Talonairgun | the-cad | Activity https://talonairgunforum.com/members/the-cad/activity/ Activity feed for the-cad. Thu, 09 Jul 2026 01:06:06 -0400 https://buddypress.org/?v= en-US 30 hourly 2 a12558c2af0f39f6e1585559c2229841 the-cad replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/14/#post-272643 Mon, 20 Nov 2017 01:25:23 -0400 quote shooter3:I’ve tested JSB King Heavies MKII in Ed’s lightly choked barrel. The speed was 235ms. The accuracy at 50m is horrible. Do you think bumping the speed up should tighten the groups down?
Just a thought πŸ˜‰ looking back through the first posts Wingman appeared to be using the JSB β€˜mark 1’ heavies in.25 and not the mark 2’s that…Read more

]]> d2c9afecd0ccc75859baa3a80ca58f74 the-cad replied to the topic Help with .22 R3M in the forum EdGun https://talonairgun.com/forums/topic/help-with-22-r3m/#post-268545 Sun, 16 Apr 2017 23:16:14 -0400 I know this thread is about the Lelya, but the matador offset moderator is attached using the same method..

http://talonairgun.com/forum/viewtopic.php?f=34&t=33470

If clipping is suspected it could be worth a shot (no pun intended πŸ˜‰ )
Gregs method with the tape works quite well to discount clipping :8:
Just a thought, when the offset mod…Read more

]]> 1b7402072a27057240703cd90ae60e1c the-cad replied to the topic Edgun Leshiy .25cal super tune in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy-25cal-super-tune/page/4/#post-265980 Mon, 06 Feb 2017 22:53:11 -0400 quote bmd:Thank you πŸ™‚
What pressure is recommended for say .25? I use both .177 and .25 but I believe I have to set it to different pressure for the two calibers?

The link to the ‘sticky’ should be here..

http://talonairgun.com/forum/viewtopic.php?f=34&t=35912

It’s around the 110 bar mark for best results on a .25 if I remember correctly, the…Read more

]]> c97ceb1e1f9d01c791365368c37cd739 the-cad replied to the topic Edgun Leshiy .25cal super tune in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy-25cal-super-tune/page/3/#post-265975 Mon, 06 Feb 2017 22:34:50 -0400 Here you go…

https://www.huma-air.com/Edgun-Leshiy-pressure-regulator

Enjoy… :4:

The Cad

]]> 3fe68b40dada5bc36a721c6bc9a35665 the-cad replied to the topic Edgun R3m offset moderator availability in the forum EdGun https://talonairgun.com/forums/topic/edgun-r3m-offset-moderator-availability/#post-262197 Mon, 28 Nov 2016 18:25:23 -0400 If in the UK try these :

http://en.shop.dase.fi/product/81/edgun-moderator

Looks like both .22 and .25 are in stock as well πŸ˜‰

You could always get in touch with Ed direct and he will see if there are any available in his Estonia workshop πŸ˜€

The Cad

]]> d3cf6c285dce25b7425cb5d88e39aed4 the-cad replied to the topic A forgetful oldgoat needs help in the forum EdGun https://talonairgun.com/forums/topic/a-forgetful-oldgoat-needs-help/#post-260408 Fri, 28 Oct 2016 21:54:50 -0400 Good to see you back Oldgoat !

If I recall correctly it’s all about balancing the HST with the set reg pressure- the goal being the max pellet speed (around the 880/890 fps mark) being achieved when winding the HST in gives you little or no more than the max desired speed. This is the most efficient setting goal.
When faffing around with the reg…Read more

]]> 2fa926c76ab1d2331c86004a4f7e8459 the-cad replied to the topic Pics of Leishiy in the forum EdGun https://talonairgun.com/forums/topic/pics-of-leishiy/page/2/#post-259930 Mon, 17 Oct 2016 21:55:02 -0400 quote PiterM:quote tbear:Comparing Leishy to the Ataman M2R Cartbine Ultra compact,the Ataman wins overwhelmingly.
I think you’re missing the whole point… with about 35cm total length (folded) Leshiy would fit into my laptob bag right next to my lunch. Ataman (or anything else) is not even close πŸ˜‰
The Leshiy would fit in my laptop bag in order…Read more

