Talonairgun | merou | Activity https://talonairgunforum.com/members/merou/activity/ Activity feed for merou. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 9874496d24145c3d7ad400697f86380f merou replied to the topic Just in: my new R5 long in the forum EdGun https://talonairgun.com/forums/topic/just-in-my-new-r5-long/#post-274472 Fri, 02 Mar 2018 09:37:26 -0400 Hi oldgoat,
I’m happy to see you here.
It’s a long time we don’t heard you.
We learn a lot with your experience in the past with Edgun.
Thank you for your vidéo about Edgun.

https://www.youtube.com/user/oldgoat33

Your contribution in the forum is verry important for us.
Years ago you show us how to open a matador for play with the regulator…Read more

]]> 162882ceaeee92e82688f4e2a30f6a83 merou replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/19/#post-274266 Sun, 11 Feb 2018 16:29:24 -0400 quote Chilavia:I did this time and already is ok
I have edgun matador 22 r3m long
I did set huma reg on 130 and hammer weight i did test with jsb 25 gr , maximum speed was 276 m/s but 34 gr jsb only 246 m/s
For next try I should increase huma reg to 140 and then start to corony 25 gr and 34 gr jsb
Do you have any results about thise pellets Edgun…Read more

]]> ec37ff2b0bc326eebdbac1a9c60e598d merou replied to the topic Edgun pressure guage in the forum EdGun https://talonairgun.com/forums/topic/edgun-pressure-guage/#post-273825 Sat, 13 Jan 2018 20:09:45 -0400 Hi John
You can go here too :
https://luchtbuks.com/nl/edgun-edmu-electronische-meet-unit
Joost have many of them
Mika

]]> c0cb1e503babdfe0e90fcff60fdd5eab merou replied to the topic My Matador R5 just landed... in the forum EdGun https://talonairgun.com/forums/topic/my-matador-r5-just-landed/page/6/#post-273438 Tue, 19 Dec 2017 08:42:53 -0400 quote PiterM:It’s so cool to see more of them! And here’s mine again on a cold winter day… not much shooting these days.

Great photos Piter.
:8:

]]> dedc4788ce9d78c308faef0444236311 merou replied to the topic My Matador R5 just landed... in the forum EdGun https://talonairgun.com/forums/topic/my-matador-r5-just-landed/page/6/#post-273437 Tue, 19 Dec 2017 08:41:28 -0400 quote RONIN001:Its 30 ahoots!! Not 5 not 10 but 30 at 50 meters

What more do expect with 18″ barrel with 30 shoots at same aiming point? I think thats pretty darn good

Yes correct 30 shoots not 5 or 10 .
Cal .30 isn’t the same impact of cal .22.
Not the same size of the pellets and you’ve got 100 joules.
And I just open the parcel and put a…Read more

]]> 091f12982324ff4a4397e2722c841406 merou replied to the topic My Matador R5 just landed... in the forum EdGun https://talonairgun.com/forums/topic/my-matador-r5-just-landed/page/5/#post-273363 Fri, 15 Dec 2017 21:03:44 -0400 The new R5 arrived in FRANCE, I did not have much time to test it with bad weather.
Today I adjusted my scope quickly before dark, there was a lot of wind, and not much light.
Here is a first result at 50 meters with a speed set at 260 m/s and 30 shots.
for comparison I put a coin of 1 euro to realize the result.
I find the result quite…Read more

]]> c73da276d6c09f5d52b3f8e2e4131dc7 merou replied to the topic My Leshiy with it's new scope in the forum EdGun https://talonairgun.com/forums/topic/my-leshiy-with-it-s-new-scope/page/2/#post-265633 Tue, 31 Jan 2017 20:36:45 -0400 I find this :

Vector Optics

http://www.ebay.fr/itm/Vector-Optics-Templer-1-4×24-FFP-Tactical-Rifle-Scope-New-/121508425933?hash=item1c4a7770cd:g:BgsAAOSwaNBUgZVe

Could be interesting.

