Talonairgun | yellowyak | Activity https://talonairgunforum.com/members/yellowyak/activity/ Activity feed for yellowyak. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 773f6e9be61d76895b08c6cfce82bdae yellowyak replied to the topic Compact with Fat Boy ldc in the forum Kalibrgun https://talonairgun.com/forums/topic/compact-with-fat-boy-ldc/#post-259549 Mon, 10 Oct 2016 04:04:48 -0400 airkrazy, get in contact with John at hagantool@aol.com to get a 1/2×20 adapter and thread cover if you want to install it yourself. In my case I didn’t want the headache of taking out the factory end cap so I send John the shroud and he made and installed the adapter. This way he can made certain everything line up perfectly. He did a great…Read more

]]> bb280b6d876842b96e829cd2ba5960eb yellowyak replied to the topic Compact with Fat Boy ldc in the forum Kalibrgun https://talonairgun.com/forums/topic/compact-with-fat-boy-ldc/#post-259499 Sat, 08 Oct 2016 19:51:50 -0400 with the o-rings installed they are a snug fit and will not fall off.

]]> 94225547155c77b8068dd002ceefe46b yellowyak replied to the topic Compact with Fat Boy ldc in the forum Kalibrgun https://talonairgun.com/forums/topic/compact-with-fat-boy-ldc/#post-259495 Sat, 08 Oct 2016 19:40:02 -0400 DIY magazine holders.

Plastic snap from Ace Hardware. I don’t remember the size. Buy a few they only cost like .20cent a piece.

I stole the kid hula hoop and cut out a piece lol

cut out a piece of foam and wrapped with carbon fiber tape. I also put a small o-ring to the plastic snap to prevent mags from falling off.

wrapped the…Read more

]]> 9416957370c810c5c5eb2763f39eebda yellowyak replied to the topic Compact with Fat Boy ldc in the forum Kalibrgun https://talonairgun.com/forums/topic/compact-with-fat-boy-ldc/#post-259493 Sat, 08 Oct 2016 18:53:48 -0400 quote ElmerFudd:Is your compact a .177 or .22? How was the sound levels before and after? A little noticeable, noticeable or very noticeable differences?

My is a .22 with a depinger installed. The noise levels in my case is very noticeable. I have ADT security and the break sensor warning would go off each time if I’m shooting without the ldc…Read more

]]> 27acb2e81d7ba3ea991125fa99150b9e yellowyak replied to the topic Compact with Fat Boy ldc in the forum Kalibrgun https://talonairgun.com/forums/topic/compact-with-fat-boy-ldc/#post-259485 Sat, 08 Oct 2016 16:44:51 -0400 quote Cricket:Sweet! What are those mag holders?

I did the mag holder when I first got the cricket a few year ago. will take a close up pic so you can DIY when I get a chance.

]]> 1abb0ffa084895590327b580244253f4 yellowyak replied to the topic Compact with Fat Boy ldc in the forum Kalibrgun https://talonairgun.com/forums/topic/compact-with-fat-boy-ldc/#post-259484 Sat, 08 Oct 2016 16:42:12 -0400 quote tsakula:how much was it? looks good too

$155 from donnyfl.
http://www.talonairgun.com/forum/viewtopic.php?f=37&t=35740

]]> cbf221b8357a42212de62514182c1b8e yellowyak replied to the topic TED LEAVES AIRGUN NATION FOREVER!!! Under new ownership. in the forum BullPup General Chat https://talonairgun.com/forums/topic/ted-leaves-airgun-nation-forever-under-new-ownership/#post-250169 Fri, 01 Apr 2016 22:48:54 -0400 maybe its April Fools Day

]]> 69539c671828add64aae5832d5606231 yellowyak replied to the topic Cricket bleed valve screw in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-bleed-valve-screw/#post-247642 Fri, 04 Mar 2016 02:42:29 -0400 Greg, thank you.

]]> 7593fa14c6e4755fa383b1a6f84c309d yellowyak replied to the topic Cricket bleed valve screw in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-bleed-valve-screw/#post-247581 Thu, 03 Mar 2016 15:13:05 -0400 hey what’s the deal with McMaster shipping charges. Wanting to buy some screw but they dont tell you how much the shipping cost is. Is this normal?

