Talonairgun | walt-in-hawaii | Activity https://talonairgunforum.com/members/walt-in-hawaii/activity/ Activity feed for walt-in-hawaii. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 01766a849d2a224aa27bf618273e6824 walt-in-hawaii replied to the topic Rifled- Modified OEM Valve in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/rifled-modified-oem-valve/#post-146588 Fri, 09 Dec 2011 02:06:04 -0400 C’mon guys, let the guy have his shot at fame and glory. I’ll bet he can sing the blues just as well as anyone else can. Personally I don’t think a vortex would work, but then again, I never bought one of them things to put inside your carburetor either. (or fuel injection air inlet)

Some numbers might help later, when you have the data.

Why…Read more

]]> 76be632104478bf19c0f270b0e4e46c3 walt-in-hawaii replied to the topic 31" Condor in the forum Mods/Machinists https://talonairgun.com/forums/topic/31-quot-condor/page/2/#post-146587 Fri, 09 Dec 2011 01:57:14 -0400 The blank is rifled already. Breech doesn’t cost that much to cut, hell, I did a couple for free for a few airgunners who wandered into my garage with holes in their pockets and blank looks on their faces.

walt

]]> 015b7fca0ebaa1c1e9b9052766346d23 walt-in-hawaii replied to the topic My new LBT mold and Lee dies came in yesterday in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/my-new-lbt-mold-and-lee-dies-came-in-yesterday/#post-146479 Wed, 07 Dec 2011 15:57:36 -0400 hmmmm, good looking set there roach.
what other weights do they come in?

walt

]]> e7719cd6a8bd619af680574fbd45724e walt-in-hawaii replied to the topic Humble Pie in the forum Mods/Machinists https://talonairgun.com/forums/topic/humble-pie/#post-146478 Wed, 07 Dec 2011 15:50:14 -0400 Wow fairlyinc, I am honored. Never thought I’d meet Rube Goldberg in my lifetime.

walt

]]> 870f4bdab9381a66f028eb5ae0b598b4 walt-in-hawaii replied to the topic 31" Condor in the forum Mods/Machinists https://talonairgun.com/forums/topic/31-quot-condor/#post-146387 Tue, 06 Dec 2011 00:52:42 -0400 I cut a leade (a very fine taper) into the breech end on the inside so that the user will not have to carry around a wooden clothes pin with him all the time to seat pellets. Since he has already told me he plans to dedicate this gun for Jerry’s large slugs and similar pellets, the normal small pellets are not a concern, otherwise the small…Read more

]]> 228caf661cfe7d9fbd69763f54164922 walt-in-hawaii replied to the topic 31" Condor in the forum Mods/Machinists https://talonairgun.com/forums/topic/31-quot-condor/#post-146325 Mon, 05 Dec 2011 15:48:48 -0400 the mandrel is long, so I sized one end slightly larger than the other end. That way, I have one end to use on “small” receivers and the other for “large” receivers.

walt

]]> 6e2751d45e3f4f03f246014676a70a2c walt-in-hawaii replied to the topic Has anyone talked to Cygnus X lately? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/has-anyone-talked-to-cygnus-x-lately/#post-146316 Mon, 05 Dec 2011 07:25:22 -0400 He’s busy with little ones, I think. Plus what sounded like major back pains.
Post a pic of the barrel, or measure the diameter, will really cut down on your possibilities. Knowing Cyg he stuck to something reasonable and easy to get.

walt

]]> 277f679a05d81c272a19070a2e2be171 walt-in-hawaii replied to the topic One Piece Condor Valve in the forum Mods/Machinists https://talonairgun.com/forums/topic/one-piece-condor-valve/page/2/#post-146308 Mon, 05 Dec 2011 04:16:19 -0400 Huh? sorry, I didn’t check your picture out yet, just taking a break here and there from the lathe. When I stand and work long periods like this my knees swell up to the size of melons and I have to stop due to the pain. Back kills you after a day of doing this as well. I look like the friggin hunchback of notre dame. Before I started,…Read more

]]> 538a3921d718f01b59f65363c781e81a walt-in-hawaii replied to the topic One Piece Condor Valve in the forum Mods/Machinists https://talonairgun.com/forums/topic/one-piece-condor-valve/page/2/#post-146284 Sun, 04 Dec 2011 23:13:38 -0400 Fairlyinc, good for you.