]]> d95aea636539de8a062d9971e52e261b the-cad replied to the topic Pics of Leishiy in the forum EdGun https://talonairgun.com/forums/topic/pics-of-leishiy/#post-259756 Thu, 13 Oct 2016 21:55:37 -0400 …and in action !

https://youtu.be/lHtCThm5Btk

The Cad

]]> cebe73e0bfd1800010989a27f17e3458 the-cad replied to the topic Regulator settings (and a couple of questions about the 22 cal R3M) in the forum EdGun https://talonairgun.com/forums/topic/regulator-settings-and-a-couple-of-questions-about-the-22-cal-r3m/#post-257267 Thu, 11 Aug 2016 22:08:49 -0400 One of the posts I always refer back to regarding the .22 Matador and ideal speed and reg setting. Loads of info in this which I would say most of us on here have benefitted from.

http://talonairgun.com/forum/viewtopic.php?f=34&t=22808

Mine was 130 bar as well, I tend to set the speed at 890-900 fps with JSB 18.1 ‘s and this seems to work for…Read more

]]> ba2aebfe791176fd4b4cca3a61802fde the-cad replied to the topic First Shot - R3M in the forum EdGun https://talonairgun.com/forums/topic/first-shot-r3m/page/2/#post-255529 Sun, 26 Jun 2016 08:51:26 -0400 quote Hemn:quote The Cad:quote Pippo:In one way or another, there has always been somebody before…..
The chicken or the egg…
πŸ˜‰

The Cad

The chicken ,,, πŸ˜‰
…and who made the road ?

πŸ˜‰

The Cad

]]> baea92683a83024422f51c37927a527e the-cad replied to the topic First Shot - R3M in the forum EdGun https://talonairgun.com/forums/topic/first-shot-r3m/page/2/#post-255489 Sat, 25 Jun 2016 12:46:54 -0400 quote Pippo:In one way or another, there has always been somebody before…..
The chicken or the egg…
πŸ˜‰

The Cad

]]> 6bffebd4cfb50d392b168be2182fc0ce the-cad replied to the topic Another EDgun dealer in USA in the forum EdGun https://talonairgun.com/forums/topic/another-edgun-dealer-in-usa/#post-251903 Tue, 26 Apr 2016 19:47:03 -0400 This can only be accepted as good news !
Keyser has a good working knowledge of EDguns and his enthusiasm and videos have been very useful to all of us πŸ˜€

I, for one, wish him every success with his new venture and hope others will join me in congratulating him in being a more than worthy member of the EDgun team :thumb:

Is there an…Read more

]]> b1bfd170ca907c1c99b46418c1de67db the-cad replied to the topic Off set moderator height in the forum EdGun https://talonairgun.com/forums/topic/off-set-moderator-height/#post-250769 Mon, 11 Apr 2016 21:11:32 -0400 quote keyser soze:quote Blacknsilver:That’s a pain in the arse. I can fit the moderator but I will have to lose the sunshade.

Aren’t you from the UK? How often do you need a sunshade? 2x a year ? :rofl:

‘Sunshade’ could be a bit misleading, more likely a ‘Rainshade’ πŸ˜‰

The Cad

]]> 361f38b0e35848dddebed8e1aa9e19bd the-cad replied to the topic Need help...short or Standard in the forum EdGun https://talonairgun.com/forums/topic/need-help-short-or-standard/#post-250748 Mon, 11 Apr 2016 14:12:38 -0400 Hi Frank,

You have probably seen this before, but just in case you haven’t πŸ˜‰

I have R3 in standard (.22 & .25) and long myself, being a collosal 5’8″ in height I do find the standard fits just that little better – It just depends what you are going to do with it – shoot from a vehicle, hide shooting, stalking…Read more

]]> 458ccf150382654d2a1fa3511b681714 the-cad replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/12/#post-250574 Fri, 08 Apr 2016 11:24:38 -0400 I like good news on a Friday :winkn:

