Talonairgun | shooter58 | Activity https://talonairgunforum.com/members/shooter58/activity/ Activity feed for shooter58. Thu, 09 Jul 2026 01:06:06 -0400 https://buddypress.org/?v= en-US 30 hourly 2 946cdbadf11561e192cf0be7a698e9aa shooter58 replied to the topic 7075 aluminum tube in the forum General Chat https://talonairgun.com/forums/topic/7075-aluminum-tube/#post-200394 Sat, 29 Mar 2014 23:37:41 -0400 Sorry, I thought I had seen it there, but they don’t have it. My mistake…

]]> 03ae42f97d58a0e419ff943169182bee shooter58 replied to the topic 7075 aluminum tube in the forum General Chat https://talonairgun.com/forums/topic/7075-aluminum-tube/#post-200387 Sat, 29 Mar 2014 20:58:16 -0400 McMaster.com speedy shipping,will sell small quantity.

]]> e4a9429517f51ea253c01e6312b5b51a shooter58 replied to the topic Adjustable top hat plus regulator ? in the forum General Chat https://talonairgun.com/forums/topic/adjustable-top-hat-plus-regulator/page/2/#post-200279 Fri, 28 Mar 2014 16:30:46 -0400 No, I don’t have the adapter or anything, just the reg in the bottle and the valve screwed into the reg. I had Kings running at 900 FPS, but now have them at 885, which some say is ideal. It’s just about perfect for my type shooting, anyway.

]]> 6156d34d7329c6aa4c4a2b719abf810f shooter58 replied to the topic Adjustable top hat plus regulator ? in the forum General Chat https://talonairgun.com/forums/topic/adjustable-top-hat-plus-regulator/page/2/#post-200277 Fri, 28 Mar 2014 16:14:10 -0400 My reg is set at about 1800 PSI. I am running it at 43 FPE I think. Plenty of whack and a good number of shots. I have the power wheel set at zero and have Tony’s hammer in it. These things do seem to have quite a bit of individuality in how they want to be set up. I haven’t got a setup to directly measure the reg output, I just noticed where I…Read more

]]> 543cf9d2b0120c3c6f14528d78057323 shooter58 replied to the topic Adjustable top hat plus regulator ? in the forum General Chat https://talonairgun.com/forums/topic/adjustable-top-hat-plus-regulator/#post-200226 Thu, 27 Mar 2014 22:18:31 -0400 I sometimes used an O-ring under the tophat before I got the regulator. It seemed to do pretty well. I haven’t tried it since, but think I will give it a whirl when I get back home. It is just so easy to want to add more goodies to my Condor. I have Tony’s hammer, the Altaros reg, and WOK’s add-on bits. It is quiet, accurate, and powerful in .25…Read more

]]> 77b295fd61f2a5ef3840f9f7efe09ca4 shooter58 replied to the topic Adjustable top hat plus regulator ? in the forum General Chat https://talonairgun.com/forums/topic/adjustable-top-hat-plus-regulator/#post-200053 Wed, 26 Mar 2014 16:32:01 -0400 I guess I need to thoroughly investigate the O-ring solution before throwing more money at the problem. Thanks for the input…

]]> 520ca8406fb02d734afb650bd78766d7 shooter58 replied to the topic Talon for benchrest in the forum General Chat https://talonairgun.com/forums/topic/talon-for-benchrest/#post-199793 Mon, 24 Mar 2014 13:12:33 -0400 I still have it, had it installed last fall for a bit. The “boolits” are stabilized well with the 1 in 12″ twist but I need to have the barrel worked on by my gunsmith. I had trouble seating the boolits well, took more force than I liked, so I decided to fix it. I didn’t do as well as I thought I would, so I need him to fix my “fixin”, which I…Read more

]]> f3bd54e79f9f2091e3e0a152c91c0f03 shooter58 replied to the topic Adjustable top hat plus regulator ? in the forum General Chat https://talonairgun.com/forums/topic/adjustable-top-hat-plus-regulator/#post-199693 Sun, 23 Mar 2014 03:01:04 -0400 I have used an O-ring under the tophat before, works pretty good. I think I want one of Tony’s adjustable tophats though, it should be more consistent. I run my power wheel at zero so I can’t reduce power that way.