Moneyshot, not much. It will be very reasonable as I don’t have the time to do this to make side money so I’ll just get rid of them and write this off as something I cannot get to.

The 10/22s turned out wonderful. I ended buying a Kidd trigger (ouch) for mine and just reworked the factory trigger for the boy’s. Man, good…Read more

]]> 355ebbd51180432de29c05fbfa54df46 walt-in-hawaii replied to the topic One Piece Condor Valve in the forum Mods/Machinists https://talonairgun.com/forums/topic/one-piece-condor-valve/#post-146278 Sun, 04 Dec 2011 20:54:31 -0400 Walt didn’t disappear, he’s still made of long chain molecules that don’t dissolve in the rain nor do they permit visible spectrum light to permeate. He’s just f*ng busy these days. Crap work is driving me nuts.

the batch of one piece valves are where I left them, on the benchtop. I’m clearing an old project that another friend has been very…Read more

]]> b2acfe5e8b423f825f3c829c82fc44af walt-in-hawaii replied to the topic Compressors: Which one do you own, or have experience with? in the forum General Chat https://talonairgun.com/forums/topic/compressors-which-one-do-you-own-or-have-experience-with/page/2/#post-138283 Mon, 08 Aug 2011 04:31:07 -0400 Bauer Oceanus, 6hp honda gas motor. about 4cfm, but since the gas motor has a carb with a throttle, I usually trim back the throttle as slow as practicable, this is to give the tank as much time to cool as possible. this also lessens the thermal shock to the tank, which is important for me since I don’t have an armored caddy to put the tank into…Read more

]]> 9445af36a03fbb37af4a703592ff34f1 walt-in-hawaii replied to the topic Why adjust the top hat, should it strike the valve body ? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/why-adjust-the-top-hat-should-it-strike-the-valve-body/#post-138209 Sat, 06 Aug 2011 03:30:00 -0400 quote AirGunner1:Is there any method before trial and error to get close ?

Yes. The method is this: ask yourself what you want to do with the gun. Thrashing about with a gun, a chrony and a truckload of air will gain you little if you have no idea what you want to do with them. Don’t be a kid in a candystore. Figure out what you want and work…Read more

]]> db23a3343837a220653950d75727a119 walt-in-hawaii replied to the topic Home Made Brass End Cap For R&L Shroud On Stubby in the forum Mods/Machinists https://talonairgun.com/forums/topic/home-made-brass-end-cap-for-r-amp-l-shroud-on-stubby/#post-137857 Sat, 30 Jul 2011 21:06:13 -0400 I have seen several, they are very good machines but like anything, you can abuse them to the point they become useless. If it’s been maintained well and will hold good tolerances and the ways are straight, it will always be a good buy, regardless of brand. the only issue with the SB is the belt drive, I have heard from other owners who were…Read more

]]> 58a6ed4c474bd199f7d4099901996999 walt-in-hawaii replied to the topic Home Made Brass End Cap For R&L Shroud On Stubby in the forum Mods/Machinists https://talonairgun.com/forums/topic/home-made-brass-end-cap-for-r-amp-l-shroud-on-stubby/#post-137849 Sat, 30 Jul 2011 15:40:01 -0400 Nicely done. is that a southbend? learned on a machine like that, gosh, now about 40 years ago? Have some fond memories of those. Looks like the ways have recently been scraped.

walt

]]> fffc746210019448945a7d35e08343da walt-in-hawaii replied to the topic Condor .25 (Barret 50 cal Barrel end) in the forum Mods/Machinists https://talonairgun.com/forums/topic/condor-25-barret-50-cal-barrel-end/#post-133647 Mon, 09 May 2011 19:27:18 -0400 Bubba, nice work. I thought of doing the same awhile back but don’t have a CAD rendering progam, so had to do everything by eye. I just settled on a straight port design and figured I’d try a slanted port on the next build 🙂 This was for my little 10/22.

aloha,
walt

]]> d00befc965af3d533add33e8e2cbbbb7 walt-in-hawaii replied to the topic BP cannon wanted built in the forum Mods/Machinists https://talonairgun.com/forums/topic/bp-cannon-wanted-built/#post-133539 Sat, 07 May 2011 04:29:46 -0400 Dude, now you want a CANNON??

just get a couple small nuclear devices on the black market and be done with it already. No sense messing with the small stuff.

