Talonairgun | lurker-1 | Activity https://talonairgunforum.com/members/lurker-1/activity/ Activity feed for lurker-1. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 61a61cc7b94fb5bef91c359e5fa3839f lurker-1 replied to the topic Better method for powder coating!!! in the forum General Chat https://talonairgun.com/forums/topic/better-method-for-powder-coating/#post-273423 Mon, 18 Dec 2017 17:37:32 -0400 That’s a good thought Rrdstarr.

I’ll be watching for more info on that.
So far I hear some water quench bullets for powder burners to add a point or two of BHN hardness to whatever mixture of lead, antimony, and tin they might use.
I have already used Lee Alox on my .257 air rifle bullets and resized them to a custom barrel for long range sho…Read more

]]> 75acf1a56f7a616ebc768bc653c94c60 lurker-1 replied to the topic Better method for powder coating!!! in the forum General Chat https://talonairgun.com/forums/topic/better-method-for-powder-coating/#post-273324 Thu, 14 Dec 2017 10:54:23 -0400 Maw, i’m slow at getting all the answers and take on too much at a time because I run out of gas now and then. But I will report when I can.

]]> f414cea5e469d881aed0294db2c11b1e lurker-1 replied to the topic Better method for powder coating!!! in the forum General Chat https://talonairgun.com/forums/topic/better-method-for-powder-coating/#post-273246 Mon, 11 Dec 2017 02:20:28 -0400 OH, was I bragging again?

But to get back on topic, I powder coated 30 JSB EXACT .22 at 18.3 gr +/-0.1 POWDER COATED RED. A Shake & Bake Special
Damn can’t get the image to resoze for here. I’ll send ot via emaol.

]]> 28ed32b2424396fbd2e1b1ff30f166a2 lurker-1 replied to the topic Better method for powder coating!!! in the forum General Chat https://talonairgun.com/forums/topic/better-method-for-powder-coating/#post-273229 Sun, 10 Dec 2017 18:54:14 -0400 Good idea Mike,
I’ll be watching for powder coating with some sort of luminescence.

The powder coating puts on some paint color and covers it with a polymer all in one step. It adds 0.001 for a first coat and/or 0.0015” total with a second coat and re-sizing does not effect the coating.
I have yet to get back to shooting my custom .257 Con…Read more

]]> 149e33c4294b281af7f2821718fdd13d lurker-1 replied to the topic Better method for powder coating!!! in the forum General Chat https://talonairgun.com/forums/topic/better-method-for-powder-coating/#post-273164 Thu, 07 Dec 2017 23:38:40 -0400 I’m just starting to POWDER COAT. But waiting on a .45 ACP mold so thought I’d do some of my .257s for my airgun.
Learn curve is more of jumping off a cliff.
I screwed up and baked the first few in the kitcken oven. That is a NO NO due to Toxins that can get in your food. So tonight I am setting up al old toaster oven. Eventually I’ll figur…Read more

]]> 006ad0036f69d0efd8f1890feda0a430 lurker-1 replied to the topic FUKUSHIMA MELT DOWNS CONTINUED EMERGENCY in the forum Off Topic https://talonairgun.com/forums/topic/fukushima-melt-downs-continued-emergency/page/5/#post-267292 Mon, 13 Mar 2017 19:44:41 -0400 quote Zonk:So Lurker what your saying is now with this radiation meter we’ll know when to kiss our ass goodbye…..

We may have advavce notice of when the birds will be glowing in the night. Or timely notice of what has leaked onto I-75 from all those nukewaste transports.

I already have a dysfunctional thyroid and have been cautioned to…Read more

]]> d6461bdc39a33294c47fcc215ef039ec lurker-1 replied to the topic FUKUSHIMA MELT DOWNS CONTINUED EMERGENCY in the forum Off Topic https://talonairgun.com/forums/topic/fukushima-melt-downs-continued-emergency/page/5/#post-267232 Sat, 11 Mar 2017 19:16:14 -0400 Tried to preview and lost a big post :whistle:
Her goes the short version.

