Talonairgun | motorhead | Activity https://talonairgunforum.com/members/motorhead/activity/ Activity feed for motorhead. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 2e195e10290d7ec79838857a1dd35ba6 motorhead replied to the topic Advice on β€œping” noise when fired in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/advice-on-ping-noise-when-fired/#post-535388 Tue, 10 Nov 2020 17:42:17 -0400 As an experienced tuner … also owning a .22 mutant and .177 veteran THEY DO INDEED PING loudly from the steel hammer to steel poppet stem collision.

Just a few days ago did a modification to my VET addressing this. As too PING … Removed the hammer and using a CARBIDE spot drill placed a small @ 150″ deep hole. Then ran in a 3/16″ 2 flute c…Read more

]]> a8a98bbf3e8f41cfcdec18dfc31c7bf0 motorhead replied to the topic Needing a little more power in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/needing-a-little-more-power/page/2/#post-530990 Tue, 03 Dec 2019 05:57:15 -0400 More power … read these

New member … Fooling around with Mutants

Balancing the flow within the Mutant valve

]]> 1f941b589cc43111eaa8b683baa74406 motorhead changed their profile picture https://talonairgunforum.com/activity/p/158921/ Thu, 15 Aug 2019 04:30:23 -0400 0 108a0d69aabf248752f644fa314bb19c motorhead replied to the topic WTF is going on??? in the forum Off Topic https://talonairgun.com/forums/topic/wtf-is-going-on/#post-436362 Thu, 15 Aug 2019 04:25:36 -0400 Seems new host required a new site … content of the old obviously transferred.
Just my WAG on said Q

]]> 66f573ba7776647cc19f80d538fe4d5b motorhead replied to the topic ( Cobra mod ) Whats that ? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/cobra-mod-whats-that/#post-276148 Thu, 06 Sep 2018 23:13:07 -0400 had placed the cross forum link in the post … but here it is again https://www.gatewaytoairguns.org/GTA/index.php?topic=139401.msg1402661#msg1402661

The implementing of the air spring tech “Cobra” requires manufacturing some custom parts including poppet valve.
There are NO drop in parts for this … all custom.

YES to this mod being adaptable…Read more

]]> 1c5ddbb4a8808bbfb640a372f555b972 motorhead replied to the topic Quietest Rifle Yet.. in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/quietest-rifle-yet/#post-276147 Thu, 06 Sep 2018 20:25:49 -0400 Sorry for the cross forum link … but ” most” all anyone would want to know is within this thread.
See: https://www.gatewaytoairguns.org/GTA/index.php?topic=139401.msg1402661#msg1402661

]]> d550b260b4057466793710baf9db9232 motorhead replied to the topic Taipan mutant in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-d81/page/3/#post-276142 Thu, 06 Sep 2018 05:15:22 -0400 makes no sense … with the small 2mm cinch screw loose on receivers rear left side the Brass HST adjuster should screw right out … THAT IS ?
Unless the hammer is seized into it. If thats the case you will need to remove trigger areas cover plate, pop off the spring holding the reset link and remove the link. This will allow the hammer to be…Read more

]]> 080109c16955a651bb6005febad5cf5a motorhead replied to the topic Quietest Rifle Yet.. in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/quietest-rifle-yet/#post-276141 Thu, 06 Sep 2018 05:08:38 -0400 Yup … have a tuned Mutant which utilizes an air spring to help close the poppet ( Cobra mod ) that has the shot report crazy quiet due to a very short dwell cycle. Add an LDC it’s stupid quiet.

Sadly gun quiet only is good for ones ego of such things … the SMACK of a struck target sorta cancels that right out !

]]> 1f0a3900d397679e70dc3afedbbbd7ad motorhead replied to the topic Taipan mutant in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-d81/page/3/#post-275895 Mon, 06 Aug 2018 15:06:24 -0400 I would check the rear velocity adjuster … unscrew it and make sure the hammer ( rear of it ) can freely slide in & out of the adjusters guide hole.
If the hammer had wedged itself / seized into the adjuster cap ? there is whats holding it from firing.

