Talonairgun | mistman | Activity https://talonairgunforum.com/members/mistman/activity/ Activity feed for mistman. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 2540c733b36b737a9ef122a1a1ffc856 mistman replied to the topic lord altros Regulators??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/lord-altros-regulators-d42/page/2/#post-171148 Tue, 16 Apr 2013 19:48:22 -0400 quote oldgoat:If you want to try it, so I would recommend to wait about three weeks for the new regulator body that have stop the plunger regulator in the case of the valve on the rifle is closed, and the piston will remain in the regulator and it is not necessary to pisto re-push to regulator.
With kind regards

Ondrej

http://www.altaros.cz

I think…Read more

]]> f3797e16f033b4a0f6945d40f1ecb2a9 mistman replied to the topic lord altros Regulators??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/lord-altros-regulators-d42/page/2/#post-165867 Sun, 27 Jan 2013 16:56:21 -0400 quote spanishjohn:How would u go about making a larger pre chamber? I have one of these regs and it’s great.

The gauge what is the thread size I damaged it is it1/8-27ntp? I’m using a blodnob valve what’s urs?

I would make one the same dimensions the regulator chamber is but this time hollow.

The chamber would have female threads on one end to…Read more

]]> 3a342d1db7b3c075f0bd684c088a6597 mistman replied to the topic lord altros Regulators??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/lord-altros-regulators-d42/page/2/#post-165861 Sun, 27 Jan 2013 05:49:26 -0400 I get 15 consistent high power shots at 60ft with an 18inch .25 barrel and the 31gr match kodiaks.(Regulator set to max)
Just too accurate at 100 yards.
Now if I were to move on to 24 inches barrel and a larger prechamber for the regulator, I am sure I would hit the 90ft mark.
But I would loose on LOP, which I dont want to compromise niether the…Read more

]]> 37f3085a84d509795dda74551110d6a4 mistman replied to the topic lord altros Regulators??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/lord-altros-regulators-d42/page/2/#post-165848 Sat, 26 Jan 2013 13:51:07 -0400 quote Dyotat100:What are you using for a valve to try and get 190 fpe in .25?.

Its in the making am in the early stages. It a project I am working on and soon as I have the desired results with accuracy I shall post the results.
Lack of resources are slowing my project down.

quote Dyotat100:I get 200 fpe with .257 but I’m using my .308 valve to…Read more

]]> c7a416eec624bc7965f84a8f9253e708 mistman replied to the topic lord altros Regulators??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/lord-altros-regulators-d42/page/2/#post-165847 Sat, 26 Jan 2013 13:41:00 -0400 Sorry for the late responses.
Have been travelling and in the process of setting up my website for Airforce Custom Spares.

quote knifemaker:What kind of tank are you using, that gives the right LOP?
Mike

Its a 400cc Tank like the one used in FX air rifles and you can fill it right upto 225bar which is what I like about it.

Post installation of…Read more

]]> 77719424b2bcee76fad1395343625951 mistman replied to the topic lord altros Regulators??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/lord-altros-regulators-d42/#post-164370 Thu, 27 Dec 2012 12:30:27 -0400 quote maw:Thanks Mistman.

Cheers πŸ™‚

]]> 706e52980a16ac9a1e28238745d2832e mistman replied to the topic lord altros Regulators??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/lord-altros-regulators-d42/#post-164366 Thu, 27 Dec 2012 08:35:36 -0400 I am gonna get the tank details for you. Am travelling and gonna be back after 2 weeks.
The best part is that after installation of the reg with the 400 cc tank (faint memories) the length equates the standard condor tank or maybe 1/2 inch more.
The LOP is just perfect.

πŸ˜€ yes I do get shotgun groups with the choked barrel.
Now I know the…Read more

]]> 2374464b872d934e5b65eb143b5add77 mistman replied to the topic lord altros Regulators??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/lord-altros-regulators-d42/#post-164360 Thu, 27 Dec 2012 06:09:37 -0400 The lower shot count would be because of my greed in power.
I set it to a little more than the max reccomended and found a sweet spot.
I could have gained more fps at a lower regulator setting if the barrel was 24″ in length.

