Talonairgun | veerkracht | Activity https://talonairgunforum.com/members/veerkracht/activity/ Activity feed for veerkracht. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 0c844ae26d63c7743ff0d06f1b9e3eb8 veerkracht replied to the topic Long range crow hunting at 150m/164y by edgun matador long .22 in the forum EdGun https://talonairgun.com/forums/topic/long-range-crow-hunting-at-150m-164y-by-edgun-matador-long-22/#post-274097 Mon, 29 Jan 2018 16:21:00 -0400 Impresive!
I quess his friend learned something that day.
:smilen:

]]> 6560286a33231ce44b479b0b3b03e26b veerkracht replied to the topic R3 rear tube plug screw size...?? in the forum EdGun https://talonairgun.com/forums/topic/r3-rear-tube-plug-screw-size/#post-274056 Sat, 27 Jan 2018 18:05:46 -0400 M3X8

]]> 18cdb319af3470efa1f7e891edfe103c veerkracht replied to the topic R5 dangerous failure in the forum EdGun https://talonairgun.com/forums/topic/r5-dangerous-failure/#post-273966 Tue, 23 Jan 2018 09:55:05 -0400 quote nefarion:Weak tightening causes damage and too tight tightening also. So what is the force to tighten this screw? simple answer …
Weak tightening only causes leaking air at the probe?
What other damage will there be?

Regards, Robert.

]]> 6c7cd6901bedb72b549d0935311459a3 veerkracht replied to the topic My Matador R5 just landed... in the forum EdGun https://talonairgun.com/forums/topic/my-matador-r5-just-landed/page/9/#post-273939 Sun, 21 Jan 2018 12:09:18 -0400 Piotr,
Have you tried the edgun regalator at 125 bar?
Regards, Robert.

]]> d5e06cf6ef1ed374c7320af2012b21d6 veerkracht replied to the topic Edgun R5 .30 in the forum EdGun https://talonairgun.com/forums/topic/edgun-r5-30/page/6/#post-273697 Fri, 05 Jan 2018 08:18:51 -0400 Shooter,

I’ve been there.
The link gives me 3 options and only the Russian option is working.
This is with MY computer.
Maybe yours is able to open the English version, if so, could you post the pdf file please?

Thanks

Regards, Robert.

]]> ebbfb59fbc044216cc86174b4c31a42a veerkracht replied to the topic Edgun R5 .30 in the forum EdGun https://talonairgun.com/forums/topic/edgun-r5-30/page/5/#post-273680 Thu, 04 Jan 2018 16:04:02 -0400 Eduard,

Is there an english manual for the R5 .30 avialable?
Is it correct that the air tube of the standart R5 contains 320 CM3?

Thanks!

Regards, Robert.

]]> 3513581b56b352fba61f37f8f5e142a5 veerkracht replied to the topic My Matador R5 just landed... in the forum EdGun https://talonairgun.com/forums/topic/my-matador-r5-just-landed/page/7/#post-273647 Wed, 03 Jan 2018 12:56:17 -0400 quote shooter3:I think you should replace a barrel if you want to touch some real accuracy.

Shooter,

Do you have experience with the .30 Cal barrel of the R5?

Regards, Robert.

]]> 69b8967a86156d68c0c26f8d947f20d1 veerkracht replied to the topic My Matador R5 just landed... in the forum EdGun https://talonairgun.com/forums/topic/my-matador-r5-just-landed/page/6/#post-273513 Sun, 24 Dec 2017 10:41:22 -0400 Eduard,
How much moa drop is there on the scope rail?
Regarfs, Robert.

]]> ecc193d4564be93bf7972a8a3feafd62 veerkracht replied to the topic My Matador R5 just landed... in the forum EdGun https://talonairgun.com/forums/topic/my-matador-r5-just-landed/page/4/#post-273174 Fri, 08 Dec 2017 07:18:56 -0400 Piter,

I enjoy reading about your findings and pics.
It is one of the reasons I really looking forward of having my own R5.
The gun is simple, solid and accurate.
Again, Ed did some revolutionairy work in the bullpub scene!

Keep us posted!

Regards, Robert.

