Talonairgun | zx10wall | Activity https://talonairgunforum.com/members/zx10wall/activity/ Activity feed for zx10wall. Mon, 23 Feb 2026 16:11:56 -0400 https://buddypress.org/?v= en-US 30 hourly 2 7f668cffb3cfaa7a88be86e07e07a501 zx10wall replied to the topic anyone adjust the Reg. on the Veteran? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/anyone-adjust-the-reg-on-the-veteran/#post-276522 Thu, 01 Nov 2018 02:43:19 -0400 I’ve adjusted the reg. Took my .22 Vet Long from 133 bar up to 150 bar. With this adjustment, installing a stronger hammer spring and a port/polish on the firing-valve, it can now shoot the 25.39gr RD Monsters at 925 fps for 30 shots on a 250 bar fill. It can actually max out with the hammer spring at 945 fps but I dialed it back to 925 fps.

]]> bf9eaf5ac43e0561bd4f2caed644af93 zx10wall replied to the topic R3 .30 CAL 2ND GEN QUESTION in the forum EdGun https://talonairgun.com/forums/topic/r3-30-cal-2nd-gen-question/#post-275245 Mon, 21 May 2018 19:48:01 -0400 quote iride:Dam
Thats some hard hitting 44gr pellets,
I bet that would pretty well kill a sparrow dead, :rofl: :rofl: :rofl:
Mike

It will literally kill the crap out of ’em. :biggrinn:

]]> 7a8296c7c187998cf7437afdce6e1f71 zx10wall replied to the topic R3 .30 CAL 2ND GEN QUESTION in the forum EdGun https://talonairgun.com/forums/topic/r3-30-cal-2nd-gen-question/#post-275237 Sun, 20 May 2018 23:47:45 -0400 Here is a 22 shot string; 225 bar fill on my Std .30 R3 with Huma/plenum shooting the 44.75 grainers. Looks like 20 good shots.

I don’t think I would recommend the Huma/plenum install. Seems the performance I see here is not much better than the factory regulator and plenum. Don’t get me wrong though, I love this little powerhouse and set…Read more

]]> 933961bc24020f5b8ed51975b79fd35c zx10wall replied to the topic R3 .30 CAL 2ND GEN QUESTION in the forum EdGun https://talonairgun.com/forums/topic/r3-30-cal-2nd-gen-question/#post-275126 Fri, 04 May 2018 15:31:25 -0400 I just installed it yesterday in my Standard Gen 2. My initial tuning has the Huma at 135 bar. I peaked with HST at 880 fps and have dialed HST back to 865 fps. From a 220 bar fill I am getting about 24-25 shots on reg.

With all this said, this Gen 2 has the Hagen 3 mm valve-stem. I’m not certain that the valve has the factory valve return spring…Read more

]]> 0e5cbcb1e4c256827d82a6b2328a6b5f zx10wall replied to the topic R3 .30 CAL 2ND GEN QUESTION in the forum EdGun https://talonairgun.com/forums/topic/r3-30-cal-2nd-gen-question/#post-275123 Fri, 04 May 2018 02:49:15 -0400 It actually will fit the Gen 2 just like the Gen 1. Of course, the Gen 2 doesn’t need the hammer weight.

]]> 51ab0f75566d13ead74ebbf310d2ea28 zx10wall replied to the topic Just in: my new R5 long in the forum EdGun https://talonairgun.com/forums/topic/just-in-my-new-r5-long/page/4/#post-274647 Wed, 14 Mar 2018 17:33:45 -0400 quote bogman:Trying to get Goat’s post back on track. I went back and found the data on my .25 R3M Long, which, although a different model, likely has a similar barrel. Seems the sweet spot for Kings, .25, is around 915-920 fps. you folks with the R5s might dial the speed down to this and report back. At 40 yds., I was getting ctc 5-shot groups…Read more

]]> d367af0f9c3317da8a6f0625b48213cc zx10wall replied to the topic Just in: my new R5 long in the forum EdGun https://talonairgun.com/forums/topic/just-in-my-new-r5-long/page/4/#post-274582 Fri, 09 Mar 2018 12:20:55 -0400 Actually, I don’t take kindly to folks stirring up misinformation. Trolls talking out of the side of their necks. Assclowns from outside of my country, that can care less about me and the laws of this land. You and your aliases don’t have any knowledge or concern other than to stir up as much negativity as possible.

