Someone posted he and wingman left the site. Idk for sure

But I’ll be on the lookout lfor something with better glass that won’t kill my…Read more

would love to see the tear down of that platform.

any additional details on these?

I looked at their website, but they had very little info that I could see.

interesting idea, especially for night shooting where you can’t see air bubble.

Been intrigued by that caliber for ages, but people have told me it’s a weird compromise between 177 and 22.

Lars

They shall not covet thy neighbors Lelya.

ok, ok. it moved a little here too. :biggrinn:

very nice looking Lelya there.

same quality as previous versions?

are all Edgun barrels the 1-16.1 twist? Even the Leishy with it shooting at lower velocities?

lars

quote Wingman NZ:quote lars-atx:Wingman, I know on powder burners, u have different twists for diff weights 1:7 75/76gr 1:9 for 50/45/40 gr (for example). Is there a guideline rule for airgun barrels and twist rate? given the diabolo pellet design with skirt if the similar rules apply.

reading…Read more

Wingman, I know on powder burners, u have different twists for diff weights 1:7 75/76gr 1:9 for 50/45/40 gr (for example). Is there a guidline rule for airgun barrels and twist rate? given the diablo pellet design…Read more

take care.

what is the impact to shot count at this higher velocity?

Brian, did u get my email sent a couple weeks ago? Not urgent so didn’t follow up sooner, figured summer vacations going on.

Lars

I used metric-conversions.org in the volume section

I’ll hold out until one is available in matte black or matte silver like the cocking handle.

Built a rail gun in college for senior project. Propel a steel bb at greater than 5 m/s. I think we used 10-12 coke can sized capacitors.

There are some YouTube guys that built one, they have it on a wagon w a lot of electrify storage.

Got my Ali tank and Best fittings. Just realized I can’t see tank and fill pressure.

Cricket, did you add any teflon tape to threads or just tighten everything hand tight?

Looks like you permanently cut off the shroud area, are you using regular threaded barrels in the Leshiy? I like being able to add on additional noise devices if needed, especially if you are powering up a .30 for hunting.

The 2 screws go just underneath the barrel about an inch before the end of barrel for the 250mm version. Without taking one fully apart, I would think it is a C-clamp pipe hanger type of…Read more

It is an expensive pellet for sure.

-L

I’d be interested in your experience in .20 in the Leshiy compared to other calibers.

I assume all DOT tanks are UNF.

I was going to go Ninja PB tank w their PCP reg, but they limit to 3k output.

thanks
-L

I looked at their site, and may order a sample to test.

thanks
-L

I think it more likely a poorly translated marketing description.

Elmer, on the Benjamin, the triangular shroud is needed for the plasma flow to build up before releasing the energy into the Borg.

I was about to pull the trigger on a Ninja tank, but then realized some of their valve are lower pressure, and I’d have to get a special one from them.

You and Wingman are determined to get me in trouble with the wife with all these great posts on the Leshiy. :biggrinn:

Guess it’s small enough to hide, just need to get her out of the house for delivery.

-lars

I was going to mention Nitrogen tanks, but didn’t know how comfortable you are w gases. There are a couple guys on here or yellow that have the big 6k PSI nitrogen largewelding tanks delivered once a year and shoot a bunch. you will need a 6k to 3k reg setup and I have no experience with these which is why I…Read more

This is an addicting sport that is filled w/ alot of great guys. as far as your questions, a lot of them are personal preference.

1 Rifle – depending on stalking/hunting vs bench shooting. I found personally that bullpups, lightweight rifles are the ones i grab and shoot more often. I can second the Mutant comment above, great…Read more

Just glad to see so much variety in this space.

-L