Talonairgun | rualert | Activity https://talonairgunforum.com/members/rualert/activity/ Activity feed for rualert. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 9a8b370e8b1b54dcfeb41025b855c218 rualert replied to the topic Talon Tunes and other custom one piece Top Hats in the forum Mods/Machinists https://talonairgun.com/forums/topic/talon-tunes-and-other-custom-one-piece-top-hats/#post-270075 Wed, 05 Jul 2017 00:04:33 -0400 I don’t have a picture of it at the moment, but I finally got it made, also managed to get the breech made, might have to cut it down a little more and cut another o-ring groove. By the way cutting those really sucks! Anyway after getting it together to the point where I could at least test fire it a few shots, It’s freakin loud. Reason I may have…Read more

]]> 3a629f8786062bf3d6c2c130aa335262 rualert replied to the topic 13ci Bottle with co2 adapter in the forum Talon/Talon SS https://talonairgun.com/forums/topic/13ci-bottle-with-co2-adapter/#post-266791 Wed, 01 Mar 2017 23:37:42 -0400 I’ve also done this with a 13 cu.in. reged at 1600 PSI in 22. Don’t remember how many shots, but it got a ton of shots before it fell off the reg. Nice consistent long strings. Just looked up the old spreadsheet and fond at 1600 PSI using the CO2 adapter and a 13 cu.in. averaged 733 fps for 18.1 ft.lbs. using JSB 18.1’s.

Casey

P.S. I can almost…Read more

]]> 9c1b1a2b64a237003d7fcf637b7174e8 rualert replied to the topic Case for Talon with 6"and LDC in the forum Talon/Talon SS https://talonairgun.com/forums/topic/case-for-talon-with-6-and-ldc/#post-266790 Wed, 01 Mar 2017 23:28:18 -0400 I have a Talon SS with the TT 6″ shroud, so I pull the shroud, and tank, then everything fits in a nice heavy duty back pack. It’s billed as a go type, bug out bag, but the gun, fill adapter, pellets, bullets, range finder, binos, and the rifle is scoped with a Hawk 4-16X50 I think side focus with the wheel and it all fits, and I can carry it just…Read more

]]> 1ab8542d21283155d91bed715c411228 rualert replied to the topic Need Talon SS info. in the forum Talon/Talon SS https://talonairgun.com/forums/topic/need-talon-ss-info/#post-266785 Wed, 01 Mar 2017 19:30:20 -0400 Try the Quick Reference Section for the schematic, along with just about everything else you can think of for the gun.

]]> f8d4f967c76634e62682cd531e8fc296 rualert replied to the topic Old school hammer upgrade??? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/old-school-hammer-upgrade/#post-266784 Wed, 01 Mar 2017 19:23:07 -0400 If my memory is correct the screws are simple 10-32 allen socket or “set” screws, I just picked up some extras for a new set of bushings and other items from both Lowes, and Home Depot. The short ones are I think 1/4″ and the longer ones were 1/2″ so easily found. As for you hammer issue, it doesn’t make sense that the newer hammer isn’t working…Read more

]]> 4e45a3964338b5bf1ceb1c1f331a1a19 rualert replied to the topic Has anyone done this??? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/has-anyone-done-this/#post-266783 Wed, 01 Mar 2017 19:16:45 -0400 Sorry for the short post yesterday, I was on a phone, and I suck at thumb typing. Anyway about the TT shrouds, I have I think the 6″ might be a bit longer one on my rig, and all you hear right now is the hammer and the pellet hit. Like mentioned previously very quiet, top notch, and workmanship is top of the line. Hope this help at least a little.

Casey

]]> 1781ce765c5fca3d629edcf99e03d2af rualert replied to the topic Has anyone done this??? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/has-anyone-done-this/#post-266760 Wed, 01 Mar 2017 00:39:32 -0400 I second the note on the shroud, they are very quiet. I have a Talon SS with both 22 & 25 caliber 18″ barrels. I run an R&L Condor valve so it will sling 21.1 22’s supersonic, and, can get the 25gr JSB 25’s there if turned too far up. You can get both down to reasonable speeds however.