]]> 7a74c3ad4a0d0df07c89bc5b57908159 shooter58 replied to the topic Talon for benchrest in the forum General Chat https://talonairgun.com/forums/topic/talon-for-benchrest/#post-199169 Tue, 18 Mar 2014 14:47:16 -0400 I have an Altaros regulator in my Condor and it does a great job. I get 42 shots @ 42 FPE with a variation of 5 FPS or so. If I dropped the power I could get quite a few consistent shots. The reg did set me back $180 but the Condor is in effect several rifles in that I can configure it to suit the task. The reg only adds a little over an inch to…Read more

]]> 28c4a9db67636224f341c1ddd426b803 shooter58 replied to the topic .22 cal 43 gr hollow points revisited in the forum General Chat https://talonairgun.com/forums/topic/22-cal-43-gr-hollow-points-revisited/#post-132960 Wed, 27 Apr 2011 21:08:07 -0400 I considered a 1 in 9″ twist, but the online stability calculator said that 1 in 12″ would stabilize the 1/2″ long bullets down to 500 fps. I don’t remember all the details, but there was a slight $$ advantage to the 1 in 12″ twist, so that tipped the scale. It does a good job at 800 fps. My Condor came as a .177 so I’m wondering how much more…Read more

]]> 3a58d9c1caab06126969594df0955ecb shooter58 replied to the topic Barrel renewal in the forum Mods/Machinists https://talonairgun.com/forums/topic/barrel-renewal/#post-132878 Tue, 26 Apr 2011 18:52:37 -0400 Step 1 & 2 should correct the problem, and if it’s a small ding, it won’t likely make such a change that step 3 need be done.

]]> 5366551762e3e896f92ef2fed8ffba27 shooter58 replied to the topic .308 Sledgehammer project complete in the forum Mods/Machinists https://talonairgun.com/forums/topic/308-sledgehammer-project-complete/#post-127859 Sun, 06 Feb 2011 23:05:39 -0400 Looks nice ! Thumper, that one… what ya gonna thump with it ?

]]> 87681b956b854351c0bd09ab93d433f2 shooter58 replied to the topic Anyone selling .223 Conversion Kits? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/anyone-selling-223-conversion-kits/page/2/#post-127666 Wed, 02 Feb 2011 22:56:17 -0400 Thanks… I will send it off tomorrow, shouldn’t take them long to get it back.

Cold wind blowing here, wouldn’t be out shooting anyway.

]]> 94c3e6527b6ccbcf0ddb0892b179c921 shooter58 replied to the topic Anyone selling .223 Conversion Kits? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/anyone-selling-223-conversion-kits/page/2/#post-127601 Tue, 01 Feb 2011 21:43:39 -0400 Well, I must have offended the airgun genie, because as soon as I got everything together to have my shooting session, I discovered that my Condor tank had gone flat and won’t hold air. I need to send it to AirForce I guess. Maybe it will be under warranty… if not, it can’t be too bad anyway.

Tried to call the number I had for AirForce, and…Read more

]]> bb4ac19b35c7b695a8334c1b14005104 shooter58 replied to the topic Anyone selling .223 Conversion Kits? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/anyone-selling-223-conversion-kits/#post-127236 Thu, 27 Jan 2011 03:16:36 -0400 He casts them at .224 and then runs them through a die to size them for the Condor barrel. He had three diameters to allow for variations in bore size. I had all three sizes but that didn’t matter, twist rate was more important. I expect to have the barrel and a fresh supply of .224 bullets tomorrow. The weather is to be nice here this…Read more

]]> f5ce33ad3965365014f30a9a93b4ef71 shooter58 replied to the topic Anyone selling .223 Conversion Kits? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/anyone-selling-223-conversion-kits/#post-127164 Wed, 26 Jan 2011 12:31:41 -0400 I don’t have the BC as of yet. I can use chairgun to get it, when I start testing. I have had some of the bullets and tested them using the standard barrel. The results of that testing led me to getting the faster twist barrel. The bullets are some of Robert Vogel’s soft cast hollow points. They look very good and with the new barrel, I…Read more

]]> debff3e27cca5bdf3486648bb889d215 shooter58 replied to the topic Anyone selling .223 Conversion Kits? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/anyone-selling-223-conversion-kits/#post-127116 Tue, 25 Jan 2011 20:25:25 -0400 I have the stock Condor valve but may look for a “super valve” depending on my results. I don’t need lots more raw power than I’m getting, the hope is to get better long range performance due to the better BC of the bullets. My Condor isn’t maxed out power wise, so I expect it will push the bullets to an acceptable velocity if I add hammer…Read more

