Hello, Eduard.

Thank you for your comment. You were right. It was mis-measuring.

I used two speed meter, and as both showed irregular…Read more

Thank you MEROU! Please also check my trick above.
I wished I could calculate as precisely as possible, as wind in Japan is getting stronger.

Your writing is impressive.

Marco

Thank you Keyser. The issue was that if I set the zero to 50m, and input head wind, it means that I have zeroed my gun at 50m in that head wind, and calculating holdover at other distance. If I changed the wind, zero condition changes automatically. This was…Read more

The reticle is mrad, and the turret is MOA.

Yes, GA profile and BC of 0.036. Hold over value is correct for no wind condition.

Marco

And when the mags come in Japan, it is modified to 5 shots.
(Do not ask me why and what I think about it)

Marco.

In addition, the shop keeps one gun in stock, so that something is really necessary besides replacement parts, the shop can take the parts from the gun and repair the customer’s right away. Shop can…Read more

Interesting information I would like to know more.

Marco

Marco

My question
Is .25 Matador capable of shooting new 34grain .25cal pellet at 950ft/s?

Reply fro Eduard
You will need to drill the transfer port from the back plug to the
breech, to have more air to come, but if you do it JSB King will not
be used for…Read more

Marco

I could not stop reading…

Marco

Yes, I really like the combination of EDgun and JSB!

Marco.

Hoot:

+1. Most convincing.

Marco.

If the pellet is at the muzzle, I would try to push it back to the breach side, as pellet might be slightly smaller already
at the choke of the…Read more

a kid who want to make sure he knows everything before graduating from diapers,
quote Leadbetter:

and a bad teacher who tells dirty stuffs.

quote Hoot::hoot:

In Arkansas we smell our fingers!

Hoot:

Marco

The Edgun is named after Ed. It’s his baby and his alone. If he wanted to farm out production, it would be in Eastern Europe where he could be present to control quality. The instant the gun loses his personal inspection and constant improvements, it ceases to be an Edgun, and it would lose the value he has put into…Read more

For those who know Ed, speculation about nothing is, really nothing more than nothing.

Better show the proof asap, if there is any, otherwise no proof will only prove that somebody tried to do something…Read more

This is the result he got so far.

He turned the shroud, every 90deg, but which ever the shroud is the barrel bends to upward.
And we could not change the parts, as he is trying himself and it is far from the gun shop.

He torqued to just before the barrel bends up, and he torqued another…Read more

http://talonairgun.com/forum/viewtopic.php?f=34&t=31748

I know that the weaver rail is designed to have 0.5deg tilt, according to Ed’s information, which should give zero at 100m.
But in fact, some guns shoot much higher than that, and possibly barrel is aimed higher than it is designed during assembly.

Marco.

~ GKU

Hello, GKU

Thank you and that was a surprise!

Marco

Hello, hsnmz.

For the accuracy of both guns, mine is good, my friends, not so good.

My gun shooting at 50m out door. Light left to right wind.
5 shot to each target and total of 65 shots.
Average speed is 940ft/s. There were speed drop after No.50, and significant drop, and No.61…Read more

Similar issue reported from my friend, so let me join in.

My friends gun has ES of 22ft/s after break in, and the speed does not get higher to 950ft/s by HSTA adjustment.

Two numbers are mine and friends.
Average speed: 935ft/s, 908 ft/s
note:mine can get to 960ft/s by HSTA, this is just then I got the full data.
ES:13 ft/s,…Read more

Currently, my friend seems to be struggling by himself and I do not have contact from him.
In the April or May, him and I might try for exchanging parts of the guns, and try to find out what the issue is.

Thank you.

Thanks for the pics.
Could you ask for more resolution or close ups?
Is the barrel problem less or more when you dismount the stock and trigger/hammer?

Regards, Robert.

Hello, Robert.

I hope this will be some help. I have scanned from hard copy of photo, and the photo is originally not really high resolution.
So,…Read more

Hello, SECoda.

Thank you. It was first time to use Photobucket, and I got it!

Marco

Sniperqty AirGun

Hello, Sniperqty. I am very fond of your long range hunting video by Cricket.

Thank you for your reply. Could you tell me what you…Read more

in Feb, i imported one Edgun Matador long version .22cal, the barrel has the same bend upward, i also have noticed very soon, directly when i inspected the gun , i sent an email to Ed explained to him,

he told me the same, he said it will not effect the accuracy and all,,,he asked me to put…Read more

I got some pics from my friend. I hope you can see it.

If you got some idea, please help!

http://s1066.photobucket.com/user/marco_jpn/media/Matador_zps3pxw5x3g.jpg.html

Marco

Whomever tightened that so much should have their tools taken away. :angrymob:

Hello, Synopys

It was not when the gun was reassembled. It was like that when the gun was delivered.

Marco

Hello, Huntjunky.

Well, I have consulted with Ed, and he says it does nothing to do with accuracy and stability, and in fact, the gun is accurate and stable. So, it is not gun’s accuracy and stability issue. Ed says he…Read more

Regards, Robert.

Hello, Veerkracht.

I have seen your records in 100m shooting! Impressive! Thank you for your response.
This is the picture.

Lower side, you can see rifling from breach to the muzzle.

On the other hand, Upper side, you can see the rifling from the breach to the middle…Read more