]]> 9eac7fef6e8a25f84b9861a82f89c75f merou replied to the topic Leshiy review in the forum EdGun https://talonairgun.com/forums/topic/leshiy-review/#post-262211 Mon, 28 Nov 2016 22:21:05 -0400 Excellent Keyser, thank you for the video and the informations.
The accuracy of this Leshiy is very great.
Thanks a lot.

]]> ab89537f30779f4027ffed73cb26cdb2 merou replied to the topic Some lelya love.... in the forum EdGun https://talonairgun.com/forums/topic/some-lelya-love/page/2/#post-262007 Thu, 24 Nov 2016 18:16:11 -0400 quote PiterM:Easy fix… if you know where to look 😉

Yes Piter exact :whistle:
Thanks

]]> 569849cbb0ae6296206b3955d69f1845 merou replied to the topic Some lelya love.... in the forum EdGun https://talonairgun.com/forums/topic/some-lelya-love/page/2/#post-261991 Thu, 24 Nov 2016 16:44:52 -0400 quote MEROU:quote MEROU:Hello Guys,

Thanks all for your answers, I finally find the problem of the blow-back.
I opened the system and find no orings on the bolt..
I put two orings + grease of silicon and play a little with the screw and voila…
everything is ok.

The image of the bolt with no oringsAttachments:

]]> ae0734a0f65653faf8df8f958565da3e merou replied to the topic Some lelya love.... in the forum EdGun https://talonairgun.com/forums/topic/some-lelya-love/page/2/#post-261990 Thu, 24 Nov 2016 16:40:10 -0400 quote MEROU:Hello Guys,

Thanks all for your answers, I finally find the problem of the blow-back.
I opened the system and find no orings on the bolt..
I put two orings + grease of silicon and play a little with the screw and voila…
everything is ok.

]]> 7d4922cb511c571d989a528d8ded1ba6 merou replied to the topic Some lelya love.... in the forum EdGun https://talonairgun.com/forums/topic/some-lelya-love/#post-261989 Thu, 24 Nov 2016 16:33:30 -0400 Hello Guys,

Thanks all for your answers, I finally find the problem of the blow-back.
I opened the system and find no orings on the bolt..
I put two orings + grease of silicon and play a little with the screw and voila…
everything is ok.

]]> 9b3dfb0ec3f3ab3e708ab474cdf1b712 merou replied to the topic Some lelya love.... in the forum EdGun https://talonairgun.com/forums/topic/some-lelya-love/#post-261942 Wed, 23 Nov 2016 20:22:19 -0400 quote RomeoAlfa:My technique for adjusting the breech blowback screw is to first unscrew the screw and add some blue loctite to it. Next screw the screw all of the way in until the screw pushes open the breech. Next unscrew the screw 1/4 turn at a time until the blowback is gone. If your gun has blowback no matter the position of the screw then…Read more

]]> 75be1fda6a146b32c2c0b9cef1b23f50 merou replied to the topic Some lelya love.... in the forum EdGun https://talonairgun.com/forums/topic/some-lelya-love/#post-261787 Mon, 21 Nov 2016 21:21:31 -0400 Piter,

Thank you for your answer.
I tried to open it and find a solution.
If someone have an idea…
Thanks all.

]]> 756a9042677b425c0e80b705b3a9cc50 merou replied to the topic Some lelya love.... in the forum EdGun https://talonairgun.com/forums/topic/some-lelya-love/#post-261748 Mon, 21 Nov 2016 11:49:31 -0400 Hi Parrots,

Thank you for answer.

