Talonairgun | techmod | Activity https://talonairgunforum.com/members/techmod/activity/ Activity feed for techmod. Mon, 23 Feb 2026 16:11:56 -0400 https://buddypress.org/?v= en-US 30 hourly 2 aafc495a3f99f1e92c9dfe1aad2b3b4e techmod replied to the topic AirForce Pump Repair Help in the forum General Chat https://talonairgun.com/forums/topic/airforce-pump-repair-help/#post-160490 Sun, 30 Sep 2012 22:12:31 -0400 I had that problem too. The hill pumps dont use an o-ring in this location.
I also notice that the nylon washer should be replaced evry so-often.
My pump intermittantly cycles or pressurizes itself and pushes the handle up. I’m pretty sure thats what happens when the nylon washer is bleeding too much air?? Hope that helps.

]]> 111dad8b16dcd96d8852e18d1029ed11 techmod replied to the topic Tallon ss 177 condor top hat assm? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/tallon-ss-177-condor-top-hat-assm/#post-130157 Sun, 13 Mar 2011 23:56:13 -0400 Wow,
Contrary to popular belief!
Did some testing with a Condor Hiflo on a TSS .177
Funny, been having problems with the standard Talon SS valve.
The Condor Hiflow seems to have a very stiff valve seal (preload) spring.
I can crank the PW all the way and get good numbers on the chrony.
Light standard pellets can go over 1100 fps 10.5 grainers can…Read more

]]> d7c137414a6376ddb1a8df7ba0b4dfe2 techmod replied to the topic Trigger honing and stoning----- in the forum Talon/Talon SS https://talonairgun.com/forums/topic/trigger-honing-and-stoning/#post-130156 Sun, 13 Mar 2011 23:25:49 -0400 Pack

You say you have a Talon SS .177.
Can you shoot it above 2800psi with 12 PW and a 10 grain pellet?
My TSS does not shoot above 2400PSI 6PW with TS10 10.5 grain pellets.
They look like barracuda match but just cheap Gamo brand.
If you ever pull the valve off the tank I would be dead keen to see what you have insde 😕
BTW as to not Hijack…Read more

]]> 71ee835e3902719d0436ca0842a50329 techmod replied to the topic Got my Chrony today, it seems to malfunfuction in the forum General Chat https://talonairgun.com/forums/topic/got-my-chrony-today-it-seems-to-malfunfuction/page/2/#post-127949 Tue, 08 Feb 2011 22:00:10 -0400 I have purchased a Chrony,

Thank you Marmot_Malitia & SteveinLA.
With their help I was able to decide, buy & sucessfully use.

The pro chrono digital is definately worth its weight in gold.
Told me the plain facts when using my Condor & Talon SS.
Even worked inddors under incandescent lighting.
I am 100% happy with it.

]]> cbb96196cf508588d2b2ef82b32e6cc9 techmod replied to the topic How to empty bottle. in the forum Quick Reference https://talonairgun.com/forums/topic/how-to-empty-bottle/#post-127597 Tue, 01 Feb 2011 20:47:24 -0400 How to remove air with perfect control.

Firstly eat a can of beans then wait 4-6 hours 😆

Or:
Make a bush out of delrin or hard plastic.
I.D has to be big enough to sit over the Top Hat.
O.D has to be small enough (approx 3-5mm thick wall) to fit inside pump coupler or Dive bottle adaptor.
Length has to be about 8-12mm.
Place the bush on…Read more

]]> cc0fbb8ddd32918b748289c3ed7003f8 techmod replied to the topic Pro Chrono Digital by Competition Electronics in the forum General Chat https://talonairgun.com/forums/topic/pro-chrono-digital-by-competition-electronics/page/2/#post-122423 Thu, 11 Nov 2010 21:03:25 -0400 Bump

Scratch that, no need for anyone to put their hand up to help out a fellow AF rifle user.