If you’re gonna be a bear, be a grizzly.

walt

]]> 378bbae3df4cb1cd29284c8fabb39b70 walt-in-hawaii replied to the topic Barrel renewal in the forum Mods/Machinists https://talonairgun.com/forums/topic/barrel-renewal/#post-133538 Sat, 07 May 2011 04:26:36 -0400 The length is not that critical, you can shave a little off the end and get away with not moving the barrel in the bushings. However, I’d recommend just trying to gently tap it back into place, smooth the scratches, then redo the inside leade (the gently cut taper so you can seat the pellets easily) a bit. There is no pressure on that end of the…Read more

]]> 1cb6d0c6ffc262348973816fa87fee05 walt-in-hawaii replied to the topic Geordie David's high flow valve stem collets in the forum Mods/Machinists https://talonairgun.com/forums/topic/geordie-david-s-high-flow-valve-stem-collets/page/2/#post-133501 Fri, 06 May 2011 15:41:41 -0400 quote Y:Macro function if you have it… find the button or dial setting that looks like a flower will help too –

Your camera has a LOVE function?? (red heart on the right)

]]> 3de3a3d08c8e68043b62ba3e8ebeadd9 walt-in-hawaii replied to the topic Geordie David's high flow valve stem collets in the forum Mods/Machinists https://talonairgun.com/forums/topic/geordie-david-s-high-flow-valve-stem-collets/page/2/#post-133496 Fri, 06 May 2011 07:11:58 -0400 Rabbit, just pulling your leg. You’ll get used to my sense of humor before long. Or I might pull your leg clean off, who knows.

This is serious instruction you should take for all future pictures:

1) your camera has a worse sense of humor than I do.
2) in order to fuck you up, your camera is focusing on EVERYTHING other than the object you want…Read more

]]> ed6a0ac7b605143d28e2ffba91fadda1 walt-in-hawaii replied to the topic Vented Bushings - Why? in the forum Mods/Machinists https://talonairgun.com/forums/topic/vented-bushings-why/#post-133415 Thu, 05 May 2011 03:19:53 -0400 Nah, you guys are all fucking crazy. You vent them so they won’t smell bad later.

walt

]]> 433f18d1db0385cb9ca0b3f17546519d walt-in-hawaii replied to the topic Aftermarket hi-flo equivelants in the forum Mods/Machinists https://talonairgun.com/forums/topic/aftermarket-hi-flo-equivelants/#post-133412 Thu, 05 May 2011 03:10:03 -0400 Sorry dudes, Walt has been super busy making a few 10/22’s for his son who is now old enough to go shooting at the range. Whole new gun I have to bone up on 🙁

I have been away from the forum, my apologies to my bruthas. You guys seem to have cleaned up a bit, not much gratuitous sex and violence anymore?? Pablouk?? anyone???

walt

]]> 05ffee8d01058017c529e843e1682c54 walt-in-hawaii replied to the topic Geordie David's high flow valve stem collets in the forum Mods/Machinists https://talonairgun.com/forums/topic/geordie-david-s-high-flow-valve-stem-collets/#post-133411 Thu, 05 May 2011 03:05:14 -0400 Said it before and I’ll say it again: what the hell’s a mm??

walt

]]> f2c33883376157031f5f517cf1dc8e1f walt-in-hawaii replied to the topic Valves in the forum Mods/Machinists https://talonairgun.com/forums/topic/valves/#post-133407 Thu, 05 May 2011 01:22:31 -0400 Man time flies!
The brass body inserts are done. I am trying to make up the steel valve stems (one piece) but destroyed one of the prototypes trying to do a 2nd and 3rd operation on it. I have ordered new tooling (different type of collet system so they won’t be destroyed on the subsequent operations) which hopefully will solve the problems. Hope…Read more

]]> 847e82a7aaf12132e9ee534756683255 walt-in-hawaii replied to the topic Valves in the forum Mods/Machinists https://talonairgun.com/forums/topic/valves/#post-130908 Sun, 27 Mar 2011 19:02:37 -0400 zilog, made a few extras. These are not complete valves, just a brass insert and a bigger valve stem. Will post more later.

aloha,
walt

]]> 2ef266c8896c26b1bc45cded32f5d3f6 walt-in-hawaii replied to the topic Valves in the forum Mods/Machinists https://talonairgun.com/forums/topic/valves/#post-130836 Fri, 25 Mar 2011 12:06:22 -0400 Goodness me, walter, you sound… almost…. cheerful? 🙂

don’t chew me out for saying so!

