Talonairgun | tagdagger | Activity https://talonairgunforum.com/members/tagdagger/activity/ Activity feed for tagdagger. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 77789050299b5b21dcf2e2121b30de67 tagdagger replied to the topic Any Suggestions For The TAG in the forum General Chat https://talonairgun.com/forums/topic/any-suggestions-for-the-tag/#post-534610 Sat, 15 Aug 2020 03:53:20 -0400 Go back to the original format with the blue from years ago. Fewer categories, easier to navigate and there was something compelling about it.

]]> ac2beedf8571637cde3a1206049f877e tagdagger replied to the topic seeking help - backyard friendly airgun in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/seeking-help-backyard-friendly-airgun/#post-277127 Mon, 15 Apr 2019 03:44:23 -0400 I have a wood stock Bullboss in .25 that cost $600ish. The gun is very powerful,accurate and the quietest gun you will ever shoot with only its stock suppressor. the air tanks ping and target impact make more noise than the shot.
It is a little on the heavy side, but so is any other gun once you have scoped it.

]]> fadfe253bd989f64d66eba98f117bb7f tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/12/#post-276692 Tue, 11 Dec 2018 03:16:15 -0400 Here is a video of one of the reg prototypes. The shot results are at the beginning.

It did very well but no matter how large the pre-chamber I always lost power vs a straight tank valve arrangement.

]]> 06551dcc6517f14c9854a4e373207c30 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/12/#post-276673 Sat, 08 Dec 2018 21:33:16 -0400 I still have parts for 3 kits left. after that I wont be offering them anymore, However Im working on a whole gun design that uses the ML concept and a few more unique features. I have 2 prototypes built on heavily modified AF frames I’ll offer for sale at some point.

The current configuration doesn’t have the rail stock or ammo dispenser. It…Read more

]]> 8da9f3c38a006b7bb9c6e0a2caa183a8 tagdagger replied to the topic Micro light in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/micro-light/#post-275054 Wed, 25 Apr 2018 01:40:42 -0400 I found a couple. Will pm you with a pic soon.

]]> 1d16039f584e61f6f178880747b58d12 tagdagger replied to the topic Micro light in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/micro-light/#post-275042 Sun, 22 Apr 2018 23:34:22 -0400 probably not, but I will look.

]]> 269c3420d119545be6669dbb3d980311 tagdagger replied to the topic Micro light in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/micro-light/#post-275037 Sat, 21 Apr 2018 20:10:10 -0400 The disrupter is discontinued it was specific to the microlite kits. The latest sound suppression for the kits is built in to the barrel mount.

]]> 95491d5b374251e7313b0b3c3cc87f3c tagdagger replied to the topic Forward tank mount for Microlite Kits..yes,no,maybe? in the forum General Chat https://talonairgun.com/forums/topic/forward-tank-mount-for-microlite-kits-yes-no-maybe/#post-274247 Sat, 10 Feb 2018 02:52:16 -0400 quote Jethro:tagdagger, go for the redesign. With your ideas and experience it’ll be well worth it and some thing special.

Thanks Jethro, I will give it my best :geekn:

]]> 2988ef6ba3be5e747bf3c6a463140a12 tagdagger replied to the topic Forward tank mount for Microlite Kits..yes,no,maybe? in the forum General Chat https://talonairgun.com/forums/topic/forward-tank-mount-for-microlite-kits-yes-no-maybe/#post-274228 Thu, 08 Feb 2018 12:02:27 -0400 quote WalkonKing:That looks pretty good.

Actually you are not that far from making the entire gun.

Thanks Wok. Always building,testing and having fun! We will see where it goes :4:

]]> c48b0d59cb90d02221bb938f9fe9d76d tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/11/#post-274221 Wed, 07 Feb 2018 12:38:12 -0400 Im a ways off from offering this. Price would be as much or more than the the original gun but it would include a reg. which would increase performance so price may not be an issue if the performance is there.

Its just a prototype at this point. lots of weight can be shaved down but unfortunately additional parts will always equal more weight.

]]> 80cca8f9965d261914987c6937319003 tagdagger replied to the topic Forward tank mount for Microlite Kits..yes,no,maybe? in the forum General Chat https://talonairgun.com/forums/topic/forward-tank-mount-for-microlite-kits-yes-no-maybe/#post-274220 Wed, 07 Feb 2018 12:28:04 -0400 quote :Now, if the price of the kit approach the cost of the original gun, maybe it is time to change the frame design completely, keeping just the internals?

