Talonairgun | wanta-edgun | Activity https://talonairgunforum.com/members/wanta-edgun/activity/ Activity feed for wanta-edgun. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 155f052aa2e53bb2e958902d37dca44c wanta-edgun replied to the topic What is the best performing REG out there? in the forum BullPup General Chat https://talonairgun.com/forums/topic/what-is-the-best-performing-reg-out-there/#post-211078 Sun, 21 Sep 2014 15:02:08 -0400 I’ve been thinking about this a lot. My ultimate goal (over the next five to ten years or so) is to make my own rifle. I think u need to look at more than just “the best” regulator. I would look at what the primary purpose of the gun is going to be. If its a long range bench rest gun, weight and shot count don’t matter as much as the standard…Read more

]]> cda766c121c5a02d68a6def8866b277f wanta-edgun replied to the topic TalonTunes Is Proud To Carry The Edgun..... in the forum EdGun https://talonairgun.com/forums/topic/talontunes-is-proud-to-carry-the-edgun/#post-210330 Mon, 08 Sep 2014 09:22:44 -0400 Awesome. Great to here it!!!
One little thing. The 25 cal says it comes with two, ten round mags. Unless the new ones have been improved, it should be 9 rounds per mag.

]]> 9c1499a8e59853130f629f55fc4c50b0 wanta-edgun replied to the topic Barrel diameter in the forum EdGun https://talonairgun.com/forums/topic/barrel-diameter/#post-210060 Wed, 03 Sep 2014 01:03:58 -0400 My 25 cailber is .478″. I have a 22 cal barrle that is the sme o.d. Can’t comment on .177 cailber.

]]> 4d76fe7cf807c9853c914989f5fe1b5b wanta-edgun replied to the topic Polished Edgun in the forum EdGun https://talonairgun.com/forums/topic/polished-edgun/#post-209862 Sat, 30 Aug 2014 19:46:43 -0400 With all that mutual respect for everyone on the site and all, I’ll tone down my response to this.
I hope no one has done this. First, its gotta kill any tactical use of the gun. A bright polished tube would stand out in the woods. Second, Polishing weakens the metal. Third, the tube helps keep everything lined up properly(I think) and the…Read more

]]> 77b5a3ef8c8e8bf7b15e13cd6465de12 wanta-edgun replied to the topic EDGUN SAFETY in the forum EdGun https://talonairgun.com/forums/topic/edgun-safety/#post-209859 Sat, 30 Aug 2014 18:39:36 -0400 Cryptic respond due to computer issues. Takes long time now to type.
I actualy bent my bolt (the tapered probe end) by knocking trigger while it was pulled back, it rammed it forward, fired, knocked it back again(rotating the the mag too quickly, causing the probe to bent). I’m guessing that’s what happened, it was too quick to see, but the…Read more

]]> 92306d80005f30ddd39de5fb13bb08bf wanta-edgun replied to the topic EDGUN SAFETY in the forum EdGun https://talonairgun.com/forums/topic/edgun-safety/#post-209854 Sat, 30 Aug 2014 17:23:21 -0400 +1
That’s how I do it. Leaving the bolt open isn’t good idea.

]]> ea185e16f89f5f293a328c271a6eb1a5 wanta-edgun replied to the topic EDgun R3M BLACK SOFT RUBBER STOCK in the forum EdGun https://talonairgun.com/forums/topic/edgun-r3m-black-soft-rubber-stock/#post-208775 Thu, 14 Aug 2014 15:07:23 -0400 You seam to be the first I know of. to get one. That is exactly what I wanted but they hadn’t been made yet when I ordered mine. If you ever consider trading it for a wood stock, please let me know first. I hope u like it.

