Talonairgun | kyairgunner | Activity https://talonairgunforum.com/members/kyairgunner/activity/ Activity feed for kyairgunner. Thu, 09 Jul 2026 01:06:06 -0400 https://buddypress.org/?v= en-US 30 hourly 2 d9d663e54085d91a3bb127536002d9d3 kyairgunner replied to the topic Vulcan velocity problems. in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-velocity-problems/#post-260263 Mon, 24 Oct 2016 21:21:16 -0400 quote kris:with a mark2 you can measure the regulator just need to replace the venting grubscrew with an adaptor for a pressure gauge. make sure your gauge can take the full cylinder pressure if the regulator pressure runs away.

your hammer spring is all intact in good shape as if it was new or?
That sounds like a good idea I will probably do…Read more

]]> f35f410d8ed1f947401b0cae7c50a30c kyairgunner replied to the topic Vulcan velocity problems. in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-velocity-problems/#post-260261 Mon, 24 Oct 2016 21:08:22 -0400 Okay I just went out and chronyed it after adjusting the valve a full turn and in still getting the same results. I’m going to go ahead and adjust the rregulatr like you said kris and see if that works.

]]> ab230b3a87af857767915bd4c9b78ac5 kyairgunner replied to the topic Vulcan velocity problems. in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-velocity-problems/#post-260259 Mon, 24 Oct 2016 20:54:38 -0400 quote kris:you may have a too short hammerspring. or the regulator is set way too high or letting through all cylinder pressure. or combination of both .
you need to answer the question of what is your reg is set to.
dont rely on the gauge on the gun, only if it is the new style, original can be off, mine was showing +40-50bar.

normally i would…Read more

]]>