]]> 8d7e6ae895579b0c63a365a68f2ba6cc motorhead replied to the topic Question 4 Veteran owner's...... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/question-4-veteran-owner-s/page/2/#post-273898 Thu, 18 Jan 2018 18:00:43 -0400 Cover off … easy
Kinetic energy is your friend …. loosen the cover screws a few turns each but don’t remove … using a plastic face or leather mallet strike the side of receiver ( same side as cover ) and the ensuing energy will have the triggers internals bouncing up against the cover and it will come loose.
Now remove screws all the way and…Read more

]]> c01d07b076c7375e90c3ab0d8a021eb9 motorhead replied to the topic SS screws for 22 Mutant in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/ss-screws-for-22-mutant/#post-273765 Tue, 09 Jan 2018 06:09:42 -0400 SS screws in aluminum and some sort of corrosion …. Your smoking some bad weed !!
better tell the Marine industry and all those that build outboard motors used in salt water or fresh that there stainless fasteners are wrong … laughable :rofl:

]]> a596e41a656127e9b5421ad05f7cac02 motorhead replied to the topic Transfer port in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/transfer-port/#post-272321 Wed, 08 Nov 2017 05:15:17 -0400 Hell … i just want to see what one looks like ?

]]> d992f4c27bd97a856cd2db43196c55d8 motorhead replied to the topic Huma reg in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/huma-reg/#post-271863 Wed, 18 Oct 2017 16:18:53 -0400 “per-say” …. Fitting one reg for another will gain you nothing or cost you .. unless one of them has tighter set point stability and lacks creep.
The Tiapan regulators have been in my experience VERY stable & not in need of something else fitted in there place.

Now if one shoots a lot and service parts for said OEM reg is troublesome ? then…Read more

]]> b3cb50cd1bde46bbf79340ccdaa8f281 motorhead replied to the topic Veteran 25 cal valve port tuning in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/veteran-25-cal-valve-port-tuning/#post-271611 Thu, 05 Oct 2017 15:26:51 -0400 Pretty standard stuff there being a common modification to make on most any conventional poppet valve.
While flow is increased along with potential of making more power ( Given Reg pressure & plenum volume is enough ) the gains made are easily dialed back by decreasing HST to desired level.
IMO a mod to do with no worries what so ever of needed to…Read more

]]> 88d589efa49f5a0c7813b0e88de6f026 motorhead replied to the topic Regulator / Air tube size inquire ????? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/regulator-air-tube-size-inquire/#post-271428 Sun, 24 Sep 2017 22:03:10 -0400 PHYSICAL air tube size is whats being asked for … NOT CC capacity or barrels :suprisedn:

]]> 7a31b8ac9bac04107cea8a91a5b1047e motorhead replied to the topic Regulator / Air tube size inquire ????? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/regulator-air-tube-size-inquire/#post-271394 Fri, 22 Sep 2017 15:15:38 -0400 O.D. will certainly help in knowing if there air tubes differ … so YES, please measure.

Scott

]]> b8ea0322d084dc2920a0e7a7d9697f98 motorhead replied to the topic What's up w/Americanairarms? in the forum BullPup General Chat https://talonairgun.com/forums/topic/what-s-up-w-americanairarms/#post-269098 Sat, 13 May 2017 05:26:56 -0400 E-mail is a wasteland …. want matter of fact contact ? Pick a damn phone and call :8:

]]> 5b42f3414613e8d385458acbf037ad10 motorhead replied to the topic So the new Mutant .25 will be ready april 1st in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/so-the-new-mutant-25-will-be-ready-april-1st/page/2/#post-267702 Thu, 23 Mar 2017 18:48:54 -0400 Just read a post over on the YELLOW that R&L has the new guns IN STOCK !! the .25 cal too :biggrinn:

]]> 7bba45af010df7df64aa488eb8f4cc51 motorhead replied to the topic Mutant Shorty Bipod in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-bipod/#post-266430 Sun, 19 Feb 2017 00:43:43 -0400 I have a UTG Recon 360 for mine when the need arises

]]> 4961806c6821c3c70074c690080d240d motorhead replied to the topic Hello from the wayback machine - Kral Question in the forum BullPup General Chat https://talonairgun.com/forums/topic/hello-from-the-wayback-machine-kral-question/#post-266337 Thu, 16 Feb 2017 06:27:36 -0400 Yup ….

O-rings cross section diameter & Internal diameter required. Easy peezy

]]> 928161de5770dca0b5370e0f0a06bbff motorhead replied to the topic Bullpup Picture Thread in the forum BullPup General Chat https://talonairgun.com/forums/topic/bullpup-picture-thread/page/3/#post-265657 Wed, 01 Feb 2017 01:56:38 -0400 My Mutant Standard …

My custom built Pup stock with a .22 marauder action …

My GniB Conversion stock with an AA 410 carbine FAC action …

]]> 975219c2eccb252377cc3dd29b8434e8 motorhead replied to the topic Kral bullpup only 5hundo in the forum BullPup General Chat https://talonairgun.com/forums/topic/kral-bullpup-only-5hundo/#post-265411 Fri, 27 Jan 2017 22:23:37 -0400 DIFFERENT versions of the gun !!

