Talonairgun | tejani | Activity https://talonairgunforum.com/members/tejani/activity/ Activity feed for tejani. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 924da5933a5a67cca70f2d70198ff6bb tejani replied to the topic Cricket stock ? in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-stock-d9/#post-252974 Fri, 13 May 2016 00:46:36 -0400 Yes with some friends

]]> 973e5191d9778b8f1acde95ea85bf489 tejani replied to the topic Broken magazine holder in the forum Kalibrgun https://talonairgun.com/forums/topic/broken-magazine-holder/page/2/#post-249014 Thu, 17 Mar 2016 17:06:08 -0400 Finally the holder has arrived
Thank u Gku

]]> cf6800e9be259a6ee632c238112444fd tejani replied to the topic Broken magazine holder in the forum Kalibrgun https://talonairgun.com/forums/topic/broken-magazine-holder/page/2/#post-248445 Fri, 11 Mar 2016 21:14:04 -0400 Hi Mr Greg
Alot of thanks for your care about me
The package didn’t arrived get
I was asking about the type of mail that you have used to sent the package?

]]> 12e0a9ed2132eadfd7a4d45444e0bc75 tejani replied to the topic Broken magazine holder in the forum Kalibrgun https://talonairgun.com/forums/topic/broken-magazine-holder/page/2/#post-246757 Sun, 21 Feb 2016 13:53:11 -0400 The best way to feel happy is to giver others happiness

]]> c6b9daebffedd3b34865afdd9e976dd9 tejani replied to the topic Broken magazine holder in the forum Kalibrgun https://talonairgun.com/forums/topic/broken-magazine-holder/#post-246590 Thu, 18 Feb 2016 17:49:27 -0400 Greg is a real great man
A lot of thanks

]]> 4f4c36e2fd53064eee2bb7e3a9054771 tejani replied to the topic Broken magazine holder in the forum Kalibrgun https://talonairgun.com/forums/topic/broken-magazine-holder/#post-246492 Wed, 17 Feb 2016 19:20:43 -0400 quote GKU:quote tejani:I am talking about the holder not the magazine itself
The bulldog stock
I am from Egypt

I believe this is what you’re looking for Doc, it’s a complete KG original BP mag holder very new hardly used with all the magnet intact too ?
I never sent something to Egypt before, just PM me your address and I’ll send it to you for…Read more

]]> c381654fab56e5eb6bdd3697133fd39b tejani replied to the topic Broken magazine holder in the forum Kalibrgun https://talonairgun.com/forums/topic/broken-magazine-holder/#post-246435 Wed, 17 Feb 2016 00:03:49 -0400 I am talking about the holder not the magazine itself
The bulldog stock
I am from Egypt

]]> bb612b62dfb67e2ba5c9b1f22e3a3261 tejani replied to the topic Broken Carbine Cocking Plate in the forum Kalibrgun https://talonairgun.com/forums/topic/broken-carbine-cocking-plate/#post-243591 Sat, 16 Jan 2016 21:49:53 -0400 I will ask about the cost Mr GKU and will tell u

]]> 0204c3bfba397e6359d1a6df452a60e4 tejani replied to the topic Broken Carbine Cocking Plate in the forum Kalibrgun https://talonairgun.com/forums/topic/broken-carbine-cocking-plate/#post-243588 Sat, 16 Jan 2016 20:53:34 -0400 I had a friend here in Egypt who had this part proken and we have made it by a CNC machine locally in egypt

]]> 59161648ad06df0756c270b43f670ab2 tejani replied to the topic Valve stem homemade in egypt in the forum Kalibrgun https://talonairgun.com/forums/topic/valve-stem-homemade-in-egypt/#post-242839 Mon, 04 Jan 2016 21:50:20 -0400 Soon I will try

]]> 319304921dcaf1aed80c645882b9bd71 tejani replied to the topic Valve stem homemade in egypt in the forum Kalibrgun https://talonairgun.com/forums/topic/valve-stem-homemade-in-egypt/#post-242813 Mon, 04 Jan 2016 12:49:06 -0400 Till now I can’t find titanium
But i noticed that my valve stem extra weight is in the cap not the rod

]]> 8e9ddebddd412f5b921377bb0a17547d tejani replied to the topic Valve stem homemade in egypt in the forum Kalibrgun https://talonairgun.com/forums/topic/valve-stem-homemade-in-egypt/#post-242807 Mon, 04 Jan 2016 11:53:56 -0400 I am already have the first plastic original valve but it was broken and I have got the aluminum one from kwiet
The original plastic one is 2.7 gm
The aluminium one is 3.6 gm
The one I have made is 6 gm stainless steel :suprisedn:

