Talonairgun | the-sloth | Activity https://talonairgunforum.com/members/the-sloth/activity/ Activity feed for the-sloth. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 23f60e64640df1ff071a0de3c0e90b4a the-sloth replied to the topic How to replace oring between TP and Brass Ring? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/how-to-replace-oring-between-tp-and-brass-ring/#post-257771 Tue, 23 Aug 2016 02:21:56 -0400 I think the easiest way is probably to just remove the barrel. Loosen the set screw on the top of the breech and the eight screws on the rail towers. Barrel should pull out – slide it out enough so that you can stick the o-ring to the end of the barrel and then slide the barrel back in. A little bit of silicone grease will help the o-ring stick.

]]> afd93c794887313cefa4833794a4f889 the-sloth replied to the topic What's the final weight of your Shorty setup weighing in at? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/what-s-the-final-weight-of-your-shorty-setup-weighing-in-at/#post-257121 Fri, 05 Aug 2016 02:48:07 -0400 Mine weighing in at 8 lb. 3 oz. as shown, 8 lbs. 1 oz. without the additional ldc.

]]> ea1c03a24e35440d1472844a6c53b198 the-sloth replied to the topic LDCs for Matador .25? in the forum EdGun https://talonairgun.com/forums/topic/ldcs-for-matador-25/#post-256781 Tue, 26 Jul 2016 13:47:16 -0400 Donny stepping up his game! Looks great man!

]]> 7c4eeb6fb9d4436dbeae4f46e481776e the-sloth replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/page/2/#post-256687 Sun, 24 Jul 2016 00:53:03 -0400 Kabuki, it’s an Athlon Talos BTR 4-14 FFP. Yeah, it’s quiet enough without the LDC… but a little overkill is always fun :biggrinn: I live in suburbia with neighbors very close on one side. The quieter the better.

]]> 4a29780c724a269eb630801d0377c975 the-sloth replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/page/2/#post-256667 Sat, 23 Jul 2016 16:04:03 -0400 830 with 16 gr JSB’s.

After Mutant, my guns from most to least quiet: .22 Prod w/TKO LDC (12 FPE), .22 Cricket carbine (32 FPE), .177 Mrod (18 FPE), .25 R3M w/Donny LDC (45 FPE). Of course that is by ear and completely unscientific. The shot sound of the Mutant with the extra LDC on the end is just the crisp CLICK from the action. Prod and Mrod…Read more

]]> 1a31c697828fb49dbf27fbcf4aa5f028 the-sloth replied to the topic Mutant Shorty Need Any Extra Sound Supression... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-need-any-extra-sound-supression/page/2/#post-256661 Sat, 23 Jul 2016 14:59:11 -0400 Using the 6″ Donny LDC from my .25 R3M on the shorty. Quietest gun I own now!

]]> dd6fd4f2cafcfb4d18350ab654be3d11 the-sloth replied to the topic Cricket 25cal. Carbine rifle muzzle thread size in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-25cal-carbine-rifle-muzzle-thread-size/#post-254980 Tue, 14 Jun 2016 17:35:49 -0400 I have a .22 carbine and the barrel’s not threaded – the moderator is a slip on and secured with a grub screw. Not sure about the .25 barrel, but wouldn’t be surprised if it’s the same.

]]> e6e06ed9f9b38a84b6ce9b45e02360f6 the-sloth replied to the topic EDgun .25 short review video in the forum EdGun https://talonairgun.com/forums/topic/edgun-25-short-review-video/page/2/#post-254313 Fri, 03 Jun 2016 02:18:47 -0400 Keyser, is it possible to fit the upgraded breech internals into older R3M’s? And are those parts for sale, as well as the plastic mags?