]]> 1a104fb54e61cec77f41a3f7e54d6cc6 shooter58 replied to the topic Anyone selling .223 Conversion Kits? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/anyone-selling-223-conversion-kits/#post-127055 Mon, 24 Jan 2011 22:07:03 -0400 I have a barrel about 26″ long with a 1 in 12″ twist rate. The available calculators say this should stabilize a .223 dia 40 to 45 gr cast bullet all the way down to 500 fps. I ordered it from Shilen Barrel Co. as a .750″ dia blank and got it turned to fit the Condor.
I am getting some more of Bob Vogel’s 43 gr hollow points. I tried them…Read more

]]> ca029429761e10d9832340beea96849a shooter58 replied to the topic Anyone selling .223 Conversion Kits? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/anyone-selling-223-conversion-kits/#post-127022 Mon, 24 Jan 2011 12:21:26 -0400 I’ll be evaluating a .223 barrel in a few days… in a Condor, and shooting soft cast bullets. When I have results I’ll post them.

]]> 4f615b0c92bf9e2c7050e057d68b82ae shooter58 replied to the topic Use of .177 Condor tank with a .22 24" barrel? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/use-of-177-condor-tank-with-a-22-24-quot-barrel/#post-124504 Mon, 13 Dec 2010 17:25:33 -0400 The 16 gr Eun Jin’s pack a wallop. I like the fact that I get more pellets for the same money. My Condor is the only .177 I have that will handle them. That little bit of lead will do the job waay on out there.

]]> ec7002d02a7f0cae666c41b0fafd25cd shooter58 replied to the topic Use of .177 Condor tank with a .22 24" barrel? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/use-of-177-condor-tank-with-a-22-24-quot-barrel/#post-124451 Sun, 12 Dec 2010 22:33:29 -0400 I probably wouldn’t lose too much accuracy at short range going supersonic, but I prefer to keep it quiet. I usually shoot 900 – 950 fps and it does well at any range I’m used to shooting… 100 yards or less, typically 40 – 60 yards.

]]> 049a626f77cf9f507d0ca8d798e72977 shooter58 replied to the topic Use of .177 Condor tank with a .22 24" barrel? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/use-of-177-condor-tank-with-a-22-24-quot-barrel/#post-124174 Thu, 09 Dec 2010 20:34:41 -0400 It will send .22 kodiaks supersonic if I crank it up, does around 1000 fps with 28 gr Eun Jin heavies. I found a point for the top hat which works ok with either .177 or .22 though I may not be getting the absolute max out of it. I’ve never had a tank dump or any problems at all for that matter. In .177 I just shoot the 16 gr Eun Jin’s and they do fine.

]]> 0a199781268e580b4c93eae7128b8901 shooter58 replied to the topic So what other black guns do you guys have? in the forum General Chat https://talonairgun.com/forums/topic/so-what-other-black-guns-do-you-guys-have/#post-122554 Sun, 14 Nov 2010 19:08:20 -0400 Superswift, Typhoon, Verminator. Thinking about putting bed liner on my 35 stock as I broke it at the wrist and repaired it years ago, so it’s not too pretty anyway.

]]> 612088e2729369e40fbab44e840e39fa shooter58 replied to the topic Who's using Bob Vogel's 43 gr .22 cal hollow points ? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/who-s-using-bob-vogel-s-43-gr-22-cal-hollow-points/#post-121593 Sun, 31 Oct 2010 00:52:12 -0400 They’re here…http://mrhollowpoint.com/6722.html

]]> 54cd4f6575ea675b528a09385e97f789 shooter58 replied to the topic Who's using Bob Vogel's 43 gr .22 cal hollow points ? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/who-s-using-bob-vogel-s-43-gr-22-cal-hollow-points/#post-121575 Sat, 30 Oct 2010 22:27:07 -0400 Windy today, but no rain & nice temps so I went back for another trial. I shot two groups of five shots and a bunch more at reactive targets, beer cans & milk jugs full of water. These things are a bit pricey for shooting groups. All shots were at 60 yards in wind blowing 15 mph and gusting to 20+ mph according to our local weather guy. One…Read more

