Talonairgun | tkerrigan | Activity https://talonairgunforum.com/members/tkerrigan/activity/ Activity feed for tkerrigan. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 4a4f666024462527d235050fce00b724 tkerrigan replied to the topic Evanix semi autos coming in the forum BullPup General Chat https://talonairgun.com/forums/topic/evanix-semi-autos-coming/#post-276671 Sat, 08 Dec 2018 18:35:46 -0400 I’ve played with turning up the hammer spring, heavier pellets and it seems to me there is very little performance improvement available without causing problems. It shoots good as it comes, so no problem. I’m going to quit messing with it. I’m thinking for more power and heavier pellets it should have a heavier probe to stay in engagement…Read more

]]> cd658d5181279d52db2106eb8863b76f tkerrigan replied to the topic Evanix semi autos coming in the forum BullPup General Chat https://talonairgun.com/forums/topic/evanix-semi-autos-coming/#post-276666 Fri, 07 Dec 2018 16:44:47 -0400 I haven’t had time to shoot them, between my wife and I we have medical appointments almost every day. She is getting better now so should have some time upcomming. Besides which, it’s pretty cold right now. Regards, Tom

]]> 3afe91f17d3653ef0cb0f12891907bc2 tkerrigan replied to the topic Evanix semi autos coming in the forum BullPup General Chat https://talonairgun.com/forums/topic/evanix-semi-autos-coming/#post-276651 Sun, 02 Dec 2018 19:37:57 -0400 I’ve got a .22 and a .25 Air Speed and they both shoot good. And a .30 on order. Regards, Tom

]]> ad85ba5b9a915e06efc691d966f506df tkerrigan replied to the topic Bulldog power valve in the forum Bulldog .357 https://talonairgun.com/forums/topic/bulldog-power-valve/#post-275320 Fri, 01 Jun 2018 16:47:04 -0400 Hi RC, it is a drop in kit as far as I can tell. It all goes between the air tube and the receiver. I’m not shooting it right now as the poppet had an aluminum chip in the seal line. By the time I removed the chip and tried the abrasive – drill proceedure it leaked worse. So I ordered a new air valve housing from Crosman at $16.95, love their…Read more

]]> ad85ba5b9a915e06efc691d966f506df tkerrigan replied to the topic Bulldog power valve in the forum Bulldog .357 https://talonairgun.com/forums/topic/bulldog-power-valve/#post-275320 Fri, 01 Jun 2018 16:47:04 -0400 Hi RC, it is a drop in kit as far as I can tell. It all goes between the air tube and the receiver. I’m not shooting it right now as the poppet had an aluminum chip in the seal line. By the time I removed the chip and tried the abrasive – drill proceedure it leaked worse. So I ordered a new air valve housing from Crosman at $16.95, love their…Read more

]]> dc56abca2228e441422ff4aef3dd91eb tkerrigan replied to the topic Interest Check - Taipan Mag Holders - Cricket Too! in the forum BullPup General Chat https://talonairgun.com/forums/topic/interest-check-taipan-mag-holders-cricket-too/page/4/#post-274619 Mon, 12 Mar 2018 05:19:51 -0400 I ordered and received right away 8 .25 Veteran mag holders. 4 for me and 4 for a buddy. All are working a treat. Now you know why the pricing goes up to 8 now. Regards, Tom

]]> a7efc763596b5da534f973833d55b8f5 tkerrigan replied to the topic Is Elmer Keith's 358429 the perfect bullet for the Bulldog? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-elmer-keith-s-358429-the-perfect-bullet-for-the-bulldog/#post-266413 Sat, 18 Feb 2017 19:03:35 -0400 I haven’t got back to working on the Bulldog yet, got sidetracked casting bullets and trying to get a good group out of my K1 Huben. Regards, Tom

]]> e5454c56748b8fac7ab1424340cec297 tkerrigan replied to the topic New Evanix Max 480 Semi Bull Pup 2.4KG ??? in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-evanix-max-480-semi-bull-pup-2-4kg/#post-266395 Sat, 18 Feb 2017 03:51:20 -0400 I haven’t seen any mention on whether the semi-auto action is electric or mechanical. Regards, Tom