I’m beginning to think that way. I have an awesome design on a full frame whole gun drawn up. Have also been studying trigger design for a while now. There is a point you get to in modding…Read more

]]> 1b9db215d1d3460a37480cc3777c50fe tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/11/#post-274196 Mon, 05 Feb 2018 00:42:11 -0400 Here are some pics of a possible forward tank mount add on for the kits.
If I do offer this or a variation there of, it will be compatible with the original aluminum rear action that some of you already have.






]]> 193ebd765de606b8f3cee5dd34758851 tagdagger replied to the topic hellcat(talon P) filling problem in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/hellcat-talon-p-filling-problem/#post-273006 Sun, 03 Dec 2017 02:53:40 -0400 Even withstanding the clearance the top hat appears to have. Boring out the inside of the fill adapter a bit will likely fix the issue.

]]> 46fcca213ce39df8e92efc489cbcc2f2 tagdagger replied to the topic chinese airforce bullpup kit in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/chinese-airforce-bullpup-kit/#post-272046 Thu, 26 Oct 2017 00:25:16 -0400 The U adapters are a good solution to get the maximum barrel length/minimum overall length on a BP build, but most of the ones I’ve seen look kind of ……… ugly?

Here is a link to the best looking U adapter build I have seen so far.
https://youtu.be/OfaMnD4rDCg?t=52

]]> cd017cb86ea74986e23f954763999404 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/11/#post-270596 Mon, 07 Aug 2017 01:52:48 -0400 I currently only have kits with the aluminum action. They go on very tight and installation is pretty much a permanent mod. If interested you can PM me.

]]> 1a3018d7b168385a22ac0fa76185167d tagdagger replied to the topic Help with Talondor Velocity Inconsistencies. ...PLEASE in the forum General Chat https://talonairgun.com/forums/topic/help-with-talondor-velocity-inconsistencies-please/page/2/#post-270276 Tue, 18 Jul 2017 12:53:56 -0400 Polishing the stem is definitely a good thing to do.

Ok, being that you’ve tried almost everything else if it were my gun I would do this: Order a direct flow valve seal from Air Force and install it. The seal is a little longer so you won’t be able to screw in the retaining nut all the way but I’ve set up a lot of guns up this way and they work…Read more

]]> 38e7ca71121cb675021e102ed89367ca tagdagger replied to the topic Help with Talondor Velocity Inconsistencies. ...PLEASE in the forum General Chat https://talonairgun.com/forums/topic/help-with-talondor-velocity-inconsistencies-please/page/2/#post-270272 Tue, 18 Jul 2017 02:40:04 -0400 Here are some of the other things that could cause radical velocity fluctuations.

1 to much Top hat gap or a loose top hat.

2 to much preload on the hammer spring ( causes excessive hammer bounce and subsequent burst of air)

3 Hammer is not heavy enough to open valve consistently.

4 damaged or un- lubricated orings in breech slide.

5…Read more

]]> 927991bd31ab464d1588867ebfb9addf tagdagger replied to the topic Help with Talondor Velocity Inconsistencies. ...PLEASE in the forum General Chat https://talonairgun.com/forums/topic/help-with-talondor-velocity-inconsistencies-please/#post-270233 Sun, 16 Jul 2017 01:12:51 -0400 It would be worth a look to see if the valve spring retainer has back out some. That would cause what you are describing, even if it hasn’t trying a little heavier valve return spring could solve your issue.
For a non-regulated gun Valve dwell time should be short and quick especially for a valve stem that moves a lot of air like the TT one.

]]> 61b21111cb1d123ef4d8ac65ddc807e4 tagdagger replied to the topic Ammo Holder/Dispenser for Texan in the forum Texan https://talonairgun.com/forums/topic/ammo-holder-dispenser-for-texan/#post-268640 Thu, 20 Apr 2017 18:47:08 -0400 I sold my last two earlier this year.
I have them made at the same time as the .22 25 dispensers and I still have several of those.

Anyone wanting one PM me and I’ll start a list.
If there is at least a half-dozen people before I run out of the 25s I’ll do a run a little early.