My rig was with the 18 inches .25 barrel and 31gr kodiak so in order to get the max speed I might have overdone the…Read more

]]> 0b86772ae0d0f72ffc290426b4438fe3 mistman replied to the topic lord altros Regulators??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/lord-altros-regulators-d42/#post-164311 Wed, 26 Dec 2012 07:51:24 -0400 Okay Mike, here some first hand info.
I get 15 consistent shots with the reg maxed out.

I have the condor tuned, running an 18″ barrel in .25 cal
With the reg maxed out and a 31gr Kodiak the average spread between 15
shots were 5fps.
Max was 875 fps and min was 870 fps.

I wanted more power and so stretched the rig to its max. (150 bar)
Did have…Read more

]]> 2c27f47035878e2febf2c899dff1a9e2 mistman replied to the topic FX Royale with Ti Tube and new custom stock. Finally done!!! in the forum Mods/Machinists https://talonairgun.com/forums/topic/fx-royale-with-ti-tube-and-new-custom-stock-finally-done/#post-162717 Fri, 23 Nov 2012 17:20:02 -0400 quote tonaka:One thing for sure, I got no idea how people do this for living if you do it just by hand. It took so much time and effort for me just to make this one stock. I would never do it. My hat is off to those guys who custom make them.
These were the exact words that came to my mind when I made a custom stock.
It took me a month or so, I…Read more

]]> 037ff6eb4327bf35bf2ef6e2a5fc4cc2 mistman replied to the topic My Condor finally is a tack driver.. and the magic was... in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/my-condor-finally-is-a-tack-driver-and-the-magic-was/page/2/#post-162395 Fri, 16 Nov 2012 03:36:26 -0400 Yup have done that.
Have a trirail adapter, exactly above the power wheel on the dovetail rail.

Dont know if that brought in more accuracy.
I can shoot sub one inch groups with my regulated condor @ 100 yards….

]]> 73769ca3094ac53b9ff11300655a9ef9 mistman replied to the topic TalonP valve. in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/talonp-valve/#post-158986 Wed, 15 Aug 2012 12:12:49 -0400 Thats right.
The threads are different for the talonp valve and cannot be swapped directly with a condor/talon tank.

]]> e816c9198de76d9426816b37ea0891de mistman replied to the topic TalonP Adjustable stock in the forum Mods/Machinists https://talonairgun.com/forums/topic/talonp-adjustable-stock/#post-158644 Thu, 02 Aug 2012 16:25:02 -0400 As per my design, I had it that way.
Thin and at the same time enough thickness to retain strength.
Then I wanted to use the same Condor Tank Cover to slide over the Aluminium interconnect.
So I just used the OD of the Condor Tank.
If I had reduced the thickness, I would further have to get it anodized for the beauty black finish.
Got lazy and…Read more

]]> eca8304cc5eba35aba79582d695de08d mistman replied to the topic FX Royale 400 VRS FX Royale 500 Carbine in the forum Other Guns https://talonairgun.com/forums/topic/fx-royale-400-vrs-fx-royale-500-carbine/#post-157589 Sun, 24 Jun 2012 10:02:52 -0400 quote roachcreek:The 500 hits noticably harder on game inside of 100 yards, oddly enough past 150 yards, the 400 overtakes the 500 in FPE and shoots considerably flatter after 70 yards and bucks the wind much better.

The 400 is more accurate, especially at 150 yards, but that could be due to the trigger being much better on the 400, and the 18.1…Read more

]]> c1eecc8bb7a2949d9be853b288a05457 mistman replied to the topic what does the talon/p weigh? in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/what-does-the-talon-p-weigh/#post-155470 Mon, 14 May 2012 15:39:45 -0400 Yep Stock TalonP weighs 3.67lbs filled to 2800 PSI πŸ™‚

]]> 774d1008e9fcf6f321738fdb9b8d02d0 mistman replied to the topic talon ss tuning from Bulgaria in the forum Mods/Machinists https://talonairgun.com/forums/topic/talon-ss-tuning-from-bulgaria/#post-148429 Fri, 13 Jan 2012 15:23:24 -0400 quote Dr.Terziyski:and one question Do you know this man?He was in my klinic here in Bulgaria

Some cool grips and stock you have there, truly impressive.