Thanks for the update Ed, appreciate your efforts with this and fingers crossed the tests are passed with flying colours :thumb:

The Cad

]]> c96cbce93b9f4977275a036c87ff26e0 the-cad replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/10/#post-249932 Tue, 29 Mar 2016 23:24:41 -0400 Someone has been busy πŸ˜‰

The Cad

]]> fcd1990d5b621e92bed654ec16e6f256 the-cad replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/10/#post-249613 Wed, 23 Mar 2016 09:39:21 -0400 Hi Ed,

You were right with ‘sneeze’ – some would even say weak fart πŸ˜‰

Hardened skin through repeated pressure or friction (or using Leshiy at 16J) is called calluses πŸ™‚

In fairness your English is far better than my Russian, well done Ed and thanks for the demonstration and explination :thumb:

The Cad

]]> 15f9eeda0f21cbc8f62c64b0c551be8d the-cad replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/9/#post-249515 Tue, 22 Mar 2016 08:21:04 -0400 Ed,

Appreciate you risking certain death in the quest for the truth and education of ‘experts’ :winkn:

Good video Ed :thumb:

The Cad

]]> 8b452dffdafec982158c9ef0a1aa6333 the-cad replied to the topic How EDguns are made? in the forum EdGun https://talonairgun.com/forums/topic/how-edguns-are-made/#post-249382 Mon, 21 Mar 2016 00:45:22 -0400 quote the sloth:Ed, thank you for sharing your pictures and a bit of history. Factory tours are cool and it’s neat to see how things are made

Plus they take care of their employees. Ed, don’t let your workers see Chris King’s gourmet kitchen or they may want you to cook steaks for lunch :rofl:
…and give them that nice girls number :wink:…Read more

]]> 2c7b390cc5e5d6af13f742ab51fa471d the-cad replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/7/#post-249379 Mon, 21 Mar 2016 00:36:15 -0400 quote Nomadic Pirate:Ed is Classic !!!!

Funny guy indeed and I always thought that, I would buy an Edgun just because I like the guy :8:
+1 on that :dito:

And yes, I do buy his guns and enjoy them as much as I can πŸ˜‰

Keep up the good work Ed, I’m one of your ‘happy silent clients’ :thumb:

I’m looking forward to hunting down a few…Read more

]]> eae86a930e05d037dddf55a4622863e1 the-cad replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/6/#post-249194 Sat, 19 Mar 2016 13:56:19 -0400 quote Pippo:The Cad,

rest assured that with adeguate pictures and reviews we could even sell a product like “Litvinenko’s Tea” in the UK πŸ˜€

Just look around…

“Litvinenko’s Survival Tea, the tea that keeps you warm for 138 days”. :8:

(Just for kidding on the power of advertising, no intention to make fun out of a dead guy in any…Read more

]]> a96b75f40a5895b83b3d7deff5c3dcce the-cad replied to the topic EDgun Leshiy in the forum EdGun https://talonairgun.com/forums/topic/edgun-leshiy/page/6/#post-249190 Sat, 19 Mar 2016 11:47:47 -0400 “Here’s your ‘herbal tea’ Mr Litvinenko, it’s quite strong but it doesn’t go cold for 138 days”

Should have gone for PG Tips…

http://www.pgtips.co.uk/product/category/292161/black-tea

National drink for the UK guys :winkn:

As for the UK food…

https://www.greggs.co.uk/menu/pasties-and-bakes/sausage-rolls/

😯 😯 😯

The Cad

]]> c5ceac738b28dd9cfb850ab873bc35dc the-cad replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/10/#post-249076 Fri, 18 Mar 2016 08:10:38 -0400 quote Ed:Updated information from the productions department:

ΡˆΡ‚ΠΈΡ„Ρ‚Ρ‹ Π½Π° Π 3М (Ρ„2), Π 4 (Ρ„3) ΠΈ 7,62 (Ρ„3) ΠΏΡ€ΠΈΡˆΠ»ΠΈ. ΠŸΡ€ΠΎΠ±ΠΊΠΈ 7,62 Π³ΠΎΡ‚ΠΎΠ²Ρ‹. ΠšΠ»Π°ΠΏΠ°Π½Ρ‹ Π±ΡƒΠ΄ΡƒΡ‚ Π³ΠΎΡ‚ΠΎΠ²Ρ‹ Π½Π° слСд Π½Π΅Π΄Π΅Π»Π΅.