I received my Pro Chrono Digital today 😀
I am super happy with it. Already shot it to bits and it registered the velocities. Now I’m going to buy some super glue and glue it all back together. Ahh No.
It is awesome I use it under normal incandescent…Read more

]]> 58c5d3dd448a935feb24e59ca66a128a techmod replied to the topic Talon SS Chrony #'s, Accuracy, Power Wheel Settings, Tophat. in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-chrony-s-accuracy-power-wheel-settings-tophat/#post-121232 Mon, 25 Oct 2010 20:16:14 -0400 I have found the top hat to have more consistancy & less damaging when snug or minimal play with a closed breech slide. This is returned back to factory setting. I have also modded the valve in the TSS tank.
My TSS will fire well with a Hiflow valve at high pressure, it needs about 6-8 on the pw. Going to reduce spring preload on the Valve and max…Read more

]]> a0a9f45e2c1fdbf003dedb6a030bf944 techmod replied to the topic In the mood for a new pistol... suggestions? in the forum General Chat https://talonairgun.com/forums/topic/in-the-mood-for-a-new-pistol-suggestions/page/3/#post-120835 Tue, 19 Oct 2010 21:20:45 -0400 I thought those numbers are awesome for a Co2.

Worth a look.
Gamo PT-85 SOCOM Or even the Gamo P-25 Tactical
The only thing I dont get off on is blow back!
However a blow job is quite different.
What I look for in a pistol.
Has to shoot pellets
Shot count
Velocity
Rifled barrel
Ergonomics
Reliability
Thats the main points the other points are…Read more

]]> 7c22b8e943687647267bbda6e580fba6 techmod replied to the topic Pro Chrono Digital by Competition Electronics in the forum General Chat https://talonairgun.com/forums/topic/pro-chrono-digital-by-competition-electronics/page/2/#post-120785 Mon, 18 Oct 2010 18:35:40 -0400 I am “Sold”.
Steve you should be a distributor 😛
The fact that it plugs into the lappy is a nice option.
Upload directly to [url=http://talonairgun.com]TAG[/url]

They are not on special anymore 😥
Who want’s to pick one up and ship it to New Zealand for me?
Pro Chrono Digital.

]]> a951becdd47f3db160505b2228eddf24 techmod replied to the topic Condor trigger safety. in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-trigger-safety/#post-120708 Sun, 17 Oct 2010 21:16:12 -0400 How to do it!
You have to be an Ace with a dremmel and flimsy little cut-off wheel.
Use safety specs cause if you blow a wheel it will f**k U up!!
The main thing to look for is to keep the cuts as square as possible.
Remove small amounts at a time (not too small) and check. The t-group pins can be hand fitted and removed, until satisfied with the…Read more

]]> 742ae2fc09de1abe24d44586541f34f1 techmod replied to the topic bottle dump/vel for 32g pell. at diff psi fills in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/bottle-dump-vel-for-32g-pell-at-diff-psi-fills/page/2/#post-120704 Sun, 17 Oct 2010 19:55:49 -0400 I have had some major problems with tank dumps on the Talon SS .177.
I had a dodgey valve from the get go. Marmot & Yellow Ninja have heard all about this, Funny thing, however interesting.
I have done the below valve mod to my Talon SS polising and porting…Read more

]]> dbbe6d15a147c6c74c7af19c616fdc73 techmod replied to the topic Condor trigger safety. in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-trigger-safety/#post-120697 Sun, 17 Oct 2010 18:49:34 -0400 I have sucessfully modded the safety on the Condor.
It can have max PW and still operate with just the trigger finger pushing forward with the back of your fingernail. Funny thing though, while I was modding I clicked, that if I kept dremmeling where I did it would not go off safe. Lol, about 1mm in it. Wonder if I will get those damn pic’s up somewhere.

]]> 60f01e380d93742dec341b778fecc4fb techmod replied to the topic Shrink fit frame-valve collar in the forum Mods/Machinists https://talonairgun.com/forums/topic/shrink-fit-frame-valve-collar/page/2/#post-120467 Thu, 14 Oct 2010 00:20:13 -0400 Too much variation.
Maybe a QC problem ?

]]> 8ba79937b0f566b20ccd935fe80cdf77 techmod replied to the topic Shrink fit frame-valve collar in the forum Mods/Machinists https://talonairgun.com/forums/topic/shrink-fit-frame-valve-collar/page/2/#post-120458 Wed, 13 Oct 2010 21:16:55 -0400 I had my tank retaining Collar in and out a few times.
Do you have 2 retaining screws in the pistol grip mount area??
My Condor had 2 grub screws retaining the collar.
I was worried about alignment when putting it back.
But it seemed to go back in the same place.
You could use some blue loctite around the collar to help.

I used to overtighten the…Read more

]]> 7f1e737fb431f9f88d729975e83fe6ee techmod replied to the topic Condor Convertible from .22 to .177SS in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-convertible-from-22-to-177ss/#post-120455 Wed, 13 Oct 2010 20:26:03 -0400 Lurker

Thnx M8 will do.