It would have been an honor to meet the Stallone.

Dont think, I’ve ever missed any of his action movies.

]]> a5cd194ebc643a183d6d419478a653a1 mistman replied to the topic Modified Edgun stock in the forum EdGun https://talonairgun.com/forums/topic/modified-edgun-stock/#post-135547 Thu, 16 Jun 2011 19:46:17 -0400 Thanks for the confidence Hoot.

I do have the dremel 300, but am not sure of the right accessory to get the job done.

As I have only used the metal cutting and the metal grinding tool with the dremel.

I will run a search on you tube for videos and would try it out on a block of wood and then the Edgun Stock.

Will keep ya posted on how it goes…

]]> 418c2633a54020e5a53df948e3d7de1e mistman replied to the topic Modified Edgun stock in the forum EdGun https://talonairgun.com/forums/topic/modified-edgun-stock/#post-135541 Thu, 16 Jun 2011 17:53:39 -0400 Okay JFK, since you gonna cover me, am gonna try and redo the grip.

]]> 3ab9f64185a69143c2dae235baecd19b mistman replied to the topic Modified Edgun stock in the forum EdGun https://talonairgun.com/forums/topic/modified-edgun-stock/#post-135440 Tue, 14 Jun 2011 05:26:11 -0400 The only job I have ever done with wood is making a box for my shooting chrony, so that I can place table lights for indoor shooting.

That was pretty straight.

I did read through your reply many a times, but still dont have the dare.

You have 30 years of experience and I dont have 3 hours of it.

So I am gonna put that project on hold.

But…Read more

]]> e329f3442b178bc024e7093266e8a5e5 mistman replied to the topic Modified Edgun stock in the forum EdGun https://talonairgun.com/forums/topic/modified-edgun-stock/#post-135412 Mon, 13 Jun 2011 19:21:50 -0400 That is exactly what I ‘ve been thinking about, I never had the guts or would never dare to do anything to the matador stock.

Availabiliy / Shipping Charges / Blah..Blah Blah….. πŸ˜›

But your idea seems perfect, Did you carve a piece out and attached it to the stock.

OR

You’ve carved the existing stock ? 😯

Either ways superb job done……

]]> 61086d349a2b91602ff020477a31c537 mistman replied to the topic I lost my Edgun fill probe!!! in the forum EdGun https://talonairgun.com/forums/topic/i-lost-my-edgun-fill-probe/page/3/#post-135411 Mon, 13 Jun 2011 19:13:33 -0400 Truly appreciate that.

Since I didn’t get a reply, I went ahead and made one for myself.

Pictures of how they turned out.

However, now that you have pointed me out to the link I will be buying a set of those as backup. πŸ™‚

]]> 760c9179cd98d6261a8eb1cc92426c4d mistman replied to the topic I lost my Edgun fill probe!!! in the forum EdGun https://talonairgun.com/forums/topic/i-lost-my-edgun-fill-probe/page/3/#post-134992 Thu, 02 Jun 2011 14:12:21 -0400 quote serg:I bought this at lowes, works great,
find them in the hardware section, where they have the trays with bolts and odds and ends.

http://www.lowes.com/lowes/lkn?action=productDetail&productId=139461-37672-881277&lpage=none

Hey Serg.

I am unable to find the product you listed above.