]]> eb570465844ec07cfb756ea23197ce26 the-sloth replied to the topic anyone compared the accuracy of the CZub barrel to the CZrep? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/anyone-compared-the-accuracy-of-the-czub-barrel-to-the-czrep/page/2/#post-253868 Thu, 26 May 2016 17:29:22 -0400 Click the “direct” link option on photobucket, that will copy the pic url, then switch over to TAG and click the “Img” button above the text box. Paste the url between the img tags that appear. You’ll need to do this with each pic.

this:
code…Read more

]]> b2d1d82417bd2434bf6d38cfbd1187bb the-sloth replied to the topic anyone compared the accuracy of the CZub barrel to the CZrep? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/anyone-compared-the-accuracy-of-the-czub-barrel-to-the-czrep/#post-253778 Wed, 25 May 2016 01:18:47 -0400 Nope. Because I never received my CZrep from Peter. At this point I guess I’ve been totally shafted by Peter and his compadres. He asked me to send my German barrel back to him mid-April, which I did, and last contact was from Steve (old wwag owner) was that he was helping Peter and would get a replacement to me ASAP. That was beginning of May.…Read more

]]> f5ef1fae241c9ec35f0980c4486523d2 the-sloth replied to the topic Cleaning question, shroud unscrew? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/cleaning-question-shroud-unscrew/page/2/#post-253747 Tue, 24 May 2016 13:56:10 -0400 iride, what order are your baffles in?

]]> 6d7198f74b1d495480f39c0e0571826f the-sloth replied to the topic Cleaning question, shroud unscrew? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/cleaning-question-shroud-unscrew/page/2/#post-253729 Tue, 24 May 2016 02:37:35 -0400 Does the baffle arrangement make any difference? I wasn’t paying attention to the order coming out, and just put them back short-long-short.

]]> cef207f6f8aedb18d71b3912b28d3ad5 the-sloth replied to the topic Chrony help, velocity spike in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/chrony-help-velocity-spike/#post-253686 Mon, 23 May 2016 03:09:18 -0400 Dman, do you know what size that screw is? And thanks for the tip on the o-rings, I saw the o-ring thread and need to put in an order.

Also, how does the valve unscrew from the action? I undid the set screw on the bottom of the action, not sure if it did anything, but still could not get the valve to budge.

In this video around 3:00 he unscrews…Read more

]]> 843989ee66a1f3ac570768d57fca370c the-sloth replied to the topic Chrony help, velocity spike in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/chrony-help-velocity-spike/#post-253683 Mon, 23 May 2016 02:29:35 -0400 Thanks guys, I did just that.

Also pulled the reg again and cleaned just in case. Also noticed a lot of oil in the air tube, enough to puddle up. Cleaned it out. Opened a new tin of JSB 18’s and backed away a bit from the chrony. Now shooting consistent 790’s. I’ll check again in the morning.

]]> 0638a2e1904fcc514f6cfb288626bfb8 the-sloth replied to the topic Baby replacement CZ barrel in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/baby-replacement-cz-barrel/page/2/#post-253418 Thu, 19 May 2016 12:14:23 -0400 The CZ barrel I received from R&L is working out wonderfully. It has the small gap at the stepdown that all seem to have, and no blow-by issues. Hopefully this weekend I’ll have a chance to stretch it out to 50 yds. Again, lots of gratitude to Randy and Tony for helping to get us all back up and running again. Loving my Mutant!

:8:

]]> 15e21a44198934f524d9cb88d51e19fb the-sloth replied to the topic Athlon Talos Review in the forum Optics/Nightvision https://talonairgun.com/forums/topic/athlon-talos-review/#post-252927 Thu, 12 May 2016 16:24:48 -0400 Wow, that is great CS. Did you talk to Kevin about the problems you were experiencing?

]]> 2d58edf78c11a6e4eff912fd4688c963 the-sloth replied to the topic John Hagan Mutant end cap adapter. in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/john-hagan-mutant-end-cap-adapter/page/3/#post-252903 Thu, 12 May 2016 14:07:11 -0400 Dman, are you still making these end cap adapters? I want to buy one. Sent you a PM a while back, not sure if you got it or not… Thanks

]]> 832987a0d6f81ed18f3b327b5e1f1975 the-sloth replied to the topic Athlon Talos Review in the forum Optics/Nightvision https://talonairgun.com/forums/topic/athlon-talos-review/#post-252894 Thu, 12 May 2016 12:09:20 -0400 Bummer. I bought a Talos BTR 4-14x a few months ago and it’s been great so far. This is my first FFP scope and I’m digging it. Let us know what Athlon has to say.

