https://talonairgunforum.com/members/stalker/activity/ Activity feed for stalker. Mon, 23 Feb 2026 16:11:56 -0400 https://buddypress.org/?v= en-US 30 hourly 2 2f76834aaec8992c167334a38790d864 https://talonairgun.com/forums/topic/what-are-the-legalities-of-silencers-on-air-rifles/#post-73604 Wed, 27 May 2009 17:01:19 -0400 Lonegun i been at work, or sitting at home drinkin beer shooting the neightbors cats.

]]> 0ceeba47a6f12022475ed8da9952ed88 https://talonairgun.com/forums/topic/having-a-problem-with-tank-dump/#post-70867 Mon, 27 Apr 2009 14:16:13 -0400 I was guessing after i checked the tophat setting on my buddies brand new condor and it was the same as mine, i had to second guess everything. i dont totally understand the tank dump or i wouldnt have been here asking what others thought could be wrong i was making stabs in the dark.

]]> 3927006d583efaeca6c655f2d1374268 https://talonairgun.com/forums/topic/having-a-problem-with-tank-dump/#post-70862 Mon, 27 Apr 2009 13:34:59 -0400 i have no clue how it happened but after i cleaned it all out no more tank dump.

]]> 91c83306e1945d50129eeb4264129c56 https://talonairgun.com/forums/topic/having-a-problem-with-tank-dump/#post-70488 Fri, 24 Apr 2009 16:22:56 -0400 i figured out the problem. it was lead dust oming back from my shroud and past the bushings somehow i completely disassembled it cleaned everything out put it back together put a little silicone lube on the bolt where it rides on the barrel and no more problems.

]]> dd8e249c7926ac1254cb795ff53f3978 https://talonairgun.com/forums/topic/how-close-for-a-coyote-kill/#post-70406 Thu, 23 Apr 2009 19:38:19 -0400 If you practice at long ranges with your 25 you should have no problem reaching 75yds. I shoot mine out to 100 all the time and have an 18″ barrel. thing is i am sighted in where i am shooting basically a one hole group at 35yds so at 100 the biggest group i generally shoot is about 1 inch. but i shoot about 2 tins of pellets over the weekend and…Read more

]]> cb5396112f5dfe4fb9caab5d7e223fd4 https://talonairgun.com/forums/topic/finally-got-it-right/#post-70299 Wed, 22 Apr 2009 16:46:17 -0400 slayer5 get you a piece of 1″ OD tubing some 5/16 USS flat washers and grind them down until they will free float inside the tube. Then drill 4 holes in each washer drill 4 holes in the tube where you want your first baffle. weld two of the washers together and line them up with the holes and spot weld them in place. Put a compression spring ontop…Read more

]]> 13325fb3db14ea40651d7e5ae41a0864 https://talonairgun.com/forums/topic/having-a-problem-with-tank-dump/#post-69970 Mon, 20 Apr 2009 14:32:44 -0400 its all factory i think ill try 90 and see what happens. thanks.

]]> 6a8259ca92c99acffeeda32cd3f1d6ea https://talonairgun.com/forums/topic/more-power-in-condor/#post-69713 Fri, 17 Apr 2009 13:40:23 -0400 I have noticed that i am getting quite a few more shots per fill with .25 than i was with .22 but i have alot more 22 pellets than i do 25 so for now i put my 22 barrel back in now i am trying to make an effective shroud for it.

]]> 224114a69189b9287fd5c1babbc0777f https://talonairgun.com/forums/topic/another-experiment/#post-69712 Fri, 17 Apr 2009 13:38:30 -0400 its a 5/16 fender washer they were 1-1/2 OD when i started on them. unless you know a secret to building them i wouldnt try this one i caused back pressure that caused a tank dump. this project has been scrapped. i am gonna make a shorter one that is bigger around today.

]]> 2da2b443307ef745697137d2d0afb589 https://talonairgun.com/forums/topic/made-an-insert-over-the-weekend/page/2/#post-69594 Thu, 16 Apr 2009 22:34:08 -0400 i thought about it but my rifle is by no means a show gun im gonna see how it works before i go any farther with it. if it works well i will probably do just that incase i get pulled over and the police see it if they see spotwelds and an endcap it is a definite giveaway. i dont even know if its illegal to have it on there or not. with all the ppl…Read more

]]> d9d4415f86763028c179dda989bd0846 https://talonairgun.com/forums/topic/made-an-insert-over-the-weekend/page/2/#post-69591 Thu, 16 Apr 2009 22:08:35 -0400 i wish i was good/patient enough to make something that engineered and that good looking. mine look like crap and after they are painted you can still see the spotwelds which hold in the baffles but what the hell least i try to do it myself.

]]> 313e1b772ccf0894efca51d9dab209f1 https://talonairgun.com/forums/topic/more-power-in-condor/#post-69328 Tue, 14 Apr 2009 13:55:23 -0400 those were my 22 numbers havent been able to get ahold of any .25 EJs as of yet soon as i get some ill get it on the chrony and let ya know

]]> 8402cc395afd53b0abbc2903d0ff399f https://talonairgun.com/forums/topic/more-power-in-condor/#post-69244 Mon, 13 Apr 2009 17:50:17 -0400 Id like to try a bloodnob valve but i was reading somewhere on here that it was causing someones bolt and hammer to jumb back forward when fired resulting in airloss. As far as 110 grain hammer i think it would beat my bolt to hell wouldnt it?