it’s 2am and can’t sleep. Large file review coming up tomorrow. ugh. and in the middle of it, plans for pinning up my 10/22 bolt keep coming into my head… i have an irresistible urge to go out to the garage and measure the headspace and firing pin…Read more

]]> ce11fd7db1d8b8c5f424cb267214cea3 walt-in-hawaii replied to the topic Mini Mill Column Stiffening Mod (cheap) in the forum Mods/Machinists https://talonairgun.com/forums/topic/mini-mill-column-stiffening-mod-cheap/#post-130826 Fri, 25 Mar 2011 02:56:12 -0400 that thar’s a funny looking washing machine, if ya ask me.

aloha,
walt

]]> 33ae5d8aa21b6236bc88d4ed74222a23 walt-in-hawaii replied to the topic Wondering about twist rates in the forum Mods/Machinists https://talonairgun.com/forums/topic/wondering-about-twist-rates/#post-128919 Fri, 25 Feb 2011 15:44:09 -0400 The greenhill formula does not apply well to airguns, it’s main use is predicting stability in supersonic projectiles.

Why would you want to use a sabot? for me, using a .308 gives the advantage of having a larger, heavier bullet hit the target with more energy than a .22 or .25… using a sabot goes the other way, takes the energy off the…Read more

]]> c1f4ae50776fbe2176bfc7bda9f71ae6 walt-in-hawaii replied to the topic diameter of condor brass insert needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/diameter-of-condor-brass-insert-needed/#post-127902 Mon, 07 Feb 2011 23:49:34 -0400 Thanks Baz!

whats a mm?

]]> 5a0e1869c21e10ae962426b017953b24 walt-in-hawaii replied to the topic One Piece for Assman in the forum Mods/Machinists https://talonairgun.com/forums/topic/one-piece-for-assman/page/2/#post-127828 Sun, 06 Feb 2011 05:24:54 -0400 Thanks Ben. Oh! your bushing came back to me 🙁 damn post office. Insufficient postage??!! I had the right postage, it was just supposed to go first class…

Roach, send me one of yours then.

Baz, good to hear from ya. Yes, I cut a new O ring groove on the inside and it uses larger O ring. I’ll try to post a pic but I’m knee deep in aluminum…Read more

]]> 214bd4433f006b86df637c0d7ca095ff walt-in-hawaii replied to the topic One Piece for Assman in the forum Mods/Machinists https://talonairgun.com/forums/topic/one-piece-for-assman/#post-127813 Sun, 06 Feb 2011 00:18:55 -0400 Roach, not sure. I’ve no talon inserts here to compare with. But if it uses a different delrin seat then probably no.

]]> 82efdc26c35d6062334074628e9189b9 walt-in-hawaii replied to the topic One Piece for Assman in the forum Mods/Machinists https://talonairgun.com/forums/topic/one-piece-for-assman/#post-127807 Sat, 05 Feb 2011 21:58:21 -0400 Cab, it will be reasonable. I have to see how much AF wants for their brass body inserts (has to be modded and then sold with the new valve stem), but everything should be under $100 together, with a couple different delrin seats to change the valve height.

walt

]]> 6999aaac3dc48c8c23a51d17712c85cc walt-in-hawaii replied to the topic WTF Condor valve NOT more powerful than modded Talon valve in the forum General Chat https://talonairgun.com/forums/topic/wtf-condor-valve-not-more-powerful-than-modded-talon-valve/#post-127572 Tue, 01 Feb 2011 16:03:18 -0400 Norg, your barrel is too short to utilize the virtues of the condor valve. It will use a lot more air and make a lot more noise, but won’t give you more velocity, as you saw when we shot over my chrono using my condor/modded valve.

However, I just ran a test a few days ago using a new solid one piece valve stem that I’m making for another forum…Read more

]]> 59d589d4b9db29226b19a989057fcc29 walt-in-hawaii replied to the topic One Piece for Assman in the forum Mods/Machinists https://talonairgun.com/forums/topic/one-piece-for-assman/#post-127466 Mon, 31 Jan 2011 00:28:21 -0400 Jerry, for the first test I just put in around 1500psi, didn’t really look at the gauge carefully, might have been a couple hundred pounds less than that. Fired a few 31g kodiaks (in .25) with minimal preload.

From a 24″ barrel the chrono read around 860fps.

