Talonairgun | ldp | Activity https://talonairgunforum.com/members/ldp/activity/ Activity feed for ldp. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 287849adcbfdf7fdf9037a1913ecaf52 ldp replied to the topic So, what's my options here.. in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/so-what-s-my-options-here/#post-240844 Tue, 08 Dec 2015 12:26:34 -0400 quote 45Bravo:It was originally sold as a 24 inch 22,
It didn’t come with the bottle.

I thought about using my bottle from My talon .22 from r&l

I have not moved the hammer weight yet.
I am interested in the low power plinking out to 50 with the .177 and high shot count.

I don’t mind replacing the main spring if necessary to get the shot…Read more

]]> a035eb7fdb07265eb7b3586809c03ac0 ldp replied to the topic Changing caliber in the forum Talon/Talon SS https://talonairgun.com/forums/topic/changing-caliber/#post-232010 Wed, 22 Jul 2015 04:04:49 -0400 quote :Hi,

I just assumed that a .25 would benefit from a hi-flo valve. I would not upgrade to .25 just to get in the same fpe range of the .22.
Get the .25 and the hi-flow or direct-flo tank and you can fully enjoy the .25 capability.

my 2c.

You are correct the .25 will be at its best if you are after its full potential for power with the high…Read more

]]> 00f6c53b0589fa165e178e3327a536df ldp replied to the topic Changing caliber in the forum Talon/Talon SS https://talonairgun.com/forums/topic/changing-caliber/#post-231663 Fri, 17 Jul 2015 04:36:12 -0400 quote cdegrassi:quote Chrisyboy:Get the 25 cal while your at it – “once you’ve heard the thwack you wont go back”.

If you get the .25 you will need the additional hammer weight or replace the hammer with a heavier one

You dont have to add weight with the .25 if you are using the the standard flow tank that comes on the talon models. The high…Read more

]]> b897ffd616c031892573237f766c8a19 ldp replied to the topic talon ss .22 tune help in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-22-tune-help/#post-231230 Sat, 11 Jul 2015 03:49:03 -0400 quote Olschool:quote ldp:quote WalkonKing:Do yourself a favor and get a quick change top hat from talon tunes. You can put in the small insert and choke down that speed
I thought there was only a quick change top hat for the high flow valve?

The quick change top hat will not fit the Talon tank and valve. If you change the valve to the Condor…Read more

]]> af76341d4bd40091de8e79b131bc5483 ldp replied to the topic 12" barrel in the forum Talon/Talon SS https://talonairgun.com/forums/topic/12-quot-barrel/#post-231228 Sat, 11 Jul 2015 03:41:48 -0400 With a 12″ barrel and the standard tank that comes on the talon you can get the power down to about 13 or 14 fpe. I dont remember how fast it will go but I doubt the 12″ with the standard flow tank will go supersonic. I know I never had mine go supersonic with that setup using lead pellets but I didnt go below 8.4 grains and mostly used 10 gr.…Read more

]]> a969277af420b558557797c00c3ed0a8 ldp replied to the topic Changing caliber in the forum Talon/Talon SS https://talonairgun.com/forums/topic/changing-caliber/#post-231227 Sat, 11 Jul 2015 03:36:27 -0400 You can change to any caliber with a talon using the one tank cause the talon does not have different valves for the .177. The high flow valve is the only one that has a different setup for .177.

]]> 445ec4d55aa695a3737bdc95c5dffee8 ldp replied to the topic Reduce air waste in pump hose ? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/reduce-air-waste-in-pump-hose/#post-228146 Sun, 07 Jun 2015 19:40:04 -0400 Use a micro bore hose.

]]> 981967d3367a782c857fdac694b0656c ldp replied to the topic Qusetions On Older Talon SS Maint. & Upgrade in the forum Talon/Talon SS https://talonairgun.com/forums/topic/qusetions-on-older-talon-ss-maint-amp-upgrade/#post-227566 Sat, 30 May 2015 02:06:02 -0400 quote Airgun Bill:Thanks ldp for the reply and information. I did not know that the Spin-loc retrofit was a user install item. I know one thing, I email AF about this subject and other questions and have not had an reply. I can’t find the Spin-Loc retro kit on their website. I will try them on the phone. Oh I just remember is there not a set screw…Read more

]]> 9b7ab0e2497f494926d6ac016234ec30 ldp replied to the topic Qusetions On Older Talon SS Maint. & Upgrade in the forum Talon/Talon SS https://talonairgun.com/forums/topic/qusetions-on-older-talon-ss-maint-amp-upgrade/#post-227512 Fri, 29 May 2015 02:35:12 -0400 Dont pay for AF to switch it to spin lock ready. Just buy the parts and put them in its a simple job and takes a couple minutes. I think the cost for the parts from AF is $15. After you get it done it will work with the quick change tank and the spin loc.