]]> a087cbe46f0bec1a3db5a993224802f1 yellowyak replied to the topic Cricket bleed valve screw in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-bleed-valve-screw/#post-247541 Thu, 03 Mar 2016 05:58:56 -0400 Octavius….I will give that a try. Thanks

]]> 374081323c36eec2cd13c84192ee6f54 yellowyak replied to the topic Cricket bleed valve screw in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-bleed-valve-screw/#post-247538 Thu, 03 Mar 2016 05:14:30 -0400 Great…thank you

]]> cd411e86cdcc99e7e36b4456c51fce03 yellowyak replied to the topic Cricket bleed valve screw in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-bleed-valve-screw/#post-247523 Thu, 03 Mar 2016 02:12:50 -0400 Thanks Greg…do you know what size I should be looking for?

]]> e0f7eb11d814b8736305235a8b4581e4 yellowyak replied to the topic I really miss Trygve. ..don't you guys???? in the forum BullPup General Chat https://talonairgun.com/forums/topic/i-really-miss-trygve-don-t-you-guys/#post-210552 Fri, 12 Sep 2014 20:35:43 -0400 You guys seem to have missed the debate between Trygve and Walkonking regarding SteveCT back in March.
I think this is the reason why Trygve’s no longer with us.
http://talonairgun.com/forum/viewtopic.php?f=35&t=29093&hilit=steve+at+yellow&start=20

on page 4 he even hinted at “retiring”

]]> 080aa68c149951cd6dbfda9a0f074b30 yellowyak replied to the topic Cricket accessories and t@@ls! in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-accessories-and-t-ls/#post-200803 Thu, 03 Apr 2014 00:18:21 -0400 John is a tuner and workd with Ernest
http://talonairgun.com/forum/viewtopic.php?f=37&t=29179&p=294178#p294178

he also did the edgun 1/2×20 adapter for donnyfl
http://talonairgun.com/forum/viewtopic.php?f=34&t=29332

He may be new but he know what he’s doing.

]]> 90e19bcfaf9f4c68c29f1008c7d808b4 yellowyak replied to the topic Does the .22 and .25 cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/does-the-22-and-25-cricket/#post-200603 Mon, 31 Mar 2014 21:36:59 -0400 I got my .22 O-rings set from sniperlabyo (Ernest) . He’s the man when it come to the Cricket.

matomaya@earthlink.net

]]> 56890e708af587cce63ac22071dc4d83 yellowyak replied to the topic My Wish - John Hagan in the forum EdGun https://talonairgun.com/forums/topic/my-wish-john-hagan/#post-200398 Sun, 30 Mar 2014 00:59:28 -0400 looks great… mine should be coming in soon.
How do you like the combination of the Neil’s shroud with the OEM? Is it a big improvement in reducing the sound?

]]> f2f7091ec544797cb53ae766d959f1c1 yellowyak replied to the topic Anyone heard from Tony on the new shipment? in the forum EdGun https://talonairgun.com/forums/topic/anyone-heard-from-tony-on-the-new-shipment/#post-199674 Sun, 23 Mar 2014 00:46:49 -0400 Last month I bought 8 tins for $135 shipped to Virginia. Which make it $16.88 a tin.
But I’m getting a 30 tins coming this week for $376.

]]> 2172e0e17e3bd17ee0b43a5a9f3ee545 yellowyak replied to the topic MRod Air P12 Update thread in the forum P12 https://talonairgun.com/forums/topic/mrod-air-p12-update-thread/page/4/#post-199407 Thu, 20 Mar 2014 20:24:08 -0400 Nice can’t wait to see the final product. This will be added to my cart… I need my P12 quiet.

]]> eb6ab6c112177afdcdc230da619e0453 yellowyak replied to the topic MRod Air P12 Update thread in the forum P12 https://talonairgun.com/forums/topic/mrod-air-p12-update-thread/page/2/#post-198939 Sun, 16 Mar 2014 05:14:17 -0400 Thanks for the update. How’s the custom part coming along? I’m interested in the shroud cause I need this sucker quiet.

]]> 80d66019b5eba06d141e9fc2b0a04a54 yellowyak replied to the topic Total Stealth Cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/total-stealth-cricket/#post-198739 Fri, 14 Mar 2014 02:32:09 -0400 quote Aerotulz55:I got my new .22 compact tues. fired some crony rounds and was doing 883 with 18.1 JSB’s but it seemed kind of loud to me. My .25 cricket is quieter after basic rear venting. So I made a slip On edgun .30 style shroud and now its total stealth!! Haven’t even made baffles yet!! This is what a sniper PCP needs to sound like. Also…Read more

]]> 9fe463ed459a91cfad501aaed28ffcf9 yellowyak replied to the topic Took the bullpup plunge,,,,Matador R2.5 incoming in the forum EdGun https://talonairgun.com/forums/topic/took-the-bullpup-plunge-matador-r2-5-incoming/#post-198509 Tue, 11 Mar 2014 20:22:40 -0400 congrats..I was also looking at it as well. But since I already have the R3 .22 just can’t justify buying another. I would love to get a hold of the factory moderator.