F’N Shadow Gov’t. Has compromised RADION LEVEL READINGS across the USA ever since FUKUSHIMA’s UNCONTROLLABLE MELTDOWNS BEGAN. I DUMMPED THE APP I HAD BEEN WATCHING FOR SOME TIME BECAUSE THEY DO NOT WANT US TO KNOW ANYTHING ❗
The spikes in INFANT & ELDERLY DEATHS that…Read more

]]> 5ebbf17700e0f099a26bd41a8d59f04d lurker-1 replied to the topic FUKUSHIMA MELT DOWNS CONTINUED EMERGENCY in the forum Off Topic https://talonairgun.com/forums/topic/fukushima-melt-downs-continued-emergency/page/4/#post-266095 Thu, 09 Feb 2017 01:45:35 -0400 WELL, 6 YEARS LATER……. AND FUKUSHIMA IS WORSE THAN EVER !!!
…….AND THE COVER UP IN THE NEWS IS BEGINNING TO COLLAPSE !!!
…….Hell, IT KILLED A ROBOT IN LESS THAN 1 HOUR OF EXPOSURE!
I would like to propose that we kick out all illegal immigrants to make room for a few…Read more

]]> c92d2c84d6ee6aa307a06b5827dc2798 lurker-1 replied to the topic Biathlon style side lever in the forum Airgun Technology https://talonairgun.com/forums/topic/biathlon-style-side-lever/#post-260321 Wed, 26 Oct 2016 14:48:37 -0400 PICTURES…PICTURES!!! please

Link and cost would be appreciated also.

Thanks for the info. :8:

]]> 918658534324fc3832800d94f4fd9307 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/24/#post-257599 Fri, 19 Aug 2016 01:50:36 -0400 Just for comparison, with my full Doug Noble modded 257 Condor,
Same Lyman 73 gr. 257420 bullet,
Approximate same hammer setting,
BUT…
3300 PSI Tethered,
32″ TJ barrel,
Avg. 1060 FPS

I haven’t done much shooting yet and the settings above were what gave me 985 FPS Shooting 92 gr. Arsenal LFN “Noble” bullets.
I imagine 1060 is to fast for the…Read more

]]> 2e93910f55ed84446a7b4162b372d567 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/24/#post-257562 Thu, 18 Aug 2016 04:23:57 -0400 Just an heads up about the tank. Before mounting the valve make sure there is no debri roaming around inside it. Got mine from chinka a couple years ago had tiny white flakes in it and about a 2″ long spiral of drill shavings. I should have known better being it was from chinka. A few hundred rounds and the valve started leaking. With only a…Read more

]]> 015fc2defa301b0e4f5918caf867109a lurker-1 replied to the topic My "non lethal" backyard plinker in the forum Other Guns https://talonairgun.com/forums/topic/my-quot-non-lethal-quot-backyard-plinker/#post-257409 Mon, 15 Aug 2016 03:01:33 -0400 I was thinking of getting a holster for it but it’s to heavy and I have an old dog leash to hook to it and just drag it along behind. i’ll get my 75 dollars worth by poking fun at it. :whistle:

]]> a523069844671fde7a1562b2bb1930ec lurker-1 replied to the topic My "non lethal" backyard plinker in the forum Other Guns https://talonairgun.com/forums/topic/my-quot-non-lethal-quot-backyard-plinker/#post-257393 Sun, 14 Aug 2016 21:14:50 -0400 If it were a polish pistol I’d leave it where a thief would steel it thinking it was worth something.
Otherwise, in case of SHTF and I run out of air power, I could always use it to piss off someone. Besides it’s heavy enough to pound nails and at $75 it cost far less than a gov’ toilet seat. :rofl:

]]> ff25fed8126bfc3c8db06e533b147e43 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/24/#post-257390 Sun, 14 Aug 2016 20:59:18 -0400 No idea of the Spitzer BC yet. Not much chance to shoot lately.

