Talonairgun | pwr2all41998 | Activity https://talonairgunforum.com/members/pwr2all41998/activity/ Activity feed for pwr2all41998. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 ac1f74fcfba355922905237aee07e35c pwr2all41998 started the topic Mutant rebuild needed in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-rebuild-needed/ Wed, 19 Aug 2020 23:58:20 -0400 I’ve got an issue with a .22 mutant standard where the air leaks out until around 95bar. It appears to be leaking inside the breech block somewhere. I’ve changed the big seals on the outside of regulator and it did t make a difference. It seems like it needs new seals and I’ve texted talontunes a few times requesting a for a quote for a rebui…Read more

]]> 571256be32e0da8635993ec4b87f1015 pwr2all41998 replied to the topic JSB 22. 25.39 Jumbo Monsters & the Mutant? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/jsb-22-25-39-jumbo-monsters-amp-the-mutant/#post-269176 Wed, 17 May 2017 11:40:19 -0400 My mutant seems to like the JSB Straton Jumbo Heavy 25.39 gr pellets. It stacks pellets at 50yds just like the 18.13 gr, but obviously they are a little slower. I have not chrono’d them yet.

]]> 298e635542456c2c164f97ae9c84935b pwr2all41998 replied to the topic Weihrauch Moderators Available in the US! in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/weihrauch-moderators-available-in-the-us/#post-267305 Tue, 14 Mar 2017 03:24:57 -0400 Because there are various interpretations of the law depending on who or where you live in the states. Moderators for firearms are heavily controlled through the NFA national firearms act. They have strict regulations and a very painful process to get them even i states ithat are legal to own them. The airgun moderator is exempt from this as it is…Read more

]]> a2e5079fb2cd89f2bb88177b0da06cd3 pwr2all41998 replied to the topic Vulcan Tactic Shroud in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-tactic-shroud/#post-265483 Sun, 29 Jan 2017 15:49:47 -0400 Thanks Donny

]]> c3074231437b2f3539137e29ab929708 pwr2all41998 replied to the topic Vulcan Tactic Shroud in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-tactic-shroud/#post-265469 Sun, 29 Jan 2017 14:20:38 -0400 Thanks Donny, I realize I need an LDC at the end, I was just trying to make it as quiet as I could in standard form. I already have an LDC adaptor to put on my FatBoy or Weihrauch .25 LDC. Here are the various options I have seen. My tactic is a gen 3 or 4 but has the earlier model Shroud baffles at the top of this picture.

https://goo.gl/images/uL8WG4

]]> 00a1e433a5784a7c0a2cdd8347d4f8e7 pwr2all41998 replied to the topic Vulcan Side cocking lever by Airgun Technology in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-side-cocking-lever-by-airgun-technology/page/9/#post-265404 Fri, 27 Jan 2017 20:39:48 -0400 Awny, that sucks… This happened to me with a package recently. It had signature required and was delivered to the wrong place. USPS looked up the gps of where it was signed for and realized my address and the gps coordinates were not a match. They figured out where it was delivered, picked it back up and dropped it off to me eventually. Pain the…Read more

]]> 1faa9c959018172bb28c97b1998a5950 pwr2all41998 replied to the topic Vulcan Side cocking lever by Airgun Technology in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-side-cocking-lever-by-airgun-technology/page/8/#post-265381 Fri, 27 Jan 2017 11:37:56 -0400 I am using a Plano tactical 42″ case.

]]> 8c27232ad599c7328fdb7a925537e1fa pwr2all41998 replied to the topic Vulcan Side cocking lever by Airgun Technology in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-side-cocking-lever-by-airgun-technology/page/8/#post-265358 Fri, 27 Jan 2017 01:42:23 -0400 Installed, works like butter!! Slicker than shit through a goose.

]]> 89084e31749fc099717632b53ff5557e pwr2all41998 replied to the topic Vulcan Side cocking lever by Airgun Technology in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-side-cocking-lever-by-airgun-technology/page/8/#post-265352 Fri, 27 Jan 2017 00:10:46 -0400 Thanks guykuo!

]]> 68616e937ff0f28baa6eeda69deda5bd pwr2all41998 replied to the topic Vulcan Side cocking lever by Airgun Technology in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-side-cocking-lever-by-airgun-technology/page/7/#post-265348 Thu, 26 Jan 2017 22:28:15 -0400 My sidelever showed up today!! I must be dumb, but is the old bolt handle easy to remove? I was lucky in that my old sideplate screws came out easy, now I have to figure out a way to remove the bolt without marking it up.

