Talonairgun | strietwise | Activity https://talonairgunforum.com/members/strietwise/activity/ Activity feed for strietwise. Mon, 23 Feb 2026 16:11:56 -0400 https://buddypress.org/?v= en-US 30 hourly 2 a1b6c49fc8b5001e4bd6639058a4f124 strietwise replied to the topic hoot in the forum BullPup General Chat https://talonairgun.com/forums/topic/hoot-d35/page/2/#post-277237 Fri, 07 Jun 2019 12:00:54 -0400 I don’t think he fell. I bet he was pushed.

]]> d0787def525c73a909cbe7015b748082 strietwise replied to the topic Backyard Night Pesting for $12.75. in the forum Optics/Nightvision https://talonairgun.com/forums/topic/backyard-night-pesting-for-12-75/#post-275922 Mon, 13 Aug 2018 03:24:24 -0400 You have taken my idea up a few notches. Nice work. Suggestion. Try facing the light away from you but put a light reflector further out. Trailer stores sell all kinds of reflectors. That way you will get a clear signal that the light is on. The varmint will be better lit up and easier to see and shoot. Give it a try and let us know…Read more

]]> 5d67d4b2ff809d9360bc7ec1191c504e strietwise replied to the topic The FX guns are killing me LOL. in the forum FX Air Rifles https://talonairgun.com/forums/topic/the-fx-guns-are-killing-me-lol/#post-275806 Thu, 26 Jul 2018 22:24:33 -0400 My Matadors just keep shooting and shooting and shooting. Had them for over 5 years and never an issue. I went on a 3 day pesting hunt with some buddies. Everyone had issues with their guns except me. I got back from the hunt and went to the range to re-site it in. Assuming that with all the banging around I needed some adjustments. I…Read more

]]> 46d5ef44cefdbee655c7add2f9013d4c strietwise replied to the topic Tubular Magazine Add On in the forum General Chat https://talonairgun.com/forums/topic/tubular-magazine-add-on/#post-274965 Mon, 16 Apr 2018 11:21:39 -0400 No issues with distorted pellets. You can easily adjust the ears to get the correct fit and if adjusted properly they do not have any impact on the pellets.

]]> 2a9864b38bdbfb15b1a5c9a9df75c4fe strietwise replied to the topic Tubular Magazine Add On in the forum General Chat https://talonairgun.com/forums/topic/tubular-magazine-add-on/#post-274946 Wed, 11 Apr 2018 11:41:02 -0400 Exactly. I did that. I now load up and air up at the same time.

]]> e8e4f8dec2fc1b678b74416aa669e496 strietwise replied to the topic Tubular Magazine Add On in the forum General Chat https://talonairgun.com/forums/topic/tubular-magazine-add-on/#post-274933 Sun, 08 Apr 2018 11:49:06 -0400 I thought that seeing how many shots I have left would be important. I was going to put a few dremmel cut slits in the tube near the dispensing end. But it turns out I run out of air before I run out of ammo. So I simply load up every time I add air.

]]> fd1080dc991204c0cff5d08f602d1674 strietwise replied to the topic Tubular Magazine Add On in the forum General Chat https://talonairgun.com/forums/topic/tubular-magazine-add-on/#post-274929 Sat, 07 Apr 2018 16:15:48 -0400 Greg – Thanks for the feed back. I always wondered if anyone took advantage of the degasser suggestion. Glad it worked for you. Where did you get that extra long center screw with a knob on it? Nice improvement. Did you ever make a brass magazine?

]]> f7d446df3133f00d6f62fc3b65f0adc1 strietwise replied to the topic Just in: my new R5 long in the forum EdGun https://talonairgun.com/forums/topic/just-in-my-new-r5-long/page/2/#post-274497 Sun, 04 Mar 2018 01:20:23 -0400 Hey Ed. My R3s have been performing flawlessly for years. I was expecting that they would start giving me problems by now but no such luck. I just can’t justify buying a R5 until my R3 start acting up. How long do I need to wait?