Another idea ? Piter, Wingman, Keyser, RomeoAlfa ? (cal.22)

The speed is reduce to 200 m / S , I tried the screw in every position but the blow back is present at every shots

The positiv thing the gun is very accurate at 80 – 100 meters

Thanks

]]> 8af329713c84766b6ec088eb97f9ba7a merou replied to the topic Some lelya love.... in the forum EdGun https://talonairgun.com/forums/topic/some-lelya-love/#post-261652 Sun, 20 Nov 2016 11:42:02 -0400 Need Feedback with multi shot breech : http://www.talonairgun.com/forum/viewtopic.php?t=34104

I see the video : (of Ernest) .177
1. Edgun Lelya sliding breech blow back adjustment

I try the screw at the back like Ernest but with a cal .22, and it’s not work better.

Have you better Idea ?

The multi shot breech…Read more

]]> 1a8ce0b89b057afb73f8634cc1c59376 merou replied to the topic cleaning the barrel! !!! in the forum EdGun https://talonairgun.com/forums/topic/cleaning-the-barrel-d55/#post-259670 Wed, 12 Oct 2016 08:24:25 -0400 Good products : :8:…Read more

]]> fcf458bca3907cdb7dc4b269561b278a merou replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/13/#post-258020 Sun, 28 Aug 2016 20:27:45 -0400 Hi guys,

Mika

]]> a1f74e09f98d8272701ac1b829791c88 merou replied to the topic New name for the class of the gun. in the forum EdGun https://talonairgun.com/forums/topic/new-name-for-the-class-of-the-gun/page/3/#post-248457 Sat, 12 Mar 2016 00:18:38 -0400 WantED
:butkick:
Mika

]]> 7547c4daac94b5711565ce1d10470a29 merou replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/7/#post-246587 Thu, 18 Feb 2016 17:14:48 -0400 quote keyser soze:Mika I lowered my regulator pressure to 135 bar with the new 3mm valve and I am now getting 28 shots on regulator. I used to get 18-20 shots. I still want to play with the regulator a little more because I think I can get the ES a little lower.
Hi Keyser yes it’s a great solution .
I’m happy for you And all the guys.
When…Read more

]]> 758278d913deb118311da870362a7c09 merou replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/7/#post-246575 Thu, 18 Feb 2016 15:09:27 -0400 Just a comparatif for my 0.30 (just for informations)
My choice since a long time ago.

I never said it’s the best choice , but work fine like this I think.

Regards,

Mika

]]> b80b50365ba0378034f6a6c1183cabc8 merou replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/7/#post-246489 Wed, 17 Feb 2016 18:41:07 -0400 quote keyser soze:Mika I think you just got lucky. There are always outliers in every system. Enough people have contacted me who have had the exact problem with a least one valve that I am confident that the 2mm valve stem is not appropriate for the .30 EDgun. Everyone I have communicated with (15 owners of the gen 2) all had their guns break…Read more

]]> 2c3c7aeea5213723b4264311476ac985 merou replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/6/#post-246467 Wed, 17 Feb 2016 11:09:30 -0400 quote Airgunwhore:quote MEROU:Hello guys,
I look since a long time the subject about the cal .30.
I’ve got the second generation cal 30, I’ve got 4300 shots with it and no problem with it.(one year old)
Since I’ve got it I tun it at 265 m/s like my cal 5.5mm.
I find the best accuracy at this speed 263 / 265 m /s.
I feel the air reservoir at 215…Read more

]]> b64452f048613836393534e2589c9d6e merou replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/5/#post-246127 Sat, 13 Feb 2016 13:18:27 -0400 Hello guys,
I look since a long time the subject about the cal .30.
I’ve got the second generation cal 30, I’ve got 4300 shots with it and no problem with it.(one year old)
Since I’ve got it I tun it at 265 m/s like my cal 5.5mm.
I find the best accuracy at this speed 263 / 265 m /s.
I feel the air reservoir at 215 bars because I find no too much…Read more

]]> ce37412f6fc9da8fc40f6c3443b06309 merou replied to the topic Ballistic calculation in windy condition in the forum EdGun https://talonairgun.com/forums/topic/ballistic-calculation-in-windy-condition/#post-241156 Sun, 13 Dec 2015 19:02:24 -0400 Share my references with you :

