Talonairgun | phat96 | Activity https://talonairgunforum.com/members/phat96/activity/ Activity feed for phat96. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 b351c8a067942386570c31e8c665b29b phat96 replied to the topic QB78 Bullpup in the forum Other BullPups https://talonairgun.com/forums/topic/qb78-bullpup/#post-153052 Tue, 03 Apr 2012 07:40:52 -0400 Any pics?

]]> 31b2dfad725cd3a33449aa4a1bfc6685 phat96 replied to the topic 10 shot mag for the stealth in the forum Talon/Talon SS https://talonairgun.com/forums/topic/10-shot-mag-for-the-stealth/page/4/#post-134838 Mon, 30 May 2011 16:53:31 -0400 Well I stand corrected not only a BS artist but an Ass hole to boot like I said “Put up or Shut up” you claim skills SHOW ME!

]]> 3eba93a08787f77d97f283336f0bc930 phat96 replied to the topic 10 shot mag for the stealth in the forum Talon/Talon SS https://talonairgun.com/forums/topic/10-shot-mag-for-the-stealth/page/4/#post-134820 Mon, 30 May 2011 04:16:02 -0400 put up or shut up
all I hear is a lot of smoke (another word for BS)

]]> fa6f66d9bd0482a0e06f6ff4dd4bfeda phat96 replied to the topic Stealth spares for vale assembly uk in the forum General Chat https://talonairgun.com/forums/topic/stealth-spares-for-vale-assembly-uk/#post-132210 Fri, 15 Apr 2011 03:45:09 -0400 If you contact AirForce you can order any part needed. If you can Hot Rod your Talon contact Talon Tunes and Tony can overhaul the valve and flow higher

]]> 4425e918cb3717c82f9556512377fa9f phat96 replied to the topic valve wrench in the forum General Chat https://talonairgun.com/forums/topic/valve-wrench/#post-132002 Mon, 11 Apr 2011 21:32:04 -0400 If you are really tight on $ go on the internet look up Dodge collar or axle spacer ( I think 1 1/4″ I.D.) an grade 8 bolt (think 3/8″ or what ever the collar set screw is) machine or grind down the tip .

]]> 3ff53f83c39f175ded210a7d451b0bf0 phat96 replied to the topic The O ring trick in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/the-o-ring-trick/#post-130674 Tue, 22 Mar 2011 07:18:34 -0400 What size “O” ring are you using? Are you removing the top hat then installing the “O” ring? Or are you “Stretching” the “O” ring over the top hat?
thanks

]]> 3c2e9c49cd5695604e258c08172bf7a4 phat96 replied to the topic missing barrel screw in the forum General Chat https://talonairgun.com/forums/topic/missing-barrel-screw/#post-130480 Sun, 20 Mar 2011 02:11:13 -0400 I guess that you could fabricate a wider barrel bushing and drill & tap the frame bottom hole forward of stripped thread and leave frame side screw in same (present) location

]]> 9e792c779d7392f7a7e1b47133db2364 phat96 replied to the topic Most Effective Condor Shroud in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/most-effective-condor-shroud/#post-130469 Sat, 19 Mar 2011 23:26:44 -0400 any pic of baffles ?

]]> 612fd46677d98b8570073add68e15cc4 phat96 replied to the topic Looking to buy a Chronograph...What kind should I Get? in the forum General Chat https://talonairgun.com/forums/topic/looking-to-buy-a-chronograph-what-kind-should-i-get/#post-130368 Fri, 18 Mar 2011 07:11:16 -0400 Happy with my Combro
http://www.chronoscopes.com/
portable price is right

]]> f54099571bb2839845a0904d2a98fed2 phat96 replied to the topic Talon SS C02 50 yard performance?? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-c02-50-yard-performance/#post-130360 Fri, 18 Mar 2011 02:30:41 -0400 .177 will be more economical per shot in pellet cost and air consumption if you are punching paper or chasing a tennis ball if that is the purpose, you still can pop the occasional squirrel, small bird or rat

]]> 0e640a75d85cd0b589adaeed4adf7eab phat96 replied to the topic Iv asked this before but no real answer in the forum Mods/Machinists https://talonairgun.com/forums/topic/iv-asked-this-before-but-no-real-answer/#post-130359 Fri, 18 Mar 2011 02:06:02 -0400 My Condor valve stem retainer brass thread is 1/2′ x 20tpi (same as spring retainer thread tpi)

