Talonairgun | Sam | Activity

Sam started the topic Can't cock Talon SS in the forum Talon/Talon SS

Tue, 08 Dec 2020 03:12:35 -0400

Hi all. I took apart the Talon today to put in a new hammer spring. Once reassembled, I wasn’t able to cock the gun. I can get the breach halfway forward, but it wont go any further. I’ve disassembled and reassembled it about 5 times now, but can’t seem to find the issue. I’ve tried using the old spring, but no luck. Ive trying forcing the breech…Read more

Sam replied to the topic Talon shooting weak? in the forum Talon/Talon SS

Mon, 30 Nov 2020 01:51:48 -0400

Edit: Turns out the old oring (plastic piece) was stick to the lip of the tank, where the brass piece meets the tank. I removed that and managed to get the brass piece to sit almost flush with the new oring (sticks up a tiny bit, but near flush). Problem is, the gun is still shooting weak. What exactly is the optimal fill pressure for these? The…Read more

Sam replied to the topic Talon shooting weak? in the forum Talon/Talon SS

Sun, 29 Nov 2020 21:31:38 -0400

I’m almost certain I removed it. I just took apart the valve again. Poked around the bottom of the brass piece with a metal pick, but I’m only hitting brass (I actually scratched the brass a bit to make sure there wasn’t a ring there). When tightened with the oring, the brass ring sits about 1mm above the lip of the tank.

Sam started the topic Talon shooting weak? in the forum Talon/Talon SS

Sat, 28 Nov 2020 02:16:17 -0400

Hi everyone! Picked up a Talon SS recently and I’m having some trouble with it. Initially, the tank was leaking. I fixed that by removing the brass piece and tossing in a size 14 oring. This stopped the leak, but now the brass piece doesn’t sit flush with the tank body (no matter how hard I tighten it). I’ve adjusted the tophat as per AF’s…Read more

Sam became a registered member

Sat, 28 Nov 2020 02:11:10 -0400