Talonairgun | naser404 | Activity https://talonairgunforum.com/members/naser404/activity/ Activity feed for naser404. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 fc438f777461ab06235ba7ffbb6c5c8c naser404 replied to the topic bedding my R3 22 cal in the forum EdGun https://talonairgun.com/forums/topic/bedding-my-r3-22-cal/#post-189711 Sat, 04 Jan 2014 17:27:22 -0400 Another solution is to make a spacer.

Here one I designed in SW and 3D printed it for my matador, now I never have an issue or POI shift. This was an older design, now I made a better revision, but don’t have any pics.

If anyone wants they can go to shapeways.com and print my spacer in any material they want.

Mine was made for 1mm, some may be…Read more

]]> be6a6cc664471682ead78547726f36c2 naser404 replied to the topic 90 Shot String from R3 .22 Standard - 200 Bar Fill =) in the forum EdGun https://talonairgun.com/forums/topic/90-shot-string-from-r3-22-standard-200-bar-fill/page/2/#post-189710 Sat, 04 Jan 2014 17:20:26 -0400 As I can see from your string that if you set your reg to 105Bar than you can get 880fps, and probably a 100 shots easy.

Add the total FPS of the first 80 shots than divide that total by say 880 & see how many shots it gives, than set it to that speed.

Just a suggestion.

]]> fe18270ec7b21b9fc3ed7fcb40358e9d naser404 replied to the topic Smooth Twist barrels on Edgun Matadors in the forum EdGun https://talonairgun.com/forums/topic/smooth-twist-barrels-on-edgun-matadors/page/2/#post-188769 Fri, 27 Dec 2013 12:04:22 -0400 BSA hammer forged barrels are top barrels too, OG has one of these and he can tell you more about them, but I’m not sure where to get these from, also I am not sure of their quality after they were acquired by Gammo.

But BSAa are amazing barrels.

]]> e4d56b3d6d13fe9d820d2631dbc4f736 naser404 replied to the topic Smooth Twist barrels on Edgun Matadors in the forum EdGun https://talonairgun.com/forums/topic/smooth-twist-barrels-on-edgun-matadors/page/2/#post-188679 Thu, 26 Dec 2013 16:55:54 -0400 Here are two groups with the FX Boss at 50y, using both pellet weights, FX branded & the heavier Daystate which are 50+ grains.

]]> 5b28420e5209fab94763abb02dddb852 naser404 replied to the topic Smooth Twist barrels on Edgun Matadors in the forum EdGun https://talonairgun.com/forums/topic/smooth-twist-barrels-on-edgun-matadors/page/2/#post-188676 Thu, 26 Dec 2013 16:42:47 -0400 OG is right, he sent me a ST barrel long time back when they 1st released them & after lots of testing we came to the conclusion that they are just not as good an the original R2.5 barrels.

Now we have the R3 with even better barrels but the ST barrels also improved & I have the FX Boss with the latest ST barrel & it’s very very accurate, does…Read more

]]> 834f3ce448e7700dbc698b8389dea7d3 naser404 replied to the topic Evanix MAX Bullpup in the forum Other BullPups https://talonairgun.com/forums/topic/evanix-max-bullpup/page/2/#post-180510 Sat, 28 Sep 2013 17:42:58 -0400 quote RONIN001:Sad news… LCD was to long so I could not thread it on and of course that means I cant use/test it at this time! 🙁

What do you mean by too long ? The threads ? Can you attach pictures ?

]]> 178d6bc7c1ccacecdaaa87ce0d200692 naser404 replied to the topic Evanix MAX Bullpup in the forum Other BullPups https://talonairgun.com/forums/topic/evanix-max-bullpup/page/2/#post-180498 Sat, 28 Sep 2013 01:37:26 -0400 here is what I have designed & made for my Max, its very short & very effective too.


]]> 8505283b2003e11eeb14c0c6d7d04052 naser404 replied to the topic FT Scope For 30 Cal Cricket - The Search Begins in the forum Kalibrgun https://talonairgun.com/forums/topic/ft-scope-for-30-cal-cricket-the-search-begins/page/4/#post-180432 Thu, 26 Sep 2013 23:09:40 -0400 That same 32x NF cost $3000 here and as you said it’s not clear and I didn’t like the reticle it had. I have seen that video of the March 80x but I’m not sure how clear it is in reality especially at 80x, many people don’t care much about high mag scopes but I just love them and too used to it.