]]> 40cd5d6d7a8137e482f1cffdbf4c11cc phat96 replied to the topic Hammer Sear Problem in the forum General Chat https://talonairgun.com/forums/topic/hammer-sear-problem/#post-130063 Sat, 12 Mar 2011 18:50:08 -0400 Removed my safety 500 shots ago when i did trigger set screw mod, no problems so far

]]> cca79b7deb9e1b95ca5de841b511edcd phat96 replied to the topic making my stealth more comfortable to shoot in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-my-stealth-more-comfortable-to-shoot/page/2/#post-129847 Thu, 10 Mar 2011 05:54:54 -0400 Awesome

]]> 291aeacaa72fc858a8f80c678f6d5d29 phat96 replied to the topic making my stealth more comfortable to shoot in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-my-stealth-more-comfortable-to-shoot/#post-129716 Tue, 08 Mar 2011 22:06:10 -0400 What alloy are you using

]]> 25e7a9a324c80a55b43d655e720690c1 phat96 replied to the topic making my stealth more comfortable to shoot in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-my-stealth-more-comfortable-to-shoot/#post-129447 Sun, 06 Mar 2011 03:40:15 -0400 Looks good, is there enough room for a quick disconnect (1/8″ pipe) so the tank will not have to be removed for filling any idea if you are going to go into production?

]]> 7189c4bc350b466f71ac8d30a3de84f4 phat96 replied to the topic How do you dump a Tank in the forum General Chat https://talonairgun.com/forums/topic/how-do-you-dump-a-tank/page/2/#post-129268 Thu, 03 Mar 2011 20:00:09 -0400 Don’t you just hate it when your nipples are twisted to much, or is it just me?

]]> 1e0132fdc6ef7316ed39e5026aa563c0 phat96 replied to the topic help needed on uk stealth (talon).........low power issue. in the forum General Chat https://talonairgun.com/forums/topic/help-needed-on-uk-stealth-talon-low-power-issue/#post-129215 Wed, 02 Mar 2011 23:41:29 -0400 quote ssshooter:Load a heavier pellet 🙂

My non-FAC TSS will get an enormous boost in power with heavier pellets, like 18fpe to 23fpe by just increasing from 10.6gn to 15.8gn. For your gun try raising from 8.0gn to 10.6gn.

Phat96… F.A.C. http://en.wikipedia.org/wiki/Air_gun_laws#United_Kingdom
Thanks

]]> 43f7c5b421df6f860bbf06e3e64e39a7 phat96 replied to the topic help needed on uk stealth (talon).........low power issue. in the forum General Chat https://talonairgun.com/forums/topic/help-needed-on-uk-stealth-talon-low-power-issue/#post-129208 Wed, 02 Mar 2011 22:02:14 -0400 Just for the info
What is a FAC (only in the UK?) and what would one need to get one and how much $. Thank God we don’t need one (Yet)

]]> 9ae0499d39216dff96e703c624550bbc phat96 replied to the topic location in the forum General Chat https://talonairgun.com/forums/topic/location-d61/#post-129205 Wed, 02 Mar 2011 20:53:56 -0400 quote benneeb0y:Time to try out that new frame lube 😆
I have some that she sez tastes like Tuna

]]> 2f9333138c6453f1018f01b3bfd44781 phat96 replied to the topic SCOPE HIGHT in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/scope-hight/#post-128909 Fri, 25 Feb 2011 05:30:01 -0400 quote tbonetip:Does that adapter still let the condor keeps its power and velocity that it had from the regular bottle?
YOU CAN CHOOSE THE PSI OUTPUT OF THE REGULATOR

]]> 02afe86dcade215c546af65018303b8e phat96 replied to the topic SCOPE HIGHT in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/scope-hight/#post-128879 Fri, 25 Feb 2011 01:57:09 -0400 Get yourself an E-taC ( http://www.kyhistoricsalvage.com/etac.html) with cast & cant best money you can spend for line of sight now they also have regulated models.