Original had plastic scope towers and barrel position was on top of tube …

Current version has a different receiver placing barrel above air tube with enough gap to shroud it … Also scope towers now aluminum.

So … Picture may very well indeed be accurate :whistle:

]]> 837ce9c2b37b2f9506d4fbe4563c8408 motorhead replied to the topic mutant or warp ? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-or-warp/#post-265078 Fri, 20 Jan 2017 22:34:22 -0400 Own BOTH …. Given equal caliber and power setting the MUTANT gets my vote !!

]]> 41fc305a7a652963127674fd1fdc2351 motorhead replied to the topic Warp Vs Flex? in the forum Other BullPups https://talonairgun.com/forums/topic/warp-vs-flex/#post-264968 Wed, 18 Jan 2017 16:34:13 -0400 Own a WarP being the First one ever produced for Field Target work in .177 caliber :biggrinn:
Out side of the overall length / main tube length and the internal plenum volume … there basic mechanical platforms are identical.
Bottle regulator or not, type bottle fitted your choice. Due to the plenum volume of the WarP, caliber and realistic…Read more

]]> f1c7066e4b5b83009b582bf862d7ac61 motorhead replied to the topic KRAL Puncher Bullpup .... Wow not too bad ! in the forum BullPup General Chat https://talonairgun.com/forums/topic/kral-puncher-bullpup-wow-not-too-bad/#post-264780 Sun, 15 Jan 2017 05:18:08 -0400 ALL PCPs bark W/O any sort of LDC fitted …..

]]> 71580845771114dd9646e705b929374b motorhead replied to the topic KRAL Puncher Bullpup .... Wow not too bad ! in the forum BullPup General Chat https://talonairgun.com/forums/topic/kral-puncher-bullpup-wow-not-too-bad/#post-264685 Thu, 12 Jan 2017 20:15:02 -0400 Well … thats what is soooo interesting …. All the WEB pictures show the barrel right on top of air tube.
My buddies picture of HIS ACTUAL GUN has differing scope towers and barrel is higher above air tube as well :suprisedn:

He also told me his gun has updated Magazines stating there VERY Marauder like πŸ˜‰

]]> a6f9b1499e7aa62928eed4c38eaedf3a motorhead replied to the topic Mutant Shorty air capacity question in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-air-capacity-question/#post-262947 Sat, 10 Dec 2016 18:50:28 -0400 136 for the shorty … 200 on the standard is what i read on past posts stated by the manufacturer.

Those who have crunched the numbers tho say it is closer to 168/170 cc :whistle:

]]> 7fd988bde0b4b3b5e3cccb4dcaed3dd1 motorhead replied to the topic Mutant hst & shroud pins in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-hst-amp-shroud-pins/#post-262439 Fri, 02 Dec 2016 23:46:30 -0400 Why not contact Tony at Talon tunes or the guys at Wild West and simply inquire about some ?

]]> 4e3f6c9f08e4126f0324fc7498c2f4b1 motorhead replied to the topic new mutant in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-mutant-d91/#post-262437 Fri, 02 Dec 2016 23:20:13 -0400 My standard has a few internal tweaks done, so my efficiency is a bit above average.
That said … on a 250 bar fill with JSB 15.9’s at @ 900 fps can make 60 shots on 95 bar ( 155 left ) and get a 6th mag making 72 shots to just under regs set pressure of 145 bar … yet still shot a 7th mag with little if any POI change at @ 40 yards.
Done it now…Read more

]]> ddcd6f88492b705274c95951fd47c9ee motorhead replied to the topic New member ... Fooling around with Mutants in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-member-fooling-around-with-mutants/page/2/#post-261898 Wed, 23 Nov 2016 06:06:06 -0400 More tuning data & work … an FYI cross posting link: http://talonairgun.com/forum/viewtopic.php?f=55&t=35766

]]> 622d25a85fc665b3712c9f304ae373ae motorhead replied to the topic Balancing the flow within the Mutant valve in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/balancing-the-flow-within-the-mutant-valve/page/2/#post-261894 Wed, 23 Nov 2016 05:41:45 -0400 Not to forget the last modifications were to simply change out the plenum spacer for one having more volume ( gained by thinner wall and a tad more length )

The volume of regulated air within plenum is the ONLY thing changed here other than hammer spring adjustment to find out what gains were made doing so.

So … HOW MUCH POWER did it make…Read more

]]> 9a62b4c7ea85d66a9470c93220e8ede7 motorhead replied to the topic Newbie to Board and Mutant Short Owner - 1st take and question in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/newbie-to-board-and-mutant-short-owner-1st-take-and-question/#post-260792 Sun, 06 Nov 2016 04:19:32 -0400 My Standard that came from WAG @ 4 months ago had not a mirage or color imperfection on it.
Ano aluminum was a satin black and very even, Air tube & barrel flawless and very even colored as well.