1)

2)

3)

4)

5)

6)

7)

8)

]]> 6c4900834513d3ed117daba7098594d4 merou replied to the topic EDgun Lelya Video in the forum EdGun https://talonairgun.com/forums/topic/edgun-lelya-video/page/2/#post-239952 Mon, 23 Nov 2015 11:29:45 -0400 Hi Keyser,
Congratulations on your beautiful video , yet another confirmation that the material’s Ed is really good.
You have a lot of merit in the distance as far away as you have chosen a lelya .
As owner of a Lelya in 4.5mm I already had the certainty saw the results I had.
That pleases to see enthusiasts as you.
What is your preference between…Read more

]]> dc621e1a8849291181faf5a84175f61b merou replied to the topic Edgun doing it at 100 meter match in the forum EdGun https://talonairgun.com/forums/topic/edgun-doing-it-at-100-meter-match/#post-238530 Tue, 03 Nov 2015 13:47:41 -0400 quote Veerkracht:Thanks Endo!

This was a great match, I also shot the smallest 5 shot groop of the day.
I think it was about 15MM, it is dificult to calculate it out of the results.
The track at Katwijk has a digital counting system.
My results:

Some pics:
http://www.luchtbuks.net/index.php?showtopic=99716

Edit.
Total…Read more

]]> 2cddfe66e562479d898ebdb663c1c89a merou replied to the topic IWA 2015 EDUARD GAFAROV in the forum EdGun https://talonairgun.com/forums/topic/iwa-2015-eduard-gafarov/#post-235639 Tue, 15 Sep 2015 14:41:48 -0400

]]> 6b5643503c2dd2106387f69f5349ebf6 merou replied to the topic Hands on LElya n Veeeles 2015 in the forum EdGun https://talonairgun.com/forums/topic/hands-on-lelya-n-veeeles-2015/#post-235242 Tue, 08 Sep 2015 11:08:12 -0400 quote RomeoAlfa:Both guns look really nice! I wish Ed would make the Veles with a built in smaller moderator like the Ocelot. The gun with the moderator is so long!

Like this …

]]> 88809f47ad3c45d107f2d334cec5c035 merou replied to the topic Hands on LElya n Veeeles 2015 in the forum EdGun https://talonairgun.com/forums/topic/hands-on-lelya-n-veeeles-2015/#post-235221 Mon, 07 Sep 2015 19:00:35 -0400 quote mughram:Finally ! In Kuwait
I consider myself a lucky guy lol this is my 2nd lelya but i sold old one it was 177 … and now new toys for meeeh

Hi Mughram,

Where is the picatinny rail on the Veles ?
I don’t see it, strange ???

Merou

]]> 994b42f67f2bd115e5b1bef2a6575a3a merou replied to the topic Compressor Meter Hours in the forum BullPup General Chat https://talonairgun.com/forums/topic/compressor-meter-hours/#post-232697 Wed, 29 Jul 2015 08:49:10 -0400 quote humdinger:Great idea Merou and thanks. I already ordered this identical unit off of Ebay for my Bauer Utilus. This sure beats trying to guess how many hours are on the filter and oil changes. I didn’t realize they were so cheap and easy to install.

Hi Humdinger,

I’m happy for you it was useful, and yes so cheap and easy to install…Read more

]]> 7eba04e6e553e7d348d51bcc90f7590e merou replied to the topic Extra long range shooting with matador .25 and .22 in the forum EdGun https://talonairgun.com/forums/topic/extra-long-range-shooting-with-matador-25-and-22/#post-232696 Wed, 29 Jul 2015 08:41:07 -0400 Hi Gerard,

Thanks for your videos, very nice videos.
Good shoots.

