Talonairgun | the-roc | Activity https://talonairgunforum.com/members/the-roc/activity/ Activity feed for the-roc. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 bfb564a958a1e206932c76a47947eeaa the-roc replied to the topic Getting a Talon into Canada? in the forum General Chat https://talonairgun.com/forums/topic/getting-a-talon-into-canada/#post-187756 Fri, 20 Dec 2013 11:52:04 -0400 FYI. I’m from Canada. As long as we have PAL for high powered air rifles shipping one is not a problem. The problem is the baffles in the shroud which is not permitted.

Having said that Canada can now sell the Marauder as long as the baffles are not included in the shroud and something is placed inside the shroud by Crosman to prevent any…Read more

]]> 33e0be686326bb77330d166032e736b8 the-roc replied to the topic 220 yards with .25 cricket?? in the forum Kalibrgun https://talonairgun.com/forums/topic/220-yards-with-25-cricket/#post-186941 Sun, 15 Dec 2013 23:23:50 -0400 quote ironcross6921:CHALLENGE ACCEPTED!!

x2

Shooting out to 100 yards with my AA S510 Carbine FAC in 22cal was not a problem for me his past summer, shooting out to that distance through the viewfinder of my camera while filming my shots… that’s a different story :

I just ordered a new Synthetic Stock 25cal Marauder and I’ll be giving it the…Read more

]]> 32afe390593f6e9b01adba085a14ea1f the-roc replied to the topic Info on mounting a Pulsar N550 to an air rifle in the forum Optics/Nightvision https://talonairgun.com/forums/topic/info-on-mounting-a-pulsar-n550-to-an-air-rifle/#post-175121 Fri, 05 Jul 2013 07:23:25 -0400 So they do need a dove tail to weaver adapter… Ok, thanks for the info.

]]> 71a90822e6483d0e23bb2b62bf4c3bcc the-roc replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/page/2/#post-174530 Sun, 23 Jun 2013 03:46:14 -0400

]]> f54d2e9fae7e77514043e9bb91372a5d the-roc replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/#post-168361 Wed, 06 Mar 2013 12:29:14 -0400 quote camilof:today i make an order by amazon, but i`m hesitate between the carbina or rifle.

I have both the full size S410 and the carbine S510.

If I’m just shooting off a table then the full length is not a problem.

Too carry it around and easy manageability the carbine is light and the perfect size and weight.

]]> b0c3bed4e216d38d0fe280c8b8297c1f the-roc replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/#post-168360 Wed, 06 Mar 2013 12:26:06 -0400

]]> 98b622f43b47c2cadce3d8bf0d8c1e2d the-roc replied to the topic Pass through hole size in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/pass-through-hole-size/#post-158744 Mon, 06 Aug 2012 14:21:52 -0400 I’m just a messenger…

]]> 34a7dbd87410a00c17bb938c50ebb355 the-roc replied to the topic Pass through hole size in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/pass-through-hole-size/#post-158692 Sat, 04 Aug 2012 13:11:26 -0400 Maybe somewhere here or another forum can answer your .25cal question. Maybe even someone who owns a S510 in .25cal.

]]> b7b7ababdf28571c40ff27980bbfeb83 the-roc replied to the topic Pass through hole size in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/pass-through-hole-size/#post-158690 Sat, 04 Aug 2012 12:13:06 -0400 The shrouded barrel of my .22cal S410 and S510 is 0.345″

]]> 0144c33ddf41487c54f61a4afdee6a51 the-roc replied to the topic What's Up with JSB??? in the forum General Chat https://talonairgun.com/forums/topic/what-s-up-with-jsb/#post-158364 Sat, 21 Jul 2012 11:55:33 -0400 I just bought 5 tins of the new red and black color lid but I’m in Canada

]]> e6f6027ad6b31be86e00cc7e0fd63bf1 the-roc replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/#post-158217 Sat, 14 Jul 2012 02:17:53 -0400 Took her apart for a good cleaning, de-burred the power knob air port, replace a crushed washer and polished the hammer guide rod and valve stem. Re-Chronied but added a muzzle break for a more accurate reading. Muzzle placed 18″ in front of Chrony.