]]> 9b9381a9aa644eb0c417e9941b5523ab phat96 replied to the topic 3000 By The End Of Feb? in the forum General Chat https://talonairgun.com/forums/topic/3000-by-the-end-of-feb/page/2/#post-128876 Fri, 25 Feb 2011 01:41:57 -0400 3031 min

]]> 3349f9a7a026146c8aafe8ab96f3df85 phat96 replied to the topic First time back in the workshop in months in the forum Mods/Machinists https://talonairgun.com/forums/topic/first-time-back-in-the-workshop-in-months/#post-128793 Wed, 23 Feb 2011 22:39:50 -0400 Why don’t you remove the tank mount collar then you can machine all valve components into the adapter and have plenty of valve options and chamber volume

]]> fc9ae57bbc487b1e9c7bb1dd33a89ed8 phat96 replied to the topic Are all Air Force Accessories of poor quality? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/are-all-air-force-accessories-of-poor-quality/#post-128757 Wed, 23 Feb 2011 08:26:00 -0400 quote Marc:To be honest not only the accesories are of poor quality. The rifle itself is poorly made. You’d guess in this time of cnc machines they should be able to make some tight fitting quality kit!

-crappy trigger out of the box (with a little work and 3 setscrews it can be close to target rifle performance)
-uber crappy safety gets dumped…Read more

]]> 71a739223c64572d05228bdc500ca32d phat96 replied to the topic Need help to complete LDC design in the forum Mods/Machinists https://talonairgun.com/forums/topic/need-help-to-complete-ldc-design/#post-128424 Fri, 18 Feb 2011 08:20:49 -0400 quote Norgeiron:I have built an inexpensive LDC that is very effective at noise reduction, but to perfect the design I need what I believe to be 1″ outside diameter pipe to slip-fit inside the Talon/Condor frame. Then I can securely attach the LDC and prevent clipping. My local hardware store does not have any, so where can I get pipe that will…Read more

]]> adb41dc7db3988a443fadfa6097c6f9f phat96 replied to the topic Help Needed Please in the forum Mods/Machinists https://talonairgun.com/forums/topic/help-needed-please/#post-128403 Thu, 17 Feb 2011 21:24:19 -0400 Try using a Dremel and cut a slot and you can use a screw driver (an impact driver is better) good luck

]]> 1902ed1699c478aa67d4c4b6c3df58e5 phat96 replied to the topic Yote hunting with Talon? in the forum General Chat https://talonairgun.com/forums/topic/yote-hunting-with-talon/page/3/#post-128366 Thu, 17 Feb 2011 02:02:10 -0400 quote Jerry:quote Phat96:Jerry
I thought that was you. BTW it was 310 yards that’s why it was shooting 1/4″ low

I wish you had told me it was 310! I got so pissed off at not being able to get better than 1/12 MOA at 300 that I threw that POS away. I should have waited a couple minutes as right after I tossed that crap gun, I was sloppy with the…Read more

]]> 7af6e97e261660bbfdca5d77b6122715 phat96 replied to the topic Yote hunting with Talon? in the forum General Chat https://talonairgun.com/forums/topic/yote-hunting-with-talon/page/3/#post-128331 Wed, 16 Feb 2011 03:55:19 -0400 Jerry
I thought that was you. BTW it was 310 yards that’s why it was shooting 1/4″ low

]]> c71637424de708b1c71125a98c037996 phat96 replied to the topic Greeting from England in the forum Talon/Talon SS https://talonairgun.com/forums/topic/greeting-from-england/#post-128238 Mon, 14 Feb 2011 20:19:35 -0400 The best thing that you can do is browse all the old posts in all the forums then you will be informed, then you will have basic knowledge

]]> 494a14b33507f3a5f008b9f1e9305206 phat96 replied to the topic Need advice to assembly my talon in the forum General Chat https://talonairgun.com/forums/topic/need-advice-to-assembly-my-talon/#post-127779 Fri, 04 Feb 2011 18:23:54 -0400 quote markus_74:Hello,

I have problem to install the talon screws, I don’t have any idea where it should be.

please, advice.
Thank you
markus



To understand trigger mechanism check this out
http://www.talonairgun.com/forum/viewtopic.php?t=132
Knowledge is power

]]> af264b46948b02b109bb6a0060e9f1b7 phat96 replied to the topic Tank Gauge in the forum Mods/Machinists https://talonairgun.com/forums/topic/tank-gauge/page/3/#post-127715 Thu, 03 Feb 2011 21:58:53 -0400 quote baz:


all I get is photobucket deleted or moved photos

]]> 7ae5ff6d7585b55d12c0b088aa5df779 phat96 replied to the topic Air Pressure in the forum General Chat https://talonairgun.com/forums/topic/air-pressure/#post-127686 Thu, 03 Feb 2011 06:05:34 -0400 quote LURKER #1:quote Phat96:In the quest for knowledge. If regulated what psi would one set air pressure for 1.) accuracy 2.) power 3.) shot count 4.) all around compromise?