Best regards,

Mika

]]> cd9d778c1adc22648055e8b006e2e6fb merou replied to the topic Purchased a new EDgun Matador R3M (.25) (pics) in the forum EdGun https://talonairgun.com/forums/topic/purchased-a-new-edgun-matador-r3m-25-pics/#post-232695 Wed, 29 Jul 2015 08:34:44 -0400 Hi Hemn,

Congratulations, now you know what is the new Standard Matador in 0.25.
Very accurate like the new standard Matador in 0.30.
Like Gerard said :
130 bars in 0.25 (full at 220 bars)
150 bars in 0.30 (full at 250 bars)

Have a good time with your new toys,

Best regards,

Mika

]]> d2da5b5aaf3a3f8627c10d7264ba89d4 merou replied to the topic Compressor Meter Hours in the forum BullPup General Chat https://talonairgun.com/forums/topic/compressor-meter-hours/#post-231443 Tue, 14 Jul 2015 09:51:30 -0400 quote LarryW22:Well done Mika, lots of reliable air for your Edgun!!

Regards
LarryW 😎

Hi LarryW,
thanks a lot.

Mika

]]> 0c4c2f50a8c90db3009eeb219d82f7bf merou replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/page/3/#post-229280 Sat, 20 Jun 2015 13:29:49 -0400 quote FatDude:i lke what ed had done to this gun! i wonder if these changes are also found in the standard length version (is there a standard length 0.3?)

Mine is a standard version ☺

]]> c6e166bb4acf870d9bc5a9743e3d15be merou replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/page/3/#post-229204 Fri, 19 Jun 2015 20:28:01 -0400 New system protection :

]]> ccfdc0127ffe0bc2c76ed5988ca31c8b merou replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/page/3/#post-229095 Thu, 18 Jun 2015 21:25:15 -0400 quote shooter3:The legend says this new .30 is quieter than :hoot: ‘s .25 after applying all magic with LDC.

it’s not a legend…
it’s reality.

]]> 2cd271b5785d37448b4de39c7c324268 merou replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/page/2/#post-229028 Thu, 18 Jun 2015 06:49:30 -0400 The Power…

]]> b90657ee49f9d8484b16252b7aad991a merou replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/page/2/#post-228920 Tue, 16 Jun 2015 21:21:47 -0400 FIRST TESTS WITH ONE EDGUN STANDARD CALIBER 0.30

1) START AT 250 BARS :

2) WITH JSB / EDGUN PELLETS : 2,9 grammes / 44,75 grains

3) INPUT IN THE CHRONY : WEIGHT 2,90 grammes

4) MY FIRST SHOOT : 1/25

5) MY LAST SHOOT : 25/25

6) END AT 145 BARS :

7) THE RESULTS :

]]> 9050bf72c10a57dcf7ee740baa2c22f2 merou replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/page/2/#post-228878 Tue, 16 Jun 2015 11:06:41 -0400 quote keyser soze:BC is .043 for the 44.75 30s
Hi Keyser thanks a lot for the informations.
Mika

]]> a5016c7114747ddc85f07d8b391b32e5 merou replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/#post-228869 Tue, 16 Jun 2015 06:52:01 -0400 quote shooter3:MEROU, how many shots per fill? What is v0? Accuracy?

Hi shooter3 I don’t look about the number of shots per fill.
I think Éd said 25 consistant shots at 270 m/s for the standard calibre 0.30.
I will test this week-end for you.
The scale for shooting is betwen 250 bars to 160 bars.
Yes it is very accurate, my firsts tests 50…Read more

]]> 798660dd7275529f2ac2e23ff91db577 merou replied to the topic Edgun Matador .30 long 2015 in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-30-long-2015/#post-228741 Sun, 14 Jun 2015 21:49:31 -0400 I Just test this New one at 150 meters.
Just exeptional gun.
Fabulous, Just crazy, very powerfull .
The crows don’t like it…




]]> 8b6705559d92d6f1a38972bca15bea18 merou replied to the topic NEW SCOPE EDGUN 10 X 44 SF IN FRANCE in the forum EdGun https://talonairgun.com/forums/topic/new-scope-edgun-10-x-44-sf-in-france/page/3/#post-227139 Fri, 22 May 2015 16:21:32 -0400 quote octavius:quote keyser soze:Nice scope, I want one. Ed are you going to send some to Tony?