We god rods for R3M (diam. 2), R4 (diam. 3) and .30 (diam. 3). The back plugs are ready. The valves will be ready next week.

So, as soon as I have them here, at the assembl…Read more

]]> e691a3cbe5977f48c5c04fd678d63c52 the-cad replied to the topic NEW EDGUN MODELS FOR 2016 !!!! in the forum EdGun https://talonairgun.com/forums/topic/new-edgun-models-for-2016/page/5/#post-248432 Fri, 11 Mar 2016 18:28:13 -0400 Magic indeed :8:

Nice and simple, I like simple – I associate with it quite well according to others πŸ˜‰
Open sights would be nice but not a dealbreaker for me, there’s a good selection of red dots/reflex sights out there.
Not witchcraft though, just good engineering – well done Ed, hope it’s a winner :thumb:

The Cad

]]> 17a444b1c10bf16c3b5e4237c163653d the-cad replied to the topic New name for the class of the gun. in the forum EdGun https://talonairgun.com/forums/topic/new-name-for-the-class-of-the-gun/page/2/#post-248359 Thu, 10 Mar 2016 22:33:35 -0400 quote Pippo:Dear “The Cad”,

please don’t even mention break-barrel or break-stock, we are speaking of a completely revolutionary and so far to human beings unknown design, somekind of break-through in robotics (sh*t I mentioned the word “break” myself).

(Just to avoid hurting paternity proudness and feelings)
I shall henceforth refer to it as…Read more

]]> d2f9680358a98225af867e3dfecbbadb the-cad replied to the topic New JSB .22cal 33.9gr (2.2g) in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-jsb-22cal-33-9gr-2-2g/#post-248357 Thu, 10 Mar 2016 22:24:07 -0400 quote Cricket:Wow, they are huge 😯 imagine the bc and long range capabilities if they shoot well

Think I’d be wearing steel-toe capped boots whilst loading these bad boys, wouldn’t like to drop one on my toe 😯

Magic pellets that turn sparrows into fairy dust 😈

The Cad

]]> 2458ffbee85901956faa5c3a41c4015d the-cad replied to the topic New name for the class of the gun. in the forum EdGun https://talonairgun.com/forums/topic/new-name-for-the-class-of-the-gun/page/2/#post-248354 Thu, 10 Mar 2016 22:11:42 -0400 quote shooter3:quote The Cad:I believe it de-cocks when you fold it, unfold to cock the hammer (I think)

Could be wrong, but that is my impression…. πŸ˜‰

The Cad

You cock the gun by folding it. Once folded the gun is cocked and the safety is engaged.

Thank you for the update, I stand corrected 😳

I assume there is a way of…Read more

]]> cdbf67c66283f776f67d20f8a110b889 the-cad replied to the topic New name for the class of the gun. in the forum EdGun https://talonairgun.com/forums/topic/new-name-for-the-class-of-the-gun/page/2/#post-248338 Thu, 10 Mar 2016 18:57:25 -0400 I believe it de-cocks when you fold it, unfold to cock the hammer (I think)

Could be wrong, but that is my impression…. πŸ˜‰

The Cad

]]> 35a3cb697735660ace9398c3769a8089 the-cad replied to the topic New name for the class of the gun. in the forum EdGun https://talonairgun.com/forums/topic/new-name-for-the-class-of-the-gun/#post-248327 Thu, 10 Mar 2016 17:12:25 -0400 quote Wingman NZ:FuxEd Folder :mrgreen:

Its another well designed PCP just awaiting for new master fuxer owners to fux up to the point they can claim it was a bad design that they made it better :rofl:
+1 Well said Wingman !