]]> 7af8b26f3e1119f6ed05ea2fec59cde1 rualert replied to the topic Newbie in the forum General Chat https://talonairgun.com/forums/topic/newbie-d43/#post-264219 Fri, 06 Jan 2017 01:05:43 -0400 Welcome gentlemen, there is a ton of great info here, and many with deep knowledge about the platform. Try to search, and don’t forget the Quick Reference section as you will find many answers there as well. This can be a rough and tumble bunch, so as long as you can take a little abuse, and roll with it, you will fit in just fine. We take pride…Read more

]]> d3ffa14a152645a114b3d3f4f75e500b rualert replied to the topic Help please with valve leaking in the forum Talon/Talon SS https://talonairgun.com/forums/topic/help-please-with-valve-leaking/#post-257997 Sat, 27 Aug 2016 21:02:26 -0400 Someone posted previously about taking the valve seat piece (Black part the spring sit on) and cleaning the contact to the valve side with very light sandpaper after chucking it in a drill. Not enough to remove any material to speak of, just enough to rough up the surface a little bit, then re-assemble, fill and fire a couple of times. As for the…Read more

]]> 1d37396231e3b8b8fa22c3516a17c431 rualert replied to the topic Hammer weight on a standard tank in the forum Talon/Talon SS https://talonairgun.com/forums/topic/hammer-weight-on-a-standard-tank/#post-257996 Sat, 27 Aug 2016 20:52:54 -0400 I have tried this on my 22 Talon SS but I did the basic valve mod that should still be posted in I think it was the FAQ section with a title something like how to get your talon valve to open with a 3K fill? Anyway, I followed the instructions, basically just opening the stem up a little bit, then the inlet holes, and polishing all the stem bits…Read more

]]> df16d622f985bf9a3862c1af590e04c0 rualert replied to the topic Am I Correct ? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/am-i-correct/#post-257993 Sat, 27 Aug 2016 19:53:50 -0400 My Talon SS beast has the 18″ barrel, a TT shroud to keep the peace with the neighbors, Condor tank with R&L valve and will sling 49gr Hunter Supply cast slugs sized properly between 90-100 ft.lbs. It will hold groups nickle size and smaller at 50 from just plain old bags all day, and unless I turn it down it slings JSB KH supersonic. As long as I…Read more

]]> 215f9f22d18497d451007ab3eb5c3401 rualert replied to the topic Tank cover+ sling? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/tank-cover-sling/#post-257992 Sat, 27 Aug 2016 18:52:22 -0400 I have my rear sling stud in the but plate and it works just fine there.
Hope that’s at least a little helpful.

Casey

]]> 6c4688cc991918a818a80894d213c846 rualert replied to the topic February Give Away.... in the forum General Chat https://talonairgun.com/forums/topic/february-give-away/page/3/#post-246874 Wed, 24 Feb 2016 00:17:21 -0400 691

Casey

]]> 1995732798525c30d280f8e6dba50305 rualert replied to the topic #'s after ttqcth in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/s-after-ttqcth/#post-230336 Thu, 02 Jul 2015 18:51:43 -0400 Any update on your progress? I have a similar setup, and was able to finally get the Rat Snipers up above 1000 fps but had to raise my fill pressure to 3200 to get any kind of a shot curve. Was actually playing around this past weekend with the gun using the 28.4 gr H&N’s since PA was out of the 31 gr or heavier JSB’s and had a consistent string…Read more

]]> b6fa53478f830b7025a84eddbda1e99c rualert replied to the topic 12" barrel in the forum Talon/Talon SS https://talonairgun.com/forums/topic/12-quot-barrel/#post-229683 Thu, 25 Jun 2015 19:00:56 -0400 Without the strangled valve, the one time I dropped my 12″ .177 barrel in my SS it went supersonic until I put either a factory or even lighter aftermarket hammer in it. then I was able to de-tune it to around 550 – 600 FPS for some 10M shooting. If one were looking to do that type of shooting, I would suggest either the micro meter tank/valve…Read more

