Talonairgun | unclejack | Activity https://talonairgunforum.com/members/unclejack/activity/ Activity feed for unclejack. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 adc32c59cd81e2e61e5d66d0334f8a82 unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/page/3/#post-179568 Wed, 11 Sep 2013 18:07:06 -0400 1. Shroud extension
I added the below shroud extension to this Bullpup, to eliminate noise.

See more below my old post:
http://www.talonairgun.com/forum/viewtopic.php?f=18&t=24566

2. Safety and trigger-link
Unlike wood stock bullpups, all chassis type bullpup are similar, no trigge-link troubles as well as
no safety troubles, by shifting or…Read more

]]> de5330168efcc71b7dcb3d42a4f5d561 unclejack replied to the topic Aftermarket Bullpup kit $550 - Lefty Madrid in the forum Other BullPups https://talonairgun.com/forums/topic/aftermarket-bullpup-kit-550-lefty-madrid/page/3/#post-167999 Thu, 28 Feb 2013 05:49:21 -0400 Lefthymadrid updated the latest news page as below:

AFTER RECOVERY, (HEALTH ISSUES)…, I WILL ONLY OFFER THE MR1 FOR THE M-ROD. IN BATCHES OF 10 (ALREADY MADE UNITS). SO WAITING TIME WILL ONLY BE FOR THE ACTUAL SHIPPING PERIOD. I DEEEPLY APOLIGIZE FOR THE DELAYS, AND INTEND TO GET THIS DONE, IF THIS HEART OF MINE PERMITS!…Read more

]]> b05ff6f1e2ad91a3e94a3b5a839d8292 unclejack replied to the topic Marauder Tactical Bullpup stock - Lite (Stealth Nighthawk) in the forum Other BullPups https://talonairgun.com/forums/topic/marauder-tactical-bullpup-stock-lite-stealth-nighthawk/#post-164585 Mon, 31 Dec 2012 23:54:16 -0400 Remade forearm cover to accept most weaver accessories:

]]> f3527829f57db4a2afac39c2120e6b73 unclejack replied to the topic Marauder Tactical Bullpup stock - RIS (Phoenix Firehawk) in the forum Other BullPups https://talonairgun.com/forums/topic/marauder-tactical-bullpup-stock-ris-phoenix-firehawk/#post-164504 Sun, 30 Dec 2012 17:30:30 -0400 Just finished Desert Tan version;


]]> 7188e7096b38b191a723052daac392ae unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/page/2/#post-164484 Sun, 30 Dec 2012 04:20:15 -0400 quote gringoloco38:One more time, tos for tour time!

That’s the answer i’m Looking for. Now i just see a lot of adapting work in my future!!!
😆

I thought you have the same/similar ideas of my hunting group.
The concept of mid balance stocks (bullpup) is low material cost and shot work time to distribute to my hunting group. The material…Read more

]]> ffe8f492441ddca47f023553683cfaeb unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/page/2/#post-164460 Sat, 29 Dec 2012 18:25:22 -0400 These bullpup stocks were the candidates when I started making bullpup mods.
But, these airsoft stocks have some major concerns for work time or physical concerns; FAMAS has thin plastic walls; F2000 has structural concern for mod (more work time); Bikal was already discontinued and very hard to get; CX4 does not have pressure gauge space……Read more

]]> 5b41ca866c89db51c45db6d2ccf36e5b unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/page/2/#post-164431 Sat, 29 Dec 2012 00:57:15 -0400 quote gringoloco38:Thanks anyway, perhaps knowing butts measures that are in your signature, some serve for the model I have

Happy New Year!

Butt covers are made to meet most popular tactical butt pads (see below sketch):

Happy New Year too!

]]> 74dd911207634748645a639a2aee6841 unclejack replied to the topic Marauder Tactical Bullpup stock - Lite (Stealth Nighthawk) in the forum Other BullPups https://talonairgun.com/forums/topic/marauder-tactical-bullpup-stock-lite-stealth-nighthawk/#post-164426 Fri, 28 Dec 2012 23:46:32 -0400 Just finished Desert Tan version.