]]> 2a5ac1539b25b3f9a169d737dd23a661 veerkracht replied to the topic My Matador R5 just landed... in the forum EdGun https://talonairgun.com/forums/topic/my-matador-r5-just-landed/page/3/#post-273133 Thu, 07 Dec 2017 09:35:04 -0400 Piter,

I asume you did not select the pelets.
With that in the back of my mind, the results are not bad.
The top shooters in the 100meter competition in my country AL select their pelets.
The weight diference can be severe.
Try differend batches of differend years if possible.
If you want match grade results you have to have match grade…Read more

]]> 921029f1b901e8d67ccfdc6a8e9565cd veerkracht replied to the topic NSA .22 SLUGS in the forum EdGun https://talonairgun.com/forums/topic/nsa-22-slugs/#post-272967 Sat, 02 Dec 2017 07:38:41 -0400 I would never shoot slugs through a choked barrel.
Regards, Robert

]]> 743c2685d01e3320bf0e6fc02e180bda veerkracht replied to the topic Edgun R5 .30 in the forum EdGun https://talonairgun.com/forums/topic/edgun-r5-30/page/3/#post-272691 Tue, 21 Nov 2017 17:25:21 -0400 quote Ed:quote Veerkracht:Ed,

What can we expect on accuranty of the LW .30 barrels?

Regards, Robert.

For the first time shooting not bad, the gun shows potential.
Did you use selected pellets or did you shoot just out of the tin?
Perhaps you already told it, but Russian is not really my native language.
:winkn:

Regards, Robert.

]]> 2f6c9a5fc4ed1edb8407dbed8e1cd02e veerkracht replied to the topic Edgun R5 .30 in the forum EdGun https://talonairgun.com/forums/topic/edgun-r5-30/page/3/#post-272681 Tue, 21 Nov 2017 07:27:54 -0400 Ed,

What can we expect on accuranty of the LW .30 barrels?

Regards, Robert.

]]> 801115b0d99190cb69d02e1412ed59fb veerkracht replied to the topic Edgun R5 .30 in the forum EdGun https://talonairgun.com/forums/topic/edgun-r5-30/page/2/#post-272504 Wed, 15 Nov 2017 19:37:57 -0400 Ed,

Thanks for your reply!
Still got some left:
As I understand there will be an single shot bold action and an side lever multishot version?
Is it possible to adjust the hst without removing the stock?
Max filling up to 300 bar?

Thanks!

Regards, Robert.

]]> eae9748d2daee1c9ddafdf9df3c77e22 veerkracht replied to the topic Edgun R5 .30 in the forum EdGun https://talonairgun.com/forums/topic/edgun-r5-30/page/2/#post-272494 Wed, 15 Nov 2017 10:36:02 -0400 Wow Eduard!
That looks great!
Lots of improvements, a totaly different gun.
Is it possible to shoot below reg pressure without damage?

Regards, Robert.

]]> b7b9625c744cd54d1a609b1d6c448e0a veerkracht replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/3/#post-271078 Mon, 04 Sep 2017 14:35:02 -0400 quote rkave:Excellent… I am really interested in this. I think a .22 cal 34 grain or larger at 950 fps will be fenomenal for hunting.

Take a look at this pellets:
https://www.krale-schietsport.nl/en/airgun-pellets-rws-5-7-mm-41-5-grain.html

I have seen videos that say their BC is 0.19 …. If true, it’s a significant advantage over…Read more

]]> 8a1a3400612c1adbc4baab09db6f4fb4 veerkracht replied to the topic Huben K1 mod in the forum Other BullPups https://talonairgun.com/forums/topic/huben-k1-mod/#post-267736 Fri, 24 Mar 2017 07:40:13 -0400 An .223 barrel gives a little better performance,
but its diameter is bigger than the magazine diameter.
So real .223 amo won’t fit in the magazine, you will have to size it,
and then it will be a little to small for the barrel it selve.
So, unfortunately, the 41 grains rws are to long and thick for it.
I ended up shooting 16 grains jsb at 300m/s.