I await it’s launch with my own fists of ham and fingers of butter at the ready :winkn:

Seriously though, looking…Read more

]]> a18d4e272d2afb747ce4f3b5edee1881 the-cad replied to the topic New name for the class of the gun. in the forum EdGun https://talonairgun.com/forums/topic/new-name-for-the-class-of-the-gun/#post-248319 Thu, 10 Mar 2016 15:54:39 -0400 Hi Ed,

foldED sounds good, how about compactED

Hope it’s a world-beater as well as a first-class magpie/crow mauler πŸ˜‰

The Cad

]]> 10f88f92300e9448b3c2cd51d1619c7d the-cad replied to the topic New Edgun models! in the forum EdGun https://talonairgun.com/forums/topic/new-edgun-models/page/3/#post-247614 Thu, 03 Mar 2016 22:02:08 -0400 Is it just to match the smile at the other end of the Lelya πŸ˜‰ πŸ˜‰

Ask Ed when you see him, you never know, there could be a prize involved – like one of those ‘what’s wrong in this picture’ competitions πŸ˜€

I’m not a greedy man, I’ll split 50/50 :winkn:

]]> 06d0b49ac18ada4dcc882ef8d647a20b the-cad replied to the topic New Edgun models! in the forum EdGun https://talonairgun.com/forums/topic/new-edgun-models/page/2/#post-247606 Thu, 03 Mar 2016 19:27:41 -0400 Check the smiley face on the end of the moderator !

http://edgun.com/forum/uploads/monthly_03_2016/post-3-0-72062400-1457023296_thumb.jpg

Class !

]]> d0843fde74f66c6f152f96efda2bc944 the-cad replied to the topic Information you NEED to know, but won't like!!!!! in the forum BullPup General Chat https://talonairgun.com/forums/topic/information-you-need-to-know-but-won-t-like/#post-239800 Fri, 20 Nov 2015 23:16:12 -0400 :rofl: :rofl:

‘Cinderella’ brought a tear to my eye πŸ˜‰

Keep ’em coming Hoot:

The Cad

]]> 3651576ee7cd5129adfeb2cc437d864c the-cad replied to the topic EDGUN Lelya OFFSET MODERATOR alignment issue in the forum EdGun https://talonairgun.com/forums/topic/edgun-lelya-offset-moderator-alignment-issue/page/2/#post-239019 Mon, 09 Nov 2015 18:21:07 -0400 quote sniperlabyo:got the fix to make it easier to aligned the mod, I use a split bushing on the torque nut. so the mod is center with the nut while being torque, now only adjustment is the through hole at 6 o’clock, took one adjustment to get the pellet flying straight and grouping—–> no clipping.

bushing is from a pellet tin that is .35mm if…Read more

]]> e92637a8330e6090e2d46debf9082641 the-cad replied to the topic Is the EDgun possible to hand-pump from empty in the forum EdGun https://talonairgun.com/forums/topic/is-the-edgun-possible-to-hand-pump-from-empty/#post-235003 Tue, 01 Sep 2015 16:21:06 -0400 …and to save some needless sweat, don’t forget to cock the hammer back before you start pumping ! The hammer will keep the valve open otherwise πŸ˜‰

We’ve all done it πŸ™„

The Cad

]]> 137e4fdcb1475806de160c67c5afaedf the-cad replied to the topic Aluminum magazines for the 25 cal R3M (???) in the forum EdGun https://talonairgun.com/forums/topic/aluminum-magazines-for-the-25-cal-r3m/#post-234304 Wed, 19 Aug 2015 20:10:15 -0400 I have a .25 R3M myself which I got just over a year ago, this came with the two magazines in aluminium also. I have not had an accuracy problem with using either of the mags, the only weak link with accuracy being the fleshy bit behind the trigger πŸ™„

I know that the R3M requires a good, smart, action to cycle the mag fully – It’s not a…Read more

]]> c8028b545da422f9fec29126c977d25d the-cad replied to the topic Purchased a new EDgun Matador R3M (.25) (pics) in the forum EdGun https://talonairgun.com/forums/topic/purchased-a-new-edgun-matador-r3m-25-pics/page/2/#post-234145 Mon, 17 Aug 2015 18:00:26 -0400 quote Ed:quote Pippo:Vacations instead of delivering items promised one year ago?