]]> 0926fba86145f1f08b7df009aeb8a65a wanta-edgun replied to the topic Off topic. Karma is a bitch in the forum EdGun https://talonairgun.com/forums/topic/off-topic-karma-is-a-bitch/page/2/#post-208324 Sat, 09 Aug 2014 20:37:15 -0400

Here is what ended up with as a replacement for the del sol. My head wasn’t done healing yet and I had to strap on a Helmet and ride 120 miles a day on an overgrown scooter. I used to say that my edgun was the second most valuable thing I own, well its just moved up the list. Just can’t tell the wife that selling the r3m with a $800 scope on…Read more

]]> ce7db87ff024d2cd00ebc8dd6c76e913 wanta-edgun replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/page/4/#post-206304 Sun, 13 Jul 2014 20:21:47 -0400 I get your point, and I have a gun my grandfather took off a dead German that was apparently made in Russia. However, thwt not exactly the same as handing over high end tech that took us years and billions to develop. It also doesn’t leave American pilots flying aircrafts with stability logic devises that were made in china. I’m not making any…Read more

]]> 145fe152d9122bcb0edb39983973a7b8 wanta-edgun replied to the topic R3M, How to prevent from double loading in the forum EdGun https://talonairgun.com/forums/topic/r3m-how-to-prevent-from-double-loading/#post-206107 Wed, 09 Jul 2014 20:06:50 -0400 If I load a pellet and don’t shoot, I always drop the multishot lever down and deco I it by holding the bolt back while pulling the trigger. The when I’m ready to take thwt shot, I just recoi the gun and then flip the lever back up.

]]> efdabc9fea91abf3bba3b6b13eedc42c wanta-edgun replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/page/3/#post-205871 Sat, 05 Jul 2014 15:53:14 -0400 Made in china and cloned in china are not the same thing. The people making clones are not usualy conserned with quality and don’t put there name on the product. quote Pippo:Dear Friends,

I’m not a “Made in China” fan but we have to remember that today almost everything is manufactured in China and as I said, even though I’m not a fan of this,…Read more

]]> 7ebf30634d4af2c56be4744446f4682a wanta-edgun replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/page/3/#post-205849 Sat, 05 Jul 2014 05:21:41 -0400 Actually the P12 uses the original EdGun hammer and barrel clamping system (R1 and R2). That same hammer system is used in a few other early model airguns as well… The barrel floating system is the R3 development.

Here is a video of the early EdGun hammer, which happen to be the same hammer that is in the P12. Note the absence of the…Read more

]]> b22e9dcbf17058256ed5a0d91902677a wanta-edgun replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/page/2/#post-205834 Sat, 05 Jul 2014 02:23:32 -0400 quote tbear:I’m confused. Are you guys worry about the cloning or the made in China? I seem to recall a lot of people being happy with the P-12. Aren’t they made in China? Oh yes they are! And it got good reviews. So that theory goes out the window. I don’t care where the fuck things are made. If it’s a good deal I’m buying it. I won’t be the…Read more

]]> 48aa71fc2d7b45e612913dea8c93d9b0 wanta-edgun replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/page/2/#post-205810 Sat, 05 Jul 2014 00:20:36 -0400 quote Kekoa:quote tbear:Make you think though. If the Chinese can make this for $500, why does Ed charges $2000+ ?

If you want quality sometimes it costs a little more. Supply and demand sometimes causes increase in price. If you think about it Ed’s price has stayed pretty stable for at least the last few years or so. This is a free market…Read more

]]> 67c6c148a9af8ac8e648e6e2c40f2038 wanta-edgun replied to the topic edgun matador china!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-china/#post-205789 Fri, 04 Jul 2014 20:39:05 -0400 For me its not as simple as china stuff is crap because I have delt with American company’s that have been forced to move production to china in order to stay in business. When the Kansas City plant was coming online, we tried to use as much American tooling as we could but they just couldn’t deliver within spec, budget, and timeline. We ended up…Read more

]]> 504f0cfd88727fe87b17177fb942eb17 wanta-edgun replied to the topic Off topic. Karma is a bitch in the forum EdGun https://talonairgun.com/forums/topic/off-topic-karma-is-a-bitch/page/2/#post-205511 Sat, 28 Jun 2014 17:16:29 -0400 I was doing about 60 miles per hour. Since the car was restored instead of new, I didn’t carry full coverage. I had a 72 Chevy truck once that the insurance only gave me $750 for since they only use the blue book value of an average vehicle. They won’t consider the true value of the car unles you pay extra for some sort of classic or show car…Read more

]]> 165b164f404b237e0f899be7f57c6a45 wanta-edgun replied to the topic Off topic. Karma is a bitch in the forum EdGun https://talonairgun.com/forums/topic/off-topic-karma-is-a-bitch/#post-205455 Fri, 27 Jun 2014 06:52:39 -0400 It started out as a Lincoln town car. Just kidding. It was a Honda del sol.