]]> 7eb7d66252ffb679bf94735130d43ce6 rualert replied to the topic New vs old in the forum General Chat https://talonairgun.com/forums/topic/new-vs-old-d83/page/2/#post-229680 Thu, 25 Jun 2015 18:44:46 -0400 I remember that the Condor valve has an o-ring in the stem portion of the valve body if I’m not mistaken, and the Talon valve body does not have the o-ring groove. Beyond that, you would have to ask Air Force, tony, R&L, or Dayotat I’m sure one of them can give you the correct answer. I personally did pen up, port, and mod one of my Talon valves,…Read more

]]> 1c3540d40cf3e95daed08ffaf71c9239 rualert replied to the topic CO2 tank adapter questions in the forum General Chat https://talonairgun.com/forums/topic/co2-tank-adapter-questions/#post-229666 Thu, 25 Jun 2015 16:16:02 -0400 Not sure on your questions specific to the CO2 adapter, as all I have ever used it for was a 1600 PSI regulated HPA bottle. However as to the Talon spring and hammer being able to open the Condor valve, I would say yes, because my Talondor has obviously a Condor valved tank, and I generally run the PW at 6.0 with the condor hammer weight added.…Read more

]]> 479acfac7825521baf3fe2d6491bcdd9 rualert replied to the topic Freedom 8 Silicone lube? in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/freedom-8-silicone-lube/#post-228078 Sat, 06 Jun 2015 03:22:32 -0400 Just to clarify I’m looking for an equivalent silicone oil used in the new auto oiling system. I’ll check their board as someone suggested, but will either post the answer here in case anyone else needs it, or if someone beats me to it, that will also get the answer here for all of us.

These kids can go through some air, more than I do per week,…Read more

]]> 17dc6a16214212ae2880cae7a3c6130b rualert replied to the topic Qusetions On Older Talon SS Maint. & Upgrade in the forum Talon/Talon SS https://talonairgun.com/forums/topic/qusetions-on-older-talon-ss-maint-amp-upgrade/#post-227338 Tue, 26 May 2015 00:28:28 -0400 Any Scuba shop that does hydro testing can have the tank tested if you wish. If you have an air supply, (Scuba, SCBA tank) you can simply fill and go. The tanks are just over the size that does not require testing, and there are many of these tanks out there that are quite old, and may have never been tested. Not saying you shouldn’t, always…Read more

]]> 0b3d01863c3d7bec4970b0c5f8c6b52b rualert replied to the topic Air Force condor cleaning in the forum General Chat https://talonairgun.com/forums/topic/air-force-condor-cleaning/#post-218063 Mon, 26 Jan 2015 22:29:31 -0400 I use Goo Gone soaked patch or two, then dry patches when accuracy starts to go. Only time I clean mine, this is what I do with all my air guns, and so far it’s worked great. I also coach a 4-H youth shooting team, and we use the same method for cleaning the competition rifles and pistols. If they get cleaned, they they get at least 40-50 pellets…Read more

]]> cac33b41c6612cd2d6db50b8a61ebcfc rualert replied to the topic Received my new Condor in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/received-my-new-condor/#post-205358 Wed, 25 Jun 2014 19:39:22 -0400 There are a couple of ways you can reduce the velocity,first check the power wheel (spring pre-load adjuster) if above 0 turn it down to start with, next trick many have had success with is placing a small o-ring behind the top hat, and the top option would be a Talon Tunes once piece top hat with the screw in restricters. They allow you to…Read more