]]> f96ed7c259c8bb81eccc8f83a81d9873 ldp replied to the topic 12 fpe fun in the forum BullPup General Chat https://talonairgun.com/forums/topic/12-fpe-fun/#post-225758 Sat, 02 May 2015 23:46:35 -0400 I have a BSA S10 thats shooting 10.4 fpe with AA fields and I love that rifle. Quiet and still hits birds with plenty of authority. I have killed Colombian ground squirrels out to 36 yds with a perfect head shot with ease and they have solid heads compared to birds so that tells you how far you can take squishy targets out to.

]]> 266bedc9944b90cf264f2514d7def382 ldp replied to the topic Setup ideas for a long-term survival scenario in the forum General Chat https://talonairgun.com/forums/topic/setup-ideas-for-a-long-term-survival-scenario/#post-224624 Fri, 17 Apr 2015 00:33:22 -0400 quote El_Cid:Could you give me some names for top of the line springers.
I’m located in Europe, but I wouldn’t mind ordering from US either.

Thanks!
You live in Europe and you are on an American forum asking for the names of top of the line springers? And you wouldnt mind ordering from the US. Seems kinda funny.

]]> 17787d0e901abae8fb1bc0e6b669e3ae ldp replied to the topic Barrel length in the forum BullPup General Chat https://talonairgun.com/forums/topic/barrel-length/#post-223586 Sat, 04 Apr 2015 18:57:18 -0400 quote Pippo:IMHO the fact that longer barrels are “mistakenly” considered to be more accurate comes from the days when people was shooting with open sights because certainly a longer “sight line” will give more accuracy.

:2cents:
You may be correct Pippo. Its really hard to say why people believe barrel length is what determines accuracy but…Read more

]]> c551a0860476f0117c3b889e8044992c ldp replied to the topic Barrel length in the forum BullPup General Chat https://talonairgun.com/forums/topic/barrel-length/#post-223002 Sun, 29 Mar 2015 16:07:30 -0400 Barrel length has nothing to do with accuracy. The quality of the barrel is the deciding factor.

]]> 064fedbe0b3c4bb3c2e48d55a9a628a3 ldp replied to the topic talon ss .22 tune help in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-22-tune-help/#post-221757 Sat, 14 Mar 2015 05:19:51 -0400 quote WalkonKing:Do yourself a favor and get a quick change top hat from talon tunes. You can put in the small insert and choke down that speed
I thought there was only a quick change top hat for the high flow valve?

]]> 1b910fc4e4a12498f0187beae0d7388a ldp replied to the topic talon ss .22 tune help in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-22-tune-help/#post-221749 Sat, 14 Mar 2015 03:48:56 -0400 I doubt you have a micro meter tank. The tank for the talon and SS model has a smaller port in the top hat because they do not put the high flow on that model. In my opinion the only way you will get that many usable shots will be to put a regulator on it.

]]> cb61f556939fd44a17525325591fb0d8 ldp replied to the topic Condor .22 groups opening up?? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-22-groups-opening-up/#post-221748 Sat, 14 Mar 2015 03:45:59 -0400 quote Salticon:quote GeneT:You can’t rotate the shroud on the C-SS – it’s integral. Before doing anything else I’d just go over the gun and make sure everything is still tight – barrel, endcap, trigger guard screws, scope, scope rings, base. At 50 rounds, on something that was working, it sounds to me like something is just loosening up.