]]> 1eca3e9cfe2e735dd107d4ea0f0c22d0 pwr2all41998 replied to the topic Noticing a rattle on my Mutant in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/noticing-a-rattle-on-my-mutant/#post-263940 Sun, 01 Jan 2017 04:20:58 -0400 It’s the hammer. Both the mutant and many of the FX guns have this rattle if you forcibly shake the gun back and forth . The hammer is basically floating inside. No need to worry.

]]> 408d1a1285c2bc07e98b01b300d8b83a pwr2all41998 replied to the topic Weihrauch Moderators Available in the US! in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/weihrauch-moderators-available-in-the-us/#post-263798 Wed, 28 Dec 2016 22:36:09 -0400 They work very well.

]]> f886cd87c9e90c52ff8c29fe6b35d6c4 pwr2all41998 replied to the topic Taipan Mutant Standard and Compact LDC Adapters in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-standard-and-compact-ldc-adapters/#post-262584 Mon, 05 Dec 2016 13:50:21 -0400 Tony, I got my 1/2″ 20 UNF adapter last week with the FatBoy LDC. All I can say is the machining is top notch. The threads are not sloppy at all, and it fits perfectly on both my Mutant and Vulcan. Super happy!

]]> cbcb8ef8fe2a07b391c340938050c025 pwr2all41998 replied to the topic Taipan Mutant and FatBoy LDC in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-and-fatboy-ldc/#post-262448 Sat, 03 Dec 2016 04:13:38 -0400 I tried the FatBoy on my .25 Vulcan too and it was quieter, but not as quiet as with the Weihrauch .25 LDC which surprised me. I thought the FatBoy had more internal volume. In my opinion, the fatboy could be improved by spacing the baffles like the weihrauch with the smaller space in the middle and the larger spaces at either end of the LDC. So I…Read more

]]> 7d7485628f9c98c823b305a780ad1863 pwr2all41998 replied to the topic New Taipan food in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-taipan-food/#post-257985 Sat, 27 Aug 2016 12:35:50 -0400 Yes, these pellets fit in the Taipan magazines..

]]> 63982b747aceb13f1f89a0d72bf29131 pwr2all41998 replied to the topic undocking the Mutant in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/undocking-the-mutant/#post-257403 Mon, 15 Aug 2016 01:11:25 -0400 You will if the magazine is still in there. I mainly do this with the single feed tray. I load a pellet, and de-cock while waiting for a critter. Once a pest shows up, simply re-cock, safety off and boom.

]]> 2fdd6dac9a9268d59dcc79543c715070 pwr2all41998 replied to the topic New gun bag for Mutant Std in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-gun-bag-for-mutant-std/#post-256054 Sun, 10 Jul 2016 00:51:36 -0400 Love this bag. It works really well. Much easier than a hard case, and much easier to pack into the car if you are going on a family trip. The muzzle pocket and Velcro strap help anchor everything really well. Worth the purchase. I do believe owners of the Taipan short would get their gun to fit in the smaller 5.11 covrt M4 shorty pack too.

]]> e65823cc9622ab49bb94ea9c1bd19a95 pwr2all41998 replied to the topic New gun bag for Mutant Std in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/new-gun-bag-for-mutant-std/#post-255927 Wed, 06 Jul 2016 03:52:58 -0400 Yes, it has a single shoulder strap, plus one carry handle on the side, and one on the top.

]]> d19b683e0a6257f22eb65a34c9cc083c pwr2all41998 replied to the topic weihrauch hw moderator in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/weihrauch-hw-moderator/#post-255661 Wed, 29 Jun 2016 16:43:30 -0400 These guys in AZ will sell Weihrauch LDC’s directly to you, and via their website. They have the .177/.22 versions as well as the .25 !!!

http://www.penchetta.com/store/air-guns/accessories.html?

]]> b6d3ea6563fd72914a7b5b206951d288 pwr2all41998 replied to the topic best pellet for taipan mutant standard 0.22 in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/best-pellet-for-taipan-mutant-standard-0-22/#post-255653 Wed, 29 Jun 2016 12:29:35 -0400 My standard loves the JSB 18.1’s and the Polymag shorts. Ragged holes at 50 yds. Not tried regular Polymags though not sureif they fit in the magazines.