]]> bb95e8833843b022ba0d4b680f024173 rualert replied to the topic Need Advice: Convert Talon SS to Talondor in the forum Talon/Talon SS https://talonairgun.com/forums/topic/need-advice-convert-talon-ss-to-talondor/page/2/#post-202375 Wed, 23 Apr 2014 20:32:35 -0400 Do you have a Chrony? I would start with maybe a 2200 – 2400 PSI fill, then see what speed the gun is shooting. Add a little more pressure say 50 -100 PSI at a time until you see it drop velocity. Or you can go the other way, fill to 2800-3000 then shoot till it starts to rise, find the sweet spot. This will be where you start getting multiple…Read more

]]> 98ba5751e383a084967bacb8264da0d9 rualert replied to the topic Jerry's 6-ring slugs in the forum General Chat https://talonairgun.com/forums/topic/jerry-s-6-ring-slugs/#post-201862 Tue, 15 Apr 2014 02:12:52 -0400 I have also had very good results with the good old stand by JSB 25.39’s but I’m shooting from an 18″ barrel. Hopefully it’s still in the Quick Reference section, there was a quick and simple Talon valve mod, which I did on mine. Maybe someone else can point it out, since I can’t seem to find it right now, but basically opened up the stem to 1/8″,…Read more

]]> da627ad10eef311762a848714471cbf4 rualert replied to the topic Hi I'm new to airforce air guns. in the forum General Chat https://talonairgun.com/forums/topic/hi-i-m-new-to-airforce-air-guns/#post-201633 Fri, 11 Apr 2014 23:48:33 -0400 Welcome to the mad house. You will find a great group of friendly, helpful people here. Just make sure you have a thick skin, we can get a little rough around the edges sometimes, just part of what makes this forum so much fun.

Casey

]]> 71fa3b4b006ddba0d73b1af7c76d6af4 rualert replied to the topic Hi from the new guy in the forum General Chat https://talonairgun.com/forums/topic/hi-from-the-new-guy/#post-201377 Tue, 08 Apr 2014 21:27:47 -0400 First welcome to the mad house. Next as for your 177 barrel, once you get the Talon Tunes Top hat use the smallest insert, and check to see if Tony has a light weight hammer, or simply remove the hammer weight from your stock gun if you don’t have a one piece after market hammer, then turn it all the way down to start with. I have a Condor valved…Read more

]]> 73e951177cd2b657e13cadbdf5ba0a01 rualert replied to the topic finally in the forum Benjamin Marauder https://talonairgun.com/forums/topic/finally-d26/#post-200769 Wed, 02 Apr 2014 17:45:16 -0400 Bravo, I too have been waiting for this to come to life here. Tired of all the crap on the Yellow.

]]> 94ecb25e47e387f2d08b0c16fd7810ec rualert replied to the topic Older Talon SS Barrel Bushing in the forum Talon/Talon SS https://talonairgun.com/forums/topic/older-talon-ss-barrel-bushing/#post-200765 Wed, 02 Apr 2014 17:30:28 -0400 Or if you want just vent the front bushing using a cordless drill and a drill bit. Be careful not to hit the barrel, I did this on my original 22 barrel as it too had the plastic bushings. Worked out just fine.

Casey

P.S. It is a lot simpler to drill out the removable bushings, but drilling the plastic ones is very easy, you could even do it by…Read more

]]> c6b8238b481d613590ac6bb3acc12f96 rualert replied to the topic New Frame Design? in the forum General Chat https://talonairgun.com/forums/topic/new-frame-design/#post-200006 Wed, 26 Mar 2014 02:53:52 -0400 I think it would be great if we could get a good detailed drawing to Tony that expands on the TT Wok guard and creates a “chassis”, think something like the MDT TAC21 type for Remington, and Savage actions that would allow the use of an AR style butt stock, lower weaver, or similar lower and upper rails. Think the rails could be ad-ons, that maybe…Read more

