That’s why I could not find any site info.
I’ll call him.

Tia,
Don

That will be the same path I am going to use,
once I have the Condor in hand and use it enough to figure out the best pellets for accuracy etc.

I have a very good company that grinds my custom CF rifle/pistol reamers, to any spec’s you want etc.

What I am really wanting, is to find a AR bbl company that has more/different twist…Read more

Then start at 10yds measured, shoot 3 well aimed shoots, mark them for that yardage,
move to 20 yds, do the same, and keep moving the distance out farther,
until you can no longer…Read more

Can you provide how your 22 is set up,
are you using a regulator, HPA or Co2 etc.

Tia,
Don

Rick
I had planned on getting a sample of all the smaller tanks,
along with a regulator for testing, all the pellets suitable for shooting.

I am making a master list of the items needed etc.

Attempting to weed out the stuff NOT needed.

Tia,
Don

The email was another out of the box thinking Idea,
attempting to find a very cheap and available means for the G-kid etc,
using the Condor, until I have every thing set up.

The Hammerli 850 uses the same 90 grm co2 bottles and also can use the 2-co2…Read more

Question,
Does dial up’s work with a AR, I don’t know much about the pellets flight, PSi levels etc,
or is the pellets flight flat enough to just use a hold over with the cross hairs, at XYZ ranges etc?

I am just getting into AR and the…Read more

Question,
Does dial up’s work with a AR, I don’t know much about the pellets flight, PSi levels etc,
or is the pellets flight flat enough to just use a hold over with the cross hairs, at XYZ ranges etc?

I am just getting into AR and the…Read more

I have been told NOT to use any rimfire rifle scope on an air rifle, as it can tear the internal lens out of them etc.
I am also wondering about the scope height issues etc, with the stock OEM tanks mounted the way they are,
I am hoping that there is a work around for dropping the air tank down an inch or so,
as I am long…Read more

I have been told NOT to use any rimfire rifle scope on an air rifle, as it can tear the internal lens out of them etc.
I am also wondering about the scope height issues etc, with the stock OEM tanks mounted the way they are,
I am hoping that there is a work around for dropping the air tank down an inch or so,
as I am long…Read more

This Condor rifle is used and comes with a 4x15x50mm scope (Hawk brand) IIRR,
several cans of pellets, unknown brands/types, hard case, cleaning gear,
per the original owner it has less than 1/2 can of pellets thru it,
has not been modded/mess with etc, for $625 to my door,
this rifle is around 5-6yrs old, has a Red safety.

I plan…Read more

Question,
Within the same type of rifle, ie, Condo and Condor SS,
what does the SS stand for?
Is this “SS” the same for Talon etc?

Tia,
Don

More info provided,
I have my eye on a Condor 22 caliber, 18″ bbl,
I will upgrade the add on’s to increase the accuracy etc, to make what I want to do etc,
accuracy first, very quite next.

I would use a hand pump first, then go to a HP electric pump later one,
looking at a Hill 4 gen to start off, as it would be a 100+ drive one way…Read more

Thank you for that info, that helps.

Some more questions if you don’t mind, I am 6’+ tall, have long arms and necked, (Yep, I left that door open),
from the photo’s on the site and OEM photo’s etc,
I am afraid that I won’t be able to get a proper cheek weld in OEM configuration,
Is there a way to lower/drop the air tank down, so I can use…Read more

What is the length of that bottle, from where it screws in, collar flange to end of the bottle?
Is this the smallest bottle for this pistol? The AF site does not give any info, that I can find.
With that same butt…Read more