Besides, I wouldn’t care to put my Caldwell chrono down range though I still have old “iffy”, a shooting chrony that I’ve only wounded one time with a 25 cal. Slug while making my 1st and only attempt to do a BC test. My failt, I’m pretty sure I haddn’t closed the breech and the…Read more

]]> 40f54407880216fd36d31f4b8d242052 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/23/#post-257207 Tue, 09 Aug 2016 23:23:48 -0400 Bill,

If your AF tank has a rubber sleeve, it comes off essily with an air hose. My air wand has a rubber tip that can get under the edge and not scratch it. If it is more of a rubber boot like the older AF guns, that comes off easier. Otherwise hold one end of the sleeve against the tank while blowing air in the other end. It will want to move.…Read more

]]> 9a5d0998fa773efe4c74e84f1ddbd688 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/23/#post-257200 Tue, 09 Aug 2016 18:16:40 -0400 OK, ah somewhere amongst 1,044 pictures on this phone;
[=0]

From back to front, WokButt;
chinka CF Tank;
E-TAC with gauge & foster fill;
Doug’s Valve, Breech, Hammer & Spring;
AR15 type grip on custon 1 of 3 made unobtainable frame hugging trigger guard;
?Trigger Supper Sear? Installed by Doug-an excellent improvement!;
32″ TJ Hammer Forged…Read more

]]> de7ec4d07357dbd9c8bc19829622e178 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/23/#post-257180 Mon, 08 Aug 2016 23:17:47 -0400 quote wll2506:quote LURKER #1:With my “257 NOBLE” Condor here is a string of 5 X 85 gr Spitzer bullets
from about 3400 PSI to about 2950 PSI Power Wheel 2:
1) 973
2) 987
3) 988
4) 984
5) 975
AVG = 981
SD = 6.5
ES = 15

I just punch paper for now and haven’t gotten to shoot it much yet. But I got 10 consecutive X 73 gr. rounds on standard size…Read more

]]> c03441b9fe3119d4d5db53b5875f2753 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/23/#post-257170 Mon, 08 Aug 2016 12:50:56 -0400 With my “257 NOBLE” Condor here is a string of 5 X 85 gr Spitzer bullets
from about 3400 PSI to about 2950 PSI Power Wheel 2:
1) 973
2) 987
3) 988
4) 984
5) 975
AVG = 981
SD = 6.5
ES = 15

I just punch paper for now and haven’t gotten to shoot it much yet. But I got 10 consecutive X 73 gr. rounds on standard size paper target at 200 yards. No…Read more

]]> c498e714fd0ddfbabb0ed44c1398d633 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/22/#post-257136 Sat, 06 Aug 2016 01:47:37 -0400 wll2506,
Roughly speaking if you are several inches (about 3″) high at 20 yards you will be in the ballpark at 100 yards and maybe just hitting 1foot low at 200.
Just a guess for 73 gr 257420 at 950 FPS. Per chair gum.

]]> c9c6864e3fbc3f6a131312bfa1eedd47 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/22/#post-257103 Thu, 04 Aug 2016 16:23:12 -0400 I try to stay on topic at least a little but I feel that all here are my good friends.

Knife,
The dr put off running a pipe cleaner thru my carotid arteries. Blockage is only 60% & 40%. That was the good news. I got the hospital to make me a CD of the CT scan and I got a beautiful skeletal picture as well as all the info the doctors put off…Read more

]]> f674a817f8b5010f08c32ded976e6a2d lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/22/#post-257012 Sun, 31 Jul 2016 22:42:22 -0400 Knife,
You are correct. My spitzer mold shows daylight to the middle. I hadn’t cheched it out and seasoned it like I did my first two Arsenal molds. On the way home with it from the mail room, I dropped all 3 off at a neighbor to have them milled to fit the Lyman Mag 25 rail. Then too, I see I used way to much Drop Out and have had a battle with…Read more

]]> f57db38d8f555e6f6e8a19404898741a lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/22/#post-256912 Thu, 28 Jul 2016 23:41:10 -0400 I cleaned the molds with acetone and that fixed the size. That frankford arsenal drop out does build up.with repeated applications just like the instructions say. Oh well, I can live with taping the mold to dump the bullets.

I think Ive found the cause of whiskers from the bullet noses. This is a 25 pould max lead pot. Thats 3 pounds more than…Read more

]]> 2b33418bbdb95e5e484327bb5f8dd1fd lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/21/#post-256899 Thu, 28 Jul 2016 19:35:27 -0400 Trying to establish my pots slush point.

