a00fcbdd7a37b4308 kekoa replied to the topic ED, R3 multishot kits, Yes OR No? in the forum EdGun https://talonairgun.com/forums/topic/ed-r3-multishot-kits-yes-or-no/page/2/#post-205368 Wed, 25 Jun 2014 23:55:55 -0400 quote ohiochuck:Kekoa,
How long have you been on the waiting list for the R3 Multi Shot Kit? What is the cost?
Thanks!
Jim

It’s been so long I am not sure :rofl: Seriously though I think slightly more than a year or so more or less. As soon as Ed announced they would be released soon (through Tony) I got not the list for one for my .25…Read more

]]> 326bb07d3330e0f1bf5198c753061ad8 kekoa replied to the topic ED, R3 multishot kits, Yes OR No? in the forum EdGun https://talonairgun.com/forums/topic/ed-r3-multishot-kits-yes-or-no/page/2/#post-205363 Wed, 25 Jun 2014 22:46:41 -0400 Whats up guys! It’s been awhile that I have been on the talon hope all are well. I just got an email from tony that my number came up for the multishot kit. Just wondering if anybody has received one yet and what they think of it. Alright guys thanks.

]]> f37f3e1085e8b80af0530c9e7fd4ce16 kekoa replied to the topic I need a barrel in the forum EdGun https://talonairgun.com/forums/topic/i-need-a-barrel/page/2/#post-181506 Fri, 18 Oct 2013 20:37:00 -0400 How do you post photos. I have some and I just cannot figure it out.

Thanks!

]]> 1794a1688b9430c324c95f8d2e244e7b kekoa replied to the topic I need a barrel in the forum EdGun https://talonairgun.com/forums/topic/i-need-a-barrel/page/2/#post-181504 Fri, 18 Oct 2013 20:12:16 -0400 quote Wingman NZ:There will be nothing wrong with your barrel.. a soft lead pellet cant damage the hard steel of your barrel.. you will find your problem is a build up of lead on the forward side of the transfer port.. you may have a small sharp bur of steel from the drilling process on the transfer port collecting a skim of lead a the pellet…Read more

]]> e342afb43d1222e30248a64e8d972588 kekoa replied to the topic I need a barrel in the forum EdGun https://talonairgun.com/forums/topic/i-need-a-barrel/page/2/#post-181502 Fri, 18 Oct 2013 19:41:03 -0400 Update: I cleared the pellet(s) jammed in the barrel. I filled to about 145 bar to be safe and tested fired. It shot as normal. I filled to 220bar and now I get very little FPS. I have no chrony so I cant tell you a number for sure but when I shot at a 2×4 it bounces off.

]]> bda9d6ba7e86a497bb2ac6d39cb576a3 kekoa replied to the topic Matador Degas Tool (Make Your Own) in the forum EdGun https://talonairgun.com/forums/topic/matador-degas-tool-make-your-own/page/2/#post-181500 Fri, 18 Oct 2013 18:31:29 -0400 quote Strietwise:I have never liked the process of degassing my Matador. So recently I made my own Matador Degas Tool. It works like a charm and cost less than $8.00. I thought others might be interested in making their own so here is how you do it.

What You Need:
1) Order on eBay one (Brake Line Thread Adapter – Male M10 x 1, Female M12…Read more

]]> 67c992b5a9b61d131c81d39f23e6a0b2 kekoa replied to the topic I need a barrel in the forum EdGun https://talonairgun.com/forums/topic/i-need-a-barrel/page/2/#post-181494 Fri, 18 Oct 2013 16:03:32 -0400 quote FVA:Whatever it is, sure sounds like a owner induced issue to me.
A $2000- price can’t over come that.
And Kudos to Earnest for offering a free look and fix if he can.

right on man right on your your great. sarcasm all the way pal

]]> 16a0343030969fc4d18036702b9988f0 kekoa replied to the topic I need a barrel in the forum EdGun https://talonairgun.com/forums/topic/i-need-a-barrel/page/2/#post-181486 Fri, 18 Oct 2013 14:41:57 -0400 quote sniperlabyo:If all thing unhelpful to correct your barrel loading problem, send the barrel to me and I will make it right–just pay shipping both ways !