]]> 79f151a507ccc5d02d6303d25e7e64b2 motorhead replied to the topic LDC comparison in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/ldc-comparison/#post-260148 Sat, 22 Oct 2016 21:57:47 -0400 We in the state of California where the firearm Silen**** is illegal and having them on air weapons is accepted tho still sorta grey :whistle: …. disclosure & showing or talking about them comes at risk of persecution, we can’t / don’t disclose much.

Will say this … those LDC’s which utilize multi chambers & partition baffles to attenuate…Read more

]]> 4d9094a96959ab1d32ba61feb6b35ba9 motorhead replied to the topic LDC comparison in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/ldc-comparison/#post-260120 Fri, 21 Oct 2016 19:48:39 -0400 Tak,
Talk with me Sunday ( If your shooting ?) & will share a few LDC tricks that you could apply w/o adding a supplemental LDC to the end of your factory shroud :biggrinn:

]]> 1f0bfb3d9483328e4b7b83b933e1fbb4 motorhead replied to the topic Balancing the flow within the Mutant valve in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/balancing-the-flow-within-the-mutant-valve/page/2/#post-259999 Wed, 19 Oct 2016 04:09:00 -0400 quote darryl:quote Motorhead:Measured a fully seated JSB 15.9 finding skirt seated @ + .035″ ahead of the transfer hole. * BTW the 18.1’s having a shallower skirt cavity get seated deeper yet !
So went ahead and opened the barrel transfer hole to @ .195″ on an @ 10* angle just shy of bore contact followed up with a .125″ carbide burr elongating…Read more

]]> 2b2a909a6b488fdc4f84940aca057fb7 motorhead replied to the topic Balancing the flow within the Mutant valve in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/balancing-the-flow-within-the-mutant-valve/page/2/#post-259859 Sun, 16 Oct 2016 03:52:57 -0400 Measured a fully seated JSB 15.9 finding skirt seated @ + .035″ ahead of the transfer hole. * BTW the 18.1’s having a shallower skirt cavity get seated deeper yet !
So went ahead and opened the barrel transfer hole to @ .195″ on an @ 10* angle just shy of bore contact followed up with a .125″ carbide burr elongating the hole forward @ .025″ at the…Read more

]]> 88c4b1e52a2284f42d87a72b75116041 motorhead replied to the topic What the heck?!? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/what-the-heck/#post-259837 Sat, 15 Oct 2016 23:50:34 -0400 Lol … yup how it works in the modern age of air guns

]]> 3e0ea063d50d2cb224bdcb52a181ddb4 motorhead replied to the topic Balancing the flow within the Mutant valve in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/balancing-the-flow-within-the-mutant-valve/page/2/#post-259752 Thu, 13 Oct 2016 20:21:51 -0400 quote dman1114:Scott… what gains did you notice from your valve mods??

Only had less than a week of shooting it sense & maybe @ 200 pellets down range to get a feel for changes so far.

A few things I have noticed ….
Valve dwell is shorter now and took adding just a tad more ( @ 1/8 turn ) spring pre-load to get back power to where…Read more

]]> fadf93f591fc8baa640cb334286a66b6 motorhead replied to the topic Balancing the flow within the Mutant valve in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/balancing-the-flow-within-the-mutant-valve/#post-259715 Thu, 13 Oct 2016 03:57:52 -0400 quote endothelium:It is 4.45mm (or 4.50mm) x 5.0mm elliptical TP hole. Because the hole is slanted, the exact dimension is difficult to measure.

Darryl, the air leak might disappear after a few shots. If not, give it a little grease on the wall and push the barrel into the breech a bit harder and “lock” the barrel with the set screw before…Read more

]]> 0379fc21d6a2e8ca46c530496a544d07 motorhead replied to the topic Balancing the flow within the Mutant valve in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/balancing-the-flow-within-the-mutant-valve/#post-259709 Thu, 13 Oct 2016 00:24:12 -0400 quote darryl:Hello Endo,
I took a few pictures of my barrel. Unfortunately I have to recharge the batteries so they will be strong enough to transfer the pictures to my PC for uploading. I looked at the barrel port in the link you posted. The port on mine looks similar, but I found the edges inside the barrel to be lightly burred, which I cleaned…Read more