]]> 8b44387e23ff78a43050a5b1032aa217 unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/page/2/#post-164420 Fri, 28 Dec 2012 18:36:21 -0400 quote gringoloco38:Hey Uncle, can you try on a Marauder Pistol?

I do this for my mod:



None of my hunting group has pistol type PCP. No plan to make for pistol models.

]]> 09441b5978952ba05b80b713cfd46321 unclejack replied to the topic Marauder Tactical Bullpup - EZ in the forum Other BullPups https://talonairgun.com/forums/topic/marauder-tactical-bullpup-ez/#post-164346 Thu, 27 Dec 2012 00:18:44 -0400 quote illwill:AWESOME!!!!!

Love to see these updates on your work. Keep ’em coming….

Thanks, the aluminium receiver chassis type bullpup project is almost done, the purpose was provide bullpup stocks to all my hunting group guys.

]]> 637a5b6f4736fb358de68fe42789a81a unclejack replied to the topic Marauder pistol bullpup in the forum Other BullPups https://talonairgun.com/forums/topic/marauder-pistol-bullpup/#post-163989 Wed, 19 Dec 2012 00:55:41 -0400 Thank you for sharing nice photos.

]]> 635bb3835eff0f2950cf8a5c6129b4c4 unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/page/2/#post-163949 Tue, 18 Dec 2012 04:40:42 -0400 Completed butt cover type S2 (with 6-position stock butt pad) for my hunting group guy’s choices.

]]> 10eae5344dca2c6f25d7ba8a91275b62 unclejack replied to the topic Marauder Tactical Bullpup stock - RIS (Phoenix Firehawk) in the forum Other BullPups https://talonairgun.com/forums/topic/marauder-tactical-bullpup-stock-ris-phoenix-firehawk/#post-163934 Mon, 17 Dec 2012 17:43:11 -0400 Thanks
The receiver chassis is part of gun body for steady shooting. It is very easy cleaning care and maintenance too, just open the butt cover. My purpose is hunting, so wood stock bullpup does not work for wet and sand dust days because of hard to clean up without washing.

]]> 13c948c573aefebd93245a5c22341bad unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/page/2/#post-163761 Fri, 14 Dec 2012 01:47:14 -0400 Just finished frame work of Lite version.

]]> 02bd2950b468d3f282948f59144f1ecf unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/#post-163572 Mon, 10 Dec 2012 03:06:11 -0400 DIY будет делать это самостоятельно.
Не для продажи.

DIY on tehdä se itse.
ole myytävänä.

]]> 7a35eeec4403a0e90e8f0fbb4d4469b9 unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/#post-163562 Mon, 10 Dec 2012 00:26:25 -0400 The material cost is below:
I used the junk of airsoft for AR15 grips and Stock Butt pads when I started AUG bullpup mod, my hunting group leader purchased large box of airsoft junk from dealer.
I picked from the junk box, he charged $10 for grip and butt pad.
Rails were purchased at Walmart (see below) RIS is $24.18, single rail is $5 – $9…Read more

]]> e3df487a2a9372cd9d0563ec9ea475f9 unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/#post-163532 Sun, 09 Dec 2012 07:52:10 -0400 – Mounting reference (before finishing surface) –
Butt cover (type S1)

Marauder mounting (before finishing surface)

I also added the following non-rotating butt version to reduce my work time as per suggestion of my hunting group. I will start making after finished Lite version.

]]> b2234574a18427ff3f33051165a1d888 unclejack replied to the topic Hatsan AT44 (Pneuma) Bullpup - RIS (Firehawk) in the forum Other BullPups https://talonairgun.com/forums/topic/hatsan-at44-pneuma-bullpup-ris-firehawk/#post-162953 Wed, 28 Nov 2012 17:12:29 -0400 I do not have any dimensional information about AA, and I am tied up chasing rabbits on snow field in this winter. Fun to shoot rabbits !