]]> 5a5924e55f7df2a7b2a2cf45dd996d4e yellowyak replied to the topic straight shooters tank feet in the forum BullPup General Chat https://talonairgun.com/forums/topic/straight-shooters-tank-feet/#post-197954 Fri, 07 Mar 2014 02:53:48 -0400 I bought these they work great..
http://www.ebay.com/itm/Scuba-Tank-Cradle-Holder-Stops-Tanks-from-Rolling-/161218007702?pt=LH_DefaultDomain_0&hash=item2589579296

]]> e2891a48a824ead701d466f1fb1c2f00 yellowyak replied to the topic Lelya .177 unstable FPS in the forum EdGun https://talonairgun.com/forums/topic/lelya-177-unstable-fps/page/2/#post-197766 Wed, 05 Mar 2014 17:07:53 -0400 After reading wingman post I decided to take another look and open her back up. After taking measurement and making marking I removed the inner regulator adjustment screw. On the reg screw there’s an O-ring and I can see that it not in good shape. Luckily I got in on the group buy for Edgun orings so it was an easy fix. I replaced the oring…Read more

]]> c953c9bb6bfd3da7f4a8cec284a28794 yellowyak replied to the topic Lelya .177 unstable FPS in the forum EdGun https://talonairgun.com/forums/topic/lelya-177-unstable-fps/#post-197712 Wed, 05 Mar 2014 02:40:19 -0400 My Lelya will be out of commission for awhile. Tony don’t have the reg in stock but will find out how long it will take to get one. I’m hoping it will be a few weeks and not months. Man this really suck.

]]> 2b94a824a7f9de9105fcbe7d8cb4e3d6 yellowyak replied to the topic Lelya .177 unstable FPS in the forum EdGun https://talonairgun.com/forums/topic/lelya-177-unstable-fps/#post-197710 Wed, 05 Mar 2014 02:16:22 -0400 Will contact Tony hopefully he have it in stock.

]]> b246528a9f446accffd23449ad4777ef yellowyak replied to the topic Lelya .177 unstable FPS in the forum EdGun https://talonairgun.com/forums/topic/lelya-177-unstable-fps/#post-197704 Wed, 05 Mar 2014 01:56:41 -0400 I turned the reg 1/4 clockwise. I also see 120 written on the regulator after taken it apart.

Put everything back together and added air…no leak so I’m feeling pretty good. But it was not meant to be.

Take a couple of shots over the chrony and adjusted the HST but the result is about the same. I tried everything with the HST..screwing it…Read more

]]> a55cb71061191f0e30aa64f0edcf9b09 yellowyak replied to the topic Lelya .177 unstable FPS in the forum EdGun https://talonairgun.com/forums/topic/lelya-177-unstable-fps/#post-197687 Tue, 04 Mar 2014 22:19:05 -0400 lol well I got the regulator out. You guys were right that was pretty simple. I was all stressed out for nothing.
Replaced the O-rings and cleaned everything up. Should I adjust the regulator now since it’s apart. I want to shoot around 790fps.
I was shooting about 850fps before. If so do I turn the regulator screw clockwise or counter to…Read more

]]> 1cc7e26898f6ee24c9fb39e75dabb3d4 yellowyak replied to the topic Lelya .177 unstable FPS in the forum EdGun https://talonairgun.com/forums/topic/lelya-177-unstable-fps/#post-197675 Tue, 04 Mar 2014 19:56:10 -0400 quote Veerkracht:Hi Yellowyak,

I think your regulator is not working good.
A good cleaning, greasing and a few o-rings solves the problem.

Regards, Robert.

I was hoping that wasn’t the case. In all honesty I’m a little nervous taken it apart. I have watched the disassembly/assembly on youtube and they seem pretty easy but I’m sure I’ll find…Read more

]]> 635ea537a500cc4305c2abcb961a210f yellowyak replied to the topic MRod Air P12 Update thread in the forum P12 https://talonairgun.com/forums/topic/mrod-air-p12-update-thread/#post-197272 Sat, 01 Mar 2014 02:31:56 -0400 It’s great to hear you guys cleared the air. I been holding off on the purchase but now look like it a go.
Mike.. i just placed an order for one.