]]> 16b1bd8129bb9482cceee23ba817ceaf the-sloth replied to the topic Taipan Mutant Shorty For Sale.... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-shorty-for-sale/page/2/#post-252481 Thu, 05 May 2016 23:20:58 -0400 You guys are awesome. Now, how the hell am I going to get my barrel back from TGAG? :rofl:

]]> c0ad9c0eb33f374909bfd53973941761 the-sloth replied to the topic Taipan Mutant Shorty For Sale.... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-shorty-for-sale/#post-252439 Thu, 05 May 2016 15:04:24 -0400 Is this even for guns purchased through Peter & TGAG? I sent my German barrel back to Peter mid-April and haven’t heard a peep since. Wonder if Randy would help a guy out… just want a gun to shoot :sadn:

]]> 49f268e0cc1119f28cc6577bebb794ed the-sloth replied to the topic Fill Probe Not Sealing in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/fill-probe-not-sealing/#post-252330 Tue, 03 May 2016 13:02:47 -0400 Awesome, glad it worked. I don’t know why dealers don’t include the QD fittings with the probe.

]]> c96a22ed41c97c41d757ba2a5288c51a the-sloth replied to the topic Fill Probe Not Sealing in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/fill-probe-not-sealing/#post-252111 Fri, 29 Apr 2016 05:44:06 -0400 quote budlee:I also don’t think the probe is sealing in the collar of the hand pump, I think I need the female to male quick disconnect.

Bud, does your probe look kinda like this with the threads on the end? And you’re putting the threaded end into the pump without a quick disconnect? That’d most likely be your problem right there.

Pick up one…Read more

]]> 141a69f353645ca7b8249e3b60601634 the-sloth replied to the topic Chrony work in the garage in the forum BullPup General Chat https://talonairgun.com/forums/topic/chrony-work-in-the-garage/#post-251109 Sat, 16 Apr 2016 17:33:31 -0400 Good lord man, I hope you are wearing goggles! Get some rubber mulch and fill a small cardboard box with it. You won’t need to worry about ricochets or lead dust.

]]> 5f7055c9c65e12f38b26b8b12c710657 the-sloth replied to the topic I'm looking for a light-weight scope for a Short in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/i-m-looking-for-a-light-weight-scope-for-a-short/page/2/#post-251100 Sat, 16 Apr 2016 15:22:58 -0400 I’m giving the Talos 4-14x FFP a try right now, and it’s great so far. Clear and bright glass, nicely designed reticle. Illumination is very even. Turrets are a little stiff and clicks sort of mushy, similar to what you might find on Hawke Sidewinder. Slightly heavier but about an inch shorter than the 12x SWFA currently riding on my shorty. The…Read more

]]> a3ee66fd04131924f4f21b50de18a1f1 the-sloth replied to the topic Received Mutant Short Barrel Replacement From TGAG in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/received-mutant-short-barrel-replacement-from-tgag/page/2/#post-251095 Sat, 16 Apr 2016 14:44:10 -0400 Nice choice in beer, I like their porter. :biggrinn:

]]> f7794c605e8f00811ce752265e1348c7 the-sloth replied to the topic Expectations from a SHORT Bullpup in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/expectations-from-a-short-bullpup/#post-251016 Fri, 15 Apr 2016 15:54:25 -0400 My expectation at this level is 1/2″ ctc at 50 yards, indoors off bags/rest. I don’t think that’s a lot to ask from what’s being sold as a high-quality pcp. My intent was to use the shorty as a 50 yard and under critter hunting gun, but I’m scattering shots at that range, so with the German barrel it’s no good to me. I can’t have confidence in a…Read more

]]> 02d47b1eb94666f6f6c2374d34c756a0 the-sloth replied to the topic Mutant Test Groups - Different Barrels in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-test-groups-different-barrels/#post-250944 Thu, 14 Apr 2016 18:22:07 -0400 Steve, please repeat this at 50 yards – very interested to see how the results compare.

