Before you release any more guns or stocks be sure to contact machine gun to make sure that you’re allowed too do that, ok?

cheers

The problem with the Edgun as I see it, is that the cost is what you’d pay in the UK for the top of the range Daystate (which would include customer service)….
Bearing in mind, prices in the UK are through…Read more

Glad to see another post from you.

May I ask a question? Are you this retarded in real life or does your retardism only come out when you sit behind a computer?

You don’t like the edgun, we get it.

Did you really have to personally insult people and write a 1000 word essay on why you are right and why everyone else is an arse…Read more

I’ve seen no evidence of them actually being better than a traditional barrel, seen lots state they are as good as but not better.

The friction rifling provides is not a lot, i don’t think you will see any significant improvement in power by this

Yep, I have three daughters, 15 years, 5 years and 2 months, one dog, three…Read more

he will say you lick ass

The customer is always right… thats a load of old shit and you know it

You look like an absolute fool, take a step back and read what you are writing.

May I add something that may put things a little in perspective when it comes to airguns and issues…?

Daystate: I have six DS guns. The DS AirRanger 80 was marketed as a 80 ft/lbs gun with great hunting potential and accuracy. I was stupid enough to get one at a very high price.…Read more

I have a question, I would like a ‘new’ serial number for my Matador R3 (.177 if it makes a difference…)

I really really want my gun to have the serial number “007”

Is this possible? Of course ill pay for the new breech or whatever is needed.

he had to spend $8k to realise how “unethical” Ed is…

Calls people who support him an ass licker… yet he gave ed enough money to buy a decent car…

The others work fine and that not the issue. And furthermore, I never, ever called anyone an ass licker so don’t put words…Read more

he had to spend $8k to realise how “unethical” Ed is…

Calls people who support him an ass licker… yet he gave ed enough money to buy a decent car…

Can someone explain why he had this huge problem with ed using regular words and thinking in a logical way?

thanks

are you for real?

please tell me what other manufacturers ‘warn’ people about new models or changes? How often have you bought something and then 2/3 weeks later the price drops or you find it has a new model…

it…Read more

are you for real?

please tell me what other manufacturers ‘warn’ people about new models or changes? How often have you bought something and then 2/3 weeks later the price drops or you find it has a new model…

it happens in every industry everyday. If…Read more

Love it… this is my next project for sure!

I confirmed how accurate mine was by shooting it directly into a £450 SKAN chrono, both were in 1fps of each other over 20 shots. Not bad for a £40 toy.

money well spent

Take your sub-par build for a budget gun and do one mate.

This thread is for proper bullpup owners.

great work there.

L

Not all situations need multi shot 😉

I image shooting off a bench is annoying with multishot, having to stop every 10 shots and fill up a mag again.

this is what I made once

as you can see, I am working on it hard

Looking at that Google map of the area pisses me off even more now. THANKs DUDES….lol!. that shit looks stupid as funk 😆 It looks like 2 roads parallel the range. regardless of how far the road are from that range, the location just looks dumb and not well thought out at all. to me,…Read more

Why are they nearly or over $500 over there 😯

.177 pellets cannot handle 925fps

watch that, puts it across much better than I can in words

Accessories such wheels, hamsters, trigger blades, butt hooks, pellet holders, magazines could all be made….

regulators, nope! the resolution is just not there to form a seal that a reg needs, and I doubt a plastic part could stand 120 bar of pressure that…Read more

We also have small targets (15mm from 8-25 and 25mm from 8-35) and we don’t wind the power up to make it easy :5:

on a 40mm standard FT target I don’t even have to range find from 10 yards to 47. I will always be in the kill. (won’t be the middle but you don’t get points for that)

If you can tell the difference between 35 yard and ‘long’ you really barely have to range find.

I don’t know why you would run a .177 so high, surely you get pellets spiraling at that velocity?

The rail is no problem for me.

I shoot a 3-12×44 hawke SR6, I shoot mainly HFT but also shoot FT with it, I keep within 5 shots of the AA grade shooters in my region on most comps, they have £2800 80x march scopes (along with leups/sightrons/nightforces/smits)…Read more

Regulators are set anywhere between 90 and 130 bar. This low pressure side is where the firing valve takes the air to fire your gun.

To me it sounds like this low pressure area isn’t low pressure and the regulator just isn’t regulating… The low pressure side is the same pressure as your air cyclinder so…Read more

Air arms s200
3 x s400’s
2 x EV2’s
Theoben Vanquish
Theoben MFR
2 Pro Targets
2 TX200’s
1 TX200SR
steyr lg100
steyr lg110
anschutz 2002
Daystate mk3
daystate mk4
daystate harrier
ripley AR5s
Plus others I have forgotten about 😳

I got it because I wanted something different, i sold 2 EV2’s to buy…Read more

I sent Tony a lot of spare parts more then a months ago, according to the tracking number…Read more

I sold two air arms EV2’s to get my matador. I love it to bits, its just as accurate and best of all no one else has one

In a way I’m glad, its failed at a unimportant time rather than half way through a shoot :5:

It’s a shame this is a semi-common problem, at least its broken now and hasn’t let me down in the middle of a competition or something. 🙂

I don’t fancy forking out for that on top of the price of the gun and a sidewinder!

I went out drinking in norway in 2011 …. £275 ill never see again

If you order from ED you will have no VAT or duty to pay due to him being in the EU….

I have plans to make them.

What will be the price for that Ed? 😀 😀

Many thanks 🙂