]]> 037224ed665a62d4f3103a182b6c62b8 the-roc replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/#post-158018 Sun, 08 Jul 2012 00:00:30 -0400 Here’s where I bought mine

http://www.trail-marker.com/store/index.php?product=AA-S510C22SX30RWH&c=77

]]> 636acf3d0e22dccf20014136f4e3b527 the-roc replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/#post-158017 Sat, 07 Jul 2012 23:51:47 -0400 quote roachcreek:And that distance from the chrony could be your problem, if you do in fact even have one ROK. Huh??? What do you mean???

quote roachcreek:And that distance from the chrony could be your problem, if you do in fact even have one ROK. Try it at 20 feet and then correct for the muzzle.

Honestly, they are known for being anemic…Read more

]]> bf5ebf206ce35349217f5188e35d0ffe the-roc replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/#post-158014 Sat, 07 Jul 2012 23:32:59 -0400 quote roachcreek:Roc,

I would either keep the AA 410 or get rid of my chrony if I were you.

I have never heard of a carbine 410 shooting that fast. Mine was close for a while until I discovered my chrony was reading high.

Regards,

Roachcreek

Nope… not my chrony, it’s the same chrony I use to test my 9mm rounds for IPSC. My power factor…Read more

]]> a18b189c4a9940be008fa62ec2ab8ec4 the-roc replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/#post-158009 Sat, 07 Jul 2012 20:42:47 -0400 quote Hoot:Where did you find that dovetail mount level?

H 😯 😯 T

I bought it from Specialty shooting Sports Outdoor. It was listed as a Hawke Bubble Level for 9 – 11mm dove tail.

]]> 495ca290c713dcc2a270b3df4419cc47 the-roc replied to the topic AA S4XX/5XX Air Cylinder Removel... in the forum Other Guns https://talonairgun.com/forums/topic/aa-s4xx-5xx-air-cylinder-removel/#post-157482 Thu, 21 Jun 2012 15:59:18 -0400 What I did when the cylinder was to tight to remove with the methods mentioned above was clamp the cylinder tube into the vice but be sure to have pieces of wood to prevent damage to the cylinder itself and grasp the other end with the leather belt and unscrew. It’ll be easier because the leather belt wrapped around something with four corners…Read more

]]> 9b6b9edccf398ac9ef67590c5bc5accc the-roc replied to the topic S510 Shroud Removal! Mods: "Reference Section"??? in the forum Other Guns https://talonairgun.com/forums/topic/s510-shroud-removal-mods-quot-reference-section-quot/#post-150450 Wed, 15 Feb 2012 21:23:58 -0400 quote Hoot:Does this thing unscrew from the breech?

It must have a glue on the threads. If so, how have some of you gotten past that barrier? Will a hair dryer do it, or is a torch necessary?

A little help please.

H 😯 😯 T

If you had only paid more attention to my post and less on my avatar you would have known the answer to…Read more

]]> 21bd26f440c874e3af97ef8161998133 the-roc replied to the topic AA S410/S510 .22 caliber Regulator??? in the forum Other Guns https://talonairgun.com/forums/topic/aa-s410-s510-22-caliber-regulator/page/2/#post-149966 Tue, 07 Feb 2012 10:02:34 -0400 ^^^

Patiently waiting for your results.

Cheers

]]> b2096b30ebcf0300f1e543b005cc4bce the-roc replied to the topic AA S410/S510 .22 caliber Regulator??? in the forum Other Guns https://talonairgun.com/forums/topic/aa-s410-s510-22-caliber-regulator/#post-149909 Mon, 06 Feb 2012 00:15:45 -0400 quote Hoot:Who makes a good regulator for a .22 caliber AA S510?

Is it worth the effort?

Curious whether my S510 would still get 30 FPE, or close, and increase shot count.

Interested in comments.

H 😯 😯 T

I have an audrius reg installed in my S410 Xtra FAC .22cal, go into my profile and search my old posts on it you’ll love the…Read more

]]> 2b1d835b4ac2a3ae0f5b8b016ccd22a6 the-roc replied to the topic Anyone have a shot string for a FX Royal in .22cal??? in the forum Other Guns https://talonairgun.com/forums/topic/anyone-have-a-shot-string-for-a-fx-royal-in-22cal/#post-149854 Sat, 04 Feb 2012 13:29:48 -0400 I am now leaning more towards the Rapid MKII .25cal 50ft/lb version.

So much info that I’ve read and the Rapid seems to be the one to go for.