What caliber, what barrel length, what tank, what adapter, what range, field target or pest control?

Considering .22 caliber Condor there isn’t any one regulator available…Read more

]]> 715700f9610aa05c073551d67b403d19 phat96 replied to the topic HPA/CO2 Threading and adaptors. in the forum General Chat https://talonairgun.com/forums/topic/hpa-co2-threading-and-adaptors/#post-127661 Wed, 02 Feb 2011 22:27:02 -0400 quote Alejandro_rg:Hello, I just bought a Talon SS and wanted some advice.

I’m an amateur paintball player, obviously I don’t know much about HPA, just ask someone to fill the tanks and presto, with this purchase, my neighbor lend me a SCUBA tank to fill my Talon (he is interested in PCP’s as well), and I’m just gonna fill it some time soon.

I…Read more

]]> d0fa1ac38d2d6825638f37b2ea450757 phat96 replied to the topic Condor Valve in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-valve-d63/page/2/#post-127555 Tue, 01 Feb 2011 02:31:19 -0400 quote Norgeiron:Quote: How is the Condor valve doing, do you have to mod the valve for more power?

Phat,
I posted on this today, reporting that I was getting identical phone book penetration with my new Condor valve as I was with my original Talon valve. Tony explained to me that, in order to get the Condor valve to really put out full…Read more

]]> f51afcae5ad0176676171fc39f99361c phat96 replied to the topic Condor Valve in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-valve-d63/#post-127543 Mon, 31 Jan 2011 23:55:39 -0400 quote Norgeiron:Phat,
With the 12″ .22 barrel, you won’t get as much power out of your Condor as you will with an 18″ or 24″ barrel. A lot of the extra air is just wasted. But that’s what you want for backyard Kaneohe shooting, right? Too much power isn’t good in a neighborhood setting. Norgeiron
How is the Condor valve doing, do you have to…Read more

]]> a7fb25cc6f7815fbef801d01f9034ef8 phat96 replied to the topic Condor Valve in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-valve-d63/#post-127536 Mon, 31 Jan 2011 23:07:26 -0400 quote Jerry:Phat,

Please stop shooting golf balls. I’m telling you I’ve done this and it’s not a good idea. Yes, a center hit with enough power penetrates and gets a nice little roll. Less perfect shots have sometimes random and unfortunate results. If you get the “wiffle” golf balls you get a lot more action from a hit on the same size…Read more

]]> 3ddfee55238224c1e0f73b4732c31d83 phat96 replied to the topic Condor Valve in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-valve-d63/#post-127526 Mon, 31 Jan 2011 21:59:59 -0400 quote SAVAGESAM:quote Phat96:quote SAVAGESAM:Stock Condor valve will send a 21.1 Gr. Kodiak super sonic. You don’t want that as it hurts accuracy. Unless you’re just after max speed and not concerned with accuracy. Max your P.W. out and you will hear the sonic crack. What are you filling your tank to? What is your top hat set at?
Top hat stock…Read more

]]> 2bd25634e6912b7944c58cdea212c7d5 phat96 replied to the topic Condor Valve in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-valve-d63/#post-127523 Mon, 31 Jan 2011 21:40:22 -0400 quote SAVAGESAM:Stock Condor valve will send a 21.1 Gr. Kodiak super sonic. You don’t want that as it hurts accuracy. Unless you’re just after max speed and not concerned with accuracy. Max your P.W. out and you will hear the sonic crack. What are you filling your tank to? What is your top hat set at?
Top hat stock height .091 @ 2500 psi = 1029 fps

]]> 8937db20282a8f8a924401b83a0b05bd phat96 replied to the topic Condor Valve in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-valve-d63/#post-127522 Mon, 31 Jan 2011 21:33:12 -0400 quote 80 GRIT:quote Phat96:Been shooting my Condor (stock) and looking for more FPE. What if any, modifications should/ could be made to the Condor valve, or convert my spare Talon valve with modified Condor parts for better performance. At this time would like to keep it .22 cal until I put a few thousand rounds through it to get used to the…Read more

]]> 5eaf483f66b7a0601b6e76364c35357d phat96 replied to the topic Dangerous game hunting with Talon in the forum General Chat https://talonairgun.com/forums/topic/dangerous-game-hunting-with-talon/#post-127512 Mon, 31 Jan 2011 19:36:08 -0400 You do not need to go to Scotland to bag haggis and you do not need a Talon American Express and Google will do