]]> 803dca582613a9d12d08f29cddeffcf9 shooter58 replied to the topic Who's using Bob Vogel's 43 gr .22 cal hollow points ? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/who-s-using-bob-vogel-s-43-gr-22-cal-hollow-points/#post-121244 Mon, 25 Oct 2010 21:51:34 -0400 I tried a few 43 gr bullets in the Sumatra and it was a waste of time. I checked the Condor with a couple of Eun Jin heavies… right on. I had two quart milk jugs and 8 coke cans full of water about 60 yards away. I shot one of each with the heavies for reference and switched to the 43 gr hollow points. I took a shot at a mud bank to see how…Read more

]]> b37c0055581a901ce7e6943f63bca664 shooter58 replied to the topic Friendliest Air Gun State? in the forum General Chat https://talonairgun.com/forums/topic/friendliest-air-gun-state/page/2/#post-101365 Sat, 06 Mar 2010 13:18:06 -0400 Airguns are legal for small game in Tn. The varmint types are no season, no limit. There isn’t a cal or fps restriction posted on the regs. We can even hunt on Sunday… I used to live in NC and you couldn’t hunt on Sunday. I used to go down to the river on Sundays and shoot sycamore balls… ideal sized targets, explode nicely when hit. One…Read more

]]> 2a6af6bacb7eecd0e6be50e7408c098a shooter58 replied to the topic Which Airforce guns do you own? in the forum General Chat https://talonairgun.com/forums/topic/which-airforce-guns-do-you-own/#post-101298 Fri, 05 Mar 2010 19:37:16 -0400 Had an SS for a few years and liked it. I sold it at Roanoke and got a Condor, 12″ .22, 24″ .22, 24″ .177 & 24″ .25 barrels for it. I had a gunsmith thread them for a suppressor. I don’t foresee parting with it… very good for hunting.

]]> 36e64dc1b1b09732755ace901a27eb3f shooter58 replied to the topic would the barrel take an 1/2"unf thread ? in the forum Mods/Machinists https://talonairgun.com/forums/topic/would-the-barrel-take-an-1-2-quot-unf-thread/#post-98337 Thu, 04 Feb 2010 23:04:22 -0400 Yes, it works very well. I have my barrels threaded 1/2-20.

]]> 1949aaa36b6e7c06ed2de73dfadfb6b9 shooter58 replied to the topic How old are you? in the forum General Chat https://talonairgun.com/forums/topic/how-old-are-you/page/4/#post-98320 Thu, 04 Feb 2010 20:15:05 -0400 65… some of my rifles are 40.

]]> a347f9522932cadc7d38e9406a41c3f3 shooter58 replied to the topic test in the forum General Chat https://talonairgun.com/forums/topic/test-d61/#post-85316 Tue, 06 Oct 2009 18:21:43 -0400 I’ll be there… been several times, good time, lots to see. A 4 1/2 hour drive for me, not tooo bad.

]]> f627c278e6e47f67dd1738c5a8c1e31f shooter58 replied to the topic .177 condor hiflo switch barrel to .22? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/177-condor-hiflo-switch-barrel-to-22/#post-80607 Mon, 24 Aug 2009 19:21:41 -0400 I have my Condor set up as a .177 and I have a 24″ .22 barrel for it as well. Using the 16 gr Eun Jin pellets, it has quite a punch. You can remain legal (which I always find a good idea) and still have a powerful air rifle. What can you hunt with an air rifle where you live ? The .177 may be quite adequate for your purpose. I like to shoot .177…Read more

]]> 0356fe4978ef2c57a1a1592e147b076a shooter58 replied to the topic test in the forum General Chat https://talonairgun.com/forums/topic/test-d27/page/3/#post-80229 Tue, 18 Aug 2009 20:42:13 -0400 I’m 65 next month, at which time I get a lifetime hunting / fishing license for $11…. I like that idea. Airguns are legal for small game in Tennessee.. like that too. I have been an industrial maintenance tech. for 40+ years ia a variety of industries. I got my first airgun before I started school, a Benjamin BB gun, it was all I could do to…Read more

]]> dfb442d66a867e7f8fe266ef20420294 shooter58 replied to the topic what are the legalities of silencers on air rifles? in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/what-are-the-legalities-of-silencers-on-air-rifles/#post-69235 Mon, 13 Apr 2009 13:25:35 -0400 I went the legal route, applied with BATF and paid fof the “tax stamp”. It took a couple of months to get it back, but then that’s it, no more to pay. It can be even transferred to an heir without additional fee, not that I’m worried about that. I figured $200 was insurance… if they confiscated even one of my rifles, I’d be out more than that.…Read more