]]> 88c5a14725a78f4696eaa031080596db https://talonairgun.com/forums/topic/what-are-the-legalities-of-silencers-on-air-rifles/#post-68808 Thu, 09 Apr 2009 19:08:42 -0400 there is no way for it to mount on a firearm since the inside of the tube is way too large to even fit one of my rifle barrels and there is no way duct tape is oging to hold it to the rifle so hell dont guess there is much i need to worry about.

]]> 7ea20339ae7faed02b3382371ec437b5 https://talonairgun.com/forums/topic/what-are-the-legalities-of-silencers-on-air-rifles/#post-68804 Thu, 09 Apr 2009 18:50:28 -0400 but federal law supercedes state law (or its supposed to anyway) so unless the cop just wanted to be a prick which isnt uncommon its likely that nothing would be said. and if it did go to court i could just look at the pages of airguns sold leagally that already have moderators on them from the factory and likely walk on everything i would think.

]]> fa4b706bde65ae7eb52afaeb2bbfdd75 https://talonairgun.com/forums/topic/what-are-the-legalities-of-silencers-on-air-rifles/#post-68801 Thu, 09 Apr 2009 17:52:35 -0400 for the time being mine is just a hollow tube that slides into my frame and is held inplace with the set screw for the endcap. i dont see how it could possibly be modded to fit a firearm. also ATF shouldnt even get involved with a moderator on an airgun because according to everything i have found on the subject an airgun is not considered a…Read more

]]> e52cefedba1fc02b9a7f4c9620121179 https://talonairgun.com/forums/topic/what-are-the-legalities-of-silencers-on-air-rifles/#post-68795 Thu, 09 Apr 2009 17:04:52 -0400 well there is no way mine can go on a firearm so i guess im good

]]> 9b3efcec01e07a2f091caffe3d74df27 https://talonairgun.com/forums/topic/what-are-the-legalities-of-silencers-on-air-rifles/#post-68791 Thu, 09 Apr 2009 16:28:33 -0400 so are you saying it is or isnt illegal to have them on the airgun?

]]> 0993970925387107a2b265abf616c66c https://talonairgun.com/forums/topic/talon-tunes-supressor/#post-65745 Tue, 10 Mar 2009 13:30:10 -0400 well i cut the piece of the shroud that was damaged out ha the ends machined where they are perfectly straight and am getting it welded back together today then i am going to coat it with red locktite and drill a dimple into the aluminum piece that slides into my frame along with venting my bushings this should hold the shroud in place

]]> c5c1c8558bb29b97bedf61b43639a081 https://talonairgun.com/forums/topic/talon-tunes-supressor/#post-65594 Mon, 09 Mar 2009 17:02:54 -0400 No wasnt plugged and used a bore light to look at the baffles nothing ever rattled in the rifle and no baffles are creased just went to power adjustment 5 and it sailed 30yds across the yard.

]]> 0a4bbc0de4eb03e4f6f7f076af111dad https://talonairgun.com/forums/topic/talon-tunes-supressor/#post-65586 Mon, 09 Mar 2009 16:03:17 -0400 the grub was plenty tight you can plainly see where it dug into the base of the moderator as it was blown off.scraped the metal away. also i should tell you all that the newer model airforce rifles are larger on the inside of the frame than last years i dont know why i measured the inside of my condor, my friends talon, and another friends ss the…Read more

]]> 99dd69f8ba71c214d31be39779318765 https://talonairgun.com/forums/topic/condor-tank-dump-need-help/page/3/#post-63411 Thu, 19 Feb 2009 17:54:38 -0400 send it back to Air Force you have a lifetime warranty
and they will make it right sounds like you have an issue with the bolt mechanism you just have to call them and tell them that there is definitely something wrong and send your bottle if it is the wrong bottle they will send the correct one with it i had to send my brand new condor 22 to them…Read more

]]> 713916f827977a745614af502bd2e7a4 https://talonairgun.com/forums/topic/condor-falling-apart-1-week-after-i-got-it/#post-63032 Mon, 16 Feb 2009 15:03:56 -0400 Pat you sick som’bi*** whats wrong with you least i wait till thier dead to do what i am gonna do with them.

]]> e9cc9a4ce2c83f0d5f0f56414a555a59 https://talonairgun.com/forums/topic/condor-falling-apart-1-week-after-i-got-it/#post-62513 Thu, 12 Feb 2009 14:32:47 -0400 Already sent it back i opened up the trigger guard on it and couldnt figure out how all the pieces meshed together so it was my only option i didnt find stealth resource until i had sent it in hopefully i wont have anymore problems with it.

]]> 50dec4cee012a1d4a71d6f7f5326eb75 https://talonairgun.com/forums/topic/condor-falling-apart-1-week-after-i-got-it/#post-62158 Mon, 09 Feb 2009 19:01:42 -0400 cant really get a pic of it i tried to see if i could put it back where it belongs but when i took the trigger guard off all the parts in the mechanism are pewter so it may very well have had a bubble in the cast and broke the piece it hooks to. i have already boxed it up and sent it back to air force. but it wouldnt even hold the bolt open to…Read more

]]> 548931c8b7834746b3328bbe69c4dca7 https://talonairgun.com/forums/topic/9mm-kit/page/2/#post-61037 Tue, 27 Jan 2009 19:51:42 -0400 Im new to the site and was just wondering if you were making a kit like this for sale im shooting a b-50 right now but want something more powerful please let me know.

]]>