If…Read more

]]> fe413f816354166ed7ea6f3679adc1cf ldp replied to the topic What Happened??? in the forum BullPup General Chat https://talonairgun.com/forums/topic/what-happened-d23/page/2/#post-221316 Mon, 09 Mar 2015 02:44:44 -0400 quote Nomadic Pirate:quote ldp:I cant even get on Teds forum. Every time I try the link on his FB page I get an error saying it cant connect. Oh wait maybe my BS filter is set to high lol. I like Ted and his videos but if he is going to let himself be in the pocket of a manufacturer I dont care to watch anymore. You cant trust paid advertisement…Read more

]]> 79e2a398ad5aedcef372a706fb5db7ee ldp replied to the topic What Happened??? in the forum BullPup General Chat https://talonairgun.com/forums/topic/what-happened-d23/page/2/#post-221304 Mon, 09 Mar 2015 00:30:08 -0400 I cant even get on Teds forum. Every time I try the link on his FB page I get an error saying it cant connect. Oh wait maybe my BS filter is set to high lol. I like Ted and his videos but if he is going to let himself be in the pocket of a manufacturer I dont care to watch anymore. You cant trust paid advertisement and reviews. I only follow…Read more

]]> 6f91f339714d0d3078d843fd574876cd ldp replied to the topic What Happened??? in the forum BullPup General Chat https://talonairgun.com/forums/topic/what-happened-d23/page/2/#post-221285 Sun, 08 Mar 2015 22:12:29 -0400 quote Beermaker:Now Steve posted a scolding for those who post videos of the dealers and mfgs. he does not like. In my opinion, he all BUT called out Ted and Jim Chapman by name.

I think it’s a damn shame that Ted and Jim no longer post on the Yellow. Now it looks like Jim is getting paid to post on Ted’s forum every few minutes.
I would say…Read more

]]> 5d25f4ca14bdf942a3c9fe9896fe9161 ldp replied to the topic Help on barrel in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/help-on-barrel/#post-220472 Sat, 28 Feb 2015 05:43:33 -0400 quote Bill25:Yes … You will be able to use any length and any cal stock AF barrel in your condor SS . 😀
Not quite. The condor has caliber specific valves. If you have a .25 condor you can use a .20 or .22 barrel. If you want to use .177 then you are suppose to get the high flow tank that is made specifically for .177. If you use a high flow…Read more

]]> b79e1cf9b095d98b74f045db96fc8fec ldp replied to the topic how accurate can one caliber be? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/how-accurate-can-one-caliber-be/#post-219013 Sun, 08 Feb 2015 22:44:46 -0400 I dont believe one caliber is more inherently accurate than the other. The only difference between them will be the size of the outside of the group but you measure the center of the group normally. A .177 with a center to center group that measures .500 will look smaller than a group from a .25 that measures .500 center to center due to the…Read more

]]> ad788ca2ac01baaca01564ae9cd0858c ldp replied to the topic Talon SS or Condor SS, which is quieter? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-or-condor-ss-which-is-quieter/#post-217120 Tue, 13 Jan 2015 03:13:03 -0400 Let me make sure I understand this correctly:

The Condor has the High-Flow valve for .22/.25 calibers. Yes
The Condor has the “low” flow valve for .177. No the .177 condor still has a high flow just a different valve spring rate than the .22/.25 valve
The Talon uses the “low” flow valve for all calibers (.177/.22/.25) Yes

Any difference in…Read more

]]> 60b1db4b4fca8a69a471901654619b93 ldp replied to the topic air fill in the forum Talon/Talon SS https://talonairgun.com/forums/topic/air-fill/#post-217071 Mon, 12 Jan 2015 04:24:12 -0400 Yes its a great option. Considering the price and getting as many fills as the big CF tanks it seems like more people would buy them.

]]> a063d1b8d65258c5eb01cbaf6ff90db4 ldp replied to the topic Talon SS or Condor SS, which is quieter? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-or-condor-ss-which-is-quieter/#post-217062 Mon, 12 Jan 2015 01:02:03 -0400 quote ON_THE_EDGE:Something to keep in mind whichever way you go is that the .177 versions use a different valve than the .22 and .25. You can easily tune the high flow valve down enough to use a .177 barrel, but you have to rebuild the standard .177 valve to get the most out of .22 and .25.

If all you are going to do is kill feral soda cans in…Read more

]]> 4e4f90e80eb055806a89e8abbd7c5e42 ldp replied to the topic air fill in the forum Talon/Talon SS https://talonairgun.com/forums/topic/air-fill/#post-217061 Mon, 12 Jan 2015 00:57:15 -0400 quote Jeff-51:Luxfer makes a scuba tank that is 106cf and 4500psi . My local dive shop sells for around 400.00 and you would need a 300 din valve. Just another option. Jeff :darth-vader: ps i believe that your paintball park could fill this set up.

