https://talonairgunforum.com/members/paul-brov/activity/ Activity feed for paul-brov. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 6da8e29dc2e750a4233fa20a4de7fb8c https://talonairgun.com/forums/topic/free-float-barrel-on-cricket-carbine/page/2/#post-254067 Mon, 30 May 2016 20:17:55 -0400 So if free floating what’s holding the barrel into the block?

]]> b9cf98ce4b1bdd0f6ff5b410af983fad https://talonairgun.com/forums/topic/movement/#post-227788 Mon, 01 Jun 2015 20:41:18 -0400 Tried to add a pic of the target I’ve shot but can’t up load I’m using iPhone 5

]]> f1d92d7c57893fcb2f41d2725959192e https://talonairgun.com/forums/topic/movement/#post-227768 Mon, 01 Jun 2015 17:52:25 -0400 I have used both and both shot crap.

]]> 9adff8aa62ba7119efc8424d16e2d9a2 https://talonairgun.com/forums/topic/movement/#post-227760 Mon, 01 Jun 2015 16:28:48 -0400 Sub 12

]]> 5773188a3317371404831ec1e468dd6d https://talonairgun.com/forums/topic/movement/#post-227759 Mon, 01 Jun 2015 16:28:13 -0400 Ran out of jsb 18g have AA 16g 5.51 and I’m happy at the mo with what I’ve seen,

]]> 5f324e205abe4cb5c7ea610f331cc293 https://talonairgun.com/forums/topic/movement/#post-227693 Sun, 31 May 2015 21:55:19 -0400 And it’s r3m

]]> 0d58b9625df4f9dafc7937b3153a6ed8 https://talonairgun.com/forums/topic/movement/#post-227689 Sun, 31 May 2015 21:18:11 -0400 Thanks for replying guys movement or excessive movement was down to not tightening the breech screws enough!! I’m a tit…. But as you say shouldn’t alter accuracy. The scope is new falcon menace ffp I can swop over… One thing I have noticed is how tight I’ve been holding the gun lightly works best and the group I’ve just had is a lot better…Read more

]]> b2f7bc7bf8bdd023a253fc7c74b40afa https://talonairgun.com/forums/topic/movement/#post-227598 Sat, 30 May 2015 19:18:02 -0400 I’ve taken my time and tried to find as much info as poss before I try anything so I’m gutted at the moment

]]> 393c1d8298a90137e485398d4bc77630 https://talonairgun.com/forums/topic/movement/#post-227587 Sat, 30 May 2015 18:02:16 -0400 Have I missed a part or something

]]> a3e0ea969fd3c2dfd3c09e7948811b9c https://talonairgun.com/forums/topic/reg-setting/#post-226890 Mon, 18 May 2015 20:43:33 -0400 All sorted

]]> 7a2fe57112d94b5648695bb40a5e6088 https://talonairgun.com/forums/topic/ffs-d67/#post-226877 Mon, 18 May 2015 16:13:26 -0400 I will lol

]]> 91ad28ca9ae4228365283986f1937549 https://talonairgun.com/forums/topic/ffs-d67/#post-226875 Mon, 18 May 2015 16:02:28 -0400 Ok o ring sorted and I pushed it in lol

]]> 26060313e7fd4340eeccf95fa14c0b6c https://talonairgun.com/forums/topic/reg-setting/#post-226871 Mon, 18 May 2015 15:28:44 -0400 No idea normal off ed orings

]]> f049d217b75ecb1e729a64b3e4af1103 https://talonairgun.com/forums/topic/ffs-d67/#post-226863 Mon, 18 May 2015 14:30:59 -0400 I’ve moved it few mm but won’t come out

]]> 08b172ab182b7772269e0fd1998e6986 https://talonairgun.com/forums/topic/ffs-d67/#post-226861 Mon, 18 May 2015 14:28:24 -0400 I’ve taken it apart I’ve removed grub screw but does brass bit come out?