Hey Keyser are you sure you want this scope?? 😀

quote keyser soze:You may be surprised how many times I have had a wandering zero on my scopes. I have gotten to the point where I do not buy cheap Chinese scopes. The way you check the gun is first…Read more

]]> cc4c4357c0c4ac7723824ac0cb50600e merou replied to the topic Lelya Gear (what cha got! ) in the forum EdGun https://talonairgun.com/forums/topic/lelya-gear-what-cha-got/#post-227109 Fri, 22 May 2015 07:32:09 -0400 quote Wingman NZ:Jealous much? :biggrinn:

Much Jealous !! :biggrinn:

]]> 324d7647e0a7fa761df060f451f1ab54 merou replied to the topic NEW SCOPE EDGUN 10 X 44 SF IN FRANCE in the forum EdGun https://talonairgun.com/forums/topic/new-scope-edgun-10-x-44-sf-in-france/page/2/#post-227001 Wed, 20 May 2015 12:12:34 -0400 quote Hemn:Brother Merou,,,

nice pics ,,, i really planned to buy them,,but Ed said still not available in EU,,,

could you please let me know the adjustment range for elevation and windage ?? i mean the MOA for both of Elevation travel and windage of your Edscope?

thanks

Hi Hemn,

I saw the stock at philippe Edgun France there…Read more

]]> fc5a59068967d562bf917d04789eea4d merou replied to the topic NEW SCOPE EDGUN 10 X 44 SF IN FRANCE in the forum EdGun https://talonairgun.com/forums/topic/new-scope-edgun-10-x-44-sf-in-france/page/2/#post-226997 Wed, 20 May 2015 10:13:31 -0400 More Pics with the reticule of Edgun scope :

]]> 56d2939aaa792db2c23eb28a7ada2f82 merou replied to the topic EDGUN / JSB it is not a Hazard... in the forum EdGun https://talonairgun.com/forums/topic/edgun-jsb-it-is-not-a-hazard/#post-226996 Wed, 20 May 2015 10:01:46 -0400 The diferent CALIBRE : (EDGUN / JSB)

4.5mm / 5.5mm / 6.35mm / 7.62mm

]]> 0a1624135068eb033fadc0a6c51f839e merou replied to the topic EDGUN / JSB it is not a Hazard... in the forum EdGun https://talonairgun.com/forums/topic/edgun-jsb-it-is-not-a-hazard/#post-226843 Mon, 18 May 2015 09:11:15 -0400 https://www.youtube.com/user/TeamAirGunPerette

]]> cabb0637aeb94618ae2d52635b7dbc4b merou replied to the topic Substitute for Matador fill probe? Anyone got a spare??? in the forum EdGun https://talonairgun.com/forums/topic/substitute-for-matador-fill-probe-anyone-got-a-spare/#post-225933 Tue, 05 May 2015 09:12:51 -0400 Hi HOOT,

Another link if you need.

http://luchtbuks.com/en/edgun-vulplug

Best Regards,

Mika

]]> 58253824bbed27b2378b937ba2556ca1 merou replied to the topic Lelya Shipment Update? in the forum EdGun https://talonairgun.com/forums/topic/lelya-shipment-update/page/14/#post-224894 Tue, 21 Apr 2015 05:57:08 -0400 quote Hoot::hoot:

All things come to those who wait….

Gloatingly yours,

Kindly ‘Ol Uncle Hoot:

“There’s them that have, and them that have not…it’s not always the Good that get the goods, in fact it’s quite the opposite!” Hillary Clinton circa 2014

Hi Hoot,
Congratulations,
I’m very happy for you.
Take care.

Mika

]]>