]]> f87324ea39b30e48bb0db7fafbba7184 rualert replied to the topic Talon SS vs Condor SS accuracy out to 50yrds? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-vs-condor-ss-accuracy-out-to-50yrds/page/2/#post-194845 Mon, 10 Feb 2014 23:57:35 -0400 Ok, maybe this will help a little. I have two Talon SS’s, one runs either a TT tuned talon valved bottle, or my DIY modded talon valve, it generally wears an 18″ 22 caliber barrel. The other one has an R&L modified Condor valve and generally wears a 25 caliber barrel, but I have had the 22 barrel in it too. At 50 yards they both shoot great shot…Read more

]]> 70f5bf4cc861212eead41afcc087631c rualert replied to the topic Talon SS in .177 in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-in-177/#post-194166 Wed, 05 Feb 2014 19:09:21 -0400 My first Talon SS came as a 22, with a spare 177 barrel. When I swap in the 177 barrel, I also put in a lighter hammer, and generally have to turn it down to get it below the 1K FPS mark. Once in its sweet spot, it will drill 10M bulls one after the other, and pushing out to 30 yards, it still stacks them. I have taken tree rats at 40 – 45 yards…Read more

]]> 04ca62c58af9b68c205b1ffaa604034e rualert replied to the topic 3rd Evolution in AAA Condor... in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/3rd-evolution-in-aaa-condor/page/2/#post-194142 Wed, 05 Feb 2014 17:10:07 -0400 quote PANDEMIC:Hand carver and he stands behind his product for life

Sent from my Samsung Galaxy S4

I actually made one following the same lines,and it took me two weeks just to get close. This was an experiment just to see if I could make one, and if I would like it after before dropping the coin for the real deal. Well, mine is ugly as hell,…Read more

]]> 4c269c7d8e1f6d2b95207dc7f31207f6 rualert replied to the topic The Benjamin Marauder .25 in the forum Other Guns https://talonairgun.com/forums/topic/the-benjamin-marauder-25/#post-191506 Fri, 17 Jan 2014 22:15:46 -0400 I totally forgot about that, yes there are tube extensions, and Talon Tunes does tunes for the M-Rods.
Thanks for the reminder benneeb0y,

Casey

]]> 307bcf95194845720832a42f558fc940 rualert replied to the topic The Benjamin Marauder .25 in the forum Other Guns https://talonairgun.com/forums/topic/the-benjamin-marauder-25/#post-191493 Fri, 17 Jan 2014 21:06:58 -0400 You can very likely squeeze a few more shots per fill by simply adjusting and fine tuning the stock rifle, that is unless your after max power. Mine came out of the box shooting right at 45 FT.LBS. and I first turned it up a bit, then ended up going down to right in the 37-38 FT.LBS. range which gave me about 4-5 more usable shots. I have seen…Read more

]]> d7a733759e9db33db08a7235aae49f57 rualert replied to the topic Talon ss with 18" barrel and high flow tank in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-with-18-quot-barrel-and-high-flow-tank/#post-191478 Fri, 17 Jan 2014 18:41:22 -0400 I know they are all different, but mine went an average of 1078FPS with a 2800 PSI fill and the PW set at 3, (25 cal) backed the PW down to 0 and it was still hovering right at 1000. I will need a lower fill pressure, or just use heavier pellets. Those number were with 25.4 JSB’s. I was able to slow it down without reducing the fill pressure by…Read more

]]> f6ce91df9350708a6937926528ed2623 rualert replied to the topic Any interest in a group buy for custom bullet molds? in the forum General Chat https://talonairgun.com/forums/topic/any-interest-in-a-group-buy-for-custom-bullet-molds/page/4/#post-190208 Thu, 09 Jan 2014 00:55:32 -0400 Please let us know what the cost of the mold will be, and if we can get a discount if we order more than X number. This would be a good way for me to start casting until I get myself a 257 barrel, and the proper mold for that.