I’m not so sure I can say anyone is watching out for me or likes me. If they are, I’d appreciate if it next time they just moved the bull a few feet to the left or just killed me out right. This B.s. with the concussion and still finding glass stuck in my hands is…Read more

]]> dee7e9ae27d9a6660359b618bf4737a4 wanta-edgun replied to the topic Off topic. Karma is a bitch in the forum EdGun https://talonairgun.com/forums/topic/off-topic-karma-is-a-bitch/#post-205359 Wed, 25 Jun 2014 20:56:09 -0400 Ya, that edgun would be sold fast at $650. :rofl:

]]> 0c54fe9d44b3e355a5593e167b041b2e wanta-edgun replied to the topic Off topic. Karma is a bitch in the forum EdGun https://talonairgun.com/forums/topic/off-topic-karma-is-a-bitch/#post-205349 Wed, 25 Jun 2014 19:02:23 -0400 The cop knew who owned it but he showed up and said it wasn’t his without even looking at it. Bull wasn’t marked..

]]> 00dce2c792fb2a6fa112aa6f640fa725 wanta-edgun replied to the topic Shot of a life time? in the forum EdGun https://talonairgun.com/forums/topic/shot-of-a-life-time/#post-205311 Tue, 24 Jun 2014 17:16:25 -0400 Wen I say I’m surprised that I’m hitting at that range, what I meant was that I have been suprized since I bought the gun in December. Here is a post from 5 days before I took that shot

Here is another one from may 31st

As far as the percentages goes. I guess miss completely would be 33%, another wounding shot 33% and kill shot would have…Read more

]]> 13f1b575c1ac585e37b01aee2df04ed8 wanta-edgun replied to the topic Time for Change!!! in the forum BullPup General Chat https://talonairgun.com/forums/topic/time-for-change/page/2/#post-205252 Mon, 23 Jun 2014 00:12:34 -0400 quote knifemaker:Humm, I’ve never heard of AOA being even remotely referred to as the Cheapest Dealer! In fact, usually exactly the opposite. Nor have I ever heard of them being reliable. Humm???
I think he is referring to the cricket only. They are undercutting the others by $2-300 trying to put them out of business. I’ve never delt with AOA but…Read more

]]> 47fcd89cb37bebbe78b79db78c25d3f2 wanta-edgun replied to the topic Shot of a life time? in the forum EdGun https://talonairgun.com/forums/topic/shot-of-a-life-time/#post-205247 Sun, 22 Jun 2014 17:03:28 -0400 quote renval:Hey Wanta! are you looking for a tenant?! Man that’s a gorgeus yard you have there buddie!!!! Soooo jealous! In a good way 😉
Good shooting by the way!!!
Thanks for reminding me of nice this palace is. I often forget about it. It has really started to feel like a prison. 11 years ago I was the lead mechanic at a test facility in…Read more

]]> 265f536d0ab72a708349e4aa1706d436 wanta-edgun replied to the topic Regulator Washers Configuration in the forum EdGun https://talonairgun.com/forums/topic/regulator-washers-configuration/#post-205244 Sun, 22 Jun 2014 15:49:00 -0400 Do you have any proof that the reg is causing the accuracy issue? In example, crazy Chrony results or shot groups that show mostly vertical deviations? Normaly I wouldn’t start with the regulator as the first suspect unless there is a history of it being an issue or it only starting misbehaving after I had the reg apart.