I dont think I have the problem yet but my TSS is fricken loud az, at the rifle. Will be eventually looking at Hushing it down some. After enough research will probably try to make a small baffle. After that I’m sure the loud gun problems will rare their ugly heads.

Cheers :thumb:

]]> 661dbf639b26a69385799c178cf20f83 techmod replied to the topic Scopes: What's the Deal on the Deal? in the forum General Chat https://talonairgun.com/forums/topic/scopes-what-s-the-deal-on-the-deal/page/4/#post-120454 Wed, 13 Oct 2010 20:15:39 -0400 quote SteveinLA:Wow Tech…that seems like a lot of work. So, you are trying to optically center the reticle, and then center the scope on the gun? I guess that’s to minimize the amount of adjustment needed to zero the gun/scope combo? Forgive me, I’m still learning.

CORRECT!
The 6-24×50 was new and factory set, by the Leapers factory in China…Read more

]]> afdacaa11296ebfa2abf313dd6e70dda techmod replied to the topic ping in the forum General Chat https://talonairgun.com/forums/topic/ping/page/2/#post-120412 Wed, 13 Oct 2010 04:15:31 -0400 quote tjbryner:I was woundering about this also.

Could you coat the inside of the tank with a liquid rubber? Something like this?

Would not try any chemical inside a pressure zone!! 😯

Some things ignite under extreme pressure!
Some things can ignite under low presure!!

]]> 9b5c24b2d7e41cbbf22982a06821654a techmod replied to the topic The Airforce Bottle Regulator is here! in the forum Mods/Machinists https://talonairgun.com/forums/topic/the-airforce-bottle-regulator-is-here/page/9/#post-120406 Wed, 13 Oct 2010 03:47:49 -0400 Want strings go to a stationary shop!!
Buy them in a ball!! 😛

Nice work M,M

]]> ddf37604851a894cea574f51318a6668 techmod replied to the topic Scopes: What's the Deal on the Deal? in the forum General Chat https://talonairgun.com/forums/topic/scopes-what-s-the-deal-on-the-deal/page/4/#post-120373 Tue, 12 Oct 2010 20:43:42 -0400 I have trued and mounted the Leapers scopes using the below method.

I got 2 leapers scopes 😮
Made a jig with an unused tri rail leveled & mounted in a vice.
Used bubble level for leveling, I don’t think this is critical.
Mounted accushot rings at the very rear end, basically very close together.
Used vinyl decal lining in place of the sticky…Read more

]]> 9608fd4b06ea7057e00f4f8508cddd13 techmod replied to the topic Condor Convertible from .22 to .177SS in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-convertible-from-22-to-177ss/#post-120372 Tue, 12 Oct 2010 19:05:26 -0400 Hey Just buy a Talon SS
Would be cool to see some links for the above mentioned Hammer slap & Top Hat o-ring damper.

I originally had the Condor then realized that it was not going to be quiet enough for back yard plinking. However just recently I removed the Hammer spacer to find the spring is the exact same part as used in the Talon SS. I…Read more

]]> e40da467aa5c195275d01e1ab94a9830 techmod replied to the topic I'm on a quest, I need your help. in the forum General Chat https://talonairgun.com/forums/topic/i-m-on-a-quest-i-need-your-help/#post-119878 Sat, 02 Oct 2010 19:46:15 -0400 Hi Marmot

They look pretty fancy, Marmot_Magician.
Your gear is top notch in my books. 😉

Just going to look at some nice scopes that dont break the bank.
Search Criteria:
50mm Obj’s
Adjustable zoom
4-32 minimum to max magnification range.
Mildot
Illuminated, optional.
Return to zero helpful.

Marmot_Militia is a damn straight…Read more

]]> 909fb0fdadd05c34e1f4668afc89f5f2 techmod replied to the topic Pro Chrono Digital by Competition Electronics in the forum General Chat https://talonairgun.com/forums/topic/pro-chrono-digital-by-competition-electronics/page/2/#post-119495 Wed, 29 Sep 2010 18:42:51 -0400 So.,

Where is the best place to buy the Pro Chrono Digital.
Are there any other models?