]]> 3f16a452fd73c26c6ea6b7943188a59d strietwise replied to the topic Just in: my new R5 long in the forum EdGun https://talonairgun.com/forums/topic/just-in-my-new-r5-long/page/2/#post-274489 Sat, 03 Mar 2018 16:44:42 -0400 Actually if you screw a Coke bottle on to your barrel it would be considered a violation. If you go on you tube you can see lots of examples of oil filters screwed on a gun to silence them. To do that legally you must purchase and register an adapter that fits between the barrel and the filter.

Check it out. https://youtu.be/7t_pcWPdSDs

]]> 0f9fd1354141974a32a6991ab10ce094 strietwise replied to the topic Teds appeal to youtube in the forum BullPup General Chat https://talonairgun.com/forums/topic/teds-appeal-to-youtube/#post-274398 Sun, 25 Feb 2018 02:49:42 -0400 I watched it and it was very well done. He didn’t elaborate much on what was happening and why. I think I can guess at much of it but if anyone can add some detail that would be helpful. Thanks.

]]> 197cc5097aa7b2c1ecae269b86167754 strietwise replied to the topic Ernest Rowe in the forum BullPup General Chat https://talonairgun.com/forums/topic/ernest-rowe/#post-272905 Wed, 29 Nov 2017 12:52:21 -0400 quote :The next wisest FX move will be to ask Ernest to take down all the repair, learning, and tuning videos for other AGs and for Ernest not to accept work on any other brand other than FX.

I disagree. Ernest has prepared wonderful helpful videos. Why in the world would taking those down be a wise thing to do?

]]> cabe4e1670dcd49e8ee4b137e5455a0e strietwise replied to the topic OMG My New Lelya 20 cal …. in the forum EdGun https://talonairgun.com/forums/topic/omg-my-new-lelya-20-cal/page/2/#post-272276 Sun, 05 Nov 2017 15:28:08 -0400 So what is the story with Lelya availability? Are they still being manufactured? Are they available in the US? I have been thinking about getting one for quite some time but they never seem available or when they are there is only one in .20 cal..

]]> 4b691584b8a59b73aceb6b42ce63400c strietwise replied to the topic Matador Love in the forum EdGun https://talonairgun.com/forums/topic/matador-love/#post-269111 Sat, 13 May 2017 20:53:02 -0400 One reason no one is talking about Matadors could be because they are so reliable. If everything is working fine and tune ups are easy there is no reason post with questions. I took my RM3 .25 to PR to hunt iguanas a couple of months ago and beat the hell out of it for 3 days with no problems. When I got home I wanted to sight it in and…Read more

]]> a5b1542538e91f898bf88982804b0b8c strietwise replied to the topic Edgun USA Spring Brake of 2017 Super Sale! in the forum EdGun https://talonairgun.com/forums/topic/edgun-usa-spring-brake-of-2017-super-sale/#post-267783 Sat, 25 Mar 2017 01:44:13 -0400 Any .25 Lelyas available?

]]> 5c2790e9ddc87fa617d2a08763402563 strietwise replied to the topic Refreshed Lelya 2.0 in the forum EdGun https://talonairgun.com/forums/topic/refreshed-lelya-2-0/#post-267000 Mon, 06 Mar 2017 11:46:58 -0400 Any idea of the price and when they will be available in the US? I think I want one.

]]> 28936d8af3264941e4257377a6662d7b strietwise replied to the topic Male QD hose plug? in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/male-qd-hose-plug/#post-266906 Sat, 04 Mar 2017 12:05:49 -0400 I use a 1/2 inch cross section of an old skinny bicycle tire inner tube. Color matches the gun, it protects perfectly, no stressing of the port, never falls off and I can get 50 of them out of one tube. Give it a try.

]]> f0a82d735f0a547f81cd85f2a076ad4a strietwise replied to the topic new compressor is here in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-compressor-is-here/#post-262853 Fri, 09 Dec 2016 02:47:22 -0400 Thanks for the info you on this compressor. What about moisture? Does it have a system for ensuring dry air?