]]> d7b1a5cdf7917ed03449bb82c382a83f pwr2all41998 replied to the topic In the UK today in the forum Off Topic https://talonairgun.com/forums/topic/in-the-uk-today/#post-255635 Tue, 28 Jun 2016 22:39:46 -0400 I’m a British ex-pat living in MN… This decision will have major repurcussions. My 401k over here took a dump of over $45grand overnight. I am a UK citizen and still have my passport and was denied the right to vote as I have lived out of the U.K. For more than 15 years. Sad that the youth were against the exit, yet the older folks in the…Read more

]]> 29a757b43b83201fd3e85a172a532806 pwr2all41998 replied to the topic Taipan standard oil at back of shroud in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-standard-oil-at-back-of-shroud/#post-254559 Tue, 07 Jun 2016 18:06:49 -0400 Yes, unscrew it a quarter turn. I was worried the set screw might gouge the barrel, but it didn’t. Inside the shroud where the set screw would come through is a rubber plug, so the set screw pushes that into the barrel to stop it moving. I used a 2mm hex key. Be careful though, undo it too far and it will gouge the air cylinder when you unscrew…Read more

]]> 3463f32568e6c3d06d5ffe5277c1aab0 pwr2all41998 replied to the topic Taipan standard oil at back of shroud in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-standard-oil-at-back-of-shroud/#post-254557 Tue, 07 Jun 2016 16:58:30 -0400 Ask and ye shall receive. I think it looks quite sharp as it is just a tad longer than the standard shroud, and the moderator is just a bit longer than the sunshade, by about 3 inches. The Weihrauch moderator appears to have the same gap between the air cylinder and moderator that the standard shroud did. With the standard shroud, the sunshade is…Read more

]]> 432ddae5a6bef1828a462b7fd4801cc7 pwr2all41998 replied to the topic Taipan standard oil at back of shroud in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-standard-oil-at-back-of-shroud/#post-254548 Tue, 07 Jun 2016 15:00:57 -0400 Just removed it. Cleaned it up…. While it was off, I also tried a Weihrauch LDC on it and found it was a little quieter than the stock shroud. It’s a little longer, but definitely quieter by 2 db’s on my iPhone db meter.

]]> 6403bc2b74964e2ba30833360c5b8be3 pwr2all41998 replied to the topic Taipan standard oil at back of shroud in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-standard-oil-at-back-of-shroud/#post-254536 Tue, 07 Jun 2016 11:30:22 -0400 Dry scuba air to fill from a Great White tank. Not a pump. So shroud removal is a simple unscrew, or remove the grub screw at the back of the left hand side of the shroud? Is feeling air come out the back of the shroud normal too?

]]> 6fbe570efb85b03c409d42804ae81ca5 pwr2all41998 replied to the topic Taipan mutant and Vulcan tactic .25 50yd groups in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-and-vulcan-tactic-25-50yd-groups/#post-254410 Sat, 04 Jun 2016 22:01:40 -0400 Ha!

]]> cf96256bfc23e4df191b6b5389af8036 pwr2all41998 replied to the topic My 1st STD that didn't require a doctors treatment in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/my-1st-std-that-didn-t-require-a-doctors-treatment/#post-254388 Sat, 04 Jun 2016 16:20:08 -0400 Congrats, that is a nice looking rig!!

]]> 735b73b072078eb415c582b06bc6ea8d pwr2all41998 replied to the topic Vulcan Carbon Fiber Sound Moderator in the forum Scopes, Sound Moderators, other accessories https://talonairgun.com/forums/topic/vulcan-carbon-fiber-sound-moderator/#post-254332 Fri, 03 Jun 2016 14:01:22 -0400 A striking resemblance to the Donnyfl shrouds… I am interested. Are they serviceable for cleaning, or glued and grub screwed together?

Thanks.

]]> 733ae059f5e7e32381d16551e5d50c70 pwr2all41998 replied to the topic Convince me NOT to get a bullpup Vulcan 25! in the forum Airgun Technology https://talonairgun.com/forums/topic/convince-me-not-to-get-a-bullpup-vulcan-25/page/2/#post-254250 Thu, 02 Jun 2016 04:05:56 -0400 But a Vulcan tuned to sub 12ft Ib’s would have an epic shot count, and in the hands of the the euro “lads” would kick arse.
My only gripe with the Vulcan Tactic is that it is a beast weight wise.