Ok I found some info on the Pro Chrono
Brand: Competition Electronics
Models:
Pro Chrono Pal
Pro Chrono Digital
Pro Chrono Paint Ball
Manufacturers Link: [url=http://www.competitionelectronics.com/pages/Prochrono_Digital.html]COMPETITION ELECTRONICS[/url]

]]> c07a655915d9862c9d130efb6105706c techmod replied to the topic Vented Shroud in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/vented-shroud/page/2/#post-118735 Mon, 20 Sep 2010 20:16:01 -0400 The Edgun looks awesome !

I was just about to buy a Shootng Chrony.
Better go look at the chrony section of the forum for some advice.

I found it and it wasn’t hard Thanks Steve!
Click link to go to Pro Chrono review.
[url=http://talonairgun.com/forum/viewtopic.php?t=16554]PRO CHRONO RESULTS[/url]

]]> 055e0d5634dfc4994ea8569c47fbabb0 techmod replied to the topic Scope Level Simple & Inexpensive in the forum Optics/Nightvision https://talonairgun.com/forums/topic/scope-level-simple-amp-inexpensive/#post-118096 Mon, 13 Sep 2010 21:12:23 -0400 quote 07condor22:http://www.talonairgun.com/forum/viewtopic.php?t=13186&highlight=kiss

This is another simple way to level a scope, you need a set of Automotive type feeler gauges, one with the individual blades. This method is recommended by Lowlight, NightForce, and Vortex.

This method may cost a bit more, but it is the most quick and simple…Read more

]]> c646bfb215dd857751ae56859318386d techmod replied to the topic Got My Tank back! in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/got-my-tank-back/#post-113878 Mon, 19 Jul 2010 21:21:16 -0400 I bought a new TSS and it had a leaky valve.
The Marmot_Militia Valve removal tool should be part of evryones kit.
Marmot_Militia is a very honest and helpful person 🙂

I pulled my valve off with a steel bolt of the same diameter as the hole opposite the burts disk. The valve housing was super tight. I took the rubber tank sleevs off first…Read more

]]> a2f0f7e4f81c38e554b5da432f07a8a5 techmod replied to the topic Bolt/Grub Screw Size in the forum Mods/Machinists https://talonairgun.com/forums/topic/bolt-grub-screw-size/#post-108388 Fri, 21 May 2010 00:23:25 -0400 The Grubs that hold the barrel were sized in Unified Nation Fine
I hope this is right I just found some data indicating 10-32 = 0.190
and 3/16UNF X ? 304 HEX SOCKET GRUBSCREW = 0.1875.
This seems a bit unusual as to sizes. Need to try some samples. if they fit nice and snug I will update this post.

]]> d815a673d9a95b64320c918b22217b87 techmod replied to the topic Got my Chrony today, it seems to malfunfuction in the forum General Chat https://talonairgun.com/forums/topic/got-my-chrony-today-it-seems-to-malfunfuction/#post-108234 Tue, 18 May 2010 20:09:49 -0400 RC

I have seen too many good reports on the CED.
There are 2 versions available and lots of parts.

Pro Chrony
http://www.midwayusa.com/viewProduct/?productNumber=852429.
The above model is not related to the CED M2.

The only other Chrony that was raved about was the Oehler no longer produced.
I’m keen on a CED but our damn money is worth a…Read more

]]> bb95f430b3f38057c026de9201ff7e91 techmod replied to the topic Got my Chrony today, it seems to malfunfuction in the forum General Chat https://talonairgun.com/forums/topic/got-my-chrony-today-it-seems-to-malfunfuction/#post-108231 Tue, 18 May 2010 19:46:20 -0400 I want to buy one of the Chrony units.
I was looking at the Beta cause its blue, from Manventureoutpost.com
But who knows, sounds like a tin of Gamo pellets.
You never know what your going to get.
I have seen some other units for more money however.
Considered buying the CED M2 but they are twice the price.

Re: Your battery on off.
Why dont you…Read more

]]> 9f48f3dd0a55f2af0df95f66fe4b4b85 techmod replied to the topic Low power "duds" shots in the forum Talon/Talon SS https://talonairgun.com/forums/topic/low-power-quot-duds-quot-shots/page/2/#post-107838 Thu, 13 May 2010 18:57:04 -0400 quote sawtime:Guys,

I personally like my TH where it is at 😯 😯 😯 😯

Sure, you can butter up the TH and be sure the breech is set right.

I think there is a much better way to address the issue.