]]> add4e17708f99f682447193bd77d79a7 unclejack replied to the topic Hatsan PCP rifles? in the forum Other Guns https://talonairgun.com/forums/topic/hatsan-pcp-rifles/#post-162927 Tue, 27 Nov 2012 19:04:19 -0400 Due to the nature of ecomony models, like Hatsan PCPs (BT65 and AT44), internal mechnical parts are made rough, from trigger to hammer. I always disassemble and make smooth finish, specially casted hammer area has to be smooth, in order to eliminate irregular shots. (Somethimes, you will notice irregular orbit shot due to rough finish.) Otherwise,…Read more

]]> f33958816e18fa5bd36574e4fde7bd1c unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/#post-162593 Wed, 21 Nov 2012 22:26:01 -0400 Added the following single-rail (Lite) version as per request of my hunting group guys. Quad-rail version is about 3.5lbs (includes RIS and everything), single-rail version is about 2.9 to 3.0lbs. Hope I can finish the first backlog before Xmas.

]]> ae469da437d915096d691b40520358b7 unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/#post-162468 Sun, 18 Nov 2012 06:43:18 -0400 Safety
This safety is AR15/M16 modified thumb down type.
Safety is the most mechanically stressed part due to frequent usages on bullpup mod, construction was done by brass and steel (includes a tiny bearing ball for latching, attached mount, and round plate has small dents for catching a tiny bearing ball.)

]]> ee78a7f3bbf5460494f8f75606eee4ae unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/#post-162385 Fri, 16 Nov 2012 00:04:01 -0400 As Indicated above, the photos are before finishing surface.
It has been hard to get used Steyr AUG stocks per my hunting group guys.

Then, I started working on this type Bullpup stocks for most reservoir type PCPs, the design concept is similar to below companys’ bullpups and the taste of my hunting group.…Read more

]]> 0f43ff17b84f5bae154d9c3eceab6bc3 unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/#post-162334 Thu, 15 Nov 2012 05:47:58 -0400 – Mounting reference (before finishing surface) –
Butt cover (type SS)

AT44 mounting (before finishing surface)

Finishing
Painting is the most common finishing, easy and popular method might be “Self etching primer” and Acrylic paint coating, by easy, low cost, and strength. (see below Youtube)

Or mor…Read more

]]> 7bfaad85888b2483bd97f4f9fab92310 unclejack replied to the topic Tactical Bullpup stock - DIY Project in the forum Other BullPups https://talonairgun.com/forums/topic/tactical-bullpup-stock-diy-project/#post-162305 Wed, 14 Nov 2012 09:55:47 -0400 – Reference –
Reciever chasis (w/ and w/o gauge type models)

Receiver chassis side view

New Trigger (adjustable)


Clip-on Cheek-rest

]]> 5ecdc69e85dbcf93f03a5d2e59ba8a84 unclejack replied to the topic thought I would post this here for us bullpup guys! in the forum Other BullPups https://talonairgun.com/forums/topic/thought-i-would-post-this-here-for-us-bullpup-guys/#post-160878 Mon, 08 Oct 2012 03:47:46 -0400 I first learned bullpup from a very successful small company, named Center Balanced Systems (only makes for real guns but not for airguns) with lower cost and always has full of backorders. The http://www.cbrps.com/Cost.html

]]> d29565b8e16feea9d0de332e0484c091 unclejack replied to the topic BSA Lonestar Bullpup in the forum Other BullPups https://talonairgun.com/forums/topic/bsa-lonestar-bullpup/#post-159530 Sat, 01 Sep 2012 05:50:38 -0400 quote koljo:quote Ed:I am afraid I have patent EDgun Matador shape 🙂 As people in Russia say “Whatever bullpup you make — you will have EDgun at the end!” 🙂

Correction: “Whatever bullpup you make — you will have an EDgun STOCK at the end” 🙂

Yes, I must admit the EDgun stock is EXTREMELY well thought out — very comfortable and…Read more

]]> 2c9e268e0f4c73920fc98a44ac86a973 unclejack replied to the topic BSA Lonestar Bullpup in the forum Other BullPups https://talonairgun.com/forums/topic/bsa-lonestar-bullpup/#post-159527 Fri, 31 Aug 2012 21:07:30 -0400 quote koljo:[/url][/img]

My pride and joy: a John Bowkett tuned and regulated .25 cal BSA Lonestar – absolutely dead nuts accurate, extremely reliable and easy to work on.

