Dougs e-mail Doug Noble (dyotat100@aol.com)

Thanks………….Yes and with AIR, only……Doug wants to come up and has helium to give MAX POWER with that>>> Another 50% fpe or close? Just to say we did it as have no intentions of SHOOTING with it.

Carl

I upgraded barrel. Stock Lothar was a decent barrel and shot on video CLAYS at 600 yds with it. After doing the 600 yd shoot, new barrel was in so removed stock bbl and never shot it again. I wanted a PREMIUM Barrel. Ordered a Krieger, with 1-26″ twist rate.…Read more

Thanks……..The boots are Redwing……I am retired for 16 years now. No bricklayer,…Read more

Tank is a 1000cc/1 Liter LUXFER 4500 psi Carbon Fiber. It takes a 2″ extension to screw into tank and valve into it to mount on Texan Frame. You can buy them to. I have a straight and angled extensions ……..I found it/them across the pond online…………Not sure where? They advertised that only 9 yrs left…Read more

Well they have the extensions………….I linked it TWICE and when I hit PREVIEW it was a lit up active in BLUE LINK………Hit submit and it goes away…..GOOGLE PCP TUNES and look for it, I found it……Don’t know why link didn’t work TWICE……..

Thanks Carl for the info!

You are welcome………….This angled adapter MAY work for 2 liter tank? Scope can come WAY BACK?? I have this angled adapter but have a straight adapter on TEXAN…Read more

Thanks Carl for the info!

You are welcome………….This angled adapter MAY work for 2 liter tank? Scope can come WAY BACK?? I have this angled adapter but have a straight adapter on TEXAN now, to get the…Read more

CF bottle is 1000 cc., or 1 liter………With valve at MAX pressure a 500 cc tank didn’t have enough air left to close the valve upon firing, as I do not use a return spring in valve and would DUMP TANK…..Doug Noble knew I had the 1 liter CF TANK and said to put valve in it and try shooting…Read more

Have you tried with lees weight to achieve different velocities?.

Yes I have tried different bullets down to 280 gr and from Max psi down to 3000 psi……I am concerned right now with the heavier bullets and best accuracy ………I think i even shot some Round Ball 143 gr at 2900-3000 psi and was like 1100 fps? Valve’s…Read more

Carl

GsT

Exactly right……..Sell them all day for $400 each :suprisedn:

Carl

You assume wrong. I use a STOCK VALVE that has been modified to pass more air. In fact I did have an AAO valve and springs. It didn’t pass as much…Read more

Thank You…….Used 165 moa (or -1381 inches) of my 300 moa scope rail. Energy of the 85 gr spitzer leaving muzzle at 1035 fps was 202 fpe. At 800 yds ballistic computer says 648 fps at 79 fpe.

Carl

Thanks, and YES, it is a very long way. Especially for AIRGUN….

Carl

Good luck on your endeavors……I have been shooting Powder for 67 years….and competing and…Read more

Look at the HAMMERING the 200 yd EBR target below this thread……..Using 85 gr Spitzer I cleaned target, all 10’s or X’s..Some persons are…Read more

Thanks………..How long a barrel did you get? Is it a TJ barrel?

Carl

Yes sir it is a long ways. Unless one has tried to hit something relatively small to the distance, at a lasered half mile, difficult to imagine how hard it really is. Or looking at target barely even visible to the naked eye………….Thanks for…Read more

Speed is FINE with…Read more

Thanks but I have gone LONGER in past 2 weeks, actually 3 times…….Haven’t posted video’s yet………

Thank you for the info. I have seen those tanks on one of the Chinese buying sites. What is the thread for that tank, it looks like it just screws right into the gun like the factory tank without any modifications.

Do you have the web site where you bought that tank ?

Thanks Carl,

wll2506

Yes it…Read more

Yes it is the SEB NEO……Have had it about 3 yrs or more. It is the Rolls Royce of Rests. Smooth as smooth can be. I use on the bench, I DID shoot F-Class and shooting prone is EASY to adjust while prone with the joy stick. Several shooter friends have them now after I got…Read more

Thank you for the info. I have seen those tanks on one of the Chinese buying sites. What is the thread for that tank, it looks like it just screws right into the gun like the factory tank without any modifications.

Do you have the web site where you bought that tank ?

Thanks Carl,

wll2506

Yes it is MADE for AIRFORCE and…Read more

Nice shooting but what gun, caliber, pellet, were you were using, and what was your velocity.

Without that info, your video does not mean much.

wll21506[/quote]

Thank You. I think it does mean a lOT, since it is posted on an airgun forum and in the CONDOR THREADS. No other airgun has done what i have posted these past 10 months!! I…Read more

Thanks Joe…………Click on my channel link in video explanations and go to bottom of page for PLAYLIST of AIRGUN LONG DISTANCE VIDEO’S………Much better ones and the one at 1065 yds where i stopped last fall…..ALSO THE SODA CANS at 700 yds……

Carl

Thanks for the comment………In case you missed the video that preceded above video=326 yds shot and hour earlier. Click low right corner of video for FULLSCREEN VIEW

All custom build. Just the purchased stripped AifForce Frame, which includes the trigger and breech/bolt……All else is sourced parts by me, and built by a gunsmith that builds WINNING 1000 yd F-Class Competition Rifles. And he does not build airguns. He has…Read more

Thanks………If you don’t have the room really don’t need one….But…Read more

When I went to the 421 yd Turkey….Didn’t put out camera till I shot and got elevation for the clays I put out…..Then went to turkey and here is a pic of 5 shots with a 72 gr slug. Measured 2″ @ 421 yds and…Read more

Your attachments at bottom as ALWAYS was ADD, BROWSE and from own computer. highlght and hit LOAD . It shows the file before you hit enter by name being loaded, but nothing comes up……..So it ISN’T so simple ………..I do not have pictures on PHOTO BUCKET..This website use to,…Read more

Thank You……..I put 2 clays out, and yes I broke them both…Had camera back in car and before loading up broke them. Yes the gun has retained power down range. If I could post…Read more

Thank You…….Wish we could post PICS but can’t anymore???? Could add interesting stuff…….
Thanks for comment.

Carl

And a lot better videoing of the event.

Thank You Sir, You, Cedric and Doug inspired me a year ago and did those above things last summer. I am on GTA now and completely built a new gun.Starting over and posted this thread there. Open thread and at 326 yds gun is shooting better than MOA.. I show some groups gun is…Read more

Thanks in advance!

Thanks. His Name is Tom Witt……He…Read more

I’m glad you got it made too! That .430″ group was with it and have several 1/2″ groups with it. That group is on Arsenal site pics ofo the mold. Jared asked if he could post it. I sent 4 others around 1/2″ but he used the one with Aspirin Tablet for comparisson ……Jared didn’t think I would have a problem keeping 5…Read more

I’m glad you got it made too! That .430″ group was with it and have several 1/2″…Read more

Mine was shipped 2 days ago………..Carl

Are the 90 gr LBT’s in Devo’s picture above the same ones you shoot from LBT? I had never seen a picture of them.

No they are not what i shot the long distances with…… Below a pic of the LBT 92 gr I used to 1000+ yds. .22 pellets for comparison.Click pic to enlarge

Carl