I’m new also. I bought a Condor SS and SCUBA tanks a few months ago.

I bought two 100 cubic foot SCUBA tanks, that fill to 3,500 lb/sq in. from a local dive shop that was going out of business. I got two, in great shape, for $300 total. You can find such bargains on Ebay. I live near several dive shops and can get both tanks topped off…Read more

I removed the gauge from my AirForce fill adapter and installed it on my Condor. It’s larger, more accurate, fits normally, has a rubber bumper around the edge, and looks like it belongs there.

If not that, I’d take a look in the paintball world. They’ve go a lot of stuff that works well on airguns and are reasonably priced.

Tuko

Sent from my buckboard using smoke signals

Nothing shoots better than the Eun Jin 28.4 Grn Domed and Eun Jin 32.4 Grn Pointed so I us a lot of them.

The Eun Jin 28.4 Grn Domed with the TT Top Hat and stock 1…Read more

The inserts allow using lighter weight pellets at lower speeds. It’s a lot quieter. It uses less air. There’s less risk down range.

I keep the large insert in my Condor SS .22 almost all the time. With 19gn pellets It’s shooting around 900FPS.

When I want to slam something hard with a 32gn Eun Jin, I take…Read more

Did you know that California leads the Nation in the export of Fruits and Nuts?Attachments:

TukoAttachments:

I ordered the Airforce Refill Adapter with the Quick-Disconnect Nipple. That gives me a tank drain tool and a tank fill tool.

I still want a bleed valve on the gun.

Tuko

Thanks for posting the idea and photos. Looks like it might work but requires removing the tank, which I normally don’t do.

Your tank adapter and fill adapter look different from whats on my Condor and listed as available from AirForce.

I’d still prefer to…Read more

I’ve already rotated the bottle 45 deg. so that the…Read more

Tuko

Would a clam like that work with the tank still installed? Think I’ll give that a try later today.

It would be better if we could drain the tank without removing it.

Tuko

they dont put it in the disconnect,

they mean to put a coin in the fill adapter that is for airforce guns “without” the spinlock tank.

when you have a spinlock tank the fill adapter wont work and isnt needed.

i have a spinlock tank,so i wouldnt have been able to use the coin trick.

Thanks

That’s what I was…Read more

I’m missing something here!!

Tuko

The pre-Spin-Lock tanks could be emptied by putting a spacer in front of the valve and screwing the tank back in. I don’t know if that will work with the Spin-Locks.

Someone should build us a tool to…Read more

http://bsaguns.co.uk/scopes_settingup.php

In a typical scope setup, where center-line alignment is ignored, the scope elevation turret offsets the erector tube to compensate. You’ll…Read more

On my Condor, the scope sits three inches above the bore. I use a shim under the scope rear mount. That tilts the scope down in front so that the scope center-line intersects the bore center-line near the zero point. That results in the elevation turret being near it’s center of adjustment when zeroed. That’s a…Read more

I’m thinking that we need to go back to a more natural existence where the crazy, ignorant, and lazy get eaten by predictors and don’t reproduce.

Tuko

$$$!! I’m loosing interest fast! The white stuff meets my needs.

Thanks
Tuko

I’m remembering that they are manufactured in Ft. Worth, Tx. Give them a call. You may get a chance to see them all up real close.

Tuko

From that discussion, there may be a corrosion problem unless there is an additive to prevent it.

They are also expressing concern that once applied, it’s difficult to remove. That could be good or bad.

Near the end, there is a recommendation for Krytox® 2Cx Grease.

I modified my Condor with the Talon Tunes Quick Change Top Hat so that I could tune it down with the the restrictors. Go to the top of the page and click on the icon. At Talon Tunes search…Read more

I just checked my tube of Permatex dielectric grease and, sure enough, 100% Silicone. But also, the tube has a caution that it’s an eye and skin irritant.

Looks like I had air gun O-ring lub on hand and didn’t know it.

Thanks to bogman and everyone also.

Looks like this Silicone Lubricant really gets around under a lot of…Read more

Thanks guys.

Tuko

Except, I had the owner of a SCUBA store demonstrate to me that when Scuba Tanks are filled from air storage tanks of even higher pressure, the SCUBA tank gets hot? Hot enough that one will not hold a hand on…Read more

I’ve been shooting break barrel and pump up air guns for longer than I can remember. I always disliked the dieseling. It left carbon in the barrel which resulted in wear and needed cleaning to maintain accuracy. For the past few years, I’ve been shooing CO2 power air guns. No dieseling. Use any oil I wanted, The…Read more

Why’s that?? 😀 😀

I had the ‘Infidel’ handle on another forum. It got me in trouble. Some people just don’t have a sense of humor.

Tuko

I’ve ordered Talon Tunes ‘Quick Change Top Hat’.

Will I still need the ‘O’ ring?

Tuko

Now, who did that the first time. I would never have tried something like that. Kind of like the first guy to eat an oyster. Who would have thunk??

Is there risk of damaging the stem or gun if the stem is removed more than a few times?

The ‘O’ ring in the video looks thicker than I was lead to believe.…Read more