]]> 1d8045d81fc445deb5e56f6d30919b0b tagdagger replied to the topic Leshiy twin air in the forum EdGun https://talonairgun.com/forums/topic/leshiy-twin-air/#post-264776 Sun, 15 Jan 2017 02:33:25 -0400 Baz’s skills are more than a little north of “home made”

I believe he will be Ok :winkn:

]]> 850f265c7dbf1ed8e232acee11d4cdbc tagdagger replied to the topic Any Guidance on Casting .25 Bullets? (Plus .458?) in the forum General Chat https://talonairgun.com/forums/topic/any-guidance-on-casting-25-bullets-plus-458/#post-261097 Fri, 11 Nov 2016 00:57:06 -0400 Beware trying to cast the .257 bullets for .25 You would need to size them down to .250-.251 which make the cannelure all but disappear increasing drag and lessening accuracy for an airgun barrel.
The Gary Barns type .25 slugs are best for airguns.

]]> 307e303b743c622a08a649cd75c8888b tagdagger replied to the topic My Microlite in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/my-microlite/#post-260708 Sat, 05 Nov 2016 00:59:42 -0400 Those are good numbers. My favorite tune for the 12” barrel is just under 800. Good accuracy and sound suppression at that velocity.

Im currently shooting 60gr slugs at over 70fpe from a shrouded 18” barrel. I can also get a good numbers tune at 90fpe, but the accuracy isn’t there.
At 70fpe Im shooting 1 ragged hole groups at 60yards and 1.5”…Read more

]]> 2d93c0aac90a4c63e293a00bc7e2c8d7 tagdagger replied to the topic My Microlite build in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/my-microlite-build/#post-258848 Wed, 21 Sep 2016 01:21:42 -0400 Looking good there! You probably already know this but, if you ever wanted to remove the rail stock the aluminum rear action is totally self supporting so you could change to a quick detach set up or go back and forth.
These guns are quite mod-able they are :geekn:

]]> d38de5439fd0214964cb7dad53077c6f tagdagger replied to the topic TalonP average FPS question. in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/talonp-average-fps-question/#post-258461 Sun, 11 Sep 2016 19:02:12 -0400 The polymags are a good choice, very accurate. I don’t have any to test for you but a good guess at a .92-.95 tophat gap and low PW would be around 780fps.

]]> c999603a2d81acdb63b07ec1e2bef210 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/11/#post-258459 Sun, 11 Sep 2016 18:55:32 -0400 Coors, at this point its just drawings and a marked up pc of extrusion. maybe next year.

]]> f96ce01dc1bb8c4bc552700c705d9358 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/10/#post-258054 Mon, 29 Aug 2016 14:25:01 -0400 quote Caboose212:Oh man… I can’t wait for everything to be done!!

Yep, me too :biggrinn: An AF compatible full frame with trigger group is a large endeavor. Only an air source and valve away from a whole gun, so like I mentioned 50/50?
For now the kits are the best way for shorter,lighter,and quieter.

]]> ef5cb2b96cd3e385a24a88a6cc744801 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/10/#post-258034 Mon, 29 Aug 2016 02:15:33 -0400 quote Caboose212:quote tagdagger:quote Tec-0-Tea:Do you get more shots without the added hammer weight installed?

Anything that reduces air consumption will add to your shot count, but with the direct-flo valve you need the extra hammer wt to open the valve especially at the higher pressures. The best way to get more shots is with a longer more…Read more

]]> ade441544062a437e422c6064980d47a tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/10/#post-258033 Mon, 29 Aug 2016 02:12:46 -0400 quote Caboose212:Here’s a crazy idea- if someone has a AF frame blank (the raw, unmachined extrusion), could this design be integrated into the frame? :

I have a fullframe design alternative for the bullpup and for the standard frame, just recently settled on a trigger for it, but its on hold for now. Airforce’s primary patent is still in effect…Read more

]]> 5d782151f3bf91775743353624d918c9 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/10/#post-258031 Mon, 29 Aug 2016 01:37:56 -0400 quote Tec-0-Tea:Do you get more shots without the added hammer weight installed?