]]> 39085e1d4831c2468ddd79fa3aba3426 shooter58 replied to the topic How did you find us? in the forum General Chat https://talonairgun.com/forums/topic/how-did-you-find-us/page/4/#post-68610 Tue, 07 Apr 2009 16:12:24 -0400 Finally bought an SS and joined the forum. Also lurked on the yellow, eventually joined. The TOG died and this place emerged from the ashes… I lurked some more, sold the SS, bought a Condor & joined TAG. I hit this place daily, or nearly so, lots of good info, stays civil enough. I’m doing what I can to spread the addiction, have just…Read more

]]> 527fd7ffdead24ca02f15dcbabeede51 shooter58 replied to the topic Don't tread on the TAG!! in the forum General Chat https://talonairgun.com/forums/topic/don-t-tread-on-the-tag/page/3/#post-67163 Wed, 25 Mar 2009 15:45:13 -0400 I like it also, bio-hazard applies to starlings. I may have to name my Condor “Bio-hazard”.

]]> d68b7877687d9a5f83ae87e44b9854b9 shooter58 replied to the topic Falcon menace or MTC Viper in the forum Optics/Nightvision https://talonairgun.com/forums/topic/falcon-menace-or-mtc-viper/#post-61273 Fri, 30 Jan 2009 16:04:56 -0400 I like the reticle… having more aim points below the horizon, so to speak, is a plus. The MTC christmas tree reticle makes windage estimation easier at longer range, or looks as if it would, as I’ve not used one. I think I favor the MTC and have one of those on my wish list.

]]> c29891a685a4b8d86d53008dc53ae9b1 shooter58 replied to the topic What do we do to pay the bills? in the forum General Chat https://talonairgun.com/forums/topic/what-do-we-do-to-pay-the-bills/page/6/#post-51195 Sun, 12 Oct 2008 11:33:26 -0400 Industrial maintenance guy, machine repair….. electronics, mechanics, hydraulics, pneumatics. A bit over 40 years into it now, things have come a long way since vacuum tubes. I hope I’m not too far from retirement if the economy doesn’t sink me.

]]> 5ed1875ab606756c9dff074257ca7761 shooter58 replied to the topic moderators=shrouds=silencers=trouble? in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/moderators-shrouds-silencers-trouble/page/2/#post-48262 Wed, 10 Sep 2008 21:20:19 -0400 If you want to have one without worries, you can go through the proper procedure, pay for a $200 “tax stamp” and after a couple of months it will come in the mail, and you’re good to go. As long as you’ve had no legal entanglements, it’s not a problem. I downloaded the form, filled it out, took it first to my county sheriff to do his part, mailed…Read more

]]> df6aa3b8e202333abb6c0ae61b85eaae shooter58 replied to the topic HOW OLD ARE WE??? in the forum General Chat https://talonairgun.com/forums/topic/how-old-are-we/page/3/#post-46793 Mon, 25 Aug 2008 16:19:23 -0400 I’ll be 64 next month, been playing with airguns since I was 5 or 6…. don’t remember that far back, ya know. I’ve got guns older than most of you… this is a hobby that doesn’t get old, as long as you don’t. I was out yesterday bustin’ yellow jackets with my Drozd in the back yard. I’m already figgerin’ how I can sneak one or two into the…Read more

]]> 611f42807fd7c768b5310ca199fe739b shooter58 replied to the topic gamo PT 80 question in the forum Other Guns https://talonairgun.com/forums/topic/gamo-pt-80-question/#post-45068 Wed, 06 Aug 2008 16:24:28 -0400 I shot a fair sized rat with mine using .177 predator pellets. He was running and I hit him on the second shot, he just stopped on the spot… dead, like all good rats. Like Rob said, no use to mess with it.