]]> 028570c2a960502ed18499369dd43dbe strietwise replied to the topic Foster male fitting dust cap in the forum General Chat https://talonairgun.com/forums/topic/foster-male-fitting-dust-cap/#post-261424 Tue, 15 Nov 2016 19:48:00 -0400 Go into Home Depot and get some of the rubber caps that are on the end of the fiberglass rods they sell for marking driveways in the snow. The are a perfect fit. They put out a bunch of those rods in parking lots before the winter snows start. You can get a pocket full in no time.

For my Matadors I use cross sections of a skinny bicycle…Read more

]]> dd7e70ff8a1922861affb2c63430e58c strietwise replied to the topic LDC comparison in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/ldc-comparison/#post-260127 Sat, 22 Oct 2016 01:20:45 -0400 I have been waiting for a post like this for years. I have been so frustrated by the lack of quantitative data on the effectiveness of LDCs. My own limited experience has been very frustrating and disappointing. I wish I could contribute but I do not know anything on this topic worth sharing. However, I a willing to learn. Thanks to all of…Read more

]]> f854d53b0b90c8107455736e7933604e strietwise replied to the topic I know what quite is now in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/i-know-what-quite-is-now/page/2/#post-258889 Fri, 23 Sep 2016 02:26:09 -0400 After drilling does putting insulation or any other material in the ldc help?

]]> 358b58ede336b252b7a126128cb7dabb strietwise replied to the topic I know what quite is now in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/i-know-what-quite-is-now/page/2/#post-258875 Thu, 22 Sep 2016 15:34:21 -0400 Hey Hoot,

Thanks for the post. I was thinking of doing enlarging the holes in both of my Matadors (.25 Std & .22 long – both shooting 925 fps). What kind of sound reduction can I expect? I have tried several moderators with no noticeable effect. So my expectations are low but if you could elaborate on what to expect that would be…Read more

]]> 55128af902bd176bb0751a4a285b9aab strietwise replied to the topic LDCs for Matador .25? in the forum EdGun https://talonairgun.com/forums/topic/ldcs-for-matador-25/page/2/#post-256835 Wed, 27 Jul 2016 11:09:45 -0400 quote donnyfl:I’ve come to the conclusion after spending $1000+ on aftermarket stuff for the .25 that promise to make it mouse fart that it doesn’t exist. I’ve accepted the fact that in order to make this gun quiet I have to reduce the fps which then reduces the hammerslap.

I’ve also shot the .22 R2.5 and have to agree they are so quiet compared…Read more

]]> 23facbd0f455f8a1d73ffd138be99b74 strietwise replied to the topic LDCs for Matador .25? in the forum EdGun https://talonairgun.com/forums/topic/ldcs-for-matador-25/#post-256799 Tue, 26 Jul 2016 19:44:05 -0400 I have tried a few LDCs on my R3 – .25 and found it had little affect on sound levels. My .22 is significantly quieter than my .25 with a LDC. Is there a LDC that really makes a noticeable difference?

]]> 81b25b37a73099f57629c69352c670ad strietwise replied to the topic Should I Be Concerned Because I Have A Short Cocking Handle? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/should-i-be-concerned-because-i-have-a-short-cocking-handle/#post-256798 Tue, 26 Jul 2016 19:37:23 -0400 Suggestion – Lay off the booze and check out some of the latest Victoria Secrets catalogues and your problem will gradually go away. At your age it may take a while but stay focused and you will have success.

]]> 2036cbbf7bf952e8a1a8b9e0ef2bdf4b strietwise replied to the topic Matador R4 in the forum EdGun https://talonairgun.com/forums/topic/matador-r4/#post-256462 Wed, 20 Jul 2016 11:13:28 -0400 quote Ed:For those who is waiting for it, bad news. We got problems with production and I doubt we will have it ready at least until the end of the year 🙁

Sorry for that.