I’m also considering FFP scopes and there is only…Read more

]]> ddf426747e8453535deab737ffc68c9a naser404 replied to the topic FT Scope For 30 Cal Cricket - The Search Begins in the forum Kalibrgun https://talonairgun.com/forums/topic/ft-scope-for-30-cal-cricket-the-search-begins/page/4/#post-180427 Thu, 26 Sep 2013 22:11:45 -0400 Today I went to buy a Night Force 5-25 scope with 34mm tube, I loved the reticle & the clarity but unfortunately the shop was asking for 18,000 dhs for it which is $4890 and this same scope sells for $2300 in the U.S that how much of a ripoff it is here, in fact I loved it so much I even offered him to pay $3000 but they refused.

So I still have…Read more

]]> 863eb10d350ef892c22873c57d4a089c naser404 replied to the topic Question in the forum Mods/Machinists https://talonairgun.com/forums/topic/question-d77/#post-180306 Tue, 24 Sep 2013 20:52:31 -0400 Its different for each model, example Matador Long, standard or short, I have long & standard & will check later for you brother.

]]> 8a46ac5b8007ebc6ac505c333d0b833a naser404 replied to the topic Edgun R3 Valve vs. newer R3.x valve? in the forum EdGun https://talonairgun.com/forums/topic/edgun-r3-valve-vs-newer-r3-x-valve/#post-180052 Thu, 19 Sep 2013 22:10:22 -0400 I can tell you how Ed got that extra 10-15% efficiency with the R3 vs the R2.5 but maybe I shouldn’t :p

]]> d5ba9ad1770c081baca0724aa4591df3 naser404 replied to the topic .30 Cricket at 89 FPE L@@K shot string in the forum Kalibrgun https://talonairgun.com/forums/topic/30-cricket-at-89-fpe-l-k-shot-string/page/2/#post-179400 Sun, 08 Sep 2013 15:24:02 -0400 quote SECoda:I find Ed’s comment about the 30 cal pellets making the barrel dirty and less accurate very quickly interesting. Earnest – have you noticed that?

Earnest is using ST barrel, so won’t get dirty as fast as the LW.

]]> 8866db6ecb0b7218e1edad91fd8e78b2 naser404 replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/19/#post-178980 Mon, 02 Sep 2013 03:59:05 -0400 Try doing the test again but with dry firing, it will sound louder but just try it.

]]> 4a532c743019ee4c555213afdb4f3dbc naser404 replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/19/#post-178973 Mon, 02 Sep 2013 02:43:45 -0400 I would have to agree, my standard edgun is some where around the 90dB, would be interesting to see the designs of these shrouds too.

]]> 85738502ad95d10fadeb7f5a5d7275e9 naser404 replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/18/#post-178899 Sun, 01 Sep 2013 08:56:47 -0400 Ok,

So I just opened up the holes on the front from 2mm to 2.5mm & I designed 3 different spacers with different hole sizes, starts with 4mm and goes down to 2.5mm & printed them and I dry fired a couple of shots & it does sound better, I will have to try shooting using pellets and see how it works out later.

I leave you with some…Read more

]]> 243e43f0c82dee5173245026c345ba73 naser404 replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/17/#post-178806 Fri, 30 Aug 2013 17:06:44 -0400 quote Hoot:Interesting!

You might wish to wrap a piece of felt, or fine wire mesh, inside the shroud where the air exits the holes. Several members have done that to slow/muffle the release of air.

Sir Ville had this same problem, but he had forgotten to replace the shroud over the barrel before he shot it!

Regards,

H :shock:…Read more

]]> 687b54c1ce5e68599aae930de2607f0c naser404 replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/17/#post-178743 Thu, 29 Aug 2013 22:27:31 -0400 same location as with the holes at the back of the shroud, I only enlarged them by a bit, I think it was about 2-2.5mm each, this is on the Standard Edgun & its considerably louder.