I could go for the AR 80ft/lb but moderators are not legal in Canada

Cheers

]]> 7f352852e01a0a5311288475d644e1f2 the-roc replied to the topic Anyone have a shot string for a FX Royal in .22cal??? in the forum Other Guns https://talonairgun.com/forums/topic/anyone-have-a-shot-string-for-a-fx-royal-in-22cal/#post-149428 Fri, 27 Jan 2012 21:55:58 -0400 Thanks RC,

Exactly what I was looking for, the bell curve. Those number are good, fairly flat for a non reg.

FYI, I’m thinking .22 Royal, Air Ranger 60ftlb .22 cal or the Rapid .25 cal 50ftlb

]]> ac2aba6bc9d165bf69a3c07df9b9c524 the-roc replied to the topic Anyone have a shot string for a FX Royal in .22cal??? in the forum Other Guns https://talonairgun.com/forums/topic/anyone-have-a-shot-string-for-a-fx-royal-in-22cal/#post-149425 Fri, 27 Jan 2012 21:34:17 -0400 Thanks but already read that thread and the others but none have actual shot stings just hi low ave es and sd. Hoping for a actual string(s)

Cheers

]]> e0dd0cfdfd4bf9ee7b653eedbfabbf48 the-roc replied to the topic .22 Marauder takes on RATS!!!! in the forum Other Guns https://talonairgun.com/forums/topic/22-marauder-takes-on-rats/#post-120162 Thu, 07 Oct 2010 11:22:49 -0400 Nice Work!!! A good rat is a dead rat!

I bagged one a couple of weeks ago in the afternoon in my backyard. It had its back to me so I nailed him in the back of the head with my AA S410 Xtra .22cal. I know there are more living under my garden shed.

]]> ce13d33480e08c7607efa2f80bd7b631 the-roc replied to the topic Air Arms 410SL / 510 Regulator Installation in the forum Other Guns https://talonairgun.com/forums/topic/air-arms-410sl-510-regulator-installation/page/3/#post-119901 Sun, 03 Oct 2010 04:45:07 -0400 quote TerrySS:It’s been 3 months or so since you guys installed the regulators.. How are things now? Are the numbers holding up, or are they fluctuating? Did you drill the relief hole in your air tube? Any problems with the drilling? If you wanted to go back to stock setup, how would you patch the relief hole?
Thanks, Terry

It’s that time of the…Read more

]]> 5e62e8ff676c8989f55390af6ed4a8b3 the-roc replied to the topic Edgun silenced in the forum EdGun https://talonairgun.com/forums/topic/edgun-silenced/#post-107817 Thu, 13 May 2010 15:07:34 -0400 quote Bonestock:I hope there’s not a school yard full of kids close by. lol Dude is just blasting rounds up in the air with no regard.

X2

What a complete A$$ F***.

Ooooh I feel like making a rude and ****** remark right now 😡 and I don’t give a rats a$$ who’s on this forum and from where! Sh8t like that on youtube makes us ALL look bad!…Read more

]]> 648732c8271f37262bd0561e042158c5 the-roc replied to the topic Air Arms 410SL / 510 Regulator Installation in the forum Other Guns https://talonairgun.com/forums/topic/air-arms-410sl-510-regulator-installation/page/2/#post-107729 Wed, 12 May 2010 11:53:52 -0400 quote mamcrackin:I have pushed my tube guns to 3,400psi

Was it a S410 Xtra FAC and on a regular basis or was it just “lets give it a try” for a few time but back to 200 – 210 BAR?

Just curious….

]]> 7794d26e61e9913af78a46b231b8d530 the-roc replied to the topic Air Arms 410SL / 510 Regulator Installation in the forum Other Guns https://talonairgun.com/forums/topic/air-arms-410sl-510-regulator-installation/page/2/#post-107727 Wed, 12 May 2010 11:31:35 -0400 I know this is off topic but it was brought up… I’m having the same discussion over at the AA forum becuase it was mentioned here and yes the FAC tube have been tested to 300 BAR at the factory but the SWP of the cylinder says 200. I’ve read that there are air cylinder that have the SWP rating of 300BAR but the S410 is only 200.

BUT does that…Read more

]]> 9a13c1f9d19fb693023463bf46b04cfb the-roc replied to the topic Air Arms 410SL / 510 Regulator Installation in the forum Other Guns https://talonairgun.com/forums/topic/air-arms-410sl-510-regulator-installation/page/2/#post-107664 Tue, 11 May 2010 19:54:39 -0400 quote Cygnus X:dont forget with the reg installed you can fill to 220-250 bar

No disrespect but 210 BAR I’ve read BUT 220 – 250 BAR on a S410 cylinder???