]]> 0ce6d02f605d6ac76f67f4d1cae376f3 tkerrigan replied to the topic Benjamin Wildfire - GAME CHANGER in the forum Other Guns https://talonairgun.com/forums/topic/benjamin-wildfire-game-changer/#post-264655 Thu, 12 Jan 2017 07:45:45 -0400 I’ll wait for Amazon to put them up for sale at $85 or less. Regards, Tom

]]> 69bd9fc9b503194a63936dc413ce9864 tkerrigan replied to the topic Is Elmer Keith's 358429 the perfect bullet for the Bulldog? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-elmer-keith-s-358429-the-perfect-bullet-for-the-bulldog/#post-264005 Mon, 02 Jan 2017 18:01:02 -0400 The only thing I’ve heard about Lakerat was that he might be making moderators and tubes, etc for the Bulldog in the future. I’ll try some pellets in the BD today to make sure that the heads don’t get shaved going past the port. The port is at 85% of bore size right now and that may be pushing it. If the probe isn’t too complicated, I will try…Read more

]]> da3f857a6db351bc55e7572c9107bfca tkerrigan replied to the topic Is Elmer Keith's 358429 the perfect bullet for the Bulldog? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-elmer-keith-s-358429-the-perfect-bullet-for-the-bulldog/#post-263931 Sat, 31 Dec 2016 20:11:23 -0400 Yesterday I enlarged the ports of the Bulldog by about .020″ using an “N” letter bit which should take it to .302″. I shot some of Roachcreek’s 178gr bullets and the following resulted. Filled to 3000 to 3100lbs, 783fps, 812fps, 809fps, 791fps. This was without tethering. I was a little disappointed that the FPE only went from 259 to 261.…Read more

]]> 425303fc59e38e8e73e14bf1e973e825 tkerrigan replied to the topic Is Elmer Keith's 358429 the perfect bullet for the Bulldog? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-elmer-keith-s-358429-the-perfect-bullet-for-the-bulldog/#post-263295 Sat, 17 Dec 2016 23:56:44 -0400 Hey Roachcreek, I’d be delighted to try some of your bullets in the Bulldog. If I come up with something good I’ll send you some. Regards, Tom

]]> a01fc32c61fbf096ec5273b320f5c136 tkerrigan replied to the topic Is Elmer Keith's 358429 the perfect bullet for the Bulldog? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-elmer-keith-s-358429-the-perfect-bullet-for-the-bulldog/#post-263154 Wed, 14 Dec 2016 19:30:40 -0400 That bullet sounds good to try, Bulldog barrel is 1:14″ twist and I have heard that it likes about .356 diameter, I have a BBT mould, so will be trying it when I get some cast. Regards, Tom

]]> 9c3e3e2a418a4a1f3d5c53797196be1f tkerrigan replied to the topic Huben K1 showed up today in the forum Other BullPups https://talonairgun.com/forums/topic/huben-k1-showed-up-today/#post-258124 Tue, 30 Aug 2016 20:54:58 -0400 I’m holding off doing the 50yd groups until my glasses show up, about 9 days from now. I just had double cataract replacement in the last 5 weeks. It just loves the JSB 34gr beasts, they fit perfect in the mag. Regards, Tom

]]> 7cf02b305a3f4283d0d9236bac3789d4 tkerrigan replied to the topic Is it that bad? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-it-that-bad/page/2/#post-255695 Thu, 30 Jun 2016 07:24:40 -0400 I just measured the lands ID to get an idea of what size of bore riding bullet molds to order. I would have to take the guns apart to get a good bore measurement, so that will wait until the gun is apart for other work. Regards, Tom

]]> 3ddb1210aad6732764df57297e6dc7d3 tkerrigan replied to the topic Is it that bad? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-it-that-bad/#post-255683 Thu, 30 Jun 2016 03:19:59 -0400 I measured the ID of the lands on 6 different .357’s today and the Bulldog was .351″ , pretty accurate as I used precision pins. The other sizes were as follows. Ultra .353″, Slayer .353″, TJ .349″, Ace Titan .354″, Hatsan .352″. Regards, Tom