]]> e5a45322d4928e7235f2e90d0e5e5f95 motorhead replied to the topic Balancing the flow within the Mutant valve in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/balancing-the-flow-within-the-mutant-valve/#post-259551 Mon, 10 Oct 2016 04:52:12 -0400 quote LarryW22:Very interesting Scott, What are your expectations with an increase of .0003″ of area?
Regards
LarryW πŸ˜‰

That area gain is nothing and in choosing size of .235 was as close as i could get to TP’s area with reamers I had on hand.
Bigger won’t gain you a thing and slightly smaller … say .220″ /.225″ likely be better yet and…Read more

]]> 4abf098333f05fde19a9e751807fec08 motorhead replied to the topic Balancing the flow within the Mutant valve in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/balancing-the-flow-within-the-mutant-valve/#post-259550 Mon, 10 Oct 2016 04:22:48 -0400 Forgot … The barrel port.

It upon measuring was drilled at .170″ being .030″ smaller in diameter than the entirety of transfer passage.
* Sadly a .170″ TP in a .22 caliber barrel is already at the limit IMO in not having a pellet tilt and try to snag the holes edge as it passes by upon loading.

If one were to try and get equal area of the port…Read more

]]> a40f7d9261ac8e1c60b29988e7a4f514 motorhead replied to the topic New member ... Fooling around with Mutants in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-member-fooling-around-with-mutants/#post-259514 Sun, 09 Oct 2016 04:04:31 -0400 Carried in a 30″ UTG “Alpha Battle Carrier” bag fitting snugly within it :winkn:

]]> 3dc1f172dd26bda0101c1c6a00f63069 motorhead replied to the topic Field or general carry packs in the forum BullPup General Chat https://talonairgun.com/forums/topic/field-or-general-carry-packs/#post-259513 Sun, 09 Oct 2016 04:00:26 -0400 Am using a 30″ UTG “Alpha Battle Carrier” with the Mutant standard.

The UTG ABC is a single shoulder strap design with a hip strap allowing left or right carry w/o it flipping around.
Outside front has 3 zipper pouches. * Carries pellets, UTG bi-pod & LDC using hardly any of the available space.

]]> 6eae38b30dc7d43859a41844e2ac988f motorhead replied to the topic LDC options in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/ldc-options/#post-259503 Sat, 08 Oct 2016 20:31:42 -0400 My standard is Damn quiet tuned at @30 ft lbs and being just under 30″ OAL fits the UTG carry case like a glove.
Having an extra LDC gives the option of SUPER STEALTHY silence if situation warrants it without having to deal with added length all the time if a longer one piece were fitted.

]]> 2a923ab17861898197fc90cbbd9c1f72 motorhead replied to the topic New member ... Fooling around with Mutants in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-member-fooling-around-with-mutants/#post-259492 Sat, 08 Oct 2016 18:39:22 -0400 quote Cricket:How did you get all the screw sizes? Or did you just measure the length and order standard screws? My scope rings have Titanium screws and it is the nicest thing ever. Was thinking of switching out all my Cricket screws for Titanium ones but feels like a hassle

Took one of each to a hardware store that stocks loose SS fasteners and…Read more

]]> 1b4718dd3e921073598e00d11cee9f6d motorhead replied to the topic New member ... Fooling around with Mutants in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-member-fooling-around-with-mutants/#post-259490 Sat, 08 Oct 2016 18:06:48 -0400 Another snippet on changes made for cosmetics was the replacement of ALL the external black iron screws with Stainless screws. This included the scope tower clamps, rear receiver cover & forward stock retention position.

Also added to keep the COLD metal off your cheek was to use VELCRO ( Fuzzy side ) on top and on sides of rear receiver with a…Read more

]]> 4e400e3c08c4ce9b252421b191c6baa2 motorhead replied to the topic Thanks Donny,fatboy Mutant in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/thanks-donny-fatboy-mutant/#post-259489 Sat, 08 Oct 2016 17:25:04 -0400 Fatboys right ! …. that’s one oversize LDC to be sure

]]> aa3233dda6c8b2ab59ac3f25fc105174 motorhead replied to the topic New member ... Fooling around with Mutants in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-member-fooling-around-with-mutants/#post-259471 Sat, 08 Oct 2016 05:41:59 -0400 Last contribution to this thread is ….. So hows accuracy in general ?
Set to standard settings it pretty much is self explanatory … :8:

]]> 42d16feea591adeee2d646975c1a6804 motorhead replied to the topic New member ... Fooling around with Mutants in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-member-fooling-around-with-mutants/#post-259470 Sat, 08 Oct 2016 04:50:11 -0400 After a few PM’s … what the MAG carrier is size wise attached to the Scope brackets.

It attaches with 3/4″ velcro onto the vertical side of scope brackets and weights minus mags and pellet less than 2 ounces.

]]>