]]> ee388f7abeaf83a1a82b984ef9c48b9c the-roc replied to the topic Air Arms 410SL / 510 Regulator Installation in the forum Other Guns https://talonairgun.com/forums/topic/air-arms-410sl-510-regulator-installation/#post-107637 Tue, 11 May 2010 11:15:21 -0400 Very nice YN…. Have you cut the Hammer Spring yet? Warning… take alittle at a time. I removed about a coil and a 1/4.

With the HS at full length and pretention you are wasting air. But it depends on what you want 20 – 30 shots at full power and consistant or 40 + shots at a slightly reduced power and consistant.

Did you read my posts here:…Read more

]]> 16669e22f8e5fca0e5ee09a38482e9f3 the-roc replied to the topic Audriusize Reg for AA S410... which way to turn knob to.... in the forum Other Guns https://talonairgun.com/forums/topic/audriusize-reg-for-aa-s410-which-way-to-turn-knob-to/page/2/#post-106547 Thu, 29 Apr 2010 01:29:42 -0400 It’s killing me not to do it but I’m soooooo tempted to take the reg apart now that I’ve seen his vid.

]]> d30ab2d8ea3626ad42916ca7c5f280c0 the-roc replied to the topic Audriusize Reg for AA S410... which way to turn knob to.... in the forum Other Guns https://talonairgun.com/forums/topic/audriusize-reg-for-aa-s410-which-way-to-turn-knob-to/#post-106546 Thu, 29 Apr 2010 01:27:12 -0400 quote Voltar_1:quote The ROC:Yup… the hole on the other side is thread so that should help me remove it from the air cylinder withh the long bolt.

What you want to have is a wire or string to pull the reg out the front of the air tube. That way you can make adjustments with out stripping the rifle down.

DUH!!!! 😳 gotcha…

Just…Read more

]]> c455175f538829382471711847a6d0ac the-roc replied to the topic Audriusize Reg for AA S410... which way to turn knob to.... in the forum Other Guns https://talonairgun.com/forums/topic/audriusize-reg-for-aa-s410-which-way-to-turn-knob-to/#post-106538 Thu, 29 Apr 2010 01:06:41 -0400 Yup… the hole on the other side is thread so that should help me remove it from the air cylinder withh the long bolt.

]]> 67956174961c1d036f37eb3d2ef2a069 the-roc replied to the topic Audriusize Reg for AA S410... which way to turn knob to.... in the forum Other Guns https://talonairgun.com/forums/topic/audriusize-reg-for-aa-s410-which-way-to-turn-knob-to/#post-106498 Wed, 28 Apr 2010 17:52:51 -0400 quote Voltar_1:Now you need to make a tool to pull that reg out. tie a wire to it so you can pull it outwithout tearing the rifle down each adjustment.

Clean off the loctite and use teflon tape instead. Will allow you to adjust without fear of losing the setting.

Did not take picture but the other side is a hole that is threaded, looks that…Read more

]]> 092be5a1308f3194c9d74891597bd3a3 the-roc replied to the topic Audriusize Reg for AA S410... which way to turn knob to.... in the forum Other Guns https://talonairgun.com/forums/topic/audriusize-reg-for-aa-s410-which-way-to-turn-knob-to/#post-106491 Wed, 28 Apr 2010 16:55:36 -0400 quote Voltar_1:quote The ROC:Thanks Walter,

As you can see in the pic he has it maked with a notch in the knob and two dots on the body itself.

yes , thanks I see that. So when you adjust make full turns and see what you get.
Do you have a way of measuring the output pressure? does you gun have a pressure gauge?

Walter….

Yes the S410 has a…Read more

]]> 668bc28289ca2209a6ad1be8d7c0c4c0 the-roc replied to the topic Audriusize Reg for AA S410... which way to turn knob to.... in the forum Other Guns https://talonairgun.com/forums/topic/audriusize-reg-for-aa-s410-which-way-to-turn-knob-to/#post-106490 Wed, 28 Apr 2010 16:54:33 -0400 Just got a reply e-mail from Vincent…

Turn knob 5 minutes Counter-Clockwise to increase BAR by 10 and Clockwise 5 minutes to reduce by 10BAR.

He also warned that the threads have a bit of loc-tite so I need to be very careful when I adjust it.