]]> ee618b4521f0ffadaba9ed93b026183b tkerrigan replied to the topic Is it that bad? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-it-that-bad/#post-251201 Sun, 17 Apr 2016 15:35:56 -0400 Just remove the barrel and the air tube, shake out the poppet, then you drill down through the rear barrel set screw hole for the transfer port and then do the barrel, I looked through the air tube hole to see when the bit broke through. Might be able to pick up some more power by not using the poppet spring, all the air has to go through the…Read more

]]> ac1f6a9f8097aa60ddbf4cfc0003c665 tkerrigan replied to the topic Is it that bad? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-it-that-bad/#post-251045 Fri, 15 Apr 2016 21:58:07 -0400 OK, through the Bulldog, today I shot 1 161.3gr RN .713 long at 826fps for 244fpe, 4 185gr spitzer .915 long at 711fps for 208fpe and a 5/8″ group at 50 yards, that is excellent because I am a bit wobbly, 5 231.5gr spitzer HP’s 1.075 long at 652fps for 219fpe and a 1.5″ group. I have the mold for the first bullet so I will get a group later.…Read more

]]> 5363f096fb98627e540b86f9eff01550 tkerrigan replied to the topic Is it that bad? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-it-that-bad/#post-250782 Tue, 12 Apr 2016 01:17:44 -0400 Are you back in the same location south of me? I can send you a file with an exploded drawing if you don’t have one already. Or anybody else that wants one. It’s quite a lot better quality of drawing then Crosman-Benjamin usually puts out. Regards, Tom

]]> 66e14fcb1c47ec477d9a8a1323d9cd75 tkerrigan replied to the topic Is it that bad? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-it-that-bad/#post-248521 Sat, 12 Mar 2016 17:45:04 -0400 Mine’s never leaked a pound, the hammer spring is very easy to get at, and the ports look small and there should be power available by opening them up. I think it’s pretty clever the way they are put together. No gaskets for the transfer port, just a very close fit with barrel set screw locating and and tightening the port.…Read more

]]> 814668a1ab4618f92af915e20af90753 tkerrigan replied to the topic Is it that bad? in the forum Bulldog .357 https://talonairgun.com/forums/topic/is-it-that-bad/#post-248426 Fri, 11 Mar 2016 17:03:24 -0400 I’ve got one Charlie, it’s not that bad. Just needs longer bullets for the 14″ twist. Regards, Tom

]]> 8e3f8a4462e3e2da59a3cbdce160074d tkerrigan replied to the topic My Shelden 4500 compressor in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/my-shelden-4500-compressor/page/3/#post-247836 Sun, 06 Mar 2016 02:44:50 -0400 I have a Sheldon 4.1 and it is a fine piece of machinery. I ordered it gas powered, I thought I might want to take it someplace without electricity. After three years never taking it anyplace and a small problem with the ss tube from the fourth stage cracking at the flare about 5 times, I switched it to electric, quieter and no more cracked tube…Read more

]]> 0c40b31447162089a266fdff7e0484d1 tkerrigan replied to the topic AMerican air arms out yet ?? Anyone get there's ?? in the forum Other BullPups https://talonairgun.com/forums/topic/american-air-arms-out-yet-anyone-get-there-s/page/2/#post-247775 Sat, 05 Mar 2016 16:54:59 -0400 I have a regulator that goes between the tank and the gun. Regards, Tom

]]> 44239a159af713b49cd9b73eb3ead453 tkerrigan replied to the topic XP airguns ranger 45 caliber 36inch barrel MONSTER ! in the forum Other Guns https://talonairgun.com/forums/topic/xp-airguns-ranger-45-caliber-36inch-barrel-monster/page/12/#post-247089 Fri, 26 Feb 2016 16:51:01 -0400 A good way to tell if Dan M built the .401’s would be if on the bottom of the action there is an aluminum plug in line with the transfer port. I can’t recall if the Quigly was built like that now, hell getting old. Dan H does the Ranger have a plug in line with the transfer port? Anybody, does the Bushbuck have that also? If Dan M is…Read more