]]> 43da09955fe6d93802b94a0ede9f6b01 naser404 replied to the topic Making the .25 Edgun quiet, easily and inexpensively... in the forum EdGun https://talonairgun.com/forums/topic/making-the-25-edgun-quiet-easily-and-inexpensively/page/17/#post-178732 Thu, 29 Aug 2013 20:22:40 -0400 I haven’t gone through the whole thread, but this doesn’t work as well on shorter guns as with the Edgun Standard. I did try it but its a lot louder.

]]> 26a7b5561abe0364b58f71c31b4f5800 naser404 replied to the topic Altaros Regulators for AAs4xx (BSA,benjamin marauder e.t.g) in the forum Other Guns https://talonairgun.com/forums/topic/altaros-regulators-for-aas4xx-bsa-benjamin-marauder-e-t-g/page/2/#post-178056 Tue, 20 Aug 2013 17:30:24 -0400 quote camilof:quote Naser404:I bought more than 8 of them so far and none had an issues.

mmm in what kind of Arguns?
I put it in Air Arms S510 Xtra FAC

Many guns.

Evanix Max and was fast enough to fill the pre chamber for semi auto shooting.
Evanix AR6
Rapid S ( 2, one using the bottle and another built inside a home made ctotanium…Read more

]]> 399ed2ccac3373df896fa6c703c3d98d naser404 replied to the topic Altaros Regulators for AAs4xx (BSA,benjamin marauder e.t.g) in the forum Other Guns https://talonairgun.com/forums/topic/altaros-regulators-for-aas4xx-bsa-benjamin-marauder-e-t-g/page/2/#post-178053 Tue, 20 Aug 2013 17:03:05 -0400 I bought more than 8 of them so far and none had an issues.

]]> e60d1a08e05491ff2a73ea4591bea88c naser404 replied to the topic manufacture air cylinder in the forum Mods/Machinists https://talonairgun.com/forums/topic/manufacture-air-cylinder/page/3/#post-177186 Wed, 07 Aug 2013 20:02:05 -0400 Here are a couple I made.
This one is 2024 but I can’t remember dimensions as it was long time ago I did these.

AR6 with extended tube & shroud this one is 4130 if I remember correctly & actually not that heavy since its only 2mm wall.

This is titanium with 7075 “Hollow Fittings” for extra air & also it expands & help push on the…Read more

]]> 7f756bfda3407f738753f08a7123ef4b naser404 replied to the topic Manual multyshot in the forum Kalibrgun https://talonairgun.com/forums/topic/manual-multyshot/page/2/#post-176583 Tue, 30 Jul 2013 22:42:16 -0400 Make it auto indexing magazine !? Simple & easy

]]> 910ba147356ff81d8905228e0a7381f7 naser404 replied to the topic Fox hunting in the forum EdGun https://talonairgun.com/forums/topic/fox-hunting/page/2/#post-176497 Tue, 30 Jul 2013 02:48:47 -0400 ok guys so seriously whats the minimum for shooting foxes and at what range ? Would a .25 FAC work ? say shooting JSB 25.4g at 900 FPS about 44 Ft/Lb ? If so at what maximum range should one do that too ?

]]> 14e532eff8dc77a52380c4e5d0cdd801 naser404 replied to the topic Fox hunting in the forum EdGun https://talonairgun.com/forums/topic/fox-hunting/#post-176337 Sat, 27 Jul 2013 20:56:54 -0400 If you do than please have it on video, in HD please. 😀 😀 😀 😀

]]> d536727ddc39a45615e56b9ff8e47f21 naser404 replied to the topic Accuracy defined in the forum BullPup General Chat https://talonairgun.com/forums/topic/accuracy-defined/#post-176205 Thu, 25 Jul 2013 18:21:23 -0400 quote zocoloco:Kindly note that ED is working extremely hard to optimize his guns for accuracy in the range of 150/250 yds……… 😉

The 100 yds plus game is totally different from 50 yds, and requires a different barrel/pellet/speed combination all together……..

And yes I agree with RC, – any PCP should group “hole in one” at 20/30…Read more

]]> 8ad3cd81e863977cfe3d3e5895545526 naser404 replied to the topic Accuracy defined in the forum BullPup General Chat https://talonairgun.com/forums/topic/accuracy-defined/#post-176200 Thu, 25 Jul 2013 17:25:04 -0400 Here is a group of 5 shots with four top rifles i have, the distance is actually 55 yards not 50 as written on them, since i didn’t have a range finder & just used the marking on the side to guesstimate & later found it was 54-55 with a range finder.