]]> 56a7715a96b6b33f3d43798abd9930cc the-roc replied to the topic Audriusize Reg for AA S410... which way to turn knob to.... in the forum Other Guns https://talonairgun.com/forums/topic/audriusize-reg-for-aa-s410-which-way-to-turn-knob-to/#post-106486 Wed, 28 Apr 2010 16:46:27 -0400 Thanks Walter,

As you can see in the pic he has it maked with a notch in the knob and two dots on the body itself.

]]> aa5e8b4335aee6b0d22caa01b002d275 the-roc replied to the topic Proposed regulator for AA S410 in the forum Mods/Machinists https://talonairgun.com/forums/topic/proposed-regulator-for-aa-s410/#post-105974 Sat, 24 Apr 2010 05:05:17 -0400 quote rob3dr:I did drill the vent hole, yes…. I had questioned that myself and had a few folks to tell me it wasnt needed… and Walt had mentioned I should do it… I am not a newbie by no means, but I know who I should listen to and so I drilled the vent. Had a sealing issue that was fixed with a little deburring and a little more attention…Read more

]]> 0d3481e334a6df443f9e163a9ea8efaf the-roc replied to the topic Proposed regulator for AA S410 in the forum Mods/Machinists https://talonairgun.com/forums/topic/proposed-regulator-for-aa-s410/#post-105966 Sat, 24 Apr 2010 04:29:52 -0400 quote Voltar_1:quote The ROC:quote rob3dr:Was wondering what would come of it. I got my regs direct from Audryus for 65 Euro or so… Quite inexpensive, I think.

I put one in an AAS400 MPR FT and it’s giving me 115 shots at 13fpe… very consistent. That at a 100 bar output. The other is 120 bar output and is going to go on my S400Carbine with…Read more

]]> 9a541bc557383c5c1fcdc5b79686c758 the-roc replied to the topic Proposed regulator for AA S410 in the forum Mods/Machinists https://talonairgun.com/forums/topic/proposed-regulator-for-aa-s410/#post-105964 Sat, 24 Apr 2010 03:58:10 -0400 quote rob3dr:Was wondering what would come of it. I got my regs direct from Audryus for 65 Euro or so… Quite inexpensive, I think.

I put one in an AAS400 MPR FT and it’s giving me 115 shots at 13fpe… very consistent. That at a 100 bar output. The other is 120 bar output and is going to go on my S400Carbine with Classic tube… havent…Read more

]]> a1dabb62cc05a6966b26a656cb6cefea the-roc replied to the topic Proposed regulator for AA S410 in the forum Mods/Machinists https://talonairgun.com/forums/topic/proposed-regulator-for-aa-s410/#post-105928 Fri, 23 Apr 2010 23:19:28 -0400 x2 ^^^^^^

I just ordered my reg for my S410 Xtra FAC and had them preset to 140BAR which will give you the 30ft/lb +/- a few. Yet still adjustable for fine tuning.

Should be getting it soon… but not soon enough 🙁

It started here: http://www.network54.com/Forum/79537/thread/1268696358/youtube+link+to+see+the+marauder+regulator+in+action

I…Read more

]]> 9f640e7ec5ab97f3de9ca692927f1d4f the-roc replied to the topic Question about using a HPA paintball tank to top up? in the forum General Chat https://talonairgun.com/forums/topic/question-about-using-a-hpa-paintball-tank-to-top-up/#post-105039 Sat, 17 Apr 2010 16:49:21 -0400 My Thread so I can hijack myself…

Please… A Little Less Conversation and More…….http://www.youtube.com/watch?v=N7UE0YlgP3w&feature=related

]]> 58f31b00e5ec9eac0f50245f493a7ec2 the-roc replied to the topic Question about using a HPA paintball tank to top up? in the forum General Chat https://talonairgun.com/forums/topic/question-about-using-a-hpa-paintball-tank-to-top-up/#post-105035 Sat, 17 Apr 2010 16:42:37 -0400 quote Mr-lama:quote The ROC:quote Mr-lama:ROC!!!!

Where ya been?

I’ve missed you. Well, your avatar. But you aren’t bad either. 😆

You’re such a PERV! 😆 😆

Less talky more bouncy…

OH OH!!!! I know your favorite song!