That tank is actually rated at 4350 psi. I also have that tank and it works great giving me as…Read more

]]> b3fbb188f873898362ec85a757fa1774 ldp replied to the topic Talon SS or Condor SS, which is quieter? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-or-condor-ss-which-is-quieter/#post-216526 Sun, 04 Jan 2015 06:58:25 -0400 If you are talking stock unmodified then the Talon ss is quieter than the Condor SS. They both use a set of 3 baffles and the condor pushes more air so unless it is detuned the Condor SS will be louder. The .177 Talon SS on a low power tune like 14 or 15 fpe will be quieter than the .22 but not by much. I have A Talon SS in both calibers and there…Read more

]]> 848337ff6a8d305f54e7a3ca5688bb02 ldp replied to the topic Direct Flo valve with heavy .22 experience in the forum General Chat https://talonairgun.com/forums/topic/direct-flo-valve-with-heavy-22-experience/#post-216417 Fri, 02 Jan 2015 03:19:45 -0400 I dont think there is a specific top hat factory setting. typical settings you will see people use is .070 – .090 and I am sure there are some that might use a setting outside of that. I would put it about .085 and see what the velocity is and fine tune it from there.

]]> b3485a625a87e835a233ae11924de83c ldp replied to the topic Hammer wgt + Std Valve + 12" = useless in the forum Talon/Talon SS https://talonairgun.com/forums/topic/hammer-wgt-std-valve-12-quot-useless/#post-215649 Sat, 20 Dec 2014 21:29:48 -0400 I would recommend you get the high flow tank and just live with the shortened shot count and extra noise if you have to keep the 12″ barrel. The talon P tank is going to give you even less shots at full power than the high flow tank.

]]> 9df064d5c987762e688ffdfcc94d2b59 ldp replied to the topic i just installed a condor valve in in the forum Talon/Talon SS https://talonairgun.com/forums/topic/i-just-installed-a-condor-valve-in/#post-215648 Sat, 20 Dec 2014 21:26:09 -0400 quote GeneT:Is the valve fully seated? That seems like a lot of stick out unless you have the tophat dialed way out. If the tophat is screwed mostly in place, are you sure the valve is seated? Fire it a few times as-is and see if it doesn’t seat deeper.

GsT

quote :now…when top hat adjusted at its higher settings
quote :0.175″ with the TH…Read more

]]> e9996a7bc0b28b04844a8ae1423383b5 ldp replied to the topic i just installed a condor valve in in the forum Talon/Talon SS https://talonairgun.com/forums/topic/i-just-installed-a-condor-valve-in/#post-215638 Sat, 20 Dec 2014 17:45:38 -0400 Why would you want to have that much gap? Most go with something around .080 – .090 or somewhere close. You do not need a gap of .175.

]]> 530543ad0846129ef4dbee97cc309a75 ldp replied to the topic Hammer wgt + Std Valve + 12" = useless in the forum Talon/Talon SS https://talonairgun.com/forums/topic/hammer-wgt-std-valve-12-quot-useless/#post-215635 Sat, 20 Dec 2014 17:22:47 -0400 I could not get either of my Talon ss over 830 fps with a standard valve. All that happened by trying to get more was wasted air. You just do not have a long enough barrel to allow that extra air to give you more velocity. I did get real close to 900 fps with cudas when I swapped in my high flow tank. I think I was at 875 fps if memory is correct.…Read more

]]> 74486f78e97e0010cf095418200de970 ldp replied to the topic 12" vs 18" barrel in the forum Talon/Talon SS https://talonairgun.com/forums/topic/12-quot-vs-18-quot-barrel/#post-215634 Sat, 20 Dec 2014 17:09:13 -0400 quote DaveT:I know that an 18″ barrel will increase the muzzle velocity in comparison to a 12″ barrel. But is there any increase in accuracy?