]]> 3bb6c79fb1695176acdd46d4da217974 tkerrigan replied to the topic AMerican air arms out yet ?? Anyone get there's ?? in the forum Other BullPups https://talonairgun.com/forums/topic/american-air-arms-out-yet-anyone-get-there-s/#post-246929 Wed, 24 Feb 2016 18:48:34 -0400 The speed of the 145gr noslers is 860fps at 3200psi regulated. Probably should turn the hammer spring up a bit. Regards, Tom

https://imageshack.com/i/poHF41vgj

]]> 05d7b84a0a94e0f68d322e44f3304324 tkerrigan replied to the topic XP airguns ranger 45 caliber 36inch barrel MONSTER ! in the forum Other Guns https://talonairgun.com/forums/topic/xp-airguns-ranger-45-caliber-36inch-barrel-monster/page/12/#post-246920 Wed, 24 Feb 2016 17:14:23 -0400 I just went to his site and the price was $1400 plus $150 for the longer than 28″ barrel and it came with an unfinished stock. That makes the $1895 price not too bad, he may have had to raise the price of guns if he was still selling direct anyway. Regards, Tom

]]> 84cbf40fbe06203b3da7fdd36409d960 tkerrigan replied to the topic AMerican air arms out yet ?? Anyone get there's ?? in the forum Other BullPups https://talonairgun.com/forums/topic/american-air-arms-out-yet-anyone-get-there-s/#post-246774 Sun, 21 Feb 2016 18:03:40 -0400 Mine’s here, just put a scope on it yesterday and sighted in at 9 yards to get horizontal lined up. One hole at that distance of course. Used 145gr Noslers, will have some 127gr Hunterssupply’s Monday or Tuesday just in time for better weather I hope. I’ll go out in a bit and see how fast the Noslers are. I’ll put a bi pod on it also, as the…Read more

]]> 05d895688d6fd42a927c0c13addbf939 tkerrigan replied to the topic Airmax PCP Pistol in the forum Other Guns https://talonairgun.com/forums/topic/airmax-pcp-pistol/#post-245780 Thu, 11 Feb 2016 06:57:50 -0400 I went out to the shop and installed a bug buster 3×9-32 on mine. As it came it was shooting 18.1’s at 537 to 540fps. Just taking out most of the first stage travel really sweetened up the trigger. I turned the hammer spring up some and it shot 18.1’s at 619fps. Could have turned it further. One thing, if you rest your thumb no matter how…Read more

]]> 502c7779cbe2a780600ffe8aa3acc621 tkerrigan replied to the topic Mrodair Compressor Guinea Pig in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-compressor-guinea-pig/page/7/#post-244950 Wed, 03 Feb 2016 17:37:32 -0400 USPS doesn’t normally get any shipment information entered until after the package is delivered anyway. Regards, Tom

]]> 7ce29d38ede2c815343472c952115a4c tkerrigan replied to the topic Gun Vise for short guns in the forum BullPup General Chat https://talonairgun.com/forums/topic/gun-vise-for-short-guns/page/2/#post-241090 Sat, 12 Dec 2015 06:04:27 -0400 You guys would have to get on these CTK Precision vise-gun rests, now I have one coming also. Regards, Tom

]]> 0135252f40f09d8155caece828f8626e tkerrigan replied to the topic Workshop Pictures in the forum Mods/Machinists https://talonairgun.com/forums/topic/workshop-pictures/page/6/#post-240654 Fri, 04 Dec 2015 18:15:51 -0400 I started out with the Harbor Freight mill just barely visible on the left. Then I got a good deal for the 12 X 36 Grizzly gunsmith’s lathe and the Grizzly mill on the right both of which came with some tooling. This is in Oregon so I built an 8′ X 12′, 6″ thick insulated walls room to keep them and my tools in. Regards, Tom

]]> 051eafd76ae67d69c14625efa4625b39 tkerrigan replied to the topic p30 velociraptor in the forum Other BullPups https://talonairgun.com/forums/topic/p30-velociraptor/page/2/#post-234546 Sun, 23 Aug 2015 03:09:24 -0400 I got one on order, IE worked. Does the LDC come back over the barrel or mount on the end? Regards, Tom