Ok, vacations did not work, let’s try with another one :rofl: :rofl: :rofl:

“EDFun” :rofl:

I love you too! πŸ™‚

Now that response made me really laugh :rofl: :rofl: :rofl: :rofl:

Hope it was a good holiday Ed πŸ˜€

The Cad

]]> e33a71ad19a09376d12ea6f5bb0c56da the-cad replied to the topic Purchased a new EDgun Matador R3M (.25) (pics) in the forum EdGun https://talonairgun.com/forums/topic/purchased-a-new-edgun-matador-r3m-25-pics/#post-232720 Wed, 29 Jul 2015 15:55:18 -0400 That indeed is a nice stock :8:

Had a Standard .25 R3M for around a year myself and all i’ve done is tweaked the HST down to 900 fps with the 25 grain JSB Kings and it is a constant source of displeasure amongst the local crow and magpie population πŸ˜‰

I can take a 90 yarder without breaking into a sweat with this and be absolutely…Read more

]]> 4442aed0a9441175e8187aa317ba094a the-cad replied to the topic Lelya Gear (what cha got! ) in the forum EdGun https://talonairgun.com/forums/topic/lelya-gear-what-cha-got/#post-227136 Fri, 22 May 2015 15:17:47 -0400 quote Wingman NZ:Jealous much? :biggrinn:

Nope, the green eyed one isn’t here either :mrgreen:

The Cad

]]> 34d01ef931410a2fac235f7b13afbcba the-cad replied to the topic accuracy problem Edgun Matador R3M 25 in the forum EdGun https://talonairgun.com/forums/topic/accuracy-problem-edgun-matador-r3m-25/page/3/#post-227135 Fri, 22 May 2015 15:05:19 -0400 Thats exactly what I was looking for, thank you very much Keyser πŸ˜€

Squirrels absolutly hate the .25, it’s absolutely devasating on them even with JSB Kings rather than JSB Predators (I can’t get groups acceptable enough past 50 yds in mine with the Predators).
The squirrels may hate me even more when the .30 turns up…. 😈

Thanks…Read more

]]> c8a845c427150b22d6dec7fe238d7b6c the-cad replied to the topic accuracy problem Edgun Matador R3M 25 in the forum EdGun https://talonairgun.com/forums/topic/accuracy-problem-edgun-matador-r3m-25/page/3/#post-227080 Thu, 21 May 2015 21:45:47 -0400 quote keyser soze:my tune involves taking the regulator to 125 psi A full cleaning of the regulator and a light application of new grease. Then a full cleaning of all the other little parts The next step I do is a adjust the HST to the point where the gun has no more than an ES of 4 feet per second. On the above gun prints an extreme spread of…Read more

]]> 7aa5652ca630e573c03f91c4d165da56 the-cad replied to the topic Silent but Deadly Cricket thanks to Neil Clague! in the forum BullPup General Chat https://talonairgun.com/forums/topic/silent-but-deadly-cricket-thanks-to-neil-clague/page/2/#post-226189 Fri, 08 May 2015 21:20:33 -0400 Hi Mike,

The Neil Clague shroud I got has grub screws that tighten onto the barrel to keep it in place, it doesn’t ‘screw on’ to the barrel the same as the OE moderator/shroud.
Personally I prefer the ‘screw on’ method of attachment, but hey that’s me :whistle:

Hope that helps !

The Cad

]]> df55cefe60c19a332759f0e699cac16b the-cad replied to the topic EdGun .30 in the forum EdGun https://talonairgun.com/forums/topic/edgun-30/page/2/#post-226112 Thu, 07 May 2015 16:53:56 -0400 Are Bobcat customers aware of this new attire to complement their purchase ?