No. Barrel length does not dictate accuracy only velocity. If you swap a barrel to a longer or shorter length and gain or lose accuracy it is because the barrel is better or worse than the previous one…Read more

]]> cfa62da7de2915e0c6439a0ea5e9600e ldp replied to the topic condor or talon ss? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-or-talon-ss/#post-214081 Sun, 23 Nov 2014 01:39:34 -0400 Thats very true use whats comfortable. For me the spin loc is easiest as I dont have to carry a fill adapter and I dont have to remove the tank every time I fill. :2cents:

]]> 3280a17e5e1dd347e0f1e5d102cd3162 ldp replied to the topic condor or talon ss? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-or-talon-ss/#post-214061 Sat, 22 Nov 2014 21:32:15 -0400 I guess if you cant manage to carry a very small allen key then it would make a big difference :winkn: I typically carry a couple things just in case something comes loose but I guess not everyone has the ability to add 3 ” and 2 oz of an item to carry. On the other hand if you had the collar set screw come loose on that quick detach tank model…Read more

]]> 8f56c5c72237997ad53fb9ee05ccca19 ldp replied to the topic condor or talon ss? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-or-talon-ss/#post-214056 Sat, 22 Nov 2014 20:59:40 -0400 I am not sure why people make it sound like you cannot easily remove the spin loc tank but it is actually just as easy as a so called quick detach. The only difference is you have to loosen a set screw then you literally unscrew the collar from the tank and you are done. The quick detach tank is only faster in that you can just unscrew it so I…Read more

]]> aeb1f46845ccc1a5aa75ef4650bafb54 ldp replied to the topic Baffles between bushings!! in the forum General Chat https://talonairgun.com/forums/topic/baffles-between-bushings/#post-213061 Wed, 05 Nov 2014 04:19:12 -0400 Baffles between the bushings would likely cause a decrease in performance. The reason is because the space inside the frame needs to flow air back from the muzzle with the highest volume possible. If you fill that open free space with baffles you will be reducing volume space inside the frame. The reason a silencer has baffles between the muzzle…Read more

]]> 608fd832ef84ddda04ab3a7d388fd57c ldp replied to the topic Older Talon conversion to Hi Flow tank. in the forum Talon/Talon SS https://talonairgun.com/forums/topic/older-talon-conversion-to-hi-flow-tank/#post-208261 Sat, 09 Aug 2014 05:17:23 -0400 Dont waste youre time sending them youre airgun to convert either. Just buy the collar and install it youre self. If you cannot install it then you probably should not be shooting it either 😆

]]> 9a30499edf4ecbb0f8a2959457b757ab ldp replied to the topic On the Yellow youd get banned, On TAG you get educated in the forum BullPup General Chat https://talonairgun.com/forums/topic/on-the-yellow-youd-get-banned-on-tag-you-get-educated/page/6/#post-207645 Thu, 31 Jul 2014 00:11:05 -0400 quote ironcross6921:I suppose this isn’t you either Reaper0d
http://marijuana.com/community/members/reaper0d.179578/

I would bet this is why he cannot work and has no money and why his mom still buys his toys for him. The only thing worse then this is the fact all us hard working Americans pay our inflated taxes for people like this to sit around…Read more

]]> 11785d3375b6c0c0fcce1e60a88b57a8 ldp replied to the topic Condor SS Strange behavior... in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-ss-strange-behavior/#post-207608 Wed, 30 Jul 2014 20:33:34 -0400 That depends on how you want it tuned. I have seen .070 – .090 used and probably some outside of that. My condor was .085-.087 if memory serves me correct.

]]> ce78d1a4d16b81210daa1926f789c5c7 ldp replied to the topic Condor SS Strange behavior... in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-ss-strange-behavior/#post-207594 Wed, 30 Jul 2014 18:37:30 -0400 Is the top hat tight? Is the hammer moving freely?

]]> 61261a21e5cd23dc2c0a5820aab15543 ldp replied to the topic On the Yellow youd get banned, On TAG you get educated in the forum BullPup General Chat https://talonairgun.com/forums/topic/on-the-yellow-youd-get-banned-on-tag-you-get-educated/page/2/#post-207476 Tue, 29 Jul 2014 02:19:02 -0400 quote Reaper0d:no iron no. the neighbors were the idiots that are the thieves that are next door to the shop (due to recent events are now evicted) and was dealing with that drug central. which is all one in the same

i mentioned saving my pennys to buy a cricket, at the sum of 1200 dollars you can see where that comes into the picture when i live…Read more

]]> bb932eac4865ebe47da62abc198af707 ldp replied to the topic New to the Forum and to the Condor in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/new-to-the-forum-and-to-the-condor/#post-205473 Fri, 27 Jun 2014 19:14:27 -0400 The easiest way to clean it would be to remove the tank and remove the end cap and take out the baffles. It is very easy and fast and no messing with straws. Doing it like that allows you to clean from the breach with no hassles.