]]> a8bacdaf3a7d00f1c9df25449b2adc0d pwr2all41998 replied to the topic 25 caliber Mutant? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/25-caliber-mutant/page/2/#post-254248 Thu, 02 Jun 2016 03:46:20 -0400 For close range ratting or pesting under 30 yds, the .25 will be awesome. Even if it is at 700fps.

]]> 204fb7d3270411012beaaaecb347b330 pwr2all41998 replied to the topic Recommendations in the forum Springers https://talonairgun.com/forums/topic/recommendations-d14/#post-254052 Mon, 30 May 2016 15:50:13 -0400 I’ve never owned a gas spring rifle, but they seem to be fairly reliable these days. Anything Weihrauch, and you should be good to go. If a regular spring air rifle is something you are interested in, I know Airguns of Arizona has a deal on the Weihrauch HW95 which was $299, but went up to $315 last time I looked. That is a great deal on a great…Read more

]]> d91b5370d647163a7b6f8c81d35dfa5e pwr2all41998 replied to the topic Got my new Taipan Std! in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/got-my-new-taipan-std/#post-253962 Sat, 28 May 2016 01:35:37 -0400 Just shot my first bunny with it too!!!

]]> bfea6509b1af8182a9e6f065c069c5fa pwr2all41998 replied to the topic Got my new Taipan Std! in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/got-my-new-taipan-std/#post-253945 Fri, 27 May 2016 21:47:49 -0400 One picture before the rain came!!

]]> 3ecaef55b090f544fe67ddcc8aa6a340 pwr2all41998 replied to the topic Updated Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/updated-vulcan/#post-253927 Fri, 27 May 2016 14:59:32 -0400 As a former highpower powder burner shooter, these rails were used for mounting shooting slings and such. There are picatinny options that fit into the UIT rail without having to drill holes in the stock. You can also put in sling studs etc. The UIT tails are flush with the stock and allow many more options to mount stuff without destroying the…Read more

]]> 3c049831cfe855b57b91fdf33e7b5bf0 pwr2all41998 replied to the topic Updated Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/updated-vulcan/#post-253901 Fri, 27 May 2016 02:16:29 -0400 TDi made the bipod some years back. They no longer make this version now, but I bet they likely have the designs to re-do it. I do not know of other bipod brands that fit a UIT rail anymore. There is some TDi stuff on optics planet. Including a picatinny verison of the one I have. http://www.opticsplanet.com/tdi-arms-brand.html

]]> 10ecbccab2f7647e43d0dc189635bf27 pwr2all41998 replied to the topic Updated Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/updated-vulcan/#post-253869 Thu, 26 May 2016 17:38:59 -0400 The rail allows me to use this bipod made by TDi some years back….

Mounted to the Vulcan Tactic.

]]> 9c5c0f93b96beb89a905c47ad1baacd2 pwr2all41998 replied to the topic Updated Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/updated-vulcan/#post-253823 Wed, 25 May 2016 18:27:26 -0400 Nice hybrid stock! I love the UIT rail under the forearm of my Tactic. The rail was the main reason I did not get the bull-pup.
I think all bullpups should have a rail as they open up more options to fit accessories.

]]> d5af30900936d4323a17b81534b127ef pwr2all41998 replied to the topic Vulcan Tactical .25 cocking issue in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-tactical-25-cocking-issue/#post-252346 Tue, 03 May 2016 23:27:19 -0400 If it’s any help. My Vulcan tactic was hellish tough to push the bolt forward and seat the pellet. I have only put around 100 pellets through it, but it is way better already.

]]> 42bf690d6ba076f3c86f2a54b8337b6f pwr2all41998 replied to the topic Vulcan Tactical .25 cocking issue in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-tactical-25-cocking-issue/#post-252249 Mon, 02 May 2016 01:00:24 -0400 You need to put a few hundred shots through it before it starts to bed in and feel smoother. Mine is doing that too. Sometimes the bolt/probe does not seem to engage the pellet and let it seat well. It should get better.