Could you put up another link for reference so that…Read more

]]> 5fa9db2db6e10b6bdc33bc98caa38749 mistman replied to the topic My indoor chrono lighting solution. in the forum Mods/Machinists https://talonairgun.com/forums/topic/my-indoor-chrono-lighting-solution/#post-131576 Wed, 06 Apr 2011 12:13:08 -0400 quote powderburner:That’s really cool man, if you ever want to use it were you don’t have electricity , you could put 12 volt bulbs in it and run a cord to your car battery πŸ™‚

:thumb:

Or you could take it out under open sky and shoot to glory….during the day…
And if youve lost power to the house…you dont wanna use the chrony at that…Read more

]]> 64bd20c69fb838b992e8f45ed2ddf1a5 mistman replied to the topic test in the forum EdGun https://talonairgun.com/forums/topic/test-d82/#post-130703 Tue, 22 Mar 2011 19:07:22 -0400 Thanks Eddie and Grit for the responses…..
Okay lets say I would’t be offended about keeping the original color and going in for the dupicolor spatter paint.

http://www.duplicolor.com/products/trunkSpatter/

Will “dupicolor spatter paint” be more durable than fusuion paint ?

Lets say.. with careful usage of the weapon in the field, would it…Read more

]]> 6bd874a5ca53a436c0a99ce792d390e0 mistman replied to the topic test in the forum EdGun https://talonairgun.com/forums/topic/test-d82/#post-130520 Sun, 20 Mar 2011 17:13:19 -0400 Hey Eddie,

Could you give us an update on how well the Krylon Fusion has held.

I too am facing the same issue, posted by other members.

When the Matador is being kept away for like 2 weeks and taken out of its soft case the mat finish inside the case get embossed on the stock of the Matador.

Appreciate instructions to apply the Krylon Fusion…Read more

]]> d6e32be673e68f073bc310f44380bf04 mistman replied to the topic No more EDguns out of Russia :( in the forum EdGun https://talonairgun.com/forums/topic/no-more-edguns-out-of-russia/page/4/#post-128629 Mon, 21 Feb 2011 16:59:33 -0400 Regret to hear what is happening Ed.

Will definitely write letters in your favor.

The way I see it, it a new uprising.

The Outcome of which will be in your favor over the years to come.

Am sure those existing great brands might have been through hardships to get there too. Its just that you’re is worser.

It sad to hear that that you have to…Read more

]]> 83d28c104e6cf620783382034e422570 mistman replied to the topic EdgunUSA Youtube Channel is launched. in the forum EdGun https://talonairgun.com/forums/topic/edgunusa-youtube-channel-is-launched/page/14/#post-128423 Fri, 18 Feb 2011 07:43:23 -0400 Hey Ted,

The “Pigeon Hunting in High Wind ” video was just superb man. :8:

I like your minute observations. You truly have the eagles eyes…

Hope you didn’t just pop one of those eagles and do the transplant. :mrgreen:

Sincerely looking forward to you forth coming videos.

Had to download this one, just couldn’t resist, it was done that w…Read more

]]> bb8d6483b970b9423b35c99b18c6c3f7 mistman replied to the topic Foldable HW100 in the forum BullPup General Chat https://talonairgun.com/forums/topic/foldable-hw100/#post-127907 Tue, 08 Feb 2011 01:25:27 -0400 That looks like hell of an assault rife…..

Great job done by your friend…………

]]> 871c38897fa5575172ce5b9cd9b725af mistman replied to the topic A puff of air to the eye. in the forum EdGun https://talonairgun.com/forums/topic/a-puff-of-air-to-the-eye/page/3/#post-127110 Tue, 25 Jan 2011 19:28:30 -0400 quote oldgoat:Hi Mistman. I have a bunch of the 90 duro O rings in 3 mm X 1 mm X 5 mm. They work the best if you can find them. I found a US supplier but, the min order was 500.

If you can’t find the 90 duros, 75s will work a lot better than the stock ones. Jeff and I (Hi Jeff!, I thought you had gave up on us! πŸ˜† ) have tried a LOT of…Read more

]]> ab76224c36af98e2d59b41ef4b6b6d9d mistman replied to the topic A puff of air to the eye. in the forum EdGun https://talonairgun.com/forums/topic/a-puff-of-air-to-the-eye/page/3/#post-127108 Tue, 25 Jan 2011 19:27:36 -0400 quote oldgoat:Hi Mistman. I have a bunch of the 90 duro O rings in 3 mm X 1 mm X 5 mm. They work the best if you can find them. I found a US supplier but, the min order was 500.