54 fpe of sheer hunting power and not pellet fussy – shoots equally well JSB Kings and Baracudas for greater hitting power.

With the Weihrauch shroud is very quiet and only…Read more

]]> a3d338a1b2a19ae8b0acf9715320a02d unclejack replied to the topic Carbon Double Tube Shroud in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/carbon-double-tube-shroud/#post-158825 Wed, 08 Aug 2012 19:17:09 -0400 I do not think a thick-wall carbon tube would accomplish the same effect. I think layers of carbonfiber, aluminum and air layer between the two create this additional moderation. Because I made steel tube and aluminum double tubing before, and I notice some noise reduction.

]]> 14f02547aabb7c273d2bda289f073ab9 unclejack replied to the topic Carbon Double Tube Shroud in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/carbon-double-tube-shroud/#post-158811 Wed, 08 Aug 2012 04:55:11 -0400 ID is 28mm and 29mm.

]]> 2ebf1e7d0ca79466fd37620811d838b6 unclejack replied to the topic Carbon Fiber Tube Shroud in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/carbon-fiber-tube-shroud/page/2/#post-158411 Mon, 23 Jul 2012 01:29:17 -0400 I found very detail works of carbon shroud below site;


http://www.airrifle.co.za/showthread.php?t=17004

]]> 961db48e9c795bf330700688a0af09c5 unclejack replied to the topic Hatsan AT44 bullpup internal cocking conversion (AUG Air) in the forum Other Guns https://talonairgun.com/forums/topic/hatsan-at44-bullpup-internal-cocking-conversion-aug-air/#post-154605 Tue, 01 May 2012 23:28:46 -0400 Below is how to put back the trigger ass’y:

]]> 6928481d7f7ccbc505464927db28d770 unclejack replied to the topic Hatsan AT44 bullpup internal cocking conversion (AUG Air) in the forum Other Guns https://talonairgun.com/forums/topic/hatsan-at44-bullpup-internal-cocking-conversion-aug-air/#post-154161 Wed, 25 Apr 2012 21:26:47 -0400 quote luv4pits:Dang that’s to cool. Great work.
Just a bit above my level for now. 😆

I am not pro, just like you. lol !
Just take your time and hands to make it 1-by-1, one step by one step.
If you try to make it in short time, you may encounter problems and may destroy it.

]]> abb443c9341278f4e63aecfcc42c18a2 unclejack replied to the topic Hatsan AT44 bullpup internal cocking conversion (AUG Air) in the forum Other Guns https://talonairgun.com/forums/topic/hatsan-at44-bullpup-internal-cocking-conversion-aug-air/#post-154160 Wed, 25 Apr 2012 21:23:27 -0400 quote gy954:Wow! That’s a whole lot of effort, but the result speaks for itself. Nice work. What is the brass (?) piece that attaches to the OEM trigger? Is that yet another thing you fabbed, or some off-the-shelf gizmo?

Congratulations on real craftsmanship.

Again, I made the trigger adapter to the original trigger to catch the trigger arm by…Read more

]]> 81994d1595d872301679e083d87cca97 unclejack replied to the topic Hatsan AT44 bullpup internal cocking conversion (AUG Air) in the forum Other Guns https://talonairgun.com/forums/topic/hatsan-at44-bullpup-internal-cocking-conversion-aug-air/#post-154153 Wed, 25 Apr 2012 17:52:48 -0400 Thanks for opening of Hatsan USA.
Umarex USA seems to make the efforts to clear the inventory of HAtsan OEM models, such as Hämmerli Pneuma series. Now under $300 for PCP reapeater. It may be a good time to get Hatsan AT44.

]]> 3d143ad445e9e8bf2549b9e149c78b1b unclejack replied to the topic Hatsan AT44 bullpup internal cocking conversion (AUG Air) in the forum Other Guns https://talonairgun.com/forums/topic/hatsan-at44-bullpup-internal-cocking-conversion-aug-air/#post-154151 Wed, 25 Apr 2012 17:32:24 -0400 quote gy954:Wow! That’s a whole lot of effort, but the result speaks for itself. Nice work. What is the brass (?) piece that attaches to the OEM trigger? Is that yet another thing you fabbed, or some off-the-shelf gizmo?