]]> 5b84531615ab36a7e7ae10d83b0456e7 tkerrigan replied to the topic p30 velociraptor in the forum Other BullPups https://talonairgun.com/forums/topic/p30-velociraptor/#post-234482 Sat, 22 Aug 2015 00:35:50 -0400 I put one in the shopping cart and it shows nothing in cart when I try to pay. Also can’t find anyplace to buy moderator. Regards, Tom

]]> 3a3c6578bd2bb037f77071a5172f2e00 tkerrigan replied to the topic HUBEN K1 in the forum Other BullPups https://talonairgun.com/forums/topic/huben-k1/page/2/#post-230725 Mon, 06 Jul 2015 06:30:34 -0400 Maybe, Maybe not. I don’t know how large the Co. is, maybe 200 is all they can make for the first batch? I guess we will know for sure in about three months.
Regards, Tom

]]> e7b94628dbdbfa6a5d03147fa0c0dd8e tkerrigan replied to the topic Can you easily set a Cricket to -/+ 65 FPE ? in the forum Kalibrgun https://talonairgun.com/forums/topic/can-you-easily-set-a-cricket-to-65-fpe/#post-228833 Mon, 15 Jun 2015 22:20:33 -0400 I don’t know, it shoots so good I don’t want to mess with it. Regards, Tom

]]> f5e174a5850e61277ddb77d743f02884 tkerrigan replied to the topic Can you easily set a Cricket to -/+ 65 FPE ? in the forum Kalibrgun https://talonairgun.com/forums/topic/can-you-easily-set-a-cricket-to-65-fpe/#post-228798 Mon, 15 Jun 2015 16:20:50 -0400 I ran some of the new JSB 33.95 pellets through my .25 carbine and got 860fps 56fpe not changing anything. Gun is completely stock. Regards, Tom

]]> 470d256d32424d753d674cf21ab46143 tkerrigan replied to the topic Sniperqty gun mount in the forum Airgun Technology https://talonairgun.com/forums/topic/sniperqty-gun-mount/#post-222667 Tue, 24 Mar 2015 04:34:06 -0400 If you google “Spotting Scope Window Mount”, you may find something suitable.

This one wouldn’t be too bad. I couldn’t copy the picture. When you release the trigger it locks. Regards, Tom

Weaver Optics Window Mount with Ball Head for Spotting Scope #849695

$51.59
Buy It Now
Part: 849695. The Weaver Optics Window Mount with Ball Head…Read more

]]> bde827f8d619134524a53feb0d427eca tkerrigan replied to the topic Hummingbird Review??? in the forum Kalibrgun https://talonairgun.com/forums/topic/hummingbird-review/#post-218845 Fri, 06 Feb 2015 08:00:50 -0400 The barrel can also be easily indexed by removing the shroud and labeling the 4 holes on the end adapter. Mine needed it. Regards, Tom

]]> b4d9bc82f35f975549428551d1948a41 tkerrigan replied to the topic Ed / Tony, update on availability of spare mags? in the forum EdGun https://talonairgun.com/forums/topic/ed-tony-update-on-availability-of-spare-mags/#post-214075 Sat, 22 Nov 2014 23:54:39 -0400 I would also like to be added to the list for two .22 R3M magazines for the gun I just bought. Regards, Tom tkerrigan @ yahoo.com

]]> 553a9298784a93383ba00f0b4a5dcbbb tkerrigan replied to the topic Hawk S/winder tact,$ 299 at optics planet in the forum Kalibrgun https://talonairgun.com/forums/topic/hawk-s-winder-tact-299-at-optics-planet/#post-213900 Wed, 19 Nov 2014 04:08:09 -0400 I just ordered a sidewinder tact for $319 over my phone. Regards, Tom

]]> d1355363b5573329ea3e9be7b92e5246 tkerrigan replied to the topic Thanksgiving Edgun small caliber sale from Edgun USA. in the forum EdGun https://talonairgun.com/forums/topic/thanksgiving-edgun-small-caliber-sale-from-edgun-usa/#post-213488 Wed, 12 Nov 2014 16:55:01 -0400 I’m very tempted on an R3 at $1500, just cant find anyplace to order one. How about a link or phone number? Regards, Tom