]]> bc1f91ab67b57a07d887d3d81aaed868 phat96 replied to the topic Got Snow? Lots of pics.. in the forum TAF Gallery https://talonairgun.com/forums/topic/got-snow-lots-of-pics/#post-127293 Fri, 28 Jan 2011 01:17:39 -0400 What is all that White stuff you threw all over the place?
80 °F (inside & Outside)
Mostly Cloudy
Phat96

]]> dd3ec2b1f5ba57c33c8bcfd00338fc42 phat96 replied to the topic Filling the Talon Tank in the forum General Chat https://talonairgun.com/forums/topic/filling-the-talon-tank/#post-127084 Tue, 25 Jan 2011 04:03:09 -0400 What is your Scuba tank pressure?

]]> 4da0d5878017518e961a73a19bebe81f phat96 replied to the topic NEW AIRFORCE PISTOL and barrels in the forum General Chat https://talonairgun.com/forums/topic/new-airforce-pistol-and-barrels/#post-126772 Wed, 19 Jan 2011 08:36:23 -0400 Just a thought
Does anybody know of a ‘SHOTGUN” (load of #6 shot) type of conversion for AirForce PCP?

]]> 9f893e2bca0270f42d00de2e071077b2 phat96 replied to the topic Side lever .25 cal build in the forum Mods/Machinists https://talonairgun.com/forums/topic/side-lever-25-cal-build/page/2/#post-126558 Fri, 14 Jan 2011 02:27:32 -0400 csdilligaf all I can say is WOW with that talent you could make an impressive Bullpup

]]> 356eae83f7de36cbff879fc5e35d014e phat96 replied to the topic Combro Chronoscope in stock now 12/9/10 in the forum General Chat https://talonairgun.com/forums/topic/combro-chronoscope-in-stock-now-12-9-10/page/4/#post-126557 Fri, 14 Jan 2011 02:13:59 -0400 quote Phat96:Aloha
After reading your posts seemed a good item for my condor. Just ordered one 12/28 @ 07:34 hr (HST). Lets see how long it takes to go half way around the world
My Combro arrived in today’s mail 1/13/11 looks great
Phat96

]]> 9756cb296c4125fc6b2cc0f8b1615738 phat96 replied to the topic New Talon SS in the forum General Chat https://talonairgun.com/forums/topic/new-talon-ss-d25/#post-126059 Wed, 05 Jan 2011 06:27:09 -0400 Don’t know if approved by AF but I release safety hold breach forward pull trigger and slowly move breach rearward good to go (remember that you have a round in the muzzle

]]> 7fdf93211b4bbd57492ae69ccb625323 phat96 replied to the topic any members from the Big island of Hawaii? in the forum General Chat https://talonairgun.com/forums/topic/any-members-from-the-big-island-of-hawaii/#post-126034 Wed, 05 Jan 2011 00:37:11 -0400 Check out http://www.nautilusdivehilo.com/ Nautilus Dive Center Inc.

382 Kamehameha Ave. Hilo, Hawaii 96720

Phone / Fax:

(808) 935-6939

They can fill & test SCUBA tanks

]]> fd081d972973d3a0550625874eb7967e phat96 replied to the topic 10 shot mag for the stealth in the forum Talon/Talon SS https://talonairgun.com/forums/topic/10-shot-mag-for-the-stealth/page/3/#post-125763 Fri, 31 Dec 2010 21:33:23 -0400 I got the bungee, know where to get the Red bull, any body has connections on how to get a hold of Spider Monkey???

]]> 10cbaa5e3c521a43c8b6d97350b2c40d phat96 replied to the topic Erbes RV1300 whit elbow and gauge (REGULABLE) in the forum Mods/Machinists https://talonairgun.com/forums/topic/erbes-rv1300-whit-elbow-and-gauge-regulable/#post-125667 Thu, 30 Dec 2010 18:07:31 -0400 Nice valve! do you have a explosion view so I can understand the principal of valve regulation
thanks

]]> 597b33ce7e3b67f2f7fcb6c843e28b82 phat96 replied to the topic Combro Chronoscope in stock now 12/9/10 in the forum General Chat https://talonairgun.com/forums/topic/combro-chronoscope-in-stock-now-12-9-10/page/2/#post-125526 Tue, 28 Dec 2010 17:35:38 -0400 Aloha
After reading your posts seemed a good item for my condor. Just ordered one 12/28 @ 07:34 hr (HST). Lets see how long it takes to go half way around the world

]]>