]]> 577ba26627bd5d9835d9e1695216c4d8 ldp replied to the topic parallax scale not close in the forum Optics/Nightvision https://talonairgun.com/forums/topic/parallax-scale-not-close/#post-204922 Tue, 17 Jun 2014 06:00:53 -0400 That seems to be very common especially with budget optics. If it bothers you make a yardage tape that is accurate to the actual distance.

]]> 141de823a7c327eebca628c5ecdd4283 ldp replied to the topic codor ss barrel vs condor barrel for 22 in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/codor-ss-barrel-vs-condor-barrel-for-22/#post-204568 Mon, 09 Jun 2014 19:15:27 -0400 If you want low power, quiet and just to punch paper then i would pick the 24″. There a few reasons why the 24″ would better atleast IMHO. First the 24″ barrel uses less air to get the same performance as the shorter barrel. Less air equals less noise and easier to make it very quiet. The other plus to less air needed is a higher shot count. I…Read more

]]> 5a4af145bd4d0241712c4b73bb555120 ldp replied to the topic 2240 questions in the forum Other Guns https://talonairgun.com/forums/topic/2240-questions/#post-204530 Mon, 09 Jun 2014 02:33:06 -0400 I recently bought a 2240 and then traded some stuff for a 14″ barrel, steel breach, boss valve and power adjuster. I chronied it stock and with CP it was hitting 420 -425 regularly. After putting everything but the valve in i was hitting 515 – 520 regularly. For some reason the power adjuster with its new spring would not give me as much velocity…Read more

]]> 54aa4ad7f6922d232cf7a81b2e23cc9e ldp replied to the topic WEIRD question in the forum General Chat https://talonairgun.com/forums/topic/weird-question-d76/page/2/#post-204512 Sun, 08 Jun 2014 22:13:07 -0400 The tubing will suport screws for an end cap. You can either drill all the way thru and use a domed head screw or you can do like the original and tap a hole or two or even three if you would like and use a grub screw that sits into a dimple like the original end cap uses. The difference between a shroud setup and a traditional style suppressor is…Read more

]]> 7084136c534726001ecdeb0a63d889f8 ldp replied to the topic WEIRD question in the forum General Chat https://talonairgun.com/forums/topic/weird-question-d76/page/2/#post-204499 Sun, 08 Jun 2014 15:07:03 -0400 I thought the same thing. The BATF does not regulate airguns and if the ldc or whatever you want to call it is built and only intended to be used and is only used on an airgun it is legal. Now the part allot of people get scared over is intent. If the BATF decides they want to prosecute John Doe and they can prove to a court that John Doe had…Read more

]]> c960e04bf9ad5c6efb8c5cc38d7a0ba3 ldp replied to the topic WEIRD question in the forum General Chat https://talonairgun.com/forums/topic/weird-question-d76/#post-204485 Sun, 08 Jun 2014 05:10:12 -0400 If you had access to a lathe it would be much cheaper to buy stock to make baffles but unfortunately not everyone has that ability.

]]> d4f33765af5513872530aa48255dde76 ldp replied to the topic WEIRD question in the forum General Chat https://talonairgun.com/forums/topic/weird-question-d76/#post-204345 Thu, 05 Jun 2014 04:07:45 -0400 I have measured my sound loc baffles and they were just over 1″ if i remember correct they were around 1.006. That is why they slide in and out easily from the frame. You can make them fit a 1″ id by just lightly sanding the baffles so they fit correctly or you can just get the tube from online metals that measures: OD 1.125″ ID 1.009″ wall…Read more

]]> 81bf8a8fed21a1affb1611aafa1b441d ldp replied to the topic WEIRD question in the forum General Chat https://talonairgun.com/forums/topic/weird-question-d76/#post-204336 Thu, 05 Jun 2014 00:49:14 -0400 They are not bigger the reason you think it is only 1″ is because you used a ruler 😉 If you used something that measures down to .001 you would find out it really measures 1.010 – 1.016 like Dyotat has posted. I have measured 3 and they all fall in that size. Online metals has the tube that is the exact same dimension inside as the Af frame.

]]>