]]> 5e1fb5e16c8c2ec14414e02701ac4156 shooter58 replied to the topic Who received my Email? in the forum General Chat https://talonairgun.com/forums/topic/who-received-my-email/page/3/#post-44750 Sun, 03 Aug 2008 17:22:19 -0400 I got it…

]]> d0feb7575948729c56bc6240d63fd83d shooter58 replied to the topic Would it be stupid to buy this scope? in the forum Optics/Nightvision https://talonairgun.com/forums/topic/would-it-be-stupid-to-buy-this-scope/#post-41144 Sat, 21 Jun 2008 21:14:01 -0400 That would be a heck of a lot of money to me also… supposed to be a cadillac scope though. I have some pricey rifles but have a hard time thinking of letting go of that much for a scope when $150 to $300 will buy a lot of scope. Have you looked at the MTC scope at AoA ? I think that will be my next scope purchase because of the reticle. Check…Read more

]]> 12663756cd36fc7110c55f77ce6ba901 shooter58 replied to the topic just became a talon owner in the forum Mods/Machinists https://talonairgun.com/forums/topic/just-became-a-talon-owner/#post-39215 Sat, 17 May 2008 11:44:25 -0400 I had the TSS and now have a Condor. You’ll like the Talon, they’re lots of fun and really ideal for squirrel hunting. I’m not into blasting ’em out of season or for fun but for table fare. Blast some starlings for fun… shoot a few more for me. Have fun with your new toy & welcome to the club.

]]> d63ec0b2a8beb4b4567ec5a70cfc98dd shooter58 replied to the topic pyramyd air, condor part 2, .22 to .177 cal in the forum General Chat https://talonairgun.com/forums/topic/pyramyd-air-condor-part-2-22-to-177-cal/#post-39099 Wed, 14 May 2008 16:36:08 -0400 Both barrels for mine, no problems… either one rocks. I shoot the Eun Jin’s in .177 and it has plenty of pop. The .22 shoots just as well. I adjusted the tophat a bit, otherwise it’s stock.

]]> c483f5706dfa9052ee839b3e4e8bf860 shooter58 replied to the topic .177 tophat setting same as for .25 ? unmodified Condor... in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/177-tophat-setting-same-as-for-25-unmodified-condor/#post-37469 Wed, 09 Apr 2008 21:57:56 -0400 Mine was set at about .095″ but I didn’t really check it closely… I used a digital caliper instead of feeler gauges & may not have been “square”.

]]> 88cfb376fc07bf4d6c81b526047ce271 shooter58 replied to the topic .177 tophat setting same as for .25 ? unmodified Condor... in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/177-tophat-setting-same-as-for-25-unmodified-condor/#post-37443 Wed, 09 Apr 2008 16:47:47 -0400 The tophat is the little silver bit that is on the end of the valve stem, kinda looks like a hat in profile. There are two allen set screws to hold it in position …. loosen them and you can turn the tophat. It does control how much air the valve releases. Make small changes and be gentle with the lock screws. Clockwise looking at the valve will…Read more

]]> c02448af4ef3bce776742db5ada49299 shooter58 replied to the topic The official "TAG Team" T-Shirts anyone? in the forum General Chat https://talonairgun.com/forums/topic/the-official-quot-tag-team-quot-t-shirts-anyone/page/8/#post-36725 Fri, 28 Mar 2008 21:49:36 -0400 I don’t really like it either, and as you said, some folks won’t know what it is anyway. I prefer a simple design and a quality “tee” so it will last. Just my .02 ……

]]> 2f2326d84825046b10b9aebb0efd4677 shooter58 replied to the topic The official "TAG Team" T-Shirts anyone? in the forum General Chat https://talonairgun.com/forums/topic/the-official-quot-tag-team-quot-t-shirts-anyone/page/7/#post-36648 Thu, 27 Mar 2008 21:20:36 -0400 to the powder burners without being in your face. After all, we would like to recruit some of ’em instead of just pissing ’em off. And, it won’t get you arrested in Florida or anywhere else. I want to be able to actually wear one out in public.

]]> e7d1967c5ff7326245678293f9d01df3 shooter58 replied to the topic .177 tophat setting same as for .25 ? unmodified Condor... in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/177-tophat-setting-same-as-for-25-unmodified-condor/#post-36358 Sun, 23 Mar 2008 11:51:10 -0400 Well, got to play with it a bit yesterday, tophat set to .060″ and I put the .22 barrel in. I had taken both barrels to a gunsmith to have the muzzles threaded for my suppressor. Had to leave BATF registration & the suppressor with him and wait a week for him to get to it, but it’s a pretty job. I sighted in at 3 or 4 on PW, not too loud, then…Read more

]]>