]]> 8e743de96e902a4caf00892f15ad6466 veerkracht replied to the topic Huben K1 mod in the forum Other BullPups https://talonairgun.com/forums/topic/huben-k1-mod/#post-267735 Fri, 24 Mar 2017 07:33:30 -0400 The new rod is made from galvanized steel (hydraulic) tubing, 6mm outer and 3 mm inner diameter.
But this is not that important, as long as it is just thicker.
I (soft) welded the 3mm threads in to it.
6 mm is a little to thick at some places, you’ll have to reduce it some.
It toke me some time bending and shaping it,
I wanted it to move…Read more

]]> 2853e1db5489c0068cc87d2746a68cd1 veerkracht replied to the topic Huben K1 mod in the forum Other BullPups https://talonairgun.com/forums/topic/huben-k1-mod/#post-267686 Thu, 23 Mar 2017 08:32:28 -0400 Hi Wesley,

Jep, you are correct.
I relocated the pivot, drilled a 2,5mm hole +- 5 mm higher.
It makes the turning point of the trigger closer to the trigger rod,
resulting in a larger stroke.
Do not dril it more upwards, the trigger material will be to thin.
I made the rear lever longer, also resulting in a larger stroke.
I glued a small piece of…Read more

]]> 1226f725d187d295422b32d172cf6904 veerkracht replied to the topic Huben K1 mod in the forum Other BullPups https://talonairgun.com/forums/topic/huben-k1-mod/#post-266887 Sat, 04 Mar 2017 07:08:40 -0400 The trigger rod was still a bit flexibel, so I made a thicker one.

Total resulting in a light operable and predictable trigger.

Regards, Robert.

]]> 993e44602ef127b51d4775c66668f376 veerkracht replied to the topic Let's talk a little bit about ST barrels in the forum BullPup General Chat https://talonairgun.com/forums/topic/let-s-talk-a-little-bit-about-st-barrels/page/5/#post-260105 Fri, 21 Oct 2016 07:22:39 -0400 The results of the match last weekend:

The Pellet section:

The cast bullit section:

Regards, Robert.

Edit: Had some bucket isue’s..

]]> 50b777ef13fc78ff13342f4a157dc123 veerkracht replied to the topic Let's talk a little bit about ST barrels in the forum BullPup General Chat https://talonairgun.com/forums/topic/let-s-talk-a-little-bit-about-st-barrels/page/5/#post-260068 Thu, 20 Oct 2016 08:06:57 -0400 quote keyser soze:What I have a hard time reconciling is when I look at 100 meter matches around the world I do not see as many FX guns in the winner’s column like seen at the AoA EBR. I wonder why?

This is in my country.
One has to know the background of this list.
Due to differences in opinions the 100 meter competition has been separated in…Read more

]]> ac32bb9dd8542486d9fd85951622e684 veerkracht replied to the topic What scope do you have on your Edgun? in the forum EdGun https://talonairgun.com/forums/topic/what-scope-do-you-have-on-your-edgun/#post-258343 Thu, 08 Sep 2016 08:36:24 -0400 Bns,

On my .22 R3 std: hawke sport hd 3-9×40 mil dot
It does what it is supposed to do.
I do not care about money, size or beauty.

For 100 m. match:
Tasco world class plus 36×50
great value.

Regards, Robert.

]]> a7066b9dfbc6862f67819e466e5d2f8d veerkracht replied to the topic Custom .30 cal Bullpup in the forum BullPup General Chat https://talonairgun.com/forums/topic/custom-30-cal-bullpup/page/2/#post-258295 Tue, 06 Sep 2016 19:04:20 -0400 Birdman,
Sorry to hear that, take care.
Regards, robert.

]]> b7dfeb7feaefa6af9aa67f016c69c2c4 veerkracht replied to the topic Custom .30 cal Bullpup in the forum BullPup General Chat https://talonairgun.com/forums/topic/custom-30-cal-bullpup/page/2/#post-258268 Mon, 05 Sep 2016 19:11:31 -0400 Bm,
What kind of barrel wil be used in the. 22?
Ammo should be rws 41 grns.

]]> c90f1dce035af7a028958f65713fe55e veerkracht replied to the topic Broken part on my matador in the forum EdGun https://talonairgun.com/forums/topic/broken-part-on-my-matador/page/3/#post-256241 Fri, 15 Jul 2016 06:36:15 -0400 quote Urgirlinmyjetta:Ok so I replaced all the washers on my regulator and I’m still leaking air out the little hole on the bottom of the air tube…any way to stop this leak?….a lot of lube?…bigger oring?…..it’s leaking about 1 line on the gauge a day.
Leaking air out of the little hole in the air tube can be caused by 4 o-rings.
2 of the…Read more

]]> 15a5a90bbf9fabf9d0c266e4afea1a19 veerkracht replied to the topic EDgun .25 short review video in the forum EdGun https://talonairgun.com/forums/topic/edgun-25-short-review-video/page/3/#post-254347 Fri, 03 Jun 2016 19:22:09 -0400 Improvements on the edgun design:
Make it possible to shoot below reg without damage. (foolproof)
The 2mm valve stem will work, properly hardened.
Fill it up to 300 bar (foolproof)
Give the barrels a good check before accepting them from manufacturor.
Semi auto is better than multishot.
Hst adjusting without disambling the stock.