I’m no expert on the…Read more

]]> e9ba015d1755a41f4592d55203274056 wanta-edgun replied to the topic Shot of a life time? in the forum EdGun https://talonairgun.com/forums/topic/shot-of-a-life-time/#post-205213 Sat, 21 Jun 2014 23:32:33 -0400 I never realized how much the angle of the shot would have on the pellet speed. I was shooting from about the same distance today from below the pond (+2 degrees) and was way off. I never actually got it figured out from that spot. I went back and started shooting from the side walk (-10 degrees vs the -14 degrees of the orginnal shot) and I…Read more

]]> 9294e89f1f1184af15e93c27ba46a0bb wanta-edgun replied to the topic Ed, any update on spare / replacement magainzes for R3M? in the forum EdGun https://talonairgun.com/forums/topic/ed-any-update-on-spare-replacement-magainzes-for-r3m/#post-205196 Sat, 21 Jun 2014 18:27:49 -0400 D you have any idea yet on the price! If the mags are plastic, then its probably a molded piece with little machining. Will that bring the price down a bit?

]]> 408486f9123fc761f45a3030759e47d0 wanta-edgun replied to the topic Regulator Washers Configuration in the forum EdGun https://talonairgun.com/forums/topic/regulator-washers-configuration/#post-205194 Sat, 21 Jun 2014 17:16:30 -0400 I was actually surprised to see that Ernest used a little bit of Molly on the spring washers. Since I realized that the spring washers are actually vented to atmosphere, they aren’t exposed to the unregulated pressure side or the regulated side. I don’t like using silicone an anything that is metal to metal. I do from time to time but only if…Read more

]]> 300ee32c1c6a0caacf26ea1aae1a37c0 wanta-edgun replied to the topic Matador R3M short or standard? in the forum EdGun https://talonairgun.com/forums/topic/matador-r3m-short-or-standard/#post-205163 Fri, 20 Jun 2014 23:42:15 -0400 Now that I’ve got my 25 standard shooting 45-55 shots per fill, I’m quite happy with it. However, it is far too powerful for small animals at short range. My next gun will probably be a a 22 for closer work. If your looking for examples of what the 25 can do, just check out eds videos.
I myself hit a bird at 250+ yards last night. Two words…Read more

]]> 29d4350cfafd474c6d8e81fa91f8074a wanta-edgun replied to the topic ED, R3 multishot kits, Yes OR No? in the forum EdGun https://talonairgun.com/forums/topic/ed-r3-multishot-kits-yes-or-no/page/2/#post-205079 Thu, 19 Jun 2014 15:22:54 -0400 I know this is kind of redundant but are these kits the same parts that are used on the r3m? Can they be used on the r3m? I would like to be able use a 22 kit on my 25 r3m and it wouldn’t be a bad thing to have an extra kit for parts in 25 caliber.

]]> c0d459e935a8ee0c464515c70418dd8e wanta-edgun replied to the topic Egg hunting from 70 to 150 meters. (76.6-164 yards). in the forum EdGun https://talonairgun.com/forums/topic/egg-hunting-from-70-to-150-meters-76-6-164-yards/#post-204937 Tue, 17 Jun 2014 15:09:11 -0400 Yes Ed. :fishing: that’s why I’m asking :biggrinn: what did you come up with as the best? I figure since we all own one, its not exactly a secret. I just haven’t tried measuring twist rate.

Do you expect to change the twist rate once the Heavy jsb super kings are available? Or is is the difference not enough to matter?