]]> 11755e6eec1c4123515d82a6ae350f8f tkerrigan replied to the topic Just ordered a Colibri in the forum Kalibrgun https://talonairgun.com/forums/topic/just-ordered-a-colibri/#post-212026 Thu, 16 Oct 2014 00:30:01 -0400 I ordered one also. Regards, Tom

]]> efb61bfb83b53402f55d65f3ecbffe83 tkerrigan replied to the topic Another P12 @ Home in the forum P12 https://talonairgun.com/forums/topic/another-p12-home/page/3/#post-204420 Fri, 06 Jun 2014 13:51:14 -0400 You can just screw the trigger rod into the reg and pull it out the back of the tube. Mine was leaking due to manufacturing debris, cleaned the tube and the o-ring and it sealed up. Regards, Tom

]]> 41cb272305b2574f5b842f5dc2c5640b tkerrigan replied to the topic Huma Reg Adjustment in the forum P12 https://talonairgun.com/forums/topic/huma-reg-adjustment/#post-203830 Fri, 23 May 2014 16:00:44 -0400 Has anybody looked into how much space is in front of the regulator? Considered making some spacers? Might improve the shot cycle with a bit more space in front of the reg. I have read somewhere that one CC per Ft Lb is ideal. Mine does work well. Regards, Tom

]]> 228a2b55543fbc12bcf0fbb70477f516 tkerrigan replied to the topic p-12 arrived at 2.30 cst in the forum P12 https://talonairgun.com/forums/topic/p-12-arrived-at-2-30-cst/#post-203713 Wed, 21 May 2014 05:06:53 -0400 Mine was losing air also, about 400psi a day. The tube wasn’t wiped out before the reg was installed and manufacturing shavings were around the outside o-ring. I cleaned the tube and o-ring and lubed good and no further problems. Easy gun to work on. If you need to remove the reg just screw the threaded end of the trigger rod into it and the…Read more

]]> 25f802ad932584fa38ac5deb329279a7 tkerrigan replied to the topic Any new news on P12 in the forum P12 https://talonairgun.com/forums/topic/any-new-news-on-p12/#post-203386 Wed, 14 May 2014 06:46:35 -0400 Mine is regulated, is set to shoot 18.1 850-855fps and 14.3 premiers at 910-915fps. As mentioned, very accurate. I’ve only shot 20 yards on a shaky table and got about 1/2″ groups. Regards, Tom

]]> 00af31aca296f327be3bbf157211955d tkerrigan replied to the topic Who has experience with Dive Compressors in the forum BullPup General Chat https://talonairgun.com/forums/topic/who-has-experience-with-dive-compressors/#post-190902 Tue, 14 Jan 2014 04:29:47 -0400 Check this place out, I have one that I have put 30hrs on, its the Model bGAS4-2, if I had it to do over again, I would have ordered the electric motor unit, just too loud. This guy has an excellent reputation, http://sheldensportinggoods.com/

]]> 9372d60d4205f6838b45f8e3c943dc5d tkerrigan replied to the topic CF 60 Minute tank bag in the forum Other Guns https://talonairgun.com/forums/topic/cf-60-minute-tank-bag/#post-187724 Fri, 20 Dec 2013 05:07:39 -0400 Hi, looks great. Does it fit inside length wise with the valve installed and where did you buy it? Regards, Tom

]]> feb1555220cc5c8e1a8a9c9436bb6b8d tkerrigan replied to the topic hatsan pcps in the forum Other Guns https://talonairgun.com/forums/topic/hatsan-pcps/#post-180903 Mon, 07 Oct 2013 18:51:25 -0400 Just went out to the shop and checked pull on several Hatsan pcps. I think these are adjustable, but haven’t had any desire to do so.
BT65SB .25 2lb 3oz
AT44 .22 Long 3 2
AT44 .25 Long 3 3
AT44PA .22…Read more

]]> 3b4c1d32068ff03b82763793ed9a984f tkerrigan replied to the topic hatsan pcps in the forum Other Guns https://talonairgun.com/forums/topic/hatsan-pcps/#post-180895 Mon, 07 Oct 2013 15:48:47 -0400 I don’t see how they get a light trigger pull on any springer with the huge spring pushing against it. I’ll check trigger pull today. The most irritating thing about them to me is the automatic safety. Regards, Tom

]]>