With the best regards

Ed

Ed – ignore those that ALWAYS wine, criticize and complain. I look forward to the R4 being available. Until then I will shoot my R3 at every…Read more

]]> 7982e9f9b08efb7e54c7ae951f037615 strietwise replied to the topic Matador HST fix in the forum EdGun https://talonairgun.com/forums/topic/matador-hst-fix/#post-255820 Sun, 03 Jul 2016 01:26:55 -0400 Thanks once again for the helpful suggestion. I have been using a o-ring between the gun and the collar and that seems to be working fine. Using the set screw always made me nervous because I thought it could damage the threads. Is there any chance of that happening?

]]> f613e5bf17418cbfe383823a928e7624 strietwise replied to the topic EdGun Matador .25 Shorty has arrived!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-25-shorty-has-arrived/page/3/#post-255192 Sat, 18 Jun 2016 21:35:39 -0400 Keyser – I certainly have learned lots from your posts. Thank you for your efforts and please keep them coming.

]]> d4a1d080b1b13aac6911f99ff34f159a strietwise replied to the topic Impact - Matt Dubber in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-matt-dubber/#post-254289 Thu, 02 Jun 2016 18:50:43 -0400 I have to congratulate Matt on a outstanding review. It was well done and contained all of the information I wanted to know about the gun. The only down side is that I now have to buy one.

]]> 0485ee0bcc0e1f03455d8c3bab6730af strietwise replied to the topic 25 cal R3M with erratic fps in the forum EdGun https://talonairgun.com/forums/topic/25-cal-r3m-with-erratic-fps/#post-252386 Wed, 04 May 2016 20:51:26 -0400 I suggest trying the following;
1) fire a few dozen shots to see if it settles down.
2) If that does not work I would disassemble and check / replace the orings on the washer stack
3) When reassembling make sure he brass oring between the reg and receiver is properly seated.

Those are the obvious fixes. I am sure there will be other…Read more

]]> b4531e68b4099f8ad18983b4d5a39047 strietwise replied to the topic Edgun needs to get out of the Stone Age in the forum EdGun https://talonairgun.com/forums/topic/edgun-needs-to-get-out-of-the-stone-age/page/2/#post-252050 Thu, 28 Apr 2016 02:14:57 -0400 I am one of the happy ones. Every time I have contacted Tony to buy a gun, spair parts or with a question over the past few years I have gotten everything I asked for in a timely and efficient manner. I have no complaints at all.

]]> 8a37c318186b0f1875d01accbe6383cd strietwise replied to the topic BREAKING NEWS: Airguns to be banned soon. in the forum Off Topic https://talonairgun.com/forums/topic/breaking-news-airguns-to-be-banned-soon/#post-250225 Sun, 03 Apr 2016 02:27:18 -0400 Actually I know someone that works for EPA and they told me that air gunners are going to be getting a special tax credit because they are so effective at protecting the environment by removing invasive species. Starlings, English sparrows, collard doves and pigeons all qualify. There is a special form (IRS 1040 – JSB -18) that needs to be…Read more

]]> a193fc2abb38af1246d0b3f74441b0d1 strietwise replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/10/#post-249590 Wed, 23 Mar 2016 01:52:01 -0400 Hey Ed while I had no intention of buying another gun I have to admit the Leshiy has got me thinking. I do a lot of varmint busting in dairy barns and the Leshiy would be ideal for that close in shooting. A feature that would enormously valuable to have is to be able to change pellet speeds quickly. Is there any chance the Leshiy could have…Read more

]]> f4f0ff85f517be94341ae2a5721515c4 strietwise replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/3/#post-248774 Tue, 15 Mar 2016 11:29:12 -0400 I never considered owning a gun like the Leshiy. However after seeing Ed’s videos I am beginning to think it would be a nice compliment to what I already have. It’s small size and transportability opens new opportunities. Will have to give it some thought and follow the reviews.

]]> 89d7f0f7c73b9b1e51ed821f7adfa5a6 strietwise replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/2/#post-248742 Tue, 15 Mar 2016 01:43:16 -0400 quote acourvil:It’s 10% constructive criticism and 90% whining.

BTW, Oak’s posts make a lot more sense to me now that I figured out the ignore function for the new software.