A couple of things to also note. As mentioned by Helder after we cleaned the Edgun barrel we…Read more

]]> 8c56cde5e88e3c9738517189d8874bf7 naser404 replied to the topic Accuracy defined in the forum BullPup General Chat https://talonairgun.com/forums/topic/accuracy-defined/#post-176193 Thu, 25 Jul 2013 16:05:23 -0400 quote donnyfl:Thanks Naser, So basically accuracy is describing shooting long distances (100 yds+). Maybe I am just being too analytical of what people say. Another example “shoots like lasers”. Does that mean theses guns are so powerful that they are shooting straighter than other guns. Less of a loop in projectile path?

I would say more like 50…Read more

]]> 14639c46dede02098cf32086e35e70b1 naser404 replied to the topic Accuracy defined in the forum BullPup General Chat https://talonairgun.com/forums/topic/accuracy-defined/#post-176191 Thu, 25 Jul 2013 15:48:22 -0400 He’s shooting at 20 yards, for that distance ill single hole all day long with my edgun, Air ranger, and a dozen other rifles.

]]> 3d564d4d9c9d8788165c963f68f42eb8 naser404 replied to the topic 1 dead edgun in the forum EdGun https://talonairgun.com/forums/topic/1-dead-edgun/page/2/#post-176120 Wed, 24 Jul 2013 10:15:52 -0400 quote Urgirlinmyjetta:But Hughes said he was only adjusting the trigger and didnt claim to have removed the trigger frame from the gun…so from what I read it seems his linkage was weak and snapped because of stress…

It would never break without removal & firing since there are no forces acting on that link that broke “except” if whoever put…Read more

]]> 5872b0776064baccdd142dc4678d6e0d naser404 replied to the topic 1 dead edgun in the forum EdGun https://talonairgun.com/forums/topic/1-dead-edgun/page/2/#post-176113 Wed, 24 Jul 2013 06:24:54 -0400 Here is mine from the older R2.5 its welded if you want to do that for a quick fix.

]]> 4020330454e3da6598b2ae8561fe94dd naser404 replied to the topic 1 dead edgun in the forum EdGun https://talonairgun.com/forums/topic/1-dead-edgun/page/2/#post-176112 Wed, 24 Jul 2013 06:21:33 -0400 I have a friend who own a gun shop & sells all kind of airguns, since he has no one to service them I offered to help & get to try some rifles for myself & I assure you that he’s had more problems with Daystate & FX than other guns, in fact 2 days ago I fixed a leaking Steyr LG110 and it wasn’t an O-Ring issue it was tolerances problem where the…Read more

]]> e50cc0e3ced25218c2c3bef6592ea42b naser404 replied to the topic 1 dead edgun in the forum EdGun https://talonairgun.com/forums/topic/1-dead-edgun/#post-176100 Wed, 24 Jul 2013 03:46:16 -0400 This is a common issue since the very first Edguns and I already told Ed about it. On my older Edgun R2.5 I had to weld mine and it is much stronger & never broke again, on my newer R3.5s a friend fired the trigger while it was not connected & broke from the first time.

NEVER cock & shoot your trigger while its not connected, the reason is the…Read more

]]> bdebdffea64f82631e582a73dd2e8af0 naser404 replied to the topic Matador R3M English manual. in the forum EdGun https://talonairgun.com/forums/topic/matador-r3m-english-manual/#post-175962 Sun, 21 Jul 2013 22:38:36 -0400 1 – stock
2 – bolt handle
3 – breech
4 – front breech
5 – upper shell
6 – moderator
7 – gauge
8 – filling port
9 – trigger guard
10 – trigger

Maybe add a picture of the gun with these numbered on it.

]]> 65fed09feefc2d93278b4bf1bcb3c02b naser404 replied to the topic .25 Edgun Matador R3M in stock notification in the forum EdGun https://talonairgun.com/forums/topic/25-edgun-matador-r3m-in-stock-notification/page/2/#post-175790 Thu, 18 Jul 2013 09:23:32 -0400 I agree, i got 3 matadors .25, two long & one standard & i wish i ordered all of them standard size.