…..!!! I had to do a double take. From under 1500psi?? Unreal. HOlds some real promise.

walt

]]> 5976ffdeb8cd7836a683e5660e8735d4 walt-in-hawaii replied to the topic Making a custom mold advise needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-a-custom-mold-advise-needed/page/7/#post-127465 Mon, 31 Jan 2011 00:23:17 -0400 quote Voltar_1:Walt, what you are calling a cherry is called a form tool AFAIK

a cherry has the full shape to it.

Thanks for that Walt, but I don’t do this kinda thing anymore, too time consuming. But there are about a bazillion other casters, shooters, and machinists out there calling it ‘cherries’ and goodness me, no one’s told them 🙂

On to…Read more

]]> a25dfb0b2144a2fde56495f0be60f1d7 walt-in-hawaii replied to the topic Making a custom mold advise needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-a-custom-mold-advise-needed/page/6/#post-127439 Sun, 30 Jan 2011 18:24:08 -0400 Didn’t have time to check that website out, I’m in the middle of designing something else that’s using up most of my 3 or 4 brain cells right now. but gauging from that picture, that guy’s using cnc machining, which i know nothing of. for sure the bit on the left is for cnc as it has a spiral flute, like a normal twist drill, and the excerpt…Read more

]]> e8f6698b4fa9c719a5dd79915e4c26f0 walt-in-hawaii replied to the topic One Piece for Assman in the forum Mods/Machinists https://talonairgun.com/forums/topic/one-piece-for-assman/#post-127437 Sun, 30 Jan 2011 18:02:33 -0400 Cab, the one piece stem is fabricated from a piece of billet steel. but it goes into a modified hi flo, I have to resize the hole that goes through the brass body part to accomodate the wider diameter. So yes, it can be done to any hi-flo valve you have.

]]> 09431631d2d669ee34dc930ec9628860 walt-in-hawaii replied to the topic Making a custom mold advise needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-a-custom-mold-advise-needed/page/6/#post-127409 Sun, 30 Jan 2011 01:20:51 -0400 quote Voltar_1:quote walt_in_hawaii:Dude, I think everyone is getting hung up on splitting the mold and somehow clamping it down around a cherry that’s the exact size of the finished round; and I don’t know anyone who does it that way. the reason is simple; you can’t control a spinning clamping thingy whatchmacallit. so why even try? the mold DOES…Read more

]]> 07da932efc1c0762efb0f46d84bd4ded walt-in-hawaii replied to the topic Scope advice? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/scope-advice/#post-127407 Sun, 30 Jan 2011 01:06:19 -0400 Digi, nice bipod setup. You used to own a TRG right? (that was the best damn bipod I ever used).

walt

]]> 5093647db8273386bfc8cc2c513090f5 walt-in-hawaii replied to the topic Making a custom mold advise needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-a-custom-mold-advise-needed/page/6/#post-127403 Sun, 30 Jan 2011 00:31:58 -0400 Dude, I think everyone is getting hung up on splitting the mold and somehow clamping it down around a cherry that’s the exact size of the finished round; and I don’t know anyone who does it that way. the reason is simple; you can’t control a spinning clamping thingy whatchmacallit. so why even try? the mold DOES NOT require clamping around…Read more

]]> ba21b9174ebdfc4b9993ee053dfe5a83 walt-in-hawaii replied to the topic Making a custom mold advise needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-a-custom-mold-advise-needed/page/6/#post-127391 Sat, 29 Jan 2011 21:18:58 -0400 the japanese and french and everyone else has quietly been studying it ever since it came out in the 80’s. Only the US turned their backs on it ever since the big MIT fiasco that ‘debunked’ it. Now the name is synonymous with fraud, so they don’t call it ‘cold fusion’ anymore, there are a couple companies trying to rush ‘energy cells’ to the…Read more

]]> b4f92580dc041fa361da3f39cf2a09eb walt-in-hawaii replied to the topic Making a custom mold advise needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-a-custom-mold-advise-needed/page/6/#post-127386 Sat, 29 Jan 2011 19:47:09 -0400 Oh, for the record, not that anyone will care, but I don’t think cold fusion is a hoax. Never was. The tritium by products were always there, but in minute quantities so scarce that they were difficult to differentiate from background noise and sample contamination. Good thing, too. Otherwise there’d be a lot of dead guys around the world…Read more