Regards Robert.

]]> 59a44fa8a985ecd99775b310ae52c93a veerkracht replied to the topic One inch groups at 100 yards in the forum BullPup General Chat https://talonairgun.com/forums/topic/one-inch-groups-at-100-yards/#post-251098 Sat, 16 Apr 2016 14:56:48 -0400 With a good batch .22’s I have been shooting 1.25″ ctc groops or less during a match.
That is 6 * 5 shots at 100 meter.
Normaly groops vary from 2 to 5 cm ctc.
My record still is 11mm ctc during a match.

Matador R3 std,
bsa barrel.

Regards, Robert.

]]> 8a00cac61f4cac59dcdc921f9e5f650c veerkracht replied to the topic 25 cal JSB heavies in the forum EdGun https://talonairgun.com/forums/topic/25-cal-jsb-heavies/#post-251072 Sat, 16 Apr 2016 05:55:21 -0400 Hi Tedd!

Good to hear from you.
Nice grooping!
You are still using the .25 BSA barrel?

Regards, Robert.

]]> 3d36176623503dc909aa5938ddd4e91c veerkracht replied to the topic Edgun VS American crow in the forum EdGun https://talonairgun.com/forums/topic/edgun-vs-american-crow/#post-250440 Wed, 06 Apr 2016 15:58:47 -0400 quote keyser soze:I swear they know my car, they know the sound of an EDgun cocking and they know my face. Trust me this murder does not like any of the 3 aforementioned items.
Nice shooting!
Crows:
https://www.youtube.com/watch?v=vgxNMnh6_3c

]]> 11230fffc0e83659f7247f85f6578544 veerkracht replied to the topic Question for Ed in the forum EdGun https://talonairgun.com/forums/topic/question-for-ed-d74/page/2/#post-250135 Fri, 01 Apr 2016 09:30:39 -0400 After some tuning I got 110 joule out my choked R3 long using .25 flatnosed 50 grains cast bullits.
So theoreticly it must be possible that the unchoked R4 reaches the 100 joule, 74 Fpe.

But till now I did not find a .25 cast bullit the gives me match worthy grooping.

Regards, Robert.

]]> 8a6beff6200fe71703e62c77bcd773c3 veerkracht replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/8/#post-246835 Mon, 22 Feb 2016 17:51:20 -0400 I think 2,5 grams.
All of my valves are in guns.
But I think Endo has one out of his gun.
Maybe he can weight it?

Regards, Robert.

]]> 9c57887cda64a23a6eb99bd4562c32a0 veerkracht replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/8/#post-246818 Mon, 22 Feb 2016 13:08:58 -0400 quote DanT55:quote Veerkracht:I shot 1500 times now with the 2mm spring-less valve rod at 150 bar and 100 joule +.
It is still working perfectly.
Due to (a lot) less hst I do not think it is necessary to go 3mm.
It must be hardenened, but that should they both be anyhow.

Regards, Robert.

Do you have the heavy hammer?

DT

Nope,
I use the…Read more

]]> 8626bbc04c4f64e932ced57f259b2eba veerkracht replied to the topic EDgun Matador, caliber .30, second generation. in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-caliber-30-second-generation/page/7/#post-246802 Mon, 22 Feb 2016 06:57:59 -0400 I shot 1500 times now with the 2mm spring-less valve rod at 150 bar and 100 joule +.
It is still working perfectly.
Due to (a lot) less hst I do not think it is necessary to go 3mm.
It must be hardenened, but that should they both be anyhow.

Regards, Robert.