]]> b9637d6df1e530c1daa062173ac67659 tejani replied to the topic Valve stem homemade in egypt in the forum Kalibrgun https://talonairgun.com/forums/topic/valve-stem-homemade-in-egypt/#post-242648 Fri, 01 Jan 2016 22:41:29 -0400 Hi GKU
Thank u for your answer
Sure I will post pictures after I got reasonable one

]]> 91b05db932f30fbfe03978a2446a804f tejani replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/page/2/#post-241089 Sat, 12 Dec 2015 05:57:47 -0400 unfortunately there is no dealers in Egypt
i got it from Kuwait by an indirect way
air gunners in Egypt depend completely on themselves in fixing or maintaining their guns

]]> d193cf35eaec60a51f7877d20382e598 tejani replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-241069 Sat, 12 Dec 2015 01:58:28 -0400 https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTHktjiNLG2HsJPz9XIVnTbwERcZLQzX2Irj6SUOKt4KGByQ8KueZr2ckZx
I used 2 of this washer between the trigger guard and the screw and it works
The problem was over tightening of the trigger guard screw .
But the screw make a dimpling in the trigger guard :4:
I am afraid that this trigger guard will…Read more

]]> f302d689307988f773d8e7905a1e5124 tejani replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-240981 Thu, 10 Dec 2015 17:19:31 -0400 No affection in the poi

]]> 6822197649fcbf71276f71af8ed225b4 tejani replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-240962 Thu, 10 Dec 2015 10:20:59 -0400 I alreadey found that I had one fixed in the stock
I glued it and try to adjust the rear and front screws
Now there is no movement but still liitle space between the tank and the stock

]]> 2c92b207514e94f13fa7df3c22fb6e47 tejani replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-240930 Wed, 09 Dec 2015 21:14:34 -0400 quote Strietwise:I had the same problem. I found the issue to be the tightness of the screw that connects the stock to the gun and the bedding of the metal flange and the stock. If the screw that pulls the stock and gun together and the bedding are not exact it can force the air tube and barrel together. For me the solution was to glue a…Read more

]]> 06712a57b039648e08a7183429d36fe7 tejani replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-240926 Wed, 09 Dec 2015 20:03:43 -0400 http://s29.postimg.org/d2l556daf/IMG_20151209_215857.jpg
Is this space normal between the stock and the tank?

]]> e5b3c37093d1ff83a8a0689942ead3ea tejani replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-240915 Wed, 09 Dec 2015 18:16:32 -0400 Which one?

]]> 0a95de5a333e1b33121ee5bfe04408be tejani replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-240905 Wed, 09 Dec 2015 15:15:01 -0400 The gun is brand new and the shroud is not loose this little movement between the tank and the front of the stock ..little movement UB and down …is the adjustment of rear screw will affect this movement?

]]> 26f1cd82774ae5a96b30591756094794 tejani replied to the topic My stock loose a little at the front in the forum EdGun https://talonairgun.com/forums/topic/my-stock-loose-a-little-at-the-front/#post-240902 Wed, 09 Dec 2015 14:34:50 -0400 My matodor Is 0.25 long

]]> 968b2bea26d5ac1ffca9c621ad6fac50 tejani replied to the topic Laminate stocks for Edgun Matador in the forum EdGun https://talonairgun.com/forums/topic/laminate-stocks-for-edgun-matador/#post-240831 Tue, 08 Dec 2015 00:03:28 -0400 I prefer the walnut

]]> 94c5314a5093ce6fb2c5d5246a7769cf tejani replied to the topic New 0.25 r3m matador in the forum EdGun https://talonairgun.com/forums/topic/new-0-25-r3m-matador/#post-240751 Sun, 06 Dec 2015 17:09:14 -0400 Alot of thank mr GKU
That was very informative

]]> ce16f6f5810a3bc384dc39fe93569851 tejani replied to the topic New 0.25 r3m matador in the forum EdGun https://talonairgun.com/forums/topic/new-0-25-r3m-matador/#post-240737 Sun, 06 Dec 2015 09:09:08 -0400 Hi GKU still remembering me 🙂
Thank u for your help I will try but what is the size in mm of the #8 oring
Another question
What is the Allen key screw at the rear of the stock for?

]]> 35560e0594882802082d5892cff9a49b tejani replied to the topic New 0.25 r3m matador in the forum EdGun https://talonairgun.com/forums/topic/new-0-25-r3m-matador/#post-240725 Sun, 06 Dec 2015 02:24:42 -0400 The leak not between the hose and the probe
It is between the probe and the tank

]]> 89fd22a1f0c99dbe7a455d02e14facd3 tejani replied to the topic hammer spring versus valve stem versus rgulator adjustment in the forum Kalibrgun https://talonairgun.com/forums/topic/hammer-spring-versus-valve-stem-versus-rgulator-adjustment/page/3/#post-219378 Sat, 14 Feb 2015 15:44:52 -0400 quote GKU:quote tejani:quote GKU:.