Ernest

Thanks Ernest, I will try a few more things to see if I can clear what is plugging the barrel. If I get stuck I will PM you about how we should go about sending the barrel to…Read more

]]> f2d09b9872d1f0cdb5bc6bc559dbcaf2 kekoa replied to the topic I need a barrel in the forum EdGun https://talonairgun.com/forums/topic/i-need-a-barrel/#post-181461 Fri, 18 Oct 2013 05:10:15 -0400 quote SECoda:How many shots are on the gun?

About 2500 JSB’s. Any tips on how to clear the lead build up I see in the barrel? I have read a bore snake is not good for airgun barrels because they are to soft. I was thinking about trying to push the lead deposit from muzzle to to breech to get it out with a dowel stick or rifle cleaning rod.

Tips…Read more

]]> 943aab1aba84e9acb24d6fbbf14185ad kekoa replied to the topic I need a barrel in the forum EdGun https://talonairgun.com/forums/topic/i-need-a-barrel/#post-181459 Fri, 18 Oct 2013 04:09:39 -0400 quote Urgirlinmyjetta:There must be some pieces of led stuck in your barrel…have you tried cleaning your barrel?

I did, I ran a few patches through and they were clean. It does almost look like a hunk or mound of lead is at that spot just after the breech and where the barrel start. If I remove the breech block I can get a better view. I will…Read more

]]> f345fce9c67964054a6535e9ad71a2f5 kekoa replied to the topic I need a barrel in the forum EdGun https://talonairgun.com/forums/topic/i-need-a-barrel/#post-181456 Fri, 18 Oct 2013 02:54:55 -0400 Gotta love TAG! You guys offer good support and understand when a matador is down.

Good call on the PM to Ed, I just did that.

]]> bd91a85705db2561968662fb30be3335 kekoa replied to the topic I need a barrel in the forum EdGun https://talonairgun.com/forums/topic/i-need-a-barrel/#post-181447 Fri, 18 Oct 2013 01:47:39 -0400 I will try and get some pictures but it will be hard. The problem is past the breech and just into the barrel. I can load a pellet actuate the bolt and it jams about to where you can still just see the pin on the bolt that pushes the pellet in.

I took it apart again and cleared the pellet and tried again. this time it fires and a stray pellet is…Read more

]]> 5970b288a5cdc2ea38eb9cfde39f3590 kekoa replied to the topic edgun degas video? in the forum EdGun https://talonairgun.com/forums/topic/edgun-degas-video/#post-181440 Thu, 17 Oct 2013 23:39:45 -0400 quote donnyfl:Video from Ted: http://www.youtube.com/watch?v=kWZBxMZ7dbg

Strietwise degass tool: http://www.talonairgun.com/forum/viewtopic.php?f=22&t=27095

Thanks Donny, it was a big help. I had a pellet stuck before the port that lets the air force the pellet through the barrel (not sure of the technical terms) and it was causing a blockage. I…Read more

]]> 9a6a3fba094318f2edda68601cc58471 kekoa replied to the topic shoebox psi adjustment??? in the forum General Chat https://talonairgun.com/forums/topic/shoebox-psi-adjustment/#post-178731 Thu, 29 Aug 2013 20:17:51 -0400 quote roachcreek:One of the things I really love about the Freedom 8 is the electronic shutoff, mine shuts off at 4650 PSI each and every time.

Nice feature. I was just barely able to get approval from my purchasing department for the ‘shoebox max’ 4500psi. Namely the wife.

]]> e1834244d9f0c7bb1525925e1280b42e kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/13/#post-178271 Fri, 23 Aug 2013 22:36:03 -0400 quote Hoot:In order of quiet:

1) Clague Shroud/LDC combo, without a doubt. As quiet as you are going to get without getting ridiculous on length and diameter.

2) One piece, aluminum, slide-on shroud. For roughly an 1″ over OEM length, it is going to be tough to beat as a stand alone shroud.