]]> 4cf0a4793d90dc484a28f612db9b8066 pwr2all41998 replied to the topic Thread size at end of shroud in the forum Airgun Technology https://talonairgun.com/forums/topic/thread-size-at-end-of-shroud/#post-252131 Fri, 29 Apr 2016 23:53:14 -0400 The new Vulcan threads I hear are a M14x1.25 mm male thread. I know that you can get an adaptor from Topgun Airguns that screws on the end and then has a standard 1/2 x 20 UNF thread on the end of it.

]]> 9a3f43a17a1b2065df8a94f9bec6fb57 pwr2all41998 replied to the topic 25 Predator polymags in the forum Airgun Technology https://talonairgun.com/forums/topic/25-predator-polymags/#post-251771 Sun, 24 Apr 2016 22:20:32 -0400 Does any one know if the 3D printed Vulcan .25 single load tears on Ebay that a guy is selling, can fit the Polymags? I see know reason why they would not work?

]]> 81e42bdb4e6889467a78d348f726a693 pwr2all41998 replied to the topic My New Vulcan Tactic 25 Cal in the forum Airgun Technology https://talonairgun.com/forums/topic/my-new-vulcan-tactic-25-cal/page/3/#post-251451 Wed, 20 Apr 2016 20:20:48 -0400 The buttstock is way too square at the bottom.. My Tactic has a buttstock shape that follows the same as the shoulder pad you have.

]]> a607420a7dc2e6f3d27cb700fa7b719d pwr2all41998 replied to the topic Vulcan dovetail rail? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-dovetail-rail/#post-251091 Sat, 16 Apr 2016 13:18:45 -0400 I am thinking maybe something like this…. http://www.opticsplanet.com/leupold-20-moa-mark-4-ims-integral-rail-insert.html

Or http://www.usoptics.com/accessories-gear/adm-ad-recon-sw-30mm-20-moa-cantilever.html

Or… http://www.opticsplanet.com/dnz-products-freedom-reaper-forward-picantinny-rail-20moa-black.html

]]> 2e36608db4b6a42068526aad655462e2 pwr2all41998 replied to the topic Vulcan dovetail rail? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-dovetail-rail/#post-251086 Sat, 16 Apr 2016 12:55:50 -0400 I wonder if Airgun Technology could make a sloped picatinny rail similar to what is available to powder burners? Like a 20MOA rail…There are only 2 screws holding the existing rail on, and it would not take much to either grind the mount down with more angle, or have an option to have one made.

]]> 18c012498cc29c7d55b42007b0137266 pwr2all41998 replied to the topic Vulcan dovetail rail? in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-dovetail-rail/#post-250935 Thu, 14 Apr 2016 17:24:31 -0400 Thanks for the links.

]]> 3f027b2b7aa06daeaf4cb7667fea57bb pwr2all41998 replied to the topic Got my new Vulcan Tactic in .25 :-) in the forum Airgun Technology https://talonairgun.com/forums/topic/got-my-new-vulcan-tactic-in-25/#post-250901 Thu, 14 Apr 2016 12:31:45 -0400 Here are a few more pics of the TDi bipod. The long piece slides into the rail underneath, and has a built in swivel stud. Each of the legs fold back too. I like this set up better than a picatinny under rail that would stick out and ruin the lines of the stock. Each leg is adjustable, and there is a small amount of cant swivel in the yoke too,…Read more

]]> 3cb365d1ab50944f9782e6679eed626a pwr2all41998 replied to the topic Just common sence on company buyouts in the forum BullPup General Chat https://talonairgun.com/forums/topic/just-common-sence-on-company-buyouts/#post-250334 Tue, 05 Apr 2016 14:35:03 -0400 I have a similar ongoing issue with a TGAG purchase during the transition from Peter to Joe. I ordered a Vulcan tactic .25 on 03/19 and it shipped out to me on 3/22 and showed up on 03/26 what I got was a .25 Vulcan Bullpup not the tactic! So I called and spoke to Joe, he said I will be sent a return label via email and they would wait to send me…Read more

]]> c668cd7e7711615e715d025601c17220 pwr2all41998 replied to the topic Peter sold TGAG in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/peter-sold-tgag/page/2/#post-248956 Wed, 16 Mar 2016 19:04:31 -0400 I called PETR’s phone today to ask about when they will get the backordered .25 Vulcan Tactics in, and Joe answered….

]]>