Cooling my pot back down from a full fluid meld at readout of 680°F, it finally started forming a Ring Around the Surface at its readout of 650°. Is that surface ring what is being referred to as “Slush” ❓

ON THE OTHERHAND is my pot telling me it doesn’t like to be near full ❓Attachments:

]]> 2f5f8db80f80cbf86bb5e768949d31a7 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/21/#post-256815 Wed, 27 Jul 2016 00:14:45 -0400 I did a hundred or so today but will dump them in for remelt. 50% have wiskers on the nose and they are all to small. Ive been using the Frankford Arsenal Drop Out so Ive probably got an excess build up now.
I switched to another mold and it cast much better.

Lets see, what did the kids do with my Acetone that F. Arsenal recommends for…Read more

]]> 94204170c6193d9ac463d3458c9d2b5a lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/21/#post-256767 Tue, 26 Jul 2016 03:29:04 -0400 NOW YOU TELL ME :sadn:
I spent another HOT day lowering the mold temp and then raising the lead temp to not get more than 1/2 dozen keepers. 😳
Back to square one………..

How about some advice on using a bottom pour lead pot.
I’ve got 4 cavity brass molds and have the tray lined up for center at the suggested 1/4″ gap from the spout.…Read more

]]> 8a2fda8ba4b87597769a187c6d38505b lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/21/#post-256737 Mon, 25 Jul 2016 15:20:38 -0400 Thanks Knife,

I’ll try to synchronize the Lyman thermometer with the Lyman digital Mag 25 pot.

On another forum I read that bullet frosting is caused by the mold being to hot.
That makes sense because I didn’t have that problem before I cranked up my hot plate temp 😳

Today should be slightly cooler so maybe I won’t have sweat running…Read more

]]> 80ed1b7621d7975138e8129491c7d0d8 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/21/#post-256725 Mon, 25 Jul 2016 00:59:32 -0400 Knife,

No. The last times I used it, first I couldn’t get it over 800, next time not over 755, so I thought it was the old Lee lead pot element.
Checking it in the new Lyman digital pot set and steady at 71°, it wouldn’t go over 650°.

How can it be adjusted ❓
There is Not a nut to loosen like an oven thermometer has ❓

I’ve spent 2 d…Read more

]]> aff19afc10540319f35916b1555cc087 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/21/#post-256580 Fri, 22 Jul 2016 02:29:01 -0400 I trusted my Lyman Thermometer over my Lee Magnum melting pot because I took proper care of it, inserting it a full 2″, not leaving it in longer than necessary, and cleaning it off when taken out. Damn thing, like the whores I married it started lying to me. 😳

Anyway, I wanted to upgrade to a bottom pour pot. I received my new Lyman Mag…Read more

]]> f17e7f97b090c9b2587500a59126688b lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/21/#post-256470 Wed, 20 Jul 2016 13:42:07 -0400 I SEE SAID THE BLIND MAN ❗ Me being the proverbial blind man that ventures into potentially dangerous technologies with equipment made readily available to anyone. But, provided without the benefit of extensive education as to potential hazards.

Doug,
We need you for your abilities to produce fine custom air rifles. The bullet samples you…Read more

]]> b3a77463a9086ca71379aa6aff7297c0 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256432 Tue, 19 Jul 2016 19:25:03 -0400 OK,
I cast a while starting at 755°F and when I had a rhythm going I quickly checked the lead temp. and it had dropped to 700° :sadn:
I turned the Dial to Full #9 1/2 and after 1/2 hour it topped out at only 760°.
My Lee Magnum pot is rated at 700 Watts and is either needing the element replaced or just is not powerful enough to keep up with th…Read more

]]> 2a8ed81824199d3189b2d134b82b0ab7 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256422 Tue, 19 Jul 2016 16:28:29 -0400 1st, let me ask another dumb question about BULLET SHAPE. My Arsenal 71gr. Boat Tail mold is dropping an average 71.5 gr. and they look good (to me :roll:). They are only slightly rounded on the tail end (I’m still working on getting up to temperature) BUT since the Boat Tail exits the muzzle from its 3rd band, does it matter so much if the…Read more

]]> 48039db7c8b8ac5f1a3136c30b5c9f7e lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256363 Mon, 18 Jul 2016 02:46:12 -0400 Dyotat100,

I’ll try again but I don’t think my pot will get up to even 850.
Ive got 2 or more of most things so maybe iy’s time to buy a better pot. I would like to try a bottom pour. What kind will do over 900° ❓