Casey

]]> 28280219ab20054d01f57fd4ae5e1667 rualert replied to the topic Hey all.. in the forum Talon/Talon SS https://talonairgun.com/forums/topic/hey-all-d8/#post-189049 Sun, 29 Dec 2013 21:52:38 -0400 I’m not quite there yet on the slug shooting, but the consensuses seems to be the 257 is the sh!t. All the guys are using TJ’s barrels from Dyotat100 (Doug), or R&L, I have read here that if you order one from R&L to tell him up front to please cut the breech to accept the cast bullets. So from the 257 page it seems one needs a barrel, one hell of…Read more

]]> 7803a20533cb439af2542a95ba8b84b1 rualert replied to the topic Okay for you math and or air tank gurus... in the forum General Chat https://talonairgun.com/forums/topic/okay-for-you-math-and-or-air-tank-gurus/#post-188846 Sat, 28 Dec 2013 02:40:29 -0400 That would be interesting to me too, as I’m kinda in the same boat, just haven’t dropped for the 4500 tank yet.

]]> 6f9ea383fee87467c0488b6670576fb9 rualert replied to the topic Best place to buy pellets in the forum General Chat https://talonairgun.com/forums/topic/best-place-to-buy-pellets/#post-188845 Sat, 28 Dec 2013 02:37:01 -0400 Doesn’t PA own Airgun Depot?

]]> ced044d7fede6e89b563e21554ec00aa rualert replied to the topic Okay for you math and or air tank gurus... in the forum General Chat https://talonairgun.com/forums/topic/okay-for-you-math-and-or-air-tank-gurus/#post-188828 Fri, 27 Dec 2013 23:45:55 -0400 I’m not the correct one to answer this specifically, I would imagine however that due to the increased volume in the 4.5K tank, tethered to your rifle and only filled at the time to 3100 PSI may have created a slight misconception on the number of available shots. Don’t quote me, I may be completely wrong, and way off the mark. One way to get a…Read more

]]> dd3aa50e1994b7614b009b45cf4bd59c rualert replied to the topic Post Christmas presents here in the forum General Chat https://talonairgun.com/forums/topic/post-christmas-presents-here/#post-188800 Fri, 27 Dec 2013 18:36:56 -0400 quote evazejip:quote PANDEMIC:Well that’s all that counts

Sent from my Samsung Galaxy S4

Amen.

I too agree, amen, and my kids had a ton of fun too, not to mention SHMBO is very happy too. Anthing they decided to bless me with is just icing on the cake.

Casey

]]> 34943b16ed50be408eb0f92207a8a025 rualert replied to the topic anyone shooting a 257 with a extreame valve from r and l in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/anyone-shooting-a-257-with-a-extreame-valve-from-r-and-l/page/3/#post-188728 Thu, 26 Dec 2013 22:20:43 -0400 Well Knife, Doug, Old Goat, and 80 Grit, I might just be begging for some slugs to test soon. I got one of my Christmas presents, a new R&L valve, which seems a bit hot for all the 22 pellets I’ve tried so far. Tomorrow will be the 25 cal tests, but I have a suspicion a 257 barrel is on it’s way. Once I find the slugs it like, hoping they will be…Read more

]]> 18549ca6e9065a88d18972a2f9df5057 rualert replied to the topic Post Christmas presents here in the forum General Chat https://talonairgun.com/forums/topic/post-christmas-presents-here/#post-188719 Thu, 26 Dec 2013 21:04:35 -0400 Well, my wife bought me an R&L Extreme Valve. Guess I don’t need to buy/build a Condor valve now! Sorry no picture, I had a spare tank, so it went straight into that tank, and with only 2800 PSI fills, one for the new tank, and a top off for my modded Talon valved tank, fired two 5 shot sets over the chrony. Well, with the PW set at 3.6 which is…Read more

]]> 75be801ac8f9a50b778bf230ad15fe57 rualert replied to the topic MERRY CHRISTMAS EVERYONE....... in the forum General Chat https://talonairgun.com/forums/topic/merry-christmas-everyone/#post-188504 Tue, 24 Dec 2013 23:01:08 -0400 Merry Christmas, and Happy New year to everyone. I greatly appreciate the TAG, and all the posts, information, and help you all have provided.