]]> 15008e6c500594f055d35b5b3fedc3ea yellowyak replied to the topic puff of air to the face - fix different for new R3Ms? in the forum EdGun https://talonairgun.com/forums/topic/puff-of-air-to-the-face-fix-different-for-new-r3ms/#post-197119 Fri, 28 Feb 2014 03:49:07 -0400 eaSTS, if you need O-rings let me know I’ll sent you some.

]]> 3ccbc19f6cdfd328196553a889c5cedd yellowyak replied to the topic Don't you think, guys, EDgun looks better in this stock? in the forum EdGun https://talonairgun.com/forums/topic/don-t-you-think-guys-edgun-looks-better-in-this-stock/#post-196117 Thu, 20 Feb 2014 19:14:41 -0400 looks great. When will it be available?

]]> 4c4b39a8a9df8767ee8bb5c2b065b1a4 yellowyak replied to the topic Attack of the Clones - The all new P12 Bullpup in the forum P12 https://talonairgun.com/forums/topic/attack-of-the-clones-the-all-new-p12-bullpup/page/10/#post-195466 Sat, 15 Feb 2014 21:03:29 -0400 Mike from Citrus Airguns emailed me with price tag $1000 for the .22. A few are still available on the first shipment.
I was looking forward to getting one but not at that price range.

]]> 9c38956845e2007af233b1cc1181cdd3 yellowyak replied to the topic Edgun Screw Set Update in the forum EdGun https://talonairgun.com/forums/topic/edgun-screw-set-update/page/2/#post-193497 Fri, 31 Jan 2014 01:29:07 -0400 received my yesterday.. thanks John.

]]> ae86f48313a4ac3ecb27f36f57e0a5ae yellowyak replied to the topic Removing the wire brush from a bore snake in the forum BullPup General Chat https://talonairgun.com/forums/topic/removing-the-wire-brush-from-a-bore-snake/#post-192022 Mon, 20 Jan 2014 19:19:23 -0400 Nice snug fit on the .22. Been using it for the past year with no problem.

]]> 16eae8ed0e1f2f0e3d5e882b15a459cc yellowyak replied to the topic Removing the wire brush from a bore snake in the forum BullPup General Chat https://talonairgun.com/forums/topic/removing-the-wire-brush-from-a-bore-snake/#post-192018 Mon, 20 Jan 2014 19:10:12 -0400 could’ve same yourself the hassle and order the bore snake for air gun without the brushes.

]]> 35b0d2d8419b6e25a8fd5c805b89a694 yellowyak replied to the topic Cricket Compact Shot Count? in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-compact-shot-count/#post-191816 Sun, 19 Jan 2014 20:34:36 -0400 I get 42 shots from 200-120bar

]]> b31fd34adeb551ca87520129b1c09a29 yellowyak replied to the topic Hummingbird semi or what? in the forum Kalibrgun https://talonairgun.com/forums/topic/hummingbird-semi-or-what/page/2/#post-191222 Thu, 16 Jan 2014 00:25:55 -0400 I really wanted this when I first saw it last year but at 29″ I’ll pass.

]]> f9c6a349d1532d59c4d236c82ba1e823 yellowyak replied to the topic Hummingbird semi or what? in the forum Kalibrgun https://talonairgun.com/forums/topic/hummingbird-semi-or-what/page/2/#post-191220 Thu, 16 Jan 2014 00:11:50 -0400 WTH happen to their size. The proto type was so much smaller. At 29″ this is bigger then the compact Cricket.

]]> dcbf10863661944f2e0ba63b236e2569 yellowyak replied to the topic Selling everything thing getting out of pcp guns in the forum General Chat https://talonairgun.com/forums/topic/selling-everything-thing-getting-out-of-pcp-guns/#post-190782 Mon, 13 Jan 2014 12:15:40 -0400 that’s way too cool…I need to get my kid one.

]]> 16e0e54193337a381d98d15948509d01 yellowyak replied to the topic Edgun degaser and regulator puller combo tool for sale in the forum EdGun https://talonairgun.com/forums/topic/edgun-degaser-and-regulator-puller-combo-tool-for-sale/page/2/#post-189934 Mon, 06 Jan 2014 21:48:40 -0400 received my today…thanks Ernest

]]> 611ba5dbbcd3a14ba6ffdf925e3877c5 yellowyak replied to the topic P-Rod Compact Bullpup Build in the forum Other BullPups https://talonairgun.com/forums/topic/p-rod-compact-bullpup-build/#post-189888 Mon, 06 Jan 2014 13:34:50 -0400 excellent work….you would make a killing if you offer a kit for sale. I would definitely get one.