]]> e32b4c1ed5d3acc560a9f87dfec298da lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256360 Mon, 18 Jul 2016 00:18:51 -0400 Knife,

That does help ❗
I’m trying to keep beliw 725°F to maintain my 2% tin mix but I seem to get no wrinkles above 750°

There myst be something in the timing of each step that I’m not getting prefect. i still get like a cresent moon shinny area as if the lead is not solid enough. Maybe you can tell from this picture..Attachments:

]]> 060095b028f042cf08bf05febaac6357 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256284 Sat, 16 Jul 2016 02:18:54 -0400 Thanks Knife ❗ I’ll give it a try tomorrow.

BTW, good to hear from you. Where the heck have I been :confusedn:

]]> 72bd0a1d92339b0f204680530b5869fa lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256265 Fri, 15 Jul 2016 18:57:45 -0400 Arsenal 4 cavity brass molds are easier to work with vs a 2 cavity Lyman mold.
They sit nicely across the back edge of my Lee Magnum top dipper pot. Just straddle one bolt head. Oops ❗ I slipped ❗ BUT JUST RIGHT. LYMAN cast Bullet Handbook suggests resting one corner in the lead for more than 30 seconds and if lead doesn’t stick the mold…Read more

]]> 61e500f958b354b6fe5f2e6d2ebe97fe lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256131 Wed, 13 Jul 2016 00:48:49 -0400 Can I call it a 10 shot group ❓
Shot fron a shooting rest at 200 yards.
Working out problems I’m causing but at least now I’m on paper.
The one marked lowest shot was a 92 gr that I temporarily ran out of.
The other 10 are 71 gr 257420 Boat Tail bullets from my Arsenal 4cavity brass mold.

]]> e28d74208d57abd3b48b33820f920d4c lurker-1 replied to the topic My "non lethal" backyard plinker in the forum Other Guns https://talonairgun.com/forums/topic/my-quot-non-lethal-quot-backyard-plinker/#post-256087 Mon, 11 Jul 2016 04:13:55 -0400 I saw this thing at WM and was curious about the nitro piston and never had a break barrel before. It sure does need a trigger job ❗

Wildfire
Can you give any pointers ondoing the trigger job ❓

]]> 835b7d3116206a11ea6a04cd3f4f1b10 lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/19/#post-256070 Sun, 10 Jul 2016 14:35:34 -0400 Nah, “DNS” has negative connotation in retail whereas “NOBLE .257” is much more representative of the Quality, Power, and Support that Doug Continues to provide. Personally I think Doug’s pricing is very low.

Customization in itself presents numerous unique challenges that a yoyo may never fully understand or appreciate but Doug has proven his…Read more

]]> 5ed61df865b26561811967d7e1464dda lurker-1 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/19/#post-256047 Sat, 09 Jul 2016 21:45:00 -0400 I’m trying hard to get myself together enough to finish sighting in this beauty that Doug custom built for me.Attachments:

]]> 525c6214b390bdcc655eb6ada70ca408 lurker-1 replied to the topic Loving This Vulcan Tactic .25 in the forum Airgun Technology https://talonairgun.com/forums/topic/loving-this-vulcan-tactic-25/#post-254563 Tue, 07 Jun 2016 20:03:26 -0400 Anybody know??

Would a Tactic STOCK attach to a Bullpup ❓ ❓

]]> ba082066127e531e453882d3bbbc761d lurker-1 replied to the topic Can You Please Help Me Out....? in the forum General Chat https://talonairgun.com/forums/topic/can-you-please-help-me-out/page/2/#post-254550 Tue, 07 Jun 2016 15:47:30 -0400 Oh yah, I’m in :8:

]]> 20acc121f749cf1691315ae10a12cf21 lurker-1 replied to the topic What's up with the forum? in the forum General Chat https://talonairgun.com/forums/topic/what-s-up-with-the-forum/page/2/#post-254440 Sun, 05 Jun 2016 12:36:17 -0400 Sounds great :8:

In the meantime I guess I need to re-Subscribe to my favorite threads on TAG that I haven’t been getting notifications for.