A Little Less Conversation 😆 😆

]]> 6cf328c5b61eeb6dc9083638363ddab2 the-roc replied to the topic Question about using a HPA paintball tank to top up? in the forum General Chat https://talonairgun.com/forums/topic/question-about-using-a-hpa-paintball-tank-to-top-up/#post-105033 Sat, 17 Apr 2010 16:38:47 -0400 quote Mr-lama:ROC!!!!

Where ya been?

I’ve missed you. Well, your avatar. But you aren’t bad either. 😆

You’re such a PERV! 😆 😆

]]> bb6f3ea4c42afdaaeb003878652138ff the-roc replied to the topic Question about using a HPA paintball tank to top up? in the forum General Chat https://talonairgun.com/forums/topic/question-about-using-a-hpa-paintball-tank-to-top-up/#post-105018 Sat, 17 Apr 2010 14:12:08 -0400 Ok, sounds good to me.

]]> 9c87406f2595a2151672e813e132725f the-roc replied to the topic Question about using a HPA paintball tank to top up? in the forum General Chat https://talonairgun.com/forums/topic/question-about-using-a-hpa-paintball-tank-to-top-up/#post-105015 Sat, 17 Apr 2010 14:03:45 -0400 quote WalkonKing:If the max output of the reg is 850 psi. You will never be able to fill past 850 psi from that tank to your gun.

That’s what I thought… so can and is it safe to mod the reg so the psi is higher or just making it a valve? Similar to a co2 tank valve?

As can read my knowledge on regs is very limited.

I know I can simpley buy a…Read more

]]> bb0deeed274a68aab8a4f994a717aa6e the-roc replied to the topic Question about using a HPA paintball tank to top up? in the forum General Chat https://talonairgun.com/forums/topic/question-about-using-a-hpa-paintball-tank-to-top-up/#post-105013 Sat, 17 Apr 2010 13:54:53 -0400 quote WalkonKing:The tank your buddy has probably has the regulator preset to 450 or 850 psi.

Correct but I’m not shooting from it, just want to use it as a portable fill station and I’m not sure if that reg will prevent me from fill to 2800 psi.

]]> ab8b760388ac0f471b85aa8cdda50d1d the-roc replied to the topic Question for Air Wolf MCT owners - shot count on MED POWER? in the forum Other Guns https://talonairgun.com/forums/topic/question-for-air-wolf-mct-owners-shot-count-on-med-power/#post-104119 Thu, 08 Apr 2010 14:54:07 -0400 quote BirdHunter:Fwew, thank goodness knifemaker and that other site stepped up to definitively answer all your questions (including shot string) – saved me some 180 pellets. Since you got your answer already, I’ll just casually shoot tomorrow (instead of chronying and reporting hard numbers)…..

Thanks and yes I was looking at shot count…Read more

]]> c613d4d1843cfd9f103cec38ab916e7d the-roc replied to the topic Question for Air Wolf MCT owners - shot count on MED POWER? in the forum Other Guns https://talonairgun.com/forums/topic/question-for-air-wolf-mct-owners-shot-count-on-med-power/#post-104103 Thu, 08 Apr 2010 07:47:25 -0400 I found this at another sire: “low power as I recall high 872 low 865 with 18gr 164 shots that day. High power gave high 976 to low of 967 with 18gr 113 shots”

I still like it! 😀

quote BirdHunter.:I really havent seen much different in shot counts between hi and low I might get a chance after work tomorrow to get you some numbers.

That’ll…Read more

]]> d80bfaf50619faff3b3a4e8405ca7ead the-roc replied to the topic Question for Air Wolf MCT owners - shot count on MED POWER? in the forum Other Guns https://talonairgun.com/forums/topic/question-for-air-wolf-mct-owners-shot-count-on-med-power/#post-103983 Wed, 07 Apr 2010 00:53:37 -0400 oops, MCT.

]]> 564761567d8f61c06a7a47eee79fe4de the-roc replied to the topic What is the DotSep (@10x) for a Leapers 8-32x scope in the forum Optics/Nightvision https://talonairgun.com/forums/topic/what-is-the-dotsep-10x-for-a-leapers-8-32x-scope/#post-103300 Sun, 28 Mar 2010 17:46:03 -0400 quote mamcrackin:The ROC, I just shot mine @ 50yds on 10X mag… Leapers 8-32X56mm… I
got a 2.25″ difference with 1 mildot and the calculations say the seperation
should be 4.298

Bang on!

I got the same number but my range was 10x @ 25 yrd = 1.125″ giving me a DotSep of 4.298

Thanks again!

]]>