]]> 2a4c29afd06b3fad7e58e6d8eb1f76c1 https://talonairgun.com/forums/topic/22cal-edgun-r3-3m-pellet-preference-16gr-or-18gr/#post-224936 Tue, 21 Apr 2015 20:30:41 -0400 So are we saying 16g 5.51 are better

]]> d4ed28d1fbbf43dafc1c41ad4f92ba15 https://talonairgun.com/forums/topic/edgun-pellets-d87/#post-224935 Tue, 21 Apr 2015 20:29:25 -0400 I’d like to get some ship to UK but wherefrom

]]> 48df50288ed35124bf04113f0152f926 https://talonairgun.com/forums/topic/fao-of-ed-regarding-beech-stocks-on-edguns/#post-224782 Sun, 19 Apr 2015 21:45:09 -0400 Mine is walnut 100%

]]> fc546ba38ce312db06499d82fef9c9e3 https://talonairgun.com/forums/topic/reg-assembly/page/2/#post-224280 Sun, 12 Apr 2015 17:51:19 -0400 Thanks for getting contact ed

]]> 11f5647fee2a596293eef52309cf195b https://talonairgun.com/forums/topic/reg-assembly/page/2/#post-224223 Sat, 11 Apr 2015 20:52:03 -0400 Sorry I’ve just remembered the convo I was askin after a silencer

]]> 0cd7e94ebaa6920cc445e20c0e53e253 https://talonairgun.com/forums/topic/reg-assembly/page/2/#post-224203 Sat, 11 Apr 2015 18:51:30 -0400 Don’t need the reg and rob hasn’t been making any for 6years or more I spoke to him 3 months ago regarding parts

]]> 46640c46b2553996cbf6f75a3936a3ce https://talonairgun.com/forums/topic/reg-assembly/#post-224183 Sat, 11 Apr 2015 15:22:13 -0400 Is there a uk supplyer ??

]]> 66718dd6bdb3c7f4a403e0444dca0e3d https://talonairgun.com/forums/topic/reg-assembly/#post-224170 Sat, 11 Apr 2015 12:59:23 -0400 I’ve emailed ed but no answer

]]> b9277b890c37c03c2019c70f66f6c013 https://talonairgun.com/forums/topic/reg-assembly/#post-224166 Sat, 11 Apr 2015 12:19:43 -0400 This is true

]]> b8107f5b149485719b86097283ffbbdb https://talonairgun.com/forums/topic/reg-assembly/#post-224162 Sat, 11 Apr 2015 11:21:55 -0400 Na all about crickets and can’t be fucked to be fair

]]> 65ee73100457cf0251733300b25ffb51 https://talonairgun.com/forums/topic/reg-assembly/#post-224159 Sat, 11 Apr 2015 08:57:59 -0400 I want new I think

]]> 0a4f22249966afca83a4faec1abaff6d https://talonairgun.com/forums/topic/reg-assembly/#post-224123 Fri, 10 Apr 2015 22:37:50 -0400 Wasn’t to mess just a look really thread on the spacer and the valve are fucked now need replacements I’ve emailed ed no answer yet

]]> 8b2c60424fd0d54eaa7bb9f7257d6492 https://talonairgun.com/forums/topic/reg-assembly/#post-224117 Fri, 10 Apr 2015 21:49:26 -0400 Any one had this before

]]> 7553cd16e29354b6f84f11c23c93b49e https://talonairgun.com/forums/topic/flyers-in-22-and-25/#post-222732 Tue, 24 Mar 2015 22:50:20 -0400 After reading this I looked at my mags with a pocket magnifying glass I’ve got noticed small burr on all edges where the oring groove is made I’ve used super fine paper to remove, not tested as yet

]]> 9dd9fc21b17556456ce436c1a6cb760a https://talonairgun.com/forums/topic/new-r3m-owner-and-i-forgot-to-ask-1/#post-222557 Sun, 22 Mar 2015 21:59:01 -0400 Thanks guys

]]> ea5782cbdeb4390200cba5db9ee9ae27 https://talonairgun.com/forums/topic/new-r3m-owner-and-i-forgot-to-ask-1/#post-222551 Sun, 22 Mar 2015 21:21:16 -0400 I can’t find Ernest does he use diff user name

]]> dcfc55f1415219a235dd35a2177464a9 https://talonairgun.com/forums/topic/ldc-d73/#post-222362 Fri, 20 Mar 2015 00:25:48 -0400 Thanks for the reply bud let’s hope he sends to the uk

]]> 7ecc25402fb6fe1be5647bcee96fac8e https://talonairgun.com/forums/topic/thanksgiving-edgun-small-caliber-sale-from-edgun-usa/#post-213428 Tue, 11 Nov 2014 20:02:59 -0400 Guess not possible

]]> c8ce8688b5b0431ae7d65a97037a1dde https://talonairgun.com/forums/topic/thanksgiving-edgun-small-caliber-sale-from-edgun-usa/#post-213427 Tue, 11 Nov 2014 20:01:10 -0400 Ship to uk?