Anything you can share on how to use the ignore function would be much appreciated. Thanks in advance for your help.

]]> 82deff7f4a21c115d96cf6da935232b0 strietwise replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/#post-248719 Mon, 14 Mar 2016 19:46:45 -0400 Hey guys, just a thought. If you don’t like the gun, don’t buy it. If you own the gun and have information on it to share then many of us would love to hear about it. At this point your whining is getting old.

]]> 090a65aa45b4bf88e3af9ad5d83fb65f strietwise replied to the topic New name for the class of the gun. in the forum EdGun https://talonairgun.com/forums/topic/new-name-for-the-class-of-the-gun/page/2/#post-248347 Thu, 10 Mar 2016 20:28:30 -0400 I think the name should attempt to capture what is unique about the gun (small, compact, lethal, accurate). Here are a few suggestions.

Edgun – Tactical – T1
Edgun – Scorpion – S1
Edgun – Hornet – H1
Edgun – Stinger – S1
Edgun – Lazer – L1

]]> 73d15c1e82e44adf36c266fe747a5034 strietwise replied to the topic Magazine pouch? in the forum BullPup General Chat https://talonairgun.com/forums/topic/magazine-pouch/#post-247271 Mon, 29 Feb 2016 02:21:31 -0400 Try these. A separate container for each magazine and they all screw together. They hold Matador .25 magazines perfectly.
I can keep magazines in my backpack or pocket lint and dirt free. Empty magazines go on the bottom. New ones come off the top. CVS sells them for $5.

Happy hunting.…Read more

]]> e034ee9a6890de1c9b13fba349f13188 strietwise replied to the topic Offset Moderators Ed promised us? in the forum EdGun https://talonairgun.com/forums/topic/offset-moderators-ed-promised-us/page/16/#post-246411 Tue, 16 Feb 2016 20:01:25 -0400 I have seen very little discussion on how well these moderators work. Is the .25 with the improved moderator quieter than the .22 without the moderator? Does it “REALLY” make a difference or is it “noticeable only if you pay attention and turn your head to the left”. I would be great to hear quantitative assessments of how well it works…Read more

]]> db9bd51c63e1ffd507ce7728365eb744 strietwise replied to the topic Shimming a scope mount for optimal zero (not optical zero) in the forum BullPup General Chat https://talonairgun.com/forums/topic/shimming-a-scope-mount-for-optimal-zero-not-optical-zero/#post-244668 Sat, 30 Jan 2016 22:33:32 -0400 I have done this several times on my Matadors. It works.

If you want to change the slope of your scope rail a few degrees.
1) remove the scope rings and rail.
2) wrap the muzzle end of the rail in heavy cloth or cardboard.
3) put he wrapped end of the rail in a vise and apply some hand pressure to gently bend the rail muzzle end up
4)…Read more

]]> 036d5fac87cf70d2ecc52f607107ce25 strietwise replied to the topic R3M needs a bit of work in the forum EdGun https://talonairgun.com/forums/topic/r3m-needs-a-bit-of-work/#post-243969 Thu, 21 Jan 2016 20:42:20 -0400 You can make your own degas tool for about $10. Here is the link.

http://talonairgun.com/forum/viewtopic.php?f=34&t=27095

]]> 684f938320f44dc0c1c99232efcb18c0 strietwise replied to the topic R3M needs a bit of work in the forum EdGun https://talonairgun.com/forums/topic/r3m-needs-a-bit-of-work/#post-243950 Thu, 21 Jan 2016 17:46:59 -0400 Most regs need a good cleaning when they come from the factory and after they get that cleaning they work much better. I would give it a good cleaning and at the same time mark the current reg settings and replace any O-rings that look like they need it. Then run a fresh string and see if there are any issues.

]]> 7026707537b5891b3567903de266afa1 strietwise replied to the topic Offset Moderators Ed promised us? in the forum EdGun https://talonairgun.com/forums/topic/offset-moderators-ed-promised-us/page/11/#post-241885 Wed, 23 Dec 2015 04:34:53 -0400 Kiba.
Thanks for the very informative post. I am going to give it a try on my .25 standard and perhaps even my .22 long. Is there any additional info you can share on how you did it. Dill bit size, number of holes other suggestions.