If you can’t find the 90 duros, 75s will work a lot better than the stock ones. Jeff and I (Hi Jeff!, I thought you had gave up on us! πŸ˜† ) have tried a LOT of…Read more

]]> de5c492b0d5dd689ede5a866fe14fb84 mistman replied to the topic A puff of air to the eye. in the forum EdGun https://talonairgun.com/forums/topic/a-puff-of-air-to-the-eye/page/2/#post-127100 Tue, 25 Jan 2011 15:38:17 -0400 Thanks for the heads up Jeff…..You always helped me out…..
Its gonna be a gamble…lets see how long I can sustain with the current O-Rings…… πŸ™

I miss US when it comes to shipping and trying out new stuff . πŸ™‚
The cost vs satisfaction is very high getting things shipped to my place. πŸ™

]]> 864bd9649e322ce75e93c93d45e1fef9 mistman replied to the topic A puff of air to the eye. in the forum EdGun https://talonairgun.com/forums/topic/a-puff-of-air-to-the-eye/page/2/#post-127095 Tue, 25 Jan 2011 10:20:57 -0400 quote oldgoat:Hi Mistman. Yes, the right size is 3 mm ID X 1 mm cross section X 5 mm OD. If you order some, try to get 75 duro hardness, on the shore A scale, or harder.

The new, harder ones, will last a lot longer. They will still need changed every once in a while. They have to handle all of the pressure when the gun fires.

Appreciate the…Read more

]]> 35cd74822317ca5ea5257c388a7adc2d mistman replied to the topic A puff of air to the eye. in the forum EdGun https://talonairgun.com/forums/topic/a-puff-of-air-to-the-eye/page/2/#post-127093 Tue, 25 Jan 2011 08:58:57 -0400 quote mamcrackin:McMaster Carr

9263K511
METRIC VITON(R) FLUOROELASTOMER O-RING, 1 MM WIDTH, 3 MM ID

http://www.mcmaster.com/#9263k511/=92e3zq

I too was facing the issue with the “puff of air on my face”
Hope the ones mentioned above are the exact match for the pellet probe ?

Was about to place the order, didn’t wanna go wrong out there as t…Read more

]]> 1ee86f12ad0e5388f07785fbc44b2267 mistman replied to the topic Which Hawke scope to get in the forum Optics/Nightvision https://talonairgun.com/forums/topic/which-hawke-scope-to-get/#post-126606 Sat, 15 Jan 2011 08:31:22 -0400 I have the bushy 6400 series on my setup, don’t thing it going to be replaced any soon.

But I was shooting my friends royale the other day, were shooting at 107 yards and the groups were tight at 14x on the hawke tactical.

Somebody who owns one might chip in some more info so that you don’t end making the wrong choice.

One review I liked was :…Read more

]]> b3596119f01ecf79e3f431e81d82a99e mistman replied to the topic Which Hawke scope to get in the forum Optics/Nightvision https://talonairgun.com/forums/topic/which-hawke-scope-to-get/#post-126524 Thu, 13 Jan 2011 19:24:20 -0400 My Votes for the Hawke SideWinder 30 Tactical Series.

You got to love it with the 1/2 Mil Dot 20x.

Used them …just cant stop liking them for the price and reticles.

For the mounts if you are using a Tri Rail, then the medium mounts should suffice. Else I would say go for the high mounts.

]]> a302839e279bf3e08f3d4a8862bade6f mistman replied to the topic How Quiet is your Matador? in the forum EdGun https://talonairgun.com/forums/topic/how-quiet-is-your-matador/#post-126386 Tue, 11 Jan 2011 13:01:28 -0400 quote oldgoat:Every time I see the old biddy siting on her front porch, and the wind is blowing the right way, I start burning leaves in my burn pile. Before I start the fire, I call the local Fire Department and tell them that I am going to smoke the old bitch out and that they will be geting a call from her. They think that it is hilarious.…Read more

]]> 3d1c5a2e427303faa5252c1a7abded89 mistman replied to the topic Who has this??? in the forum Optics/Nightvision https://talonairgun.com/forums/topic/who-has-this/#post-125502 Tue, 28 Dec 2010 05:10:42 -0400 quote SAVAGESAM:Mistman is yours a side focus?