3) Clague one piece carbon fiber shroud. It is…Read more

]]> f025e661fa87e53a8384ff99f33fbc1d kekoa replied to the topic UPS opened the box I sent Neil Clague? in the forum BullPup General Chat https://talonairgun.com/forums/topic/ups-opened-the-box-i-sent-neil-clague/#post-177943 Sun, 18 Aug 2013 22:40:49 -0400 quote Hoot:Pics to follow when he finishes the project.

H 😯 😯 t

Hoot my man,

I am interested in the pics after Neil gets done. Will you be posting on this thread or the other one that started this whole discussion all the way to now a modification? I think it was ‘quieting your edgun inexpensively’ or something like that. Just…Read more

]]> 5bc5589ffa49f86f78b0198f49630106 kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/10/#post-177508 Sat, 10 Aug 2013 20:34:12 -0400 quote Hoot:quote Kekoa:Just a point and question. Would or could this fall into the category of ‘silencer’ and be illegal to own? Being removable (and thus usable on another firearm) and made to suppress the report from an airgun (or thus any other gun) could put us in the area of interest by the BATF. Just saying and just checking. I would…Read more

]]> eb5002c9a4ae063aee29ef7cc68040a5 kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/10/#post-177497 Sat, 10 Aug 2013 18:31:43 -0400 lucky man sir ville, could mean some time away here

]]> bdfe9a5b7e695165e50b5cd893f35567 kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/10/#post-177484 Sat, 10 Aug 2013 16:05:25 -0400 Just a point and question. Would or could this fall into the category of ‘silencer’ and be illegal to own? Being removable (and thus usable on another firearm) and made to suppress the report from an airgun (or thus any other gun) could put us in the area of interest by the BATF. Just saying and just checking. I would certainly be interested in…Read more

]]> e11469d0b6f1b1d915bd24053bb52dd4 kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/8/#post-177359 Fri, 09 Aug 2013 05:51:03 -0400 quote Hoot:Incidentally, how about a poll of who would be interested in a full one piece replacement shroud, and who would want a modified top piece replacement moderator? This would give Neil an idea of market volume he has to work with. The more orders the less expensive than a “one off”…

Hoot my man, I would be into a “full on piece…Read more

]]> 41e1675ec7d7292a4d1c174ef680e41b kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/8/#post-177357 Fri, 09 Aug 2013 05:29:17 -0400 Just finished my .25 standard. 1.95mm jet on the barrel shroud with 5 new vent ports on the bottom. I put a scotchbrite pad at the base of the barrel shroud to muffle venting air from the jetted ports, also jetted the baffel nut to 2.3mm or so also. Amazing!! As stated in earlier comments the impact on my steel targets is louder than the gun…Read more

]]> 07610a23ed4590673bb1a4e0b5b641d8 kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/7/#post-177308 Thu, 08 Aug 2013 22:10:27 -0400 quote Hoot:Gabe… You are the closest to the answer. Is there a place where you could take the shroud cover and see if your guess is correct?

To the last post regarding. 25 standard…
Will it work on a standard? Probably. I doubt if Ed uses different shrouds on his guns.

Thanks Hoot!!

]]> 30ace7f3a7b2d68027250e524a5fa38e kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/7/#post-177305 Thu, 08 Aug 2013 21:48:49 -0400 Would this work fine for a standard R3?

]]> a01f2bca2979ed80991210bdeff00adb kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/4/#post-177136 Wed, 07 Aug 2013 04:35:51 -0400 quote meech1456:quote Kekoa:Will I lose air use efficiency with this modification?

You shouldn’t. The baffles and tube are meant to deal with the exhaust; the compressed air released from the tank via the valve transfer port. The air that is used to propel the pellet up the barrel is substantial. It is also going very fast. This is where the…Read more

]]> 69e5b18dce9e0b8da68b2824621fd486 kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/4/#post-177134 Wed, 07 Aug 2013 03:32:38 -0400 Will I lose air use efficiency with this modification?