Anything that reduces air consumption will add to your shot count, but with the direct-flo valve you need the extra hammer wt to open the valve especially at the higher pressures. The best way to get more shots is with a longer more air efficient barrel.
A 16”…Read more

]]> dbdb9c8962becc697b99e1bc7f007007 tagdagger replied to the topic MY TT MADDOG MICROLITE BULLPUP BUILD in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/my-tt-maddog-microlite-bullpup-build/#post-257812 Wed, 24 Aug 2016 01:20:36 -0400 That’s a good start, but the gun is capable of a lot better accuracy. When you get your 18” barrel installed Next time your at the range try
turning everything back a bit. PW 2-4, reg pressure 2500-2700; no insert in the TTtop hat and Oring behind and shoot unshrouded till your accuracy improves then mount your shroud check for any poi…Read more

]]> fea6aecd80755e82bd0da409ecb93886 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/10/#post-257558 Thu, 18 Aug 2016 01:15:53 -0400 quote Caboose212:Are these kits still available?

There’s an aluminum version now??

Jeeze, how long have I been gone?!

I’ve been doing some additional refinements on the aluminum rear action. Will post some pics and maybe a video soon.

]]> 6265a6f277b010c9329fb8fd493d08f1 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/9/#post-254779 Sun, 12 Jun 2016 04:51:29 -0400 quote Jethro:quote tagdagger:Am I right in thinking that the kits design will accept a TT suppressor?

With regard to removing the power wheel, will it be as simple as replacing the PW with a suitably sized spacer?

You can add the TT suppressor no problem and a non-telescoping pc of blank Delrin to replace the PW should keep all the ML kit specs…Read more

]]> 977ab4602ca8a412da10255c61b6ce9c tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/8/#post-254746 Sat, 11 Jun 2016 04:09:13 -0400 quote Jethro:So please tell me, am I on the right track here or is there anything I’ve misunderstood?
And how would one go about converting the space vacated by the power wheel (2″?) to aid noise suppression?

While possible unfortunately it might take additional engineering to take advantage of the PW void. The barrel mount would have to move…Read more

]]> d9de6ea5afcbe559d29d75c74a304679 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/8/#post-254744 Sat, 11 Jun 2016 03:42:56 -0400 quote coors:so is that shroud 2 1/4″ diameter?

The OD on the shroud in the video is 1.75.

It is a cool, but very radical mod that I did to my oldest original prototype frame that was used to engineer the kits so it was a good volunteer for the project.

quote :tagdagger wrote:
If one was willing to get rid of the PW that would add 2 more inches…Read more

]]> 7082c5bad653e2d82266d1e58d5c06bd tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/8/#post-254637 Thu, 09 Jun 2016 03:06:35 -0400 Hoot’s right about that black Acetal. I don’t think it would distort or wear in a 100 years of use. The choice was and is difficult between using Acetal or aluminum as they both have advantages and disadvantages. Initially I went with the Acetal because it is extremely lite wt, rigid and would not mar the anodize on the gun when attaching to the…Read more

]]> 9d52180ad5d216859c914590cca74e56 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/8/#post-254528 Tue, 07 Jun 2016 04:12:34 -0400 Hummm….that is a mystery. You and Hoot have me wanting to set up a 16” barrel.

Check out this folding stock prototype. labor intensive build, but fun 🙂 https://www.youtube.com/watch?v=DreSW6kJZ6Q

]]> ba547ea99421c498c77b1fd7b5b13430 tagdagger replied to the topic Can You Please Help Me Out....? in the forum General Chat https://talonairgun.com/forums/topic/can-you-please-help-me-out/page/2/#post-254242 Thu, 02 Jun 2016 02:38:17 -0400 Done…Digging that black edgun in your commercial 🙂

]]> 75d78d7e79b9ca9f5c4d5413e11352dd tagdagger replied to the topic Full length picatinny .257 in the forum Mods/Machinists https://talonairgun.com/forums/topic/full-length-picatinny-257/#post-253782 Wed, 25 May 2016 03:00:10 -0400 quote wll2506:I love that stock … very nice, was it difficult to mod the stock ?

wll2506

Not to bad. Trigger guard had to drop back a bit for clearance on the butt plate end and the back end was hand fit and ground for the proper angles.

]]> 5bddb83cb7f1468e040b0cc43b008cbe tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/8/#post-253666 Sun, 22 May 2016 19:24:53 -0400 quote coors:Dave, I can’t believe that I didn’t see this until today. Man, I’d really like to get one of those aluminum QD actions, bare. I’ll send you a PM. By the way, the original kit that I bought from you is absolutely fantastic and accuracy is 100% reliable, now that every screw is loctited. Set up for the 1st 3-shots averaging right at…Read more

]]> faa32850b87b683f4bb96de192377c64 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/7/#post-251078 Sat, 16 Apr 2016 10:37:33 -0400 Made up a couple of aluminum rear action housings for a quick detach option on the kits. Will be black anodize, although the silver does look kind of cool.

