Still testing that as of now.

Suuuure! Send them on my way sir.

Had a chance to see these in person when i recently went to Colorado which i met up with the guys at Predator International. I also hunted prarie dogs there went a bunch of friends and witnessed these pups in action. While we did not target shot with…Read more

Things are looking good so far and its good to see your getting a little more than what you wanted. The OEM bottles volume has a lot to do with your numbers and once you change that to a CF tank, I could see your speed/fpe increasing for sure.

Another thing is to NOT go up or down a full turn on the PW. Try using all those numbers to get…Read more

*****A BIG THANKS TO TONY AT TALON TUNES FOR SENDING THE STICKERS AND TSHIRTS. MY SON LIKES STICKERS. THANKS TONY :8: *****

Will keep you guys posted on my thoughts and Masons too as well as our results

Love what you have done.

Air power is soooooo damn cool!

I on the other hand can’t imaging how a BT that looks ALMOST like a GC could have a LOWER BC. So I tend to believe MY TEST RESULTS :rofl:

I ordered the LBT 90 gr cause Carl said they are excellent then i borrowed some from Doug and they shoot damn well from my gun now i here the 257388 is even better. Doesn’t surprise me though as the original Ideal bullet they were copied from shot very well in my gun too. But…Read more

Are the 90 gr LBT’s in Devo’s picture above the same ones you shoot from LBT? I had never seen a picture of them.

Thanks again UncleDevo for the heads up on them. I see some other calibers i want to buy.

WOW…that’s some worshiping there Devo……..lol!

I’m gonna buy one……………..

Thanks again!

I see so many copies like the new 401 Badger. Looks just like his work on the Corsair.

Has anyone even gotten a new Ranger from Dan.

Im sure they will make me happy……lol!

the question came up because i HEAR THEY ARE MORE ACCURATE than the…Read more

I was going to suggest sleeving your barrel with Carbon Fiber. But its been suggested.

Also, since you shoot competition, try sorting your slugs to within .5 a grain.

I’ve been doing some research and it looks like the .270 in cast bullet config can make some HIGHER than everyone else’ BC numbers. WOW!

RCBS bullet molds:
A .257″ 120 gr has a BC of roughly .272
A .277″ 150 gr has a BC of roughly .327
A 7mm 168 gr SP has a BC of roughly .306
A .308″ 165 gr…Read more

STILL WAITING ON DOUGS SLOW ASS THOUGH>>>>>>>lol!

I’ve been doing some research and it looks like the .270 in cast bullet config can make some HIGHER than everyone else’ BC numbers. WOW!

RCBS bullet molds:
A .257″ 120 gr has a BC of roughly .272
A .277″ 150 gr has a BC of roughly .327
A 7mm 168 gr SP has a BC of roughly .306
A .308″ 165 gr Silh has a BC of roughly .286…Read more

I say go for it and put another caliber out there. A 308 airgun would be a great candidate platform.

I would prefer the 7mm and 308 as i think the BC’s of those two rounds round be somewhat superior…Read more

Starting the slow process of modding this gun with the stock.

The ORIGINAL (but maybe not final) goal is to have the OEM stock have the profile of the BSA R10 stock.

At the butt of the…Read more

And yeah, you should really order up some of the 310 gr 457 HP’s that RJ Porter sells. Those bullets were the cats meow in my old 457 Haley and destroyed anything hit…Read more

Hmmmmmmm, many, not ALL, have dingy wooden fences with neighbors about 50 yards or less aways. I keep hearing about LIMITED RANGE of pellets! Yeah, some 500-600 yards plus or minus some is…Read more

Not only that but now your loosing WAAAAAY MORE AIR TOO without reworking the valve.

These are not 12 fpe rifles nor shrouded bullpups. Just saying………..

We have all proven airguns can kill Crosman. WE KNOW THIS ALREADY! Not against hunting at all. I love it. Accuracy and reliability should be more of a proving point than KILLING.

If you wanna REALLY sell airguns to the PB community, or…Read more

NICE TO SEE YA SIR! OK OK, i will leave Doug alone now. But i can’t speak for that damned Mike.

But im gonna keep the MA (mad Dog stock) TA (talon) DOR (con DOR). But you can have the credit….i don’t want to be famous anyways…..lol!

How have you been?

Like Doug stated, its OVER 253-254 from breech till the last 2″ of the muzzle where its choked down to roughly .249. I’ve heard that the LW barrels vary greatly BEFORE the choke.

So what i’m saying is……….standard practice…Read more

But its ok, we had some good times, GREAT TIMES i MEAN and they will never be forgotten. Its time for a new girl and to make some new memories….

If i had it all over to do again, i would have started out with the Condor Frame as opposed to Talon. THe Condor also because the frame looks better than the Talon frame when in THE 257 configuration. Longer barrel and such. The condor is the better option.

I had a bunch of videos and…Read more

But seriously, the TALONDOR was coined by me. I bought a Talon 22 many years ago then upgraded the system with a condor valve from Airforce. I then modded that valve over time. I then made it .250 cal by simply buying a new barrel. So i then had me a 25 cal pellet thumper. it was making…Read more

Stay tuned!

Tofazfou

209 bucks and solid as hell.

Yes sir, with this gun, when you go up or down 100 psi +-, you DO notice a POI shift. These guns have no return spring and they are set up to make the MAX amount of power as per the guns design.

With it being a SIMPLE QB design, it would be pretty EASY for a machinist to REMAKE you or anyone else a receiver. They are simple. In other…Read more

But its clear all the way up

Stay tuned for more

Nice amount of damage though never the less.

There, i said it.

Once on the Yellow and once here.

Oh yeah, I SUB’d you

THANKS

SOme forget that “you can’t have FPE without FPS!”

…and yeah, that saying is copyrighted so i’ll sue you any of you YEWTS try to use it………. :winkn:

2 things. Yeah, i found out from doug recently that you can get barrels BIGGER from TJ. Wished i would have know that much earlier in the game.
2nd, what 357 barrel are u getting? 16″ twist or the 26″ twist?

Powderburner,

Thanx man. I love it much more too. That’s the only thing with barrels in the white…….they aren’t…Read more

Just a heads up. FInd out the barrels O.D. and search the net for the correct CF tube I.D.. You want the tube to be sorta “GLOVE” fitting or tighter to the barrel. Tighter is better than a VERY LOOSE FEEL.

You can always sand out the inside of the CF tube if its just a cunt hair smaller than the barrels O.D. but you can’t go the OTHER…Read more

Was over at Doug Nobles the other day and he fitted CF tubes to his upcoming 7mm barrel. His hammer is barrel riding instead of FRAME RIDING. Well, he installed the CF tubes from the muzzle up to the point where the hammer rides on the barrel during its cocking and firing cycle. In other words the entire barrel except the last 4-5″…Read more