Thanks a bunch.

]]> 7faa13a521a4c99788e01fab497307c3 strietwise replied to the topic Offset Moderators Ed promised us? in the forum EdGun https://talonairgun.com/forums/topic/offset-moderators-ed-promised-us/page/9/#post-241490 Fri, 18 Dec 2015 13:19:11 -0400 I have been thinking about getting an ofset moderator for my .25. Could someone provide some info on how well they work. Is there a significant improvement?

]]> d4f700a4f29acf3639a0acc971970b22 strietwise replied to the topic Diesel oil on Matador .25 bevel washers in the forum EdGun https://talonairgun.com/forums/topic/diesel-oil-on-matador-25-bevel-washers/#post-241431 Thu, 17 Dec 2015 02:19:06 -0400 Had the same experience with one of my R3s. It shot better after the cleaning. The barrel also needed a good cleaning.

]]> 04e23a32031cbfab64ad5d8bb2de52da strietwise replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-240932 Wed, 09 Dec 2015 21:26:26 -0400 quote tejani:quote Strietwise:I had the same problem. I found the issue to be the tightness of the screw that connects the stock to the gun and the bedding of the metal flange and the stock. If the screw that pulls the stock and gun together and the bedding are not exact it can force the air tube and barrel together. For me the solution was…Read more

]]> 8a2608066a3facdd60b28242ab59cb38 strietwise replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-240927 Wed, 09 Dec 2015 20:21:46 -0400 I had the same problem. I found the issue to be the tightness of the screw that connects the stock to the gun and the bedding of the metal flange and the stock. If the screw that pulls the stock and gun together and the bedding are not exact it can force the air tube and barrel together. For me the solution was to glue a stainless steel…Read more

]]> daf20dc6642689a602928cea878fe58d strietwise replied to the topic Offset Moderators Ed promised us? in the forum EdGun https://talonairgun.com/forums/topic/offset-moderators-ed-promised-us/page/6/#post-238781 Fri, 06 Nov 2015 15:51:20 -0400 If would great to hear from folks on how well these moderators work. I have a .25 standard and have been seriously considering picking up one of these moderators. I am holding off from jumping in until I hear back from someone with a more detailed assessment. My experience in the past with moderators has taut me to lower my expectations and…Read more

]]> 40dc2e83df7e651e972df7ae3eaa1eb1 strietwise replied to the topic Offset Moderators Ed promised us? in the forum EdGun https://talonairgun.com/forums/topic/offset-moderators-ed-promised-us/page/5/#post-237750 Wed, 21 Oct 2015 21:29:52 -0400 Sounds like something I did years ago with an old girlfriend after we had to much tequila. I sure miss that girl. Just saying…..

]]> 32d852cf4f5cbcd30c24ba2185a9fe1d strietwise replied to the topic Fall Gathering Of Starlings in the forum BullPup General Chat https://talonairgun.com/forums/topic/fall-gathering-of-starlings/#post-236892 Thu, 08 Oct 2015 15:44:26 -0400 How about a friendly competition on who can take the most starlings in a one week period? I suggest that we start Sunday October 11th and end Saturday October 17th. Who ever takes the most starlings with an airgun wins. I pledge a send a small gift to the winner. Anyone want to join the competition or pledge a gift? Now is the time to jump in.

]]> 6900408a559b8e417084ca20cb49a5a4 strietwise replied to the topic Is the EDgun possible to hand-pump from empty in the forum EdGun https://talonairgun.com/forums/topic/is-the-edgun-possible-to-hand-pump-from-empty/#post-235000 Tue, 01 Sep 2015 15:16:55 -0400 Be careful of moisture. This time of year it is likely to be an issue. It will be hard for a moisture filter to keep up when filling from empty. I have posted in the past on how to use a copper coil and a freezer to strip out moisture on a high volume fill. You might want to consider that as an option.

]]>