Keep up the good…Read more

]]> a956c5b47035ea9a701790ec8b003001 wanta-edgun replied to the topic Egg hunting from 70 to 150 meters. (76.6-164 yards). in the forum EdGun https://talonairgun.com/forums/topic/egg-hunting-from-70-to-150-meters-76-6-164-yards/#post-204838 Mon, 16 Jun 2014 00:33:13 -0400 Awesome shooting. I got no proof, but I made the shot of a lifetime last night. 250 yards, at -14 incline, I was showing my brother in law what the r3m 25 standard could do. I took about 20 shots at some shit floating in the pond and once I had a god idea of my hold over, I aimed at a branch about 3/8″ thick. I never expected to actually hit the…Read more

]]> fd182cdbdd832ad0bcd276b0c6ecc224 wanta-edgun replied to the topic Edgun Regrets in the forum EdGun https://talonairgun.com/forums/topic/edgun-regrets/#post-204470 Sat, 07 Jun 2014 17:31:46 -0400 Ok, I’ve been knocked out with a broken kidney for a few days and I see that you are getting a replacement and don’t need to do anything else but I’m going to include the below information cause I already typed it. Enjoy, or don’t. P.s. I’m not saying that helicoils s don’t work, they just don’t work well and especially in an application here…Read more

]]> fe7ea94acbf3dd47b7cbd7f31e893c7a wanta-edgun replied to the topic Edgun Regrets in the forum EdGun https://talonairgun.com/forums/topic/edgun-regrets/#post-204387 Thu, 05 Jun 2014 22:56:22 -0400 Just started a 10 hour shift, but I’ll reply at lunch or after work. No worries. Just needs to be chased with a tap and die. I’ve had to retap several of the threads on my gun. Make sure you address the bolt as well. Dnt tap it and then just put the same screwed up bolt back in it.

]]> 254a49b22734e904ce6bd2156dd6e8ac wanta-edgun replied to the topic Who shot the woman? in the forum BullPup General Chat https://talonairgun.com/forums/topic/who-shot-the-woman/#post-204360 Thu, 05 Jun 2014 13:52:09 -0400 http://www.azcentral.com/story/news/nation/2014/05/09/ohio-woman-killed-mistaken-groundhog/8898567/

My mistake, she was laying on ground shooting an Airgun, and he shot her. If this was anyone’ around heres family, I’m truly sorry to hear about this. Even it if its not, I’m still sorry to her it.

]]> 0fc05d0f0e9d20157ca66f63b448b54e wanta-edgun replied to the topic Converting a R3 .22 to .177? in the forum EdGun https://talonairgun.com/forums/topic/converting-a-r3-22-to-177/#post-204275 Tue, 03 Jun 2014 21:42:36 -0400 I’m pretty sure your going to need more than that. Is it a multi shot or single? I bet if you looked up the Oring sizes for the bolt probe you would see whether or not they are the same size, that would be a good starting point. Also, you would probably nano to come up with some sort of transfer port reducer. I’ve heard from some uk guys that…Read more

]]> 845c79227c5b940aa187984c51c31c34 wanta-edgun replied to the topic R3M Post-Ernest in the forum EdGun https://talonairgun.com/forums/topic/r3m-post-ernest/#post-204274 Tue, 03 Jun 2014 21:25:14 -0400 I am interested to know if he beveled the area just n front of the mag. I keep hainvg a problem where the pellet that is three or four clockwise from the one being loaded will catch on the top surface of the bolt housing. I’ve though about cutting a slight angle into it just to help push that pellet back into the mag a little more. I make sure…Read more

]]> 70233c06ad1e0f0bd60ae7640b419109 wanta-edgun replied to the topic Barrel Seal in the forum EdGun https://talonairgun.com/forums/topic/barrel-seal/#post-204271 Tue, 03 Jun 2014 21:14:22 -0400 The stock size seal did not work in my breach. It kept leaking. Earnest(the bullpup tuner) recommens a6x2mm but that was just too tight for me. I ended up going with a number 010 urethane 70 Derometer oring. Its about 1/2 way between the stock size and the one Ernest recommended. I’ve put about 2k shots through it since then and even had an…Read more

]]> cf8614af1d25f536729a3598a6187616 wanta-edgun replied to the topic 22 caliber magazine inside diameter? in the forum EdGun https://talonairgun.com/forums/topic/22-caliber-magazine-inside-diameter/#post-204150 Sat, 31 May 2014 23:57:38 -0400 Thank you. So I think what you are saying it that the lead will fit in the boar but the brass is too long. Right? If so that answers my ??? Just fine. I don’t think the nna bullets ar much longer than a barracuda and it fits just fine. Thank you. I’m currently shooting 3″ leaves in a pond 250 yards away with great accuracy so its hard to talk…Read more