It is a Side Focus, goes down right upto 10 yards.

Just a note : I’ve had the Leapers in higher mag.
And the Bushnell at 8x would do what a lepers does at 16X.
Clarity is way higher in Bushnell. You get what you pay for.

Coming to the 100 yards groups we were trying with this scope.
We were…Read more

]]> 26e7df4c4421d78f1c4ec554598bbb8d mistman replied to the topic Who has this??? in the forum Optics/Nightvision https://talonairgun.com/forums/topic/who-has-this/#post-125452 Mon, 27 Dec 2010 18:32:30 -0400 I have this model and love it every bit.

http://www.shopbushnell.com/detail/BSN+652164MD

Don’t think I would ever be looking for more.

Not that there aren’t better optics.

Clarity is top notch, and the best part is the flexibility to get it down to 2.5 X

I wouldn’t say the plastic clicks are great but they do a good job, if you were to adjust…Read more

]]> 780405538420a496d1a16954f2a69ea3 mistman replied to the topic Veles should be fun in the forum EdGun https://talonairgun.com/forums/topic/veles-should-be-fun/#post-125228 Fri, 24 Dec 2010 14:29:08 -0400 Have got this mounted on the Veles.

http://www.bushnell.com/products/scopes/riflescopes/elite4200/421424M/

Trust me you wont regret it……Clarity and performance are top notch at a heavy price though πŸ™

I can consistently hit an egg at 50-60 yards….

Beyond that…the max I have shot with the veles is 65 yards ……..(Popped a Crow)

Oh…Read more

]]> 1d351eb3fe3a9c298d9b92296be3ce70 mistman replied to the topic I am afraid you underestimate EDgun Veles :) in the forum EdGun https://talonairgun.com/forums/topic/i-am-afraid-you-underestimate-edgun-veles/page/3/#post-123473 Mon, 29 Nov 2010 11:57:48 -0400 This one was a sparrow taken at 52 yards with the Veles .177, just in case anyone would doubt the accuracy….
This one is just the size of an egg, but i use a scope on it unlike Ed who uses the dot.

Forgive the Video…clarity…best I could do…..
As soon as the target was dropped a crow flew with it……so I dont have the latter of the…Read more

]]> fc88e3f7b239b6d75fed49663cbdcdcd mistman replied to the topic Edgun Spares -----------> No Response @ Two Months in the forum EdGun https://talonairgun.com/forums/topic/edgun-spares-gt-no-response-two-months/page/2/#post-121277 Tue, 26 Oct 2010 14:51:30 -0400 Hi Tony,

I never said I just ordered for O-Rings, Did I ?

I did mention spares, and you can even see the reply made on this topic on the earlier post, where Adam asked me what I was looking for.

I do not own a lathe and don’t think its worth, buying a lathe, learning and making those parts for myself to enjoy the hobby of airgunning.

Things…Read more

]]> c4d680d29cc399c4df9a5b1f339a9677 mistman replied to the topic Edgun Spares -----------> No Response @ Two Months in the forum EdGun https://talonairgun.com/forums/topic/edgun-spares-gt-no-response-two-months/#post-121267 Tue, 26 Oct 2010 05:49:46 -0400 I have Ed’s email id from his home page so I have written to him too.

I get a bounce back notification when I write to Ed’s email from my personal id, and that is when I use the feedback section on his home page and I know for sure he gets my responses through his home page.