Congratulations on real craftsmanship.

As indicated, that one is “Trigger adapter may be required to secure…Read more

]]> 4ce132a7ad92780b4e7b3d2796de4e51 unclejack replied to the topic Hatsan BT65 diagram (2011 models)- PDF in the forum Other Guns https://talonairgun.com/forums/topic/hatsan-bt65-diagram-2011-models-pdf/#post-153713 Sun, 15 Apr 2012 19:56:02 -0400 quote get the blue jay:hay unclejack… any info on that BT65 bullpup???

were did you find that pic at, looks like it came from their sight, but I cant find anything on it…

As indciated the bullpup is direct quote from hobisilar.com that forum only join the member’s recommendation. You may use translation programs.

]]> f535bfa960decac23f8abeb4558695f7 unclejack replied to the topic Marauder Bullpup cocking conversion in the forum Other Guns https://talonairgun.com/forums/topic/marauder-bullpup-cocking-conversion/#post-152785 Thu, 29 Mar 2012 04:34:53 -0400 Tahnks, best of all – Fun to shoot !

]]> 72a8ac6c8f677667e9facfa83309d7ba unclejack replied to the topic Hammerli Pneuma Elite10 (Hatsan AT44) - only $290.57 in the forum Other Guns https://talonairgun.com/forums/topic/hammerli-pneuma-elite10-hatsan-at44-only-290-57/#post-152610 Sun, 25 Mar 2012 17:47:29 -0400 Hatsan-USA started offering the $10 cash-back coupon to USA sellers.


http://www.american-armscorp.com/air-rifles/hatsan-pcp/

]]> c5398902ca937a0abb8d944cc0018fa0 unclejack replied to the topic Marauder Bullpup cocking conversion in the forum Other Guns https://talonairgun.com/forums/topic/marauder-bullpup-cocking-conversion/#post-152317 Wed, 21 Mar 2012 09:33:01 -0400 I have changed the cocking link to internal link, replacing 3pcs-hammer as below;


Internal Cocking-link Version


Key : Cocking shaft must move the same way as pellet loading shaft.



Hammer#1 is the hammer base to accept the original striker screw, set screw, and binding screw. (It has small flat area to keep grease for long term operation,…Read more

]]> a988e38040d10f607228aa6e5a6a6209 unclejack replied to the topic Carbon Fiber Tube Shroud in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/carbon-fiber-tube-shroud/#post-152316 Wed, 21 Mar 2012 06:18:07 -0400 quote synopsys:These guys have some things cheaper than RockWest…

http://www.carbonfibertubeshop.com//index2.html

RockWest is selling per 11.75″, 12″ or 21″ length unit. However, Cargon Fiber Tube Shop is selling per 6 inches, the cost per one (1) inch seems to be lots higher than RockWest… Thaks anyway…

]]> 0ba4be62d6fd390b81865d1ae7733b70 unclejack replied to the topic Production of EDguns in USA in the forum EdGun https://talonairgun.com/forums/topic/production-of-edguns-in-usa/#post-152266 Tue, 20 Mar 2012 10:29:41 -0400 quote pablouk:
I just touched the business culture gaps between East Europe (manufacturers) and USA. I understand you want to correct that UK does not belong to East Europe, and US domestic manufacturers are not from East Europe. The past bitter facts of East Europe companies do not change, but may change in the future.

]]> e5c7228c9b5a516f0536ed1143feb3d7 unclejack replied to the topic Production of EDguns in USA in the forum EdGun https://talonairgun.com/forums/topic/production-of-edguns-in-usa/#post-152241 Mon, 19 Mar 2012 17:40:55 -0400 Dealing with the US liability law, tort law, and consumer protection laws (risk management) seem to be hard to do business in the US, especially for East European manufacturers. I may use the words “business culture gaps”. Due to the absolute fear of the liabilities in the U.S. consumer marketplace, some of parties/individuals are int…Read more

]]> 0a6f902db3beccdcb5a1451e2a0d470b unclejack replied to the topic anyone getting one of these Hatsan pcp's?? in the forum Other Guns https://talonairgun.com/forums/topic/anyone-getting-one-of-these-hatsan-pcp-s/#post-152222 Mon, 19 Mar 2012 07:42:56 -0400 I forgot to mention one thing. He also changed to Lothar-Walther barrel.
http://www.lothar-walther.com/