]]> e6167b3b42c056d4877f8e7fa6667406 veerkracht replied to the topic EDgun R3 .30 caliber FIXED!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-r3-30-caliber-fixed/#post-246398 Tue, 16 Feb 2016 16:54:38 -0400
I made 2 types of replacement valves.
The springless black valve and an improved spring type.
For power the springless valve will do its thing (up to 100 joule+),
for the .22 and .25 the white one is good.
The hardened metal rod goes deeper in to the valve body and is secured with a special glue.
Its weight is about the same as the Original ed…Read more

]]> 5e9fdadb6e83e751e4c54a8112ea8533 veerkracht replied to the topic Edgun air tubes in the forum EdGun https://talonairgun.com/forums/topic/edgun-air-tubes/page/2/#post-245275 Sat, 06 Feb 2016 15:54:36 -0400 http://hyperphysics.phy-astr.gsu.edu/hbase/kinetic/waal.html

Regards, Robert.

]]> d04f2bb5f7dd55145270da7341dcb14d veerkracht replied to the topic king heavy.25/reg pressure. in the forum EdGun https://talonairgun.com/forums/topic/king-heavy-25-reg-pressure/#post-244160 Sun, 24 Jan 2016 07:07:01 -0400 mrv,

Wow, 300 m/s with heavy kings?
That is a LOT of energy coming from a std.
Keep an eye on the tube pressure, do not shoot under reg.
The hammer wil hit the bronze nut hard.
Maybe lower the reg pressure some, it will give a couple of shots more.
How is the cocking of the hammer?

Good grooping at 275 was my friends conclusion to.
I have been…Read more

]]> 38d8bf274139f319eb6c3e5023c3020e veerkracht replied to the topic king heavy.25/reg pressure. in the forum EdGun https://talonairgun.com/forums/topic/king-heavy-25-reg-pressure/#post-244046 Fri, 22 Jan 2016 18:24:58 -0400 I got the idea from Leo Bokkum.
I tried with a lighter spring and without spring.
Both worked fine but with the (lighter) spring I could not reach 295 m/s. @ 150 bar.

Regards, Robert.

]]> 7c7baa8dff31fb652e4b3ed3e3007291 veerkracht replied to the topic king heavy.25/reg pressure. in the forum EdGun https://talonairgun.com/forums/topic/king-heavy-25-reg-pressure/#post-243994 Fri, 22 Jan 2016 07:26:58 -0400 Original valve without valve spring, 150 bar.
Make sure to give the hst less tension before testing.
Cock the hammer before filling the first time from zero.
The old housing:
glue the pilar of the valve spring to the middle section to prefent the valve from falling in to the middle section,
when there is no tube pressure.
OR keep the gun in…Read more

]]> 9c6f2f476fdb5ab5058406a644096eab veerkracht replied to the topic king heavy.25/reg pressure. in the forum EdGun https://talonairgun.com/forums/topic/king-heavy-25-reg-pressure/#post-243230 Mon, 11 Jan 2016 15:58:36 -0400 I have been shooting with the heavy king at 295 m/s,
but the grooping at 75 meter was not good.
At least with the LW barrel.

I do not know how about other barrel brands.

If you planned to shoot at 150 bar for a long time,
maybe it is an idea to remove the valve spring.
It saves a lot of hst and your valve won’t breakdown that fast.
Also check…Read more

]]> 44e16822e489d41e85c3fad97b00ce92 veerkracht replied to the topic king heavy.25/reg pressure. in the forum EdGun https://talonairgun.com/forums/topic/king-heavy-25-reg-pressure/#post-243129 Sun, 10 Jan 2016 14:00:15 -0400 My long gets it up to 295 ms at 150 bar.
I think it will do for the std.

At 295 there is no grooping with the lw.

Regards, Robert.

]]> 26cb5a214bed69c6f7f7cf7440bf9c0a veerkracht replied to the topic Regulator acting weird!!!! in the forum EdGun https://talonairgun.com/forums/topic/regulator-acting-weird/#post-240567 Thu, 03 Dec 2015 17:30:24 -0400 Some reg have problems to go above 140 bar.
The valve is at the end of its stroke.
Just get a normal Washer, 1 mm thick.
Place it like ()()()()()()I
You will have to adjust the reg again, but it will reach 140 bar.
1mm, NOT thicker.

Regards Robert.

]]> 62144759a8176458b1676ff286249558 veerkracht replied to the topic My EdGun Matador R3M 22 cal in the forum EdGun https://talonairgun.com/forums/topic/my-edgun-matador-r3m-22-cal/page/3/#post-238876 Sat, 07 Nov 2015 18:58:33 -0400 GKU,

I used a piece of o-ring to fill the lock down hole.
Works the same, the treads won’t get damaged.