😆 i am not Norwegian
i am egyptian i am really satisfied with my results because here in egypt we don’t have 18 grain pellets ,you helped me alot, i admire your effort to repair my cricket
my only problem that i am an anaesthetist always on call 🙂 so dont have enough time to read all your fantastic…Read more

]]> 2fa1f2f6acfe90666d0df27cee48b037 tejani replied to the topic hammer spring versus valve stem versus rgulator adjustment in the forum Kalibrgun https://talonairgun.com/forums/topic/hammer-spring-versus-valve-stem-versus-rgulator-adjustment/page/3/#post-219348 Fri, 13 Feb 2015 22:20:40 -0400 quote GKU:.

Hey guys I think you miss read tejani posts he wrote the below,

now my reg at 110 bar the valve 2 turns from contact

i can reach 290 m/s with hst with using 15 grain pellets 0.22 caliber

my reg from base to top is 53.4 mlm

I don’t think he followed my post instructions exactly ?
But he might be satisfied with what he ended up…Read more

]]> a32c4e52f56cd0823a203a2367041ae6 tejani replied to the topic hammer spring versus valve stem versus rgulator adjustment in the forum Kalibrgun https://talonairgun.com/forums/topic/hammer-spring-versus-valve-stem-versus-rgulator-adjustment/page/2/#post-219246 Thu, 12 Feb 2015 15:03:11 -0400 i am using 15 grain pellette

]]> e1f834837297a9cec86aaddcf7714281 tejani replied to the topic hammer spring versus valve stem versus rgulator adjustment in the forum Kalibrgun https://talonairgun.com/forums/topic/hammer-spring-versus-valve-stem-versus-rgulator-adjustment/#post-219217 Thu, 12 Feb 2015 02:31:20 -0400 no 0.22 caliber

]]> 5f4dac0a0f2bd7c2b8605f2d9893500e tejani replied to the topic hammer spring versus valve stem versus rgulator adjustment in the forum Kalibrgun https://talonairgun.com/forums/topic/hammer-spring-versus-valve-stem-versus-rgulator-adjustment/#post-219203 Wed, 11 Feb 2015 22:59:33 -0400 quote GKU:tejani,

How is it going ?

~ GKU
now my reg at 110 bar the valve 2 turns from contact
i can reach 290 m/s with hst with 1 g pellette
thank u for your great support
my reg from base to top is 53.4 mlm

]]> cfe6735dbc2dfd6dfc72b05a00e117e2 tejani replied to the topic hammer spring versus valve stem versus rgulator adjustment in the forum Kalibrgun https://talonairgun.com/forums/topic/hammer-spring-versus-valve-stem-versus-rgulator-adjustment/#post-219046 Mon, 09 Feb 2015 12:12:45 -0400 I got your advice but . I was already deassemble my regulator .

]]> 4d5da4215d1f892a1621b153a468ab16 tejani replied to the topic hammer spring versus valve stem versus rgulator adjustment in the forum Kalibrgun https://talonairgun.com/forums/topic/hammer-spring-versus-valve-stem-versus-rgulator-adjustment/#post-219042 Mon, 09 Feb 2015 09:52:38 -0400 I dont have a regulator tester tool
but by using the chrono the regulator begin to drop velocity at about 85 bar

]]> fa5fa64b96804437765531bdd203f7f0 tejani replied to the topic cricket persistent leak in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-persistent-leak/#post-218882 Sat, 07 Feb 2015 00:02:15 -0400 Great forums . Thank you very much

]]> e42b8a39485bca4c8ab793c2d0622b67 tejani replied to the topic cricket persistent leak in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-persistent-leak/#post-218881 Fri, 06 Feb 2015 23:34:38 -0400 Thank u…i got it it was the oring at the base of the stem

]]> 1b75648c278ed461fc53f0fb836a116a tejani replied to the topic cricket persistent leak in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-persistent-leak/#post-218844 Fri, 06 Feb 2015 07:54:25 -0400 How to remove circlip#10 piece?