]]> 69a0d8dce14044b39a742f45bd73ab5c the-sloth replied to the topic Need a little help with barrel assemble in the forum EdGun https://talonairgun.com/forums/topic/need-a-little-help-with-barrel-assemble/#post-250927 Thu, 14 Apr 2016 16:42:41 -0400 Here’s a bunch of pics from an old thread that shows how the OEM shroud goes together: http://talonairgun.com/forum/viewtopic.php?t=28296

]]> a1bf76cf5be3fff8f006655662563c3b the-sloth replied to the topic Need a little help with barrel assemble in the forum EdGun https://talonairgun.com/forums/topic/need-a-little-help-with-barrel-assemble/#post-250919 Thu, 14 Apr 2016 15:32:58 -0400 You need the barrel tensioning nut to pull the upper assembly together. Screwing the barrel further into the breech block won’t do anything. Go back to OEM two piece shroud with John Hagan’s adapter if you want to run an LDC on the end.

]]> 88f3ea74267dce461792d5e505da61d2 the-sloth replied to the topic Received Mutant Short Barrel Replacement From TGAG in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/received-mutant-short-barrel-replacement-from-tgag/#post-250796 Tue, 12 Apr 2016 12:49:40 -0400 Cool, I got a message last week saying they were shipping out. Hopefully mine shows up in the next few days.

]]> d59fc64f0b9281545266e4c78805fd0f the-sloth replied to the topic Cutting Barrels, Tips and Rules in the forum BullPup General Chat https://talonairgun.com/forums/topic/cutting-barrels-tips-and-rules/#post-250529 Thu, 07 Apr 2016 16:54:34 -0400 quote Sir Ville:quote Wingman NZ:Like numb nuts said, choked barrels need to be shortened from the breech end.. between cutting threads new transfer ports chambers /pellet leads, crowns and internal breech o ring grooves it can be quite involved. A mill and a lathe is required to do a good job of it.

Nonsense ! A real man does it with a…Read more

]]> ec596662d31ab6e2f06c80ae6ba956ff the-sloth replied to the topic Edgun VS American crow in the forum EdGun https://talonairgun.com/forums/topic/edgun-vs-american-crow/page/2/#post-250522 Thu, 07 Apr 2016 15:32:28 -0400 quote shooter3:45FPE and a chest shot? How could that fly off? Please do not tell me that .22 is better than .25 for hunting.

The impact sounds like a firecracker and is enough to knock its ass out of the tree and send out a giant cloud of feathers, but instead of dropping dead it’ll spread it’s wings and flap off. IDK. The crows around here are…Read more

]]> 2c8d41131371a497cf6fb44da6a889a0 the-sloth replied to the topic Edgun VS American crow in the forum EdGun https://talonairgun.com/forums/topic/edgun-vs-american-crow/page/2/#post-250518 Thu, 07 Apr 2016 14:35:32 -0400 I’ve also had a few fly off after a solid front chest hit with the .25 @ 45 FPE which left me in a real WTF moment. .22 @ 30 FPE seems to knock ’em dead every time though. My only guess is that the .22 has better penetration through their feathers.

]]> 5aec2d6a78fb2a0128b8e24dd08a6c82 the-sloth replied to the topic Mutant Short TGAG barrel replacements in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-short-tgag-barrel-replacements/#post-249983 Wed, 30 Mar 2016 17:41:46 -0400 I was told mine (not sure if this applies to all?) would be shipping out early next week. If you want to know for yourself, just call. They’ve been good about returning calls promptly. Plus, squeaky wheel gets the grease :2:

]]> b40c131d6971b55b03e7529273c5a0c8 the-sloth replied to the topic Made in Germany barrel 50 yard groups in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/made-in-germany-barrel-50-yard-groups/#post-249322 Sun, 20 Mar 2016 17:04:58 -0400 Nice shooting, Keyser. The thing that gets my goat about the whole ordeal is that I had to wait for a month to take delivery of a gun that can’t shoot, and now it’ll be another month before I get a replacement barrel, and who knows how that’ll work out. The more I think about it the more I’m tempted to send this $1000 paperweight back and call it a day.