]]> 07093e3bcc2f6027090a600d51d944d7 wanta-edgun replied to the topic latest Edgun R3M 22 cal in the forum EdGun https://talonairgun.com/forums/topic/latest-edgun-r3m-22-cal/page/2/#post-204138 Sat, 31 May 2014 14:59:48 -0400 I believe that there two diffrent methodologys developing or maybe strategies when it comes to hst and regulator. Most everyone will tell you that you do not want to simply reduce hst that much. You want to reduce the reg a little bit and then adjust the hst to give you the most fps you can get with that reg adjustment. That is the traditional…Read more

]]> e22c373c70d132067de46e000ef3a7ac wanta-edgun replied to the topic Want to buy in the forum EdGun https://talonairgun.com/forums/topic/want-to-buy/#post-204135 Sat, 31 May 2014 13:17:29 -0400 quote Redtick:Well I have a couple Airforce guns to keep me occupied until a Lelya comes available. From what I hear the Crickets are nice and quality guns also, but I agree with there just being something about hand assembled made. I have not heard of anyone that had an Edgun that didn’t like it or had problems with it. I hope one day to be…Read more

]]> 0ab68a65fcf93f0f0766eebdb56f31c0 wanta-edgun replied to the topic What am I doing wrong here? in the forum EdGun https://talonairgun.com/forums/topic/what-am-i-doing-wrong-here-d50/#post-204121 Sat, 31 May 2014 02:56:34 -0400 Well, I’m kind of hesitant to claim victory cause I haven’t had enough light to pull a full Chrony but I have been out in the woods with it several times and have always had 150 bar or so left when I get back. Before I polished the valve tips and knocked all the metal dust out of the reg vent, I always had to cut my trips short cause I would run…Read more

]]> ad760a1e517500e036e9b2fa4eafe2e5 wanta-edgun replied to the topic Edgun .22 cal More Power than .25 cal (physical Prove) in the forum EdGun https://talonairgun.com/forums/topic/edgun-22-cal-more-power-than-25-cal-physical-prove/#post-203885 Sun, 25 May 2014 08:25:26 -0400 There is more to accuracy than just bc and weight. The 25 grain 22 cal Pellet isn’t acurate in the edguns. If the lower speed of the heavier pellet was going to do anything, it would help accuracy. Speed only helps with bullet drop and wind deflection.

There is more to killing than just punching a hole in something. That’s why the make hollow points.

]]> ea0c06923a214348512d7db05d906369 wanta-edgun replied to the topic Edgun .22 cal More Power than .25 cal (physical Prove) in the forum EdGun https://talonairgun.com/forums/topic/edgun-22-cal-more-power-than-25-cal-physical-prove/#post-203876 Sat, 24 May 2014 21:09:05 -0400 As far as the 257 bullets goes, you must cast your own or buy them from a fellow airgunner that casts them. I’m not sure of the price, but I think its at least $20 for 100 bullets. No large scale pellet or bullet manufacture makes an off the shelf 257 that works well in the 257 air rifles.

As far as the 22 cal 25 grain pellet is conserned., I…Read more

]]> c8f73214cfc245ff5d92718b89379e4b wanta-edgun replied to the topic Edgun .22 cal More Power than .25 cal (physical Prove) in the forum EdGun https://talonairgun.com/forums/topic/edgun-22-cal-more-power-than-25-cal-physical-prove/#post-203872 Sat, 24 May 2014 18:46:00 -0400 Ya, I theorized about this months back when I wanted to go down to a 223 sized bullet instead of going up to a .257. At the time I was told it just didnt play out very well in real life. The .257 was just better at putting lead on target. Since then, I have talked with a few poeple that are using the 223 with great results and i am giving it a…Read more