Ed, i do long range shooting, actually my range is 194 yards & until today i cant find a rifle that will shooting Pepsi cans 7 out of 10 shots at that range. So i will defiantly test the new Edgun at that range & compare it some of the rifles i…Read more

]]> 42e4c87c80c225db0dcff93a74e9ca06 naser404 replied to the topic extruded tube or drawn tube ? in the forum Mods/Machinists https://talonairgun.com/forums/topic/extruded-tube-or-drawn-tube/#post-175558 Sun, 14 Jul 2013 10:41:07 -0400 Yes, you can but you need to go higher in specs, as in wall thickness etc.. also make sure you hydro test to twice at least.

]]> efc2b76dc5370f400a38c7d435dc4f06 naser404 replied to the topic extruded tube or drawn tube ? in the forum Mods/Machinists https://talonairgun.com/forums/topic/extruded-tube-or-drawn-tube/#post-175494 Sat, 13 Jul 2013 14:06:25 -0400 Drawn is better since it has much tighter tolerances & stronger properties.

]]> 454863afbec7fb6f41f7ea778d6f175d naser404 replied to the topic Wolverine Size Tube? in the forum Other Guns https://talonairgun.com/forums/topic/wolverine-size-tube/#post-175493 Sat, 13 Jul 2013 14:02:15 -0400 I had one opened & I cant remember for sure but it was about 40mm O.D with 4-5mm wall, my advice is to use 2024-T3 instead if you want to make a bigger air tube.

]]> 447c13d49883ef8778cab5289b2a019a naser404 replied to the topic Help! My Edgun lost it's mojo in the forum BullPup General Chat https://talonairgun.com/forums/topic/help-my-edgun-lost-it-s-mojo/page/2/#post-174856 Mon, 01 Jul 2013 16:03:11 -0400 Try to remove the front tube 1st, the one covering the shroud, it takes some tries but a rubber glove helps give a better grip, once that is off than you need a 19mm wrench and that shouldn’t be a problem.

]]> e59c41f4eeac5ff79593f33964da0343 naser404 replied to the topic Help! My Edgun lost it's mojo in the forum BullPup General Chat https://talonairgun.com/forums/topic/help-my-edgun-lost-it-s-mojo/#post-174852 Mon, 01 Jul 2013 15:22:10 -0400 You need to shoot it without the shroud 1st to make sure its not clipping, than you take it from there.

]]> 47f068251493245bef1a796e8b7289a5 naser404 replied to the topic Evanix MAX Bullpup in the forum Other BullPups https://talonairgun.com/forums/topic/evanix-max-bullpup/#post-174381 Tue, 18 Jun 2013 18:26:17 -0400 here are some concept magz for the Edgun, all are flawed, and don’t work as intended but incase someone wants to give it a try, I already have a couple more that im working on that I haven’t showed yet, until im sure they don’t work, lol




]]> ef6eb51669cbd476aaa76af0cd798e6f naser404 replied to the topic Evanix MAX Bullpup in the forum Other BullPups https://talonairgun.com/forums/topic/evanix-max-bullpup/#post-174379 Tue, 18 Jun 2013 18:01:34 -0400 quote SECoda:Does it seem heavy compared to the std Matadors?

“If it’s not broke – modify it” 😀

I like your 3D printer! 😎

Hey SECoda,

I cant remember since I gave that gun away now, and I replaced it with the Steyr Hunting 5, this one is one of these rifles that you love everyday more. but with all honesty I never liked the looks of the…Read more

]]> 70f853ecd2591e116a1cdb2c45f60a94 naser404 replied to the topic Evanix MAX Bullpup in the forum Other BullPups https://talonairgun.com/forums/topic/evanix-max-bullpup/#post-174376 Tue, 18 Jun 2013 17:21:11 -0400 its not the best Bullpup, mind you mine shoots great now but only after many modifications. you can read them here.
http://www.egypthunter.com/vb/showthread.php?p=110825#post110825

]]> 77fafa81c33bf7449fbddb740e256f21 naser404 replied to the topic EDgun Matador R3 versus Kalibr Cricket, my comparison.... in the forum BullPup General Chat https://talonairgun.com/forums/topic/edgun-matador-r3-versus-kalibr-cricket-my-comparison/page/42/#post-173418 Mon, 03 Jun 2013 05:13:01 -0400 zoco,

I love your place & the great pictures you take brother. What I would like to know though is since you are one of the first to own the Cricket, are there any changes to the new ones compared to your Cricket ?