]]> 428979a57496355c9f263faadcbd2fdc tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/7/#post-248739 Tue, 15 Mar 2016 00:18:15 -0400 You can get the valve seal and spring directly from AF 1-877 247 4867 Be sure and specify you need the direct flo seal for the TalonP.

]]> d788ac3eb12a22fffbad6a77c373083f tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/7/#post-248604 Sun, 13 Mar 2016 15:18:11 -0400 quote Hoot::hoot:

Curious….Where is the “stripped air” routed to?

Is it re-circulated within the shroud, or vented somewhere along the shroud frame?

That’s correct. The air is not immediately vented into the atmosphere like a front mounted airstripper, but even contained in the frame it is still a benefit. It redirects most of the air flow…Read more

]]> 204849789106e3db7ff6d428ef721f90 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/7/#post-248581 Sun, 13 Mar 2016 05:00:34 -0400 I have been testing a new air stripping mod for the kits. Testing has revealed a definite benefit managing the extra air especially when shooting at higher fps. Every extra feature adds to the cost of making the kits so I may offer them as an accessory or when I find the optimum distance from the barrel move the choke point and eliminate the…Read more

]]> 9b58d54894aec4649283cb4d4a4954a4 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/7/#post-247534 Thu, 03 Mar 2016 03:13:35 -0400 Here are some pics of an awesome build a customer just sent me. The stock is just Gorgeous. Doug of Maddog stocks is the Michael Angelo of wood. amazing work!


]]> 32eac0520fb906817c69dca9afe4f3bf tagdagger replied to the topic W.A.R. valve insallation, so easy a bind man can do t? in the forum Benjamin Marauder https://talonairgun.com/forums/topic/w-a-r-valve-insallation-so-easy-a-bind-man-can-do-t/#post-247239 Sun, 28 Feb 2016 15:55:10 -0400 RC, It’s So very good to see your name on a post again. An Indomitable spirit like yours will most always find a way! Always in my prayers, God Bless you and your family

]]> 702466300623033884e87af981a732b2 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/6/#post-246349 Tue, 16 Feb 2016 02:55:08 -0400 Finally found some time to do updated kit pics with the new sound suppression barrel mount.
The 1st pic is of the kit for the mad dog stocks. The 2nd one is the standard kit.



]]> b3934e213058ea068c52fed3b8a950b2 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/6/#post-245861 Thu, 11 Feb 2016 19:51:20 -0400 That’s going to be a nice one. When building the integral suppressor for the 12” barrel I came to the same conclusion about volume, that’s why I went with choke points instead of volume reducing baffles.

Some baffling is needed, but of all things to be considered for sound suppression volume is most important. You will notice that the most…Read more

]]> a0622a0308b68231f02526e0fca4541d tagdagger replied to the topic Arrow barrel? in the forum General Chat https://talonairgun.com/forums/topic/arrow-barrel/#post-242973 Thu, 07 Jan 2016 02:43:02 -0400 Thanks Rob, I’m going to hang back and see how it goes with this Airbow first.

Noticed on their web site they are encouraging people to contact their Fish and Game reps to ask to be able to hunt with it during archery season, but I believe they would do better trying to get an allowance for deer in with muzzle loading seasons. I think the…Read more

]]> f169a6ea2e05f48aaefa96af7710c493 tagdagger replied to the topic Microlite Bullpup kit for TalonP in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/microlite-bullpup-kit-for-talonp/page/5/#post-242970 Thu, 07 Jan 2016 02:19:01 -0400 Great job on the valve stem. Very nice 😀

]]> 18d49ec17b14579162254b1817544006 tagdagger replied to the topic Arrow barrel? in the forum General Chat https://talonairgun.com/forums/topic/arrow-barrel/#post-242918 Wed, 06 Jan 2016 02:29:32 -0400 Good to see the air propelled archery becoming more popular. I really like the legal to hunt map that Crosman posted. http://www.crosman.com/airbow Not sure if Big bore airguns allowances translates to Air Archery equipment but with the right lobbying by a large company like Crosman it would be a short jump to get it there.
If this keeps gaining…Read more

]]>