]]> 173c4233d22e45929be5132f67e3cd40 the-sloth replied to the topic How EDguns are made? in the forum EdGun https://talonairgun.com/forums/topic/how-edguns-are-made/#post-249310 Sun, 20 Mar 2016 15:46:37 -0400 Ed, thank you for sharing your pictures and a bit of history. Factory tours are cool and it’s neat to see how things are made.

Chris King factory tour is one of my favorites and is similar to your story. http://www.pinkbike.com/news/Chris-Kings-vision-Products-2012.html High-end bicycle parts manufacturer, based in USA. All materials sourced…Read more

]]> bdcf4e0b0042e04365b889e673c6af6c the-sloth replied to the topic Made in Germany barrel 50 yard groups in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/made-in-germany-barrel-50-yard-groups/#post-249307 Sun, 20 Mar 2016 15:31:25 -0400 quote mughram:did you clean the barrel before test ? because i have notice this barrel likes to be dirty !

also in i think you cannot compare to longer barrels guns … i have compare it with Edgun lelya 22 which is similar except lelya has LW barrel and i have notice in 50yards Taipan german barrel grouping better ( that’s only me ) and what i…Read more

]]> 142054e81b5bf067bd7c034c36644319 the-sloth replied to the topic Peter sold TGAG in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/peter-sold-tgag/#post-248856 Wed, 16 Mar 2016 03:44:22 -0400 So we should be emailing Joe about receiving the correct barrels for the shorty? I’m so confused.

]]> fd85b7f803733e45bc07d04b1ec7fd71 the-sloth replied to the topic odd regulating on this Short, whats your Es looking like? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/odd-regulating-on-this-short-whats-your-es-looking-like/#post-248747 Tue, 15 Mar 2016 02:24:53 -0400 Here’s 24 shots out of mine from 180-130 bar fill (tank running low on air) with JSB 18’s:

min 736.00
max 753.00
average 745.92
median 746.50
es 17.00
sd 5.03

Mine’s still straight out of the box, I haven’t touched any adjustments or done anything besides run some patches through the barrel. Less than 200 rounds fired. Hope you figure out what’s…Read more

]]> e943dd3ce05c19f19e9d0ad3b7779508 the-sloth replied to the topic Anyone else with shipping dates?? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/anyone-else-with-shipping-dates/page/5/#post-248625 Sun, 13 Mar 2016 21:59:19 -0400 I had a few sanity-regaining minutes away from the wife and boy today and took the opportunity to shoot the baby mutant with the “German” barrel. Unfortunately it’s pouring rain outside but at least it’s not windy. Six shot groups (half a mag) at 25 yards, shooting unsorted JSB 18’s @ 770 fps, using a cheap (wire mildot) UTG scope at 12x, prone…Read more

]]> 9663bbc2ec29a5ba75268bfff0470271 the-sloth replied to the topic Anyone else with shipping dates?? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/anyone-else-with-shipping-dates/page/3/#post-248570 Sun, 13 Mar 2016 01:45:55 -0400 I got one of the “German” barrels as well. Seems like a nice gun, but I feel a little like I’ve been duped, as I’m sure you all do as well. We were advertised Czech barrels, not the Korean barrels, and did not get what we paid for. What’s the best way to contact Peter? I’d like to voice my disappointment.

]]> 456e7c9a2c137f8ac853d75342246ac4 the-sloth replied to the topic Anyone else with shipping dates?? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/anyone-else-with-shipping-dates/#post-248416 Fri, 11 Mar 2016 13:32:23 -0400 Mine shipped out of AZ on Tuesday and should be here by Saturday. Ordered back on 2/11. Hopefully I’ll get some time this weekend to see if she’s a shooter!