]]> 42708561c42187a7a449d729e3af455e walt-in-hawaii replied to the topic Making a custom mold advise needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-a-custom-mold-advise-needed/page/5/#post-127384 Sat, 29 Jan 2011 19:30:27 -0400 Yeah, maybe he is. But, that’s one of the perks of being right. Banana, in case you didn’t know, Jerry casts more bullets (pellets) in a month than you’ll cast in your life, probably. He’s not talking just to talk. If he’s got something to say about bullet casting, I’d listen.

walt

]]> e6528d85080a9e5810a30834a0317590 walt-in-hawaii replied to the topic 88cf 4500psi tank / hose from Joe Brancato - Review/Pictures in the forum General Chat https://talonairgun.com/forums/topic/88cf-4500psi-tank-hose-from-joe-brancato-review-pictures/#post-127382 Sat, 29 Jan 2011 19:13:20 -0400 Joe’s stuff is great quality. I have one of his hose assemblies on my CF bottles.

walt

]]> c02b0b3e83b70400679030784003fc73 walt-in-hawaii replied to the topic Does a conventional ACP bullet damage a LW barrel? in the forum Mods/Machinists https://talonairgun.com/forums/topic/does-a-conventional-acp-bullet-damage-a-lw-barrel/#post-127374 Sat, 29 Jan 2011 16:44:01 -0400 Inquiring minds want to know!

I don’t think you’ll ever find the answer. Takes more energy than a 3000psi bottle can deliver, to inscribe the rifling into a jacket. trust me, been there. So the answer is no, because you can’t get the bullets to exit the barrels.

aloha,
walt

]]> ea6a3a7fe9fafff941fd2498a553411b walt-in-hawaii replied to the topic Making a custom mold advise needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-a-custom-mold-advise-needed/page/5/#post-127373 Sat, 29 Jan 2011 16:39:57 -0400 Sorry AG, that mold won’t work. It is the type designed for fishing lures, so they are not precise enough. The hinges are big and sloppy, they don’t have locating dowels to align the 2 halves exactly, and lastly they don’t have relief lines scribed on the inner surfaces to allow for escaping gas.

but, hey; give it a go and let us know how they…Read more

]]> bf90c136d157e941847af6f7f8b81834 walt-in-hawaii replied to the topic Making a custom mold advise needed in the forum Mods/Machinists https://talonairgun.com/forums/topic/making-a-custom-mold-advise-needed/page/4/#post-127318 Fri, 28 Jan 2011 15:40:22 -0400 Ban, there is a place for pure craftsmanship unaided by mechanical means and this aint one of em. Sorry I have to disagree with ya.

Custom mold making requires a high degree of precision. Although high precision is possible with hand tools, such projects are usually in the area of outside forming, where you can sand, or hand file, then look or…Read more

]]> 1e08b0f695409b7ee73e70d4e3db1f3a walt-in-hawaii replied to the topic One Piece for Assman in the forum Mods/Machinists https://talonairgun.com/forums/topic/one-piece-for-assman/#post-127016 Mon, 24 Jan 2011 05:24:52 -0400 Roach, huh? It’s the valve stem. Since it’s larger than a stock one by a little bit, it won’t drop into a normal valve body. The brass insert has to be enlarged to fit as well, and a new O ring groove cut to accomodate the larger valve stem.

]]> 7ffb7ebfa7945b151a0edeeac4f1e1f6 walt-in-hawaii replied to the topic buckshot, bull s#!* in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/buckshot-bull-s/#post-126570 Fri, 14 Jan 2011 15:37:01 -0400 DOPE!

]]> 7243878f5e658d23dddce0caab33c738 walt-in-hawaii replied to the topic First Cuts... New Lathe in the forum Mods/Machinists https://talonairgun.com/forums/topic/first-cuts-new-lathe/page/2/#post-125511 Tue, 28 Dec 2010 12:30:26 -0400 quote Shadoh:You can get your cheap three jaw to be very accurate. First, stamp each jaw with a number or mark of some kind. Then mark the chuck body keyways with the same mark/number so that you alway put the same jaws in the same keyway. You will also want to mark your lathes mounting plate in the same way so that you always mount your chuck…Read more

]]> 55f3fc38ebae50b9772e45b3138050d4 walt-in-hawaii replied to the topic DE -pinger mod ??? in the forum Mods/Machinists https://talonairgun.com/forums/topic/de-pinger-mod/#post-125371 Sun, 26 Dec 2010 20:09:21 -0400 Huh? You already have a foam cover on the tank. On the outside. Or did you strip that off? I don’t think the tank cares if the foam is inside or out.

aloha,
walt

]]>