Regards, Robert.

]]> 2bad2f32a700f3a00e49032909543433 veerkracht replied to the topic Edgun doing it at 100 meter match in the forum EdGun https://talonairgun.com/forums/topic/edgun-doing-it-at-100-meter-match/page/2/#post-238790 Fri, 06 Nov 2015 18:49:12 -0400 quote Pippo:Congrats for that nice R3 :8:

(But having the two screws trigger, isn’t it actually a R 2.5?)

Pippo,

The first R3´s all had the 2 screw, whitch was also on the R2.5.
with the 2.5 the trigger setup was not connected to the sear setup.
I even remember an R3 with no moa rail.

Lonestars are affortable and mostly have the old .25…Read more

]]> d804008a4aae081200060ec08b2cdd59 veerkracht replied to the topic Edgun doing it at 100 meter match in the forum EdGun https://talonairgun.com/forums/topic/edgun-doing-it-at-100-meter-match/page/2/#post-238708 Thu, 05 Nov 2015 18:38:21 -0400 quote RomeoAlfa:Nice job! Do you use a bipod with a sandbag at the rear?

Romeo,
The front is supported by a “home made divise”
The rear is suported with my hand.
Not sure if the link will work, my shooting table:

http://www.luchtbuks.net/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=169506

Regards,…

]]> 1681b4c38292e9d526ee4f1d3f873b18 veerkracht replied to the topic Edgun doing it at 100 meter match in the forum EdGun https://talonairgun.com/forums/topic/edgun-doing-it-at-100-meter-match/page/2/#post-238544 Tue, 03 Nov 2015 16:25:25 -0400 Thanks for the congrats!

My trigger has 2 adjustment screws, I use only one of them during the match.
It is not the latest version.

I am shooting unsorted AA16’s at 295 m/s.
I bought 4 different batches and only one of them gave me this results.

Katwijk is a really nice track to shoot.
It has real time scoring at the monitor.
Shooting at one…Read more

]]> 95644eec50de3542b04fd284e06aab27 veerkracht replied to the topic Edgun doing it at 100 meter match in the forum EdGun https://talonairgun.com/forums/topic/edgun-doing-it-at-100-meter-match/#post-238523 Tue, 03 Nov 2015 10:33:16 -0400 Thanks Endo!

This was a great match, I also shot the smallest 5 shot groop of the day.
I think it was about 15MM, it is dificult to calculate it out of the results.
The track at Katwijk has a digital counting system.
My results:

Some pics:
http://www.luchtbuks.net/index.php?showtopic=99716

Edit.
Total…Read more

]]> c1db729c6f5c925e2f9401b858f8a040 veerkracht replied to the topic R3 Gen 1 Valve Upgrade Arrived - 30 Cal in the forum EdGun https://talonairgun.com/forums/topic/r3-gen-1-valve-upgrade-arrived-30-cal/#post-238182 Tue, 27 Oct 2015 17:57:24 -0400 Looks good Coda!

Steel rod, pom disk and anodized titanium (or aluminium?) valve?
It looks solid, for sure it will last a lot longer.

Regards, Robert.

]]> 3002dfd219b1127419e23c44077c3a75 veerkracht replied to the topic Taipan Mutant vs. Edgun Matador R3 in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-vs-edgun-matador-r3/page/3/#post-228637 Sat, 13 Jun 2015 10:36:02 -0400 Hi Endo,

That air eficienty is incrediable.
63 shots of 42,5 joule out of 200cc is unique.

What is the weight of the hammer?

Regards, Robert.

]]> 0006a922babbc72d0ad806bee079386f veerkracht replied to the topic Taipan Mutant vs. Edgun Matador R3 in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/taipan-mutant-vs-edgun-matador-r3/#post-227055 Thu, 21 May 2015 17:22:12 -0400 Hi Endo,

Again, you did a very nice job in testing and comparing.
It seems that the Mutant is a gun with lots of potential,
your writing awakened my curiousity.
I am looking forward to the first long range groops.
CZ barrels can be very acurate.

Also credit to dman in sending you a sample just for testing!
The question is: will it ever return…Read more

]]>