:whistle:

The Cad

]]> 343f93d181d653edb24756f0aec96b6d the-cad replied to the topic Lelya Shipment Update? in the forum EdGun https://talonairgun.com/forums/topic/lelya-shipment-update/page/13/#post-224860 Mon, 20 Apr 2015 23:43:50 -0400 I can hear those chicken heads popping from here already 😯

Well done that man, what’s the flavour of the ‘chicken slayer’ Hoot: ?
.22 or the mini bazooka.25 :8:

Enjoy that temptress 😈

The Cad

]]> 1ca94c0e44082fc848291eec49775271 the-cad replied to the topic Fao of ed regarding beech stocks on edguns in the forum EdGun https://talonairgun.com/forums/topic/fao-of-ed-regarding-beech-stocks-on-edguns/#post-224762 Sun, 19 Apr 2015 18:59:56 -0400 quote Ice:I thought the majority of Edguns were Beech stocks I haven’t seen many walnut stocks πŸ˜€
I can only comment on my EDguns obviously, but they all have walnut stocks :2cents:

I do order from Ed direct and have always got what I paid for, just as it should be really.
I can’t comment on any importers as I haven’t used any, I do prefer…Read more

]]> a827d37a5f5f314a3149598fff5d77e3 the-cad replied to the topic EDgun hunting crows Russia in the forum EdGun https://talonairgun.com/forums/topic/edgun-hunting-crows-russia/#post-223390 Thu, 02 Apr 2015 17:29:16 -0400 …and a Mexican stand-off with 1/2 ton of prime beef in the first one 😯

He didn’t want to moo-ve did he πŸ™„

Sorry, had to do it !

The Cad

]]> 71f583cb943cd53d07b0c27e6f159047 the-cad replied to the topic Real Russian winter hunting with EDgun in the forum EdGun https://talonairgun.com/forums/topic/real-russian-winter-hunting-with-edgun/page/2/#post-217763 Thu, 22 Jan 2015 23:29:36 -0400 Fantastic videos Ed, I enjoyed the ‘drivebys’ on those magpies :mrgreen:

I always take the opportunity to take those wiley monochrome bandits out myself, usually with the R3M in .25 flavour :5:

That’s a really good hunting ground that you have there Ed, and best of all no mosquitoes in Winter !

The Cad

]]> 11712f620809f81b780c5aed0943f2a0 the-cad replied to the topic .30cal big bore PCP build in the forum Other BullPups https://talonairgun.com/forums/topic/30cal-big-bore-pcp-build/page/4/#post-210339 Mon, 08 Sep 2014 22:15:03 -0400 You just have to love that serial number :8:

Loving your work Wingman, that is an absolute cannon !

The Cad

]]> 556df975a5272ac5c62f47b29f79bdf9 the-cad replied to the topic Anyone shot your R3m's/ R30's out past 50 lets see groups!! in the forum EdGun https://talonairgun.com/forums/topic/anyone-shot-your-r3m-s-r30-s-out-past-50-lets-see-groups/page/5/#post-209728 Thu, 28 Aug 2014 21:36:15 -0400 quote SECoda:Hmmm. You have a vertical string. πŸ˜‰ I wonder why? I never posted because they only wanted longer range groups.
Maybe a sticky o ring in the reg causing velocity inconsistencies ?
Could explain the vertical shift, have you put it over the chrony recently ?
I used to get this with my .22 R3 standard when I had left it ‘unloved’…Read more

]]> d215f9b74cbd0bff42adf61a9f6e6cb0 the-cad replied to the topic Help Me Find My Air Reservoir Leak in the forum EdGun https://talonairgun.com/forums/topic/help-me-find-my-air-reservoir-leak/#post-209725 Thu, 28 Aug 2014 21:18:53 -0400 quote RomeoAlfa:Replacing this o-ring seems to have taken care of my leak, it has been holding air all week so far.
Good to hear it’s all sorted, I’ve nicked one of these o rings myself when putting the reg back in the air tube – I learnt the hard way with that :whistle:

The Cad

]]>