]]> 510d3242d8238277ddb28c34a5ea074a unclejack replied to the topic anyone getting one of these Hatsan pcp's?? in the forum Other Guns https://talonairgun.com/forums/topic/anyone-getting-one-of-these-hatsan-pcp-s/#post-152221 Mon, 19 Mar 2012 07:15:47 -0400 As you might know, Hatsan just opened USA office for only airgun sector (not handling shotguns), to expand the North America business.

Home


The AT44 model is the leading PCP model of Hatsan, Hatsan supplies as OEM (includes semi-assembled/licenced prarts) to several worldly known airgun makers.
AT44 was known as cheaply made…Read more

]]> bfedeff30a0ba8bfd730db18d5ffbfa0 unclejack replied to the topic BSA won 100m precision shooting, again ! (3-11-12) in the forum BullPup General Chat https://talonairgun.com/forums/topic/bsa-won-100m-precision-shooting-again-3-11-12/#post-152117 Sat, 17 Mar 2012 16:20:45 -0400 Kazz, I hope you will be back the 1st place at next contest.

Sorry, the chart seemed to be updted.

]]> 40fcc3ba797b933a001ec4235604a9da unclejack replied to the topic Marauder Bullpup cocking conversion in the forum Other Guns https://talonairgun.com/forums/topic/marauder-bullpup-cocking-conversion/#post-151830 Sun, 11 Mar 2012 03:37:48 -0400 quote 80 GRIT:That is Bad to the BONE!!! 😎

Thanks, I am currently working on my hunting member’s BSA Scorpion and Air Arms rear-end bolt-action S41/51 models.

]]> 61ff2218aebad0c1516b80e0016e9db4 unclejack replied to the topic Marauder Bullpup cocking conversion in the forum Other Guns https://talonairgun.com/forums/topic/marauder-bullpup-cocking-conversion/#post-151829 Sun, 11 Mar 2012 03:36:28 -0400 quote Hoot:Noted: the baffles on the Sparrow 22 appear incredibly thin. Is there a purpose there, or simply material available?

Different baffle types display was interesting and informative. Odd how some of those designs are so effective, while others are near useless.

Regards,

Uncle H 😯 😯 T

It’s interesting in different n…Read more

]]> 6b98f468980b5c3fda100c502ee8ec98 unclejack replied to the topic Marauder Bullpup cocking conversion in the forum Other Guns https://talonairgun.com/forums/topic/marauder-bullpup-cocking-conversion/#post-151564 Tue, 06 Mar 2012 04:22:53 -0400 I also modified the inside of shroud, to improve the noise performance, I made the internal sound structure, modifying from Sparrow22 for .22cal 27 x 129mm (sound reduction: 41dB by Mfr).

The noise reduction is extremely good at 74dB.
The below is the typical noise reduction designs; Type A is same as Marauder shroud; Type B is ACC Titan…Read more

]]> 6ac91ca0680f55c81febdda12747bd01 unclejack replied to the topic Daystate Reflex shroud in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/daystate-reflex-shroud/#post-151444 Sun, 04 Mar 2012 05:49:32 -0400 I copied and made the new Sparrow. The noise level became 69dB.
The new Sparow design looks like the most effective design in my experience.


]]> 3a8a0ffbea7fd13e7e7a3f1c195ac265 unclejack replied to the topic Air Arms S510 FAC carbine vs BSA R10??? Which is the... in the forum Other Guns https://talonairgun.com/forums/topic/air-arms-s510-fac-carbine-vs-bsa-r10-which-is-the/#post-151336 Fri, 02 Mar 2012 21:29:38 -0400 BSA barrel is traditionally known as higher accuracy, but BSA’s breech and trigger area is remain old fashion. In fact, BSA is changing MMC cocking to rear-end bolt action cocking.
On the other hand, Air Arms has the advanced breech and trigger; in addition, Air Arms is changing rear-end bolt-action to side lever-action for easy cocking (less…Read more

]]>