]]> dfc49637b852b1260963a6fcc8d493fb https://talonairgun.com/forums/topic/ed/#post-213402 Tue, 11 Nov 2014 08:26:09 -0400 Email retured

]]> 53bb14ab73dea04f5c5a264a73bfdfdd https://talonairgun.com/forums/topic/ed/#post-213383 Tue, 11 Nov 2014 00:20:31 -0400 Sure he will has a lot on his plate as I’ve just read didn’t know any of that and not used to it lack communication that is will hang tight for a while. Fair play to him to be honest

]]> 24315fb84100023b488f118d25582922 https://talonairgun.com/forums/topic/ed/#post-213379 Mon, 10 Nov 2014 21:37:21 -0400 No I didn’t read this or any knolage at all

]]> f205f567a6da4a7d58f0b5f832539dc4 https://talonairgun.com/forums/topic/ed/#post-213375 Mon, 10 Nov 2014 20:02:28 -0400 Well up until I paid I had communications most days. I expect a response that’s all I expect

]]> f568b81fb37cbd54108f0a19dae6a0ef https://talonairgun.com/forums/topic/ed/#post-213374 Mon, 10 Nov 2014 19:59:53 -0400 Once money has been pinged over has anyone had any contact from ed if any problems have happened

]]> bbf5216038b481b99caf48bd032e6b52 https://talonairgun.com/forums/topic/hi-d53/page/3/#post-213333 Sun, 09 Nov 2014 22:55:01 -0400 Test done at bench rest so shoulder not a problem

]]> 27bee9253d08db11357d82f982fdc3d0 https://talonairgun.com/forums/topic/hi-d53/page/2/#post-213331 Sun, 09 Nov 2014 22:33:27 -0400 Still have yes but my shoulder isn’t good need a lighter gun groups I sent him 5p at 40 yards so not bad

]]> 33db5426a0fe7938591549e8c59e471f https://talonairgun.com/forums/topic/hi-d53/page/2/#post-213329 Sun, 09 Nov 2014 22:29:38 -0400 Ed set it at sub 12 for me so no need

]]> 8eac4f5ebc942e976f826fbe93353204 https://talonairgun.com/forums/topic/hi-d53/page/2/#post-213328 Sun, 09 Nov 2014 22:28:40 -0400 I did want this as a nv ratting gun not fac really

]]> f28bf2cc65d4fa2428a0ffa6020df32f https://talonairgun.com/forums/topic/hi-d53/page/2/#post-213326 Sun, 09 Nov 2014 22:23:58 -0400 Yes that’s the idea

]]> bf1b329824faf4d2871a2ba457fdf52b https://talonairgun.com/forums/topic/hi-d53/page/2/#post-213323 Sun, 09 Nov 2014 21:16:00 -0400 quote Dave goodall:Did u get the accuraccy issues sorted on this paul looking like admin have blocked u on airgun forum .did u email ed direct he got back to others in a day or two regarding there orders. Atvb dave
Just giving time to bed in, sure it’s coz he’s bizzy others have said takes a while to get hold of him guess you were lucky with few…Read more

]]> 3baae59321be477204b6194cecfdf4f5 https://talonairgun.com/forums/topic/hi-d53/page/2/#post-213322 Sun, 09 Nov 2014 21:10:13 -0400 Just log in ok so no idea

]]> 0cb642088b8b866567a030ab73e643c7 https://talonairgun.com/forums/topic/hi-d53/page/2/#post-213321 Sun, 09 Nov 2014 21:08:10 -0400 No idea mate

]]> 433afe7cadd3e65c8de575521ea19d1f https://talonairgun.com/forums/topic/hi-d53/page/2/#post-213226 Sat, 08 Nov 2014 00:01:49 -0400 No issue with the trigger seems tidy

]]> 454130a573b2c61283ce3ff404b49687 https://talonairgun.com/forums/topic/hi-d53/page/2/#post-213225 Fri, 07 Nov 2014 23:59:07 -0400 Emails not ails

]]> d73486c1e70aab6786daca9660d78116 https://talonairgun.com/forums/topic/hi-d53/#post-213224 Fri, 07 Nov 2014 23:58:15 -0400 Getting a selection of pellets ordered from pellet perfect next week I’m sub 12 power so thinking 5.50 or 5.51 I may be slightly happier if my other parts had arrived with the fuzzing gun and ails answered to a reason as why not

]]>