]]> 02a1693a7e405e1b8240949ac5f18159 naser404 replied to the topic Stock seem loose.. in the forum EdGun https://talonairgun.com/forums/topic/stock-seem-loose/page/3/#post-173386 Sun, 02 Jun 2013 21:14:13 -0400 I got three Edguns, two long & one slandered & they “all” suffer from a little play and I already told Ed of this issue, I did not yet investigate what’s causing the issue but I will when I get the time.

But yes it seems its a common problem with the new Edguns.

]]> fa498873124cbff1179d883ee3ba8a4b naser404 replied to the topic EDgun Matador R3 versus Kalibr Cricket, my comparison.... in the forum BullPup General Chat https://talonairgun.com/forums/topic/edgun-matador-r3-versus-kalibr-cricket-my-comparison/page/41/#post-173358 Sun, 02 Jun 2013 13:49:47 -0400 Ed,
He’s saying that in the pictures attached which reads in Arabic “for the second time & again” as in they have or will order cricket for the second time.

Also the fact that on Kaliber Gun’s website they are the distributor so it cant be a one time order only.

A year later & 30 pages & this thread is live & going hehehe 🙂

]]> 9688e2e8b24614435fbe66a6709f39c9 naser404 replied to the topic EDgun Matador R3 versus Kalibr Cricket, my comparison.... in the forum BullPup General Chat https://talonairgun.com/forums/topic/edgun-matador-r3-versus-kalibr-cricket-my-comparison/page/41/#post-173311 Sat, 01 Jun 2013 21:19:50 -0400 he says this is your distributor & he sells your guns for 700 Kuwaiti Dinars $2450 & sells the cricket for only 450-550 depending on caliber which is $1570-1900, he also says the Cricket is a better gun.

]]> a80460859b5a23e02bb846dec14303df naser404 replied to the topic EDgun Matador R3 versus Kalibr Cricket, my comparison.... in the forum BullPup General Chat https://talonairgun.com/forums/topic/edgun-matador-r3-versus-kalibr-cricket-my-comparison/page/40/#post-173309 Sat, 01 Jun 2013 21:03:38 -0400 Hi Ed,

I just spoke to Sniper & here is what I understood & I promised him to convey his words to you as is, so please don’t shoot the messenger.

He is saying that your dist. is selling your rifles and he is not giving any customer support back, some of these guys that bought your rifle from him had a couple of issues & when they contacted the…Read more

]]> e7d9abbc9d51236e0b4ef63318418c29 naser404 replied to the topic EDgun Matador R3 versus Kalibr Cricket, my comparison.... in the forum BullPup General Chat https://talonairgun.com/forums/topic/edgun-matador-r3-versus-kalibr-cricket-my-comparison/page/40/#post-173304 Sat, 01 Jun 2013 20:15:27 -0400 أعطيني رقم جوالك، لأني لم افهم قصدك

]]> f13b5ead3e3aa83946e1d4e233a0c1ab naser404 replied to the topic EDgun Matador R3 versus Kalibr Cricket, my comparison.... in the forum BullPup General Chat https://talonairgun.com/forums/topic/edgun-matador-r3-versus-kalibr-cricket-my-comparison/page/40/#post-173297 Sat, 01 Jun 2013 19:43:04 -0400 quote Sniperairgun:When I worked the complaint to YouTube
One you asked me, but etymology
Because you say do not know the language and I do not know
And used a translator, sir,
Hustler distributor in Kuwait only to change my
You are a partner with him

أخ سنيبر، اخبرني ماذا تريد أن تقول وأنا أترجم لاد.

فوالله لم نفهم شئ من قولك

]]> aba18b39dac446ab7cd570378ac27aaa naser404 replied to the topic Edgun: Long or Standard in the forum EdGun https://talonairgun.com/forums/topic/edgun-long-or-standard/#post-172863 Sat, 25 May 2013 11:28:54 -0400 I got two longs & one standard al in .25 and now I regret not getting two standards, after spending time with both I can assure you you will be better off with the standard especially since your going for .22 so the extra shot count at that caliber isn’t going to be significant.

The standard isn’t that much shorter than the long but the feel is huge.

]]>