]]> 02e894bc303c8ac0fa5f426d15965eea the-sloth replied to the topic Tuning your gun in the forum EdGun https://talonairgun.com/forums/topic/tuning-your-gun/#post-246931 Wed, 24 Feb 2016 19:12:18 -0400 I’ve been using moly paste on the bolt and action. Honda M77 (Molykote 77), MSDS says 50-75% moly. Good stuff. I’ve tried running the bolt a few different ways – 5w20 oil (fcuk no), light semifluid grease (still sticky), moly-lithium grease (not bad) and the paste definitely feels the best to me. You’ll want to open ‘er up, clean out the old shit…Read more

]]> 0c9f7ff6c8ec19f882aa3f9dfe57fd61 the-sloth replied to the topic Mutant Shorty on the way? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-shorty-on-the-way/#post-246928 Wed, 24 Feb 2016 18:45:01 -0400 When did you guys order yours? I put mine in on the 11th, no notification or update for me so far. Hopefully soon!

]]> f6d70472c9cfe329760c6a2b5e4c1926 the-sloth replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/page/3/#post-223195 Tue, 31 Mar 2015 17:48:56 -0400 Kick ass!

Want to do mine? 😉

]]> d1f6ef91a3ac2bc3f5603c1ec1353b7c the-sloth replied to the topic Can anyone in Europe or England get one of these for me? in the forum BullPup General Chat https://talonairgun.com/forums/topic/can-anyone-in-europe-or-england-get-one-of-these-for-me/page/2/#post-222445 Sat, 21 Mar 2015 14:38:48 -0400

]]> 0d4f6671791536ccd778fcdd14a1343c the-sloth replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/#post-221789 Sat, 14 Mar 2015 14:55:36 -0400 quote Haggard616:I got my LW barrel from the FX/AOA giveaway. I pushed a pellet through it and it has very sharp and nice rifling markings.. It also slid through very smoothly until the last couple inches where it hit the choke. Looking down the barrel with a light also assures me that this barrel is likely to be a good one!

Same here – Turned…Read more

]]> c32e673351122770a8bb8d2dae5e6f10 the-sloth replied to the topic Any machinists want to help a brotha out? in the forum Mods/Machinists https://talonairgun.com/forums/topic/any-machinists-want-to-help-a-brotha-out/#post-221630 Thu, 12 Mar 2015 20:18:12 -0400 Haggard, did you ever hear back from Marmot Militia?

I’m in the same boat… have a new barrel and looking for a machinist to whittle it down to fit a Prod…

]]> f61bb5dd3f6fd6c1389abb74a71a0fa6 the-sloth replied to the topic What's your favorite gun under 2k? in the forum BullPup General Chat https://talonairgun.com/forums/topic/what-s-your-favorite-gun-under-2k/#post-221128 Fri, 06 Mar 2015 19:40:26 -0400 quote SaltwaterSlick:Dang Manny, sorry to hear that! You should set up a sandwich stand selling pulled pork sammiches! Those feral pigs make some mighty good eatin’… Bet you could get top dollar for a stuffed pork loin! Think outside the box man!

…and marketed as wild-caught, organic, and local. Start a food truck, park it out at the…Read more

]]> d6ba6e2cabb1a6963c79f41392449cfe the-sloth replied to the topic Reduced Report .25 R3M Std in the forum EdGun https://talonairgun.com/forums/topic/reduced-report-25-r3m-std/page/2/#post-221126 Fri, 06 Mar 2015 19:27:40 -0400 I would think that a single shot (brain shot-DRT) with the .25, done late at night when everyone’s sleeping/lazy, with an IR NV setup to operate in darkness, LDC to keep the volume down, would go pretty much unnoticed. However…

My experience with the R3M .25 is that it is not a “stealth” gun. The sound made by the pellet sizzling through the…Read more

]]>