]]> 3a6910cd4f3df7ac9c3f969a8947fa7f wanta-edgun replied to the topic What am I doing wrong here? in the forum EdGun https://talonairgun.com/forums/topic/what-am-i-doing-wrong-here-d50/#post-203865 Sat, 24 May 2014 15:54:27 -0400 Thanks again for everyone’s time. Quick update. I’ve taken it all back apart and looked everything over. I don’t know if any of this stuff makes much diffrence but I found two things.
1) the vent hole for the regulator was plugged with grease. I didn’t even know it was there and hadn’t considered that the spring washers inside the regulator…Read more

]]> 387e61057ac7358a7fdfd425a9d0eae1 wanta-edgun replied to the topic What am I doing wrong here? in the forum EdGun https://talonairgun.com/forums/topic/what-am-i-doing-wrong-here-d50/#post-203640 Mon, 19 May 2014 16:28:15 -0400 Thanks to everyone for responding. I did some shooting yesterday and tuning but don’t have a full shot string due to rain and lack of light towards the end of the day. M best tune go me 884-876 most of them were 880 +- 2for 36 shots. That’s from 220-120 bar. The reason I continue to to site the 50 shot mark is because that is what eds site…Read more

]]> cffa786a0fd3ef501d03b686d94337f9 wanta-edgun replied to the topic What am I doing wrong here? in the forum EdGun https://talonairgun.com/forums/topic/what-am-i-doing-wrong-here-d50/#post-203396 Wed, 14 May 2014 09:51:13 -0400 I’ve only compaired my gun with the others that shipped with mine. However, the r3m is supposed to be the most efficecnt so that shouldn’t be an issue anyhow. I’ll try a graph this weekend

]]> 4f37c7ae21935ae0d140ddde2a0cf882 wanta-edgun replied to the topic What am I doing wrong here? in the forum EdGun https://talonairgun.com/forums/topic/what-am-i-doing-wrong-here-d50/#post-203381 Wed, 14 May 2014 04:00:03 -0400 The original reg iTunes came shooting jsb at 925fps (about 20fps less the the other guns in the same shipment). I was getting about 35 shots per fill at that time. When I dropped the regu adjustment and got it into the 880 range. Shot count didn’t improve much. I turned the second regulator down a bit before installing it and its was shooting at…Read more

]]> 9206599b3f239aae03a8d65f2e19d4e7 wanta-edgun replied to the topic What am I doing wrong here? in the forum EdGun https://talonairgun.com/forums/topic/what-am-i-doing-wrong-here-d50/#post-203361 Tue, 13 May 2014 16:27:51 -0400 Yes, I’m comparing standards to standards, all shooting the jsb 25 grain pellet. 50 shots per fill seams to be the low end based on reading the other posts. What I was saying about the hst adjustment was that I’ve tried setting the adjustment where the fps peaks. I’ve tried adjusting it a little bit past the peak fps, and I’ve tried adjusting it…Read more

]]> 27b605e262c9bf7e0956db85eb74757f wanta-edgun replied to the topic latest Edgun R3M 22 cal in the forum EdGun https://talonairgun.com/forums/topic/latest-edgun-r3m-22-cal/#post-203267 Sun, 11 May 2014 22:16:13 -0400 Be carefull with the mag holders. They work great, right up to the point that they don’t. I use a single point sling, so the gun is hanging upside down, rubbing on my right hip sometimes. There is a likely hood that my missing mag poped out when I was switching from rifle to sidearm a few weeks ago. I had it before that and the first time I…Read more

]]> a4170278ad31c46732c1e8583a1e3b39 wanta-edgun replied to the topic Regulator baseline adjustment in the forum EdGun https://talonairgun.com/forums/topic/regulator-baseline-adjustment/#post-203254 Sun, 11 May 2014 16:53:01 -0400 There is another Oring on the adjustment screw. How would I take that Oring off without removing it?

How would I replace this Oring while its still in the bore?

quote Demp223:You must have taken regulator repair lessons from Donny. 🙂
No need to remove reg pressure screws to replace o-ring inside. That comes out with washer stack.
I’m…Read more

]]>