Either get a super custom breech made that is right,

or,

why couldn’t there be an adjustable blade or what not with a slot…Read more

]]> aab8173e668626675e3b71f6691483f9 techmod replied to the topic Low power "duds" shots in the forum Talon/Talon SS https://talonairgun.com/forums/topic/low-power-quot-duds-quot-shots/page/2/#post-107677 Tue, 11 May 2010 22:25:28 -0400 quote packrat:Techmod….I assume your post wasn’t intended to tell me I’m wrong, but it DID come across that way to me forgive me if I misunderstood..

Looks like your saying dirt is on the outer part of the stem
Considering your pollen problem that is possible.

You are correct about not intentending to be the end all final word.
Just pointing…Read more

]]> d8977821f458265329d1ccf098657cf1 techmod replied to the topic Low power "duds" shots in the forum Talon/Talon SS https://talonairgun.com/forums/topic/low-power-quot-duds-quot-shots/page/2/#post-107618 Tue, 11 May 2010 03:57:44 -0400 Hmm, This is an ineresting finding.
The valve stem can be removed without dumping the air.
The Condor new gen valve stems are very thin as Walkon King has said in another post. Be careful tightening locking grub screws as you will dent and damage valve stems. Place a fitting drill bit or somthing similar while tightening Top Hat grubs. Use a light…Read more

]]> 0ddab57c45b4f56820318e4f9216e3e3 techmod replied to the topic Question on Scope Rings in the forum Optics/Nightvision https://talonairgun.com/forums/topic/question-on-scope-rings/#post-107491 Sun, 09 May 2010 20:45:43 -0400 Hi Bennee

What is your honest opinion about the feel of the Bushnell Legend.
How do the turrets feel? Repeatable resutls from clicking? Low light capability, quality of picture and focusing?
Does it have a sharp cross hair through all zoom ranges ??

I would realy like 6-24×50. The Legends all come with 40mm Obj’s I think
50mm Objs get very pricey.

]]> 31c8efdfe32f40d860bd71cc0e7c62f0 techmod replied to the topic Question on Scope Rings in the forum Optics/Nightvision https://talonairgun.com/forums/topic/question-on-scope-rings/#post-107240 Fri, 07 May 2010 03:51:55 -0400 I use RGPM-25H4[PY-A-635].
They are pretty good for the cost.
I don’t use the Tri-Rail with this setup.
I was just looking to buy some B-Square Airsporter low rings
and use with the Tri-rail. AF supply the medium rings with their scope package but I was to understand that they were too low. High was needed to get the 50mm Obj to clear the dovetail…Read more

]]> 718e6ff54a7adb82bd19af3326d8f35c techmod replied to the topic Countdown from 2000 in the forum Off Topic https://talonairgun.com/forums/topic/countdown-from-2000/page/50/#post-107128 Wed, 05 May 2010 20:07:47 -0400 1285

]]> d0f4eccbc75b83cdf2773f237ad054ea techmod replied to the topic Airforce Piccanty rail modification... in the forum Mods/Machinists https://talonairgun.com/forums/topic/airforce-piccanty-rail-modification/page/2/#post-106976 Tue, 04 May 2010 04:45:16 -0400 I think if you reside in the USA you can purchase AF replacement parts. Directly from Airforce.
I am not sure exactly who can help you more but you will not need to savage the Condor 😀 , Just buy the parts you need.

]]> 002229961e5899ec60c0a64d13e42f32 techmod replied to the topic Airforce Piccanty rail modification... in the forum Mods/Machinists https://talonairgun.com/forums/topic/airforce-piccanty-rail-modification/page/2/#post-106828 Sun, 02 May 2010 21:06:09 -0400 Hi,..

Is making a totally new frame out of the question! Using better material ? ❗

]]> 18cbb6bf4f32b53b3717df13ebb738e1 techmod replied to the topic EXPERT AIR ??? in the forum General Chat https://talonairgun.com/forums/topic/expert-air/page/4/#post-106276 Mon, 26 Apr 2010 20:15:29 -0400 Eh!

This is awesome information. Just take the information, without the curly bits, lesson learned. However mentally screwed in. With Voltars way you can be damn sure its mentally etched in for life. Its not a bad thing, just his way. Sure he wanted to correct you 100% and never see this ever happen again. Or see you or anyone become anything…Read more

]]> 4ec36cbca63c40fb304278ec883d03b9 techmod replied to the topic New section coming - input needed in the forum General Chat https://talonairgun.com/forums/topic/new-section-coming-input-needed/page/4/#post-105823 Thu, 22 Apr 2010 20:39:31 -0400 quote TeflonTron:Thanks for the input and support, guys. I will create a sub section for Other Guns, I think, and put Big Bores and Edgun in there. I very much want to talk with Matador’s owner as well, with a mind for a mutually beneficial helping. You know, Perestroika and all that.