]]> 0880e3b4f422d34e9489611a712c32f3 lurker-1 replied to the topic What's up with the forum? in the forum General Chat https://talonairgun.com/forums/topic/what-s-up-with-the-forum/page/2/#post-254426 Sun, 05 Jun 2016 07:01:01 -0400 OK Zonk. You can be my new baby’s god father!

I will be ordering a new mold and will pickup casting again but dyotat100 is going the extra mile and providing samples as well as making an appropriate sizer for it.

]]> 82ca23fb5ccbb3c30998923ab4822350 lurker-1 replied to the topic What's up with the forum? in the forum General Chat https://talonairgun.com/forums/topic/what-s-up-with-the-forum/page/2/#post-254402 Sat, 04 Jun 2016 20:57:56 -0400 Spent my Vulcan kitty on a newer 16 channel 10 camera,1080p security system. At least it could all run on 12 VDC.
BUT, hold your horses (oops don’t let your wife see this mention of the string of poloponies you bought) or was that Jacky Gleason?
Anyway, my 257 is done and may be arriving soon.
Can you set out a 1,000 yard target. No need to…Read more

]]> a03d49109902338eb98d3defb7deb0b3 lurker-1 replied to the topic What's up with the forum? in the forum General Chat https://talonairgun.com/forums/topic/what-s-up-with-the-forum/page/2/#post-251106 Sat, 16 Apr 2016 16:54:57 -0400 :suprisedn: quote Zonk:Lurker where the hell have you been?? We thought you grabbed your Vulcan and left the country…..
Been fighting the survival problems of getting old ❗
Been accumulating long term storable foods, putting together a couple BugOut bags, bought a 4 seasons tent etc etc Yeah I still have the mini motorhome but how far could…Read more

]]> bf2e2d6997001e122391fab70ec99bf6 lurker-1 replied to the topic What's up with the forum? in the forum General Chat https://talonairgun.com/forums/topic/what-s-up-with-the-forum/page/2/#post-250878 Wed, 13 Apr 2016 23:26:50 -0400 just saying…..this format looks GREAT now ❗
EVEN the colors ❗
or is it because I am changing from viewing on an iPhony to
a 49″ smart ass TV :mrgreen:
Now if I can figure out how to hook in a USB keyboard……….
then, I`d be happy even with my OLD STYLE
high performance
short stroker. :11:

]]> 7351c760a8fd45a26f9817ad1f2d3e90 lurker-1 replied to the topic .257 condor with de-resonator installed in the forum General Chat https://talonairgun.com/forums/topic/257-condor-with-de-resonator-installed/#post-248720 Mon, 14 Mar 2016 20:02:05 -0400 Dporter,
Its been a while but ive added stuff a few times while Doug still has it in his shop. I hoped he or some other good shot would use it in competition so I could carve a notch in the CF tank. 😆

After I sent it off to the left coast I bought the forward cocking Vulcan .22. Bullpup. It amased me that the short Vulcan easily shot at least…Read more

]]> 271b089cc24fe2c9b07d7223848ef4b9 lurker-1 replied to the topic TAG forum changed looks in the forum General Chat https://talonairgun.com/forums/topic/tag-forum-changed-looks/page/2/#post-248656 Mon, 14 Mar 2016 07:25:12 -0400 Still looks poor, navigation ain’t as easy, and PUT BACK THE ORIGINAL POSTER INFO :angrymob:

]]> 552e22a8328093e25b0a0c36e414bce0 lurker-1 replied to the topic vulcan to-be rifle bench and shooting vice in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-to-be-rifle-bench-and-shooting-vice/#post-247911 Sun, 06 Mar 2016 17:49:41 -0400 Kris,
EBay has a new model of the PanaVise 350 NIB.
I think it is for heavier items.

]]> 8323bf2ddab033e0b89ef8dc7ffc99ac lurker-1 replied to the topic .257 condor with de-resonator installed in the forum General Chat https://talonairgun.com/forums/topic/257-condor-with-de-resonator-installed/#post-247377 Tue, 01 Mar 2016 13:40:32 -0400 Thanks. I found a lot of Limbsaver bow stuff at the local big box store but nothing for rifle barrels.

When you get some time with it let us know what experience you have with it and how to adjust it.

Thanks for the reply.

]]>