Its not just Edgun products……

I have 2 of the Airforce airguns and…Read more

]]> 137f4416d02326e35084365fc7841daa mistman replied to the topic Edgun Spares -----------> No Response @ Two Months in the forum EdGun https://talonairgun.com/forums/topic/edgun-spares-gt-no-response-two-months/#post-121212 Mon, 25 Oct 2010 14:02:06 -0400 All am asking Ed ….. is for the dates…..
Agree it could take a while before he could arrange them, but I would
expect a prompt reply on the delivery front.

I have been writing mails every week since…..

What good is it, if you buy a product and cannot buy spares?

Hope you agree that this is a fairly expensive air rifle.

I am not debating…Read more

]]> 7573c02642216ea7265c756645c4edf2 mistman replied to the topic Edgun Spares -----------> No Response @ Two Months in the forum EdGun https://talonairgun.com/forums/topic/edgun-spares-gt-no-response-two-months/#post-119994 Mon, 04 Oct 2010 13:41:03 -0400 Couple of them Adam.
The Springs and some other wear and tear parts….
Cant explain all, the manual is in Russian Language…
However I have circled my requirement from the pictures in video, and sent them….

]]> 0f5f21f3fdc22432d08d2096dee1e127 mistman replied to the topic Edgun Spares -----------> No Response @ Two Months in the forum EdGun https://talonairgun.com/forums/topic/edgun-spares-gt-no-response-two-months/#post-119967 Mon, 04 Oct 2010 04:21:55 -0400 Yes Thats Correct, I want to buy spares for my Edgun.

I understand that it may take time for production, but I expect the manufacturer to reply with wait time and cost for the items I had requested.

This has been one of my most expensive purchase and I expect the service also to be at par.

I have sent more than 20 e-mails by now and still don’t…Read more

]]> 96fed62b3ba156497412b27c0dd64027 mistman replied to the topic Suggestions for a Hand drill Press in the forum Mods/Machinists https://talonairgun.com/forums/topic/suggestions-for-a-hand-drill-press/page/2/#post-109517 Mon, 31 May 2010 15:34:58 -0400 You just made my Day Buddy!!! πŸ˜€
Thanks a Ton ….got to get going…..

]]> fbbba32b11d5a7aa065d3e52a7aa4a3d mistman replied to the topic Suggestions for a Hand drill Press in the forum Mods/Machinists https://talonairgun.com/forums/topic/suggestions-for-a-hand-drill-press/page/2/#post-109464 Mon, 31 May 2010 01:27:20 -0400 Thanks Shadow for the input……

Now thats exactly, what I am looking for …….

Some more options Please…..as they do not ship to India.

]]> 6223e5e2dd0001acfacca2dbc9ddf5a6 mistman replied to the topic Suggestions for a Hand drill Press in the forum Mods/Machinists https://talonairgun.com/forums/topic/suggestions-for-a-hand-drill-press/#post-109421 Sun, 30 May 2010 15:04:18 -0400 But I would like to ask again….Has anyone out here used the Dremel Bench Drill Press….
http://www.dremel.com/en-us/AttachmentsAndAccessories/Pages/AttachmentsDetail.aspx?pid=220-01
I ‘have read only negative reviews …Prove me wrong….

]]> 990b28b4829bd74d743b3441525573ca mistman replied to the topic Suggestions for a Hand drill Press in the forum Mods/Machinists https://talonairgun.com/forums/topic/suggestions-for-a-hand-drill-press/#post-109420 Sun, 30 May 2010 15:01:38 -0400 quote Spartan:quote Mistman:I found the one I saw at your home in my Hardware store…..Wanted a higher end model for doing precision work…

Cheers !!!

Did you find my work to be imperfect or out of tolerence for any reason? Please let me know so that I can rectify my mistakes. What exact precision work you intend to carry out beside enlarging…Read more

]]> 2e0886beb89191a180bf8b570fbadd47 mistman replied to the topic Suggestions for a Hand drill Press in the forum Mods/Machinists https://talonairgun.com/forums/topic/suggestions-for-a-hand-drill-press/#post-109030 Wed, 26 May 2010 15:50:43 -0400 I found the one I saw at your home in my Hardware store…..Wanted a higher end model for doing precision work…

Cheers !!!

]]>