]]> 57f70f4d1f949265c75e8b3a2786decc yellowyak replied to the topic Cricket/Edgun Knurled HST Adjuster in the forum EdGun https://talonairgun.com/forums/topic/cricket-edgun-knurled-hst-adjuster/#post-189655 Sat, 04 Jan 2014 02:26:07 -0400 quote charlie101:quote yellowyak:I ordered 3 back in October but never receive them cause the seller put down the wrong zip code and no State on the shipping label. When I ask for a refund the guy refused and even called me a liar and a fraud and insisting that it was delivered. I filled a claim with paypal and got my money back. Too bad cause I…Read more

]]> 2c5a4db7d991c8729815a49cc22ddac1 yellowyak replied to the topic Edgun degaser and regulator puller combo tool for sale in the forum EdGun https://talonairgun.com/forums/topic/edgun-degaser-and-regulator-puller-combo-tool-for-sale/#post-189562 Fri, 03 Jan 2014 02:54:49 -0400 Order placed…thanks for making this available.

]]> 220693bd902192b3d93f226912ed7c16 yellowyak replied to the topic Ordering R3M parts in the forum EdGun https://talonairgun.com/forums/topic/ordering-r3m-parts/page/3/#post-189245 Tue, 31 Dec 2013 17:01:24 -0400 Please put me down for 1 in .22 R3

]]> 29e9417333ff9ae3d7bc43091a9291c3 yellowyak replied to the topic R3 for sale on the Yellow in the forum EdGun https://talonairgun.com/forums/topic/r3-for-sale-on-the-yellow/#post-188969 Sun, 29 Dec 2013 04:04:01 -0400 well he got back with the measurement of 34″ and has 2 screws trigger adjustment. Doesn’t matter now cause I was looking for a standard.

]]> 932fe44a4cf4018c428f455c1f90bd3d yellowyak replied to the topic R3 for sale on the Yellow in the forum EdGun https://talonairgun.com/forums/topic/r3-for-sale-on-the-yellow/#post-188963 Sun, 29 Dec 2013 03:21:12 -0400 I’m passing on the gun…just don’t have a good feeling about it. I did ask him to take measurement and question on the trigger. So far haven’t heard back yet.

]]> a00f2ad90ce15376dc82df4deee695e7 yellowyak replied to the topic R3 for sale on the Yellow in the forum EdGun https://talonairgun.com/forums/topic/r3-for-sale-on-the-yellow/#post-188958 Sun, 29 Dec 2013 02:57:44 -0400 this is the pic he sent. Long or Standard size? Look like a long to me. What you guys think?

]]> dcba6e77c897c2c7dbb803903f835cb7 yellowyak replied to the topic R3 for sale on the Yellow in the forum EdGun https://talonairgun.com/forums/topic/r3-for-sale-on-the-yellow/#post-188956 Sun, 29 Dec 2013 02:47:55 -0400 quote Demp223:Buyer beware.
Can’t find any reference to him on yellow forum and only 3 hits on yellow classifieds.

He replied to my email. He stated its a standard size however the pics he sent look to be the long version. I ask him to take a measurement and let me know. Will wait and see what happen.

]]> 2111635195b6c7c56083ccf732e2e5b5 yellowyak replied to the topic R3 for sale on the Yellow in the forum EdGun https://talonairgun.com/forums/topic/r3-for-sale-on-the-yellow/#post-188953 Sun, 29 Dec 2013 02:06:14 -0400 Price seem too good to be true. Anyone know the seller or deal with him before?

]]> b264368e98f66adf843968c9f09b2fcf yellowyak replied to the topic Cricket/Edgun Knurled HST Adjuster in the forum EdGun https://talonairgun.com/forums/topic/cricket-edgun-knurled-hst-adjuster/#post-186846 Sun, 15 Dec 2013 11:56:37 -0400 I ordered 3 back in October but never receive them cause the seller put down the wrong zip code and no State on the shipping label. When I ask for a refund the guy refused and even called me a liar and a fraud and insisting that it was delivered. I filled a claim with paypal and got my money back. Too bad cause I really wanted the adjuster.

]]>