Sorry if I may have come across as snappy in this thread. That…Read more

]]> e3ef600b008dc8b7535da5dcd634384e techmod replied to the topic Benjamin Pump ??? in the forum General Chat https://talonairgun.com/forums/topic/benjamin-pump/#post-103883 Tue, 06 Apr 2010 02:15:56 -0400 Ever since reading about pump faliures I have been quite paranoid about my AF pump. How ever the Airforce Pump was made by Logun/FX.
It is damn near identical to FX current 3 stage, now surpassed by the new four stage. I am waiting for Jeff to show his rebuild pics and how to…Read more

]]> 1fce77913d7d78111ec340bc9cc3f15e techmod replied to the topic At what PSI do you see max FPS? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/at-what-psi-do-you-see-max-fps/#post-103866 Tue, 06 Apr 2010 00:30:14 -0400 I have done numerous shots with 15.4 grain pellets.
Always fill to 3k it seems with power wheel at 0 the first 30-35 shots are below Sonic after the 30 put through it starts to go sonic.
At around 50 shots (usually time to fill the tank) the pressure is down to approx 2k. Unfortunately I do not have a chrony yet. But once you get the pattern after…Read more

]]> e3c29c41507f6dcf4db8c94725c50657 techmod replied to the topic barrel bushing size in the forum Quick Reference https://talonairgun.com/forums/topic/barrel-bushing-size/#post-103470 Wed, 31 Mar 2010 03:49:20 -0400 Just pulled the Bushings from my Condor.
They were slightly under expected size to fit perfectly in the frame.
The barrel would not center in end cap 100%, visualy noticeable.
The factory endcap is also on the list for remodel.

Factory Bushing Size:
O.D: 1.0100″ / 25.65mm
I.D: 0.6290″ / 15.98mm
WIDTH: 0.5010″ / 12.72mm
Would like to make them a…Read more

]]> 09f8620d2ebdc1abfbcc1cc50b9e14fd techmod replied to the topic Status of the E-TaCREG and other musings. in the forum Mods/Machinists https://talonairgun.com/forums/topic/status-of-the-e-tacreg-and-other-musings/page/3/#post-102479 Thu, 18 Mar 2010 22:32:24 -0400 Hi
I have been searching high and low for a suitable airtank to run the T/C.
I see the problem with the AF tanks. Price and not the best valves.
There are some options that I would like to mention hope its not off topic.
I would also like to see some other input about tank/reg/valve options.

1. Obviously JD 53Ci is way suitable
2. 48-62 Ci HPA…Read more

]]> 77f3d62697d5a4bd3289aac998ffc7f5 techmod replied to the topic supersonic next step in the forum Mods/Machinists https://talonairgun.com/forums/topic/supersonic-next-step/page/2/#post-101618 Tue, 09 Mar 2010 02:15:43 -0400 quote Stickbow:There’s a guy and his buddies from New Zealand, they are hot rod kings in airgunning…he posts on youtube…people write in to him telling him he’s crazy and falsifying his results, but he’s not…There’s an exanix ar-6 getting 1300fps+….They have something going on down there…and he’s not concerned with going over SS….check…Read more

]]> d87e848dc662646729d1b86da6fe2022 techmod replied to the topic Links for Talon disassembly / assembly in the forum Talon/Talon SS https://talonairgun.com/forums/topic/links-for-talon-disassembly-assembly/#post-101612 Tue, 09 Mar 2010 01:04:07 -0400 Translate with http://translate.google.com/#

Awesome work JKal.
Nicely documented.
The pictures on the newspaper are a little hard to see.

http://translate.google.com/

]]> 9df603cd3bdd0da1912eaf54c1252118 techmod replied to the topic Can anyone shed any light on this cti "moderated" in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/can-anyone-shed-any-light-on-this-cti-quot-moderated-quot/#post-101133 Wed, 03 Mar 2010 23:18:25 -0400 Hi,
I purchased from them.
Thrilled and dissapointed all at the same time.
Its messed up thing.

]]>