]]> c9c8d6b92f0587d73eb1f12919b1e807 kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/3/#post-177094 Tue, 06 Aug 2013 16:12:37 -0400 quote synopsys:Nope.

I bet if you ask nicely Hoot will send you his Russian Torque Wrench. I heard he hasn’t used it since he ran out of the little blue pills. 😉 Ask him to shave it before he send it, i’ve hear the hair grows back pretty quick. :mrgreen:

I guess I opened myself for that flatulence by the way I worded my questions. They…Read more

]]> 1e4529b8d35c0a017fa88de698ed10c0 kekoa replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/3/#post-177075 Tue, 06 Aug 2013 05:24:24 -0400 OK Hoot,

Stupid questions, maybe I will be joining you with those that find this website after I am gone :6: :lol:. Anyways, do I need to degas the gun to do this modification? I never have removed the barrel baffle before (say that 10 times fast), do the vent holes in the nut go thru and thru? I guess drilling would be from the breech side of…Read more

]]> 8622d771c380abff76c4f3f383c4f5a7 kekoa replied to the topic .25 Edgun Matador R3M in stock notification in the forum EdGun https://talonairgun.com/forums/topic/25-edgun-matador-r3m-in-stock-notification/page/3/#post-175818 Thu, 18 Jul 2013 19:57:28 -0400 quote Ed:Now only multyshots are ready not KITs, they will be ready later.

Thanks for the quick reply Ed and keeping us informed. I look forward to the release of the the kit version. Hope it will be soon.

Thanks

]]> 1534701d7a0255c995dd43c74dde2ff2 kekoa replied to the topic .25 Edgun Matador R3M in stock notification in the forum EdGun https://talonairgun.com/forums/topic/25-edgun-matador-r3m-in-stock-notification/page/3/#post-175807 Thu, 18 Jul 2013 17:21:11 -0400 quote Ed:quote Urgirlinmyjetta:Hey Ed how quick would the wait be if I placed a deposit for a .25 standard R3M?
Matter of fact why is it going to take longer for the .22 multi shot kit to make it to the US when the .25 is ready for anybody willing to put a deposit on it…I would have thought the both .22 and .25 would be around the same time. And…Read more

]]> 39a683cc53c4071bc8ce19e1b7567bda kekoa replied to the topic edgun multishot in the forum EdGun https://talonairgun.com/forums/topic/edgun-multishot/page/2/#post-175579 Sun, 14 Jul 2013 18:27:37 -0400 quote Ed:quote Kekoa:Hey Ed if your out there reading talon again…one more question. Will you have a .25 caliber version available when you release the modification this fall?

Thank you sir

Sure I will.

Awesome!

]]> cc1bec2a5b8ccdfbc490dc9fdc1df0bf kekoa replied to the topic edgun multishot in the forum EdGun https://talonairgun.com/forums/topic/edgun-multishot/#post-175544 Sun, 14 Jul 2013 01:34:29 -0400 Hey Ed if your out there reading talon again…one more question. Will you have a .25 caliber version available when you release the modification this fall?

Thank you sir

]]> 34954b873fe5fa7f9061654234159844 kekoa replied to the topic edgun multishot in the forum EdGun https://talonairgun.com/forums/topic/edgun-multishot/#post-175497 Sat, 13 Jul 2013 14:30:32 -0400 quote Hemn:quote Kekoa:quote Hemn:I think, Ed, will release new R3M in August.

OK so R3M would be ‘M’ for modification or ‘M’ for a whole new edgun model. I hope it is just the breech modification. I love my R3 set as is right now a lot.

as i get info from Mr. Eduard, you can install R3M breech on R3 without any modification.

Thanks Hemn and…Read more

]]> 279ac6bcb08835ede53ab3f9023b6e3b kekoa replied to the topic edgun multishot in the forum EdGun https://talonairgun.com/forums/topic/edgun-multishot/#post-175462 Sat, 13 Jul 2013 04:29:34 -0400 quote donnyfl:The M stands for Multi shot

Yes I got that one my friend. I would like to know if anyone knows if Ed is making a modification or will this be a whole new version of the Edgun Matador.

]]>