Casey

]]> 58d27e371fab0ff5d291c82525846316 rualert replied to the topic Talon- My old lady in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-my-old-lady/#post-187895 Sat, 21 Dec 2013 00:15:03 -0400 Nice gun, shroud looks like a Bullseye frame extender, maybe stuffed with goodies?

Casey

]]> 74baa28b83e012ee79ce0ef7216b70a2 rualert replied to the topic anyone shooting a 257 with a extreame valve from r and l in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/anyone-shooting-a-257-with-a-extreame-valve-from-r-and-l/page/3/#post-187676 Fri, 20 Dec 2013 02:22:15 -0400 Tof, I did a search, and it seems I’m a brick head sometimes, it was in one of he 257 pages, and had just the info I was looking for about temps. Need to finish reading the whole thing, so I understand the casting process. Been searching for a mold, might have found an older Ideal single, that might be just the ticket to have milled down to the 60…Read more

]]> f8eff2eff6575edfa308be389b06dd9c rualert replied to the topic JB Bore Paste in the forum General Chat https://talonairgun.com/forums/topic/jb-bore-paste/#post-187663 Fri, 20 Dec 2013 01:18:19 -0400 Thanks for the tip, I have seen some info on this, but it’s good to hear from others with these rifles before jumping in.

Casey

]]> 588e1bf36b4796b654d21fba784b2b05 rualert replied to the topic Getting a Talon into Canada? in the forum General Chat https://talonairgun.com/forums/topic/getting-a-talon-into-canada/#post-187660 Fri, 20 Dec 2013 01:15:53 -0400 Don’t ship one to Canada for legal reasons, they are not allowed to have shrouded guns, and without a specific type of license, or permit they are regulated to a specific FPE of output. I am not a lawyer, but I would double check as I don’t know the exact legal issues, but CYA.

Casey

]]> ee7ded1e2afd53dd9cc135ab0ab49a68 rualert replied to the topic New guy Making a 257 Condor in the forum General Chat https://talonairgun.com/forums/topic/new-guy-making-a-257-condor/#post-186714 Sat, 14 Dec 2013 19:42:05 -0400 First, welcome to the TAG. Next, please keep us updated, I am very interested in your project, as this is also on my next to do list. I only have a Talon SS, but since I have two, one is my multi cal gun, the other is currently setup as a 10M 177 rifle. Good luck on your project, and Tof, thank you for gathering all the info and posting it here…Read more

]]> 7fb6063af8ebe9177d674018b55d9a27 rualert replied to the topic Talon SS with 18in or 24in barrel...help ! in the forum General Chat https://talonairgun.com/forums/topic/talon-ss-with-18in-or-24in-barrel-help/page/2/#post-186710 Sat, 14 Dec 2013 19:28:06 -0400 OK, had to dig up some old Excel data, found the following: 25 Cal JSB 25.39gr 18″ barrel, Talon valve before any mods to it, PW set at 7, fill pressure 2800 PSI, 10 shot average 815.50 FPS, for 37.5 ft.lbs. with a standard deviation of 16 FPS. American Bloodnob valve, 2900 PSI fill: 25 cal JSB 25.39 gr, Average velocity 962 FPS, for 52.19 ft.lbs,…Read more

]]> b21a0ddfab34ba18e099acb4d82a223d rualert replied to the topic Talon SS with 18in or 24in barrel...help ! in the forum General Chat https://talonairgun.com/forums/topic/talon-ss-with-18in-or-24in-barrel-help/#post-186562 Fri, 13 Dec 2013 22:33:37 -0400 I have an SS with 177, 22, and 25 cl barrels, in 22, and 25 I have 18″ barrels, and with a lightly modded Talon valve I can still get into the upper 800’s in 25 cal, making 45+ ft.lbs. It also wears a Talon tunes 6″ shroud, which I think is perfect for the setup, all I hear is the mechanics, the neighbors don’t even look over my way anymore, as…Read more

]]>