]]> 1a1985e11d32941ec9cfd19a2f3890b5 tejani replied to the topic cricket persistent leak in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-persistent-leak/#post-218824 Fri, 06 Feb 2015 00:24:40 -0400 I will replace 11 and 15 I think it is regulator failure

]]> 005dce60fff98a72261bd1fe48c380da tejani replied to the topic cricket persistent leak in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-persistent-leak/#post-218795 Thu, 05 Feb 2015 16:41:08 -0400 i used the 3.1 x 24.4 o’rings but still leaking from the same hole
what i noticed is the air push the regulator forward in spite of the presence of the spacer number 9 in the diagram but the regulator is moving with pressure for about 1 mill allowing the air to leak
i am really astonished i didnt replace that spacer so what happened?

]]> f8a9e621d600fc3e657416ae287bf720 tejani replied to the topic Cricket Hammer spring adjuster in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-hammer-spring-adjuster/page/6/#post-210880 Thu, 18 Sep 2014 21:29:29 -0400 Need one in egypt impu

]]> 2cf0e9e490944b16e2c938372a2aa095 tejani replied to the topic Mag loading made easy-er with Oring in the forum Kalibrgun https://talonairgun.com/forums/topic/mag-loading-made-easy-er-with-oring/page/2/#post-210310 Sun, 07 Sep 2014 23:10:41 -0400 I tried this oring size but seems not to fit in place

]]> f69ab1a638def4693f3be0b49664cdc5 tejani replied to the topic very bad injury to my friend's cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/very-bad-injury-to-my-friend-s-cricket/page/2/#post-204646 Wed, 11 Jun 2014 14:30:18 -0400 I hope this file can help

]]> 215543413b91915b4192773a46309f84 tejani replied to the topic very bad injury to my friend's cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/very-bad-injury-to-my-friend-s-cricket/page/2/#post-204376 Thu, 05 Jun 2014 20:29:47 -0400 This is autocad file of the proken pieceAttachments:cricket spare part.rar

]]> e6af9f6263e717d212c314f764fc4a3c tejani replied to the topic Cricket Exploded view with magazines in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-exploded-view-with-magazines/#post-204321 Wed, 04 Jun 2014 20:42:52 -0400 quote Zonk:Hoot: take the two O-rings off of mags and replace them with one 2.5mm x 27mm and they stay nice and snug in mag holders.

[url=http://s40.photobucket.com/user/Zonks1/media/518111893_zps1d608ad8.jpg.html
[/url]

best thing I ever did………….. 😀

Zonk
I replaced the orings but it didnt work for me.the magazine cant get in the…Read more

]]> fcc627dc18e921b1d807f245a1660680 tejani replied to the topic very bad injury to my friend's cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/very-bad-injury-to-my-friend-s-cricket/page/2/#post-204192 Mon, 02 Jun 2014 07:16:18 -0400 quote octavius:Problem will be when you want to get new piece back. I think without removing those two pins it will be impossible. 😉
Now I understand your idea about the 2 pins
We have welded the broken piece
But realy imbossible to get it back without removing the pins
Now any idea or help how can remove the pins
😳

]]> fc48623f218e4128b75012c1f9a37a9e tejani replied to the topic TalonTunes Is Now A Kalibrgun Dealer in the forum Kalibrgun https://talonairgun.com/forums/topic/talontunes-is-now-a-kalibrgun-dealer/page/2/#post-204100 Fri, 30 May 2014 09:07:38 -0400 What about spare parts?

]]> e3db1acfda42a0ce8c1447d932d792d6 tejani replied to the topic very bad injury to my friend's cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/very-bad-injury-to-my-friend-s-cricket/#post-204080 Thu, 29 May 2014 22:25:43 -0400 We use ernest video to get this piece out of the breech

]]> 51c6bf0aa937ce51cb15c2d6d56beabe tejani replied to the topic very bad injury to my friend's cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/very-bad-injury-to-my-friend-s-cricket/#post-204014 Wed, 28 May 2014 20:01:07 -0400 In our country it was very difficult to get our crickets
Only 2 pieces
Where can I order this part ?
We ordered our crickets from airgun of arizona

]]> 11a907bd4073f0a9f5feb11c9d06690b tejani replied to the topic very bad injury to my friend's cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/very-bad-injury-to-my-friend-s-cricket/#post-203988 Wed, 28 May 2014 13:32:25 -0400

]]> e2380eddd4780de253dff52a8ab0ddbf tejani replied to the topic very bad injury to my friend's cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/very-bad-injury-to-my-friend-s-cricket/#post-203986 Wed, 28 May 2014 13:26:30 -0400 Plate cocking piece number 45
The part which cock the hammer fractured 🙁

]]> 16920bab8a18a77ff7d14f5a8768e69b tejani replied to the topic Cricket Hammer Degaser Tool Video in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-hammer-degaser-tool-video/page/2/#post-203166 Fri, 09 May 2014 22:50:19 -0400
Ernest tool done in egypt 🙂

]]>