Keep on keeping on. Aga…Read more

]]> a60e196f5ac3d6cc5a363e6c6f92d41b zx10wall replied to the topic Just in: my new R5 long in the forum EdGun https://talonairgun.com/forums/topic/just-in-my-new-r5-long/page/4/#post-274577 Thu, 08 Mar 2018 22:07:05 -0400 quote Arschloecher:quote zx10wall:I have powder burners. I have airguns. I have a Firearms Trust set up that owns registered ATF stamp issued silencers. All airguns, to my knowledge, that have removable threaded silencers have 1/2″- 20 threads. Firearms have 1/2″ – 28 threads. If you’re stupid enough to adapt an airgun silencer and install it on a…Read more

]]> bb65e514e18e1b75afec561c2532e355 zx10wall replied to the topic Just in: my new R5 long in the forum EdGun https://talonairgun.com/forums/topic/just-in-my-new-r5-long/page/3/#post-274568 Thu, 08 Mar 2018 16:35:57 -0400 I have powder burners. I have airguns. I have a Firearms Trust set up that owns registered ATF stamp issued silencers. All airguns, to my knowledge, that have removable threaded silencers have 1/2″- 20 threads. Firearms have 1/2″ – 28 threads. If you’re stupid enough to adapt an airgun silencer and install it on a firearm you are breaking the law…Read more

]]> e65068466fc59e71e2e5dcfd405ce7fc zx10wall replied to the topic Just in: my new R5 long in the forum EdGun https://talonairgun.com/forums/topic/just-in-my-new-r5-long/page/2/#post-274498 Sun, 04 Mar 2018 01:38:24 -0400 [quote=”Kdog” I do have some 34grn heavies on order and will see how they shoot as well.Yes i have no problems posting the groups i shoot so others can see and know what to expect.It is what it is.

My .25 R3 Long with Huma/plenum kit likes the Edgun 34gr really well. I’m shooting them at 905 fps.

]]> da703bfe3b725bd17711d3f4bce748d8 zx10wall replied to the topic Just in: my new R5 long in the forum EdGun https://talonairgun.com/forums/topic/just-in-my-new-r5-long/#post-274467 Fri, 02 Mar 2018 02:49:36 -0400 Nice R5’s guys. Hope to see you post some accuracy results soon. Enjoy!

]]> 2106d443cb5e497613099e65d38f4261 zx10wall replied to the topic R3 .30 CAL 2ND GEN QUESTION in the forum EdGun https://talonairgun.com/forums/topic/r3-30-cal-2nd-gen-question/#post-274465 Fri, 02 Mar 2018 02:47:48 -0400 From what I understand and was confirmed by Brian at EdgunWest, the Huma reg kit with larger plenum doesn’t fit the Gen 2. It fits The R3 Gen 1 .30 only.

]]> f96b4835b16f6985d1f0aabce253b118 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/19/#post-274342 Sat, 17 Feb 2018 17:11:01 -0400 Maybe the .22 34 gr is not the pellet you should shoot. The .22 25 gr looks like a better choice.

]]> c3022b116318e6365a327519a5caddd2 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/19/#post-274280 Mon, 12 Feb 2018 15:12:15 -0400 quote Chilavia:Yes sir
I set huma pressure on 140 and i test it speed arrived to 266 m/s with 34 gr pellets jsb
I should test groups to find best accuracy
Thanks of your help

Very interesting. Please share the accuracy results when you can.

]]> af3c9dff56e23915e674072ae1d95633 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/19/#post-274264 Sun, 11 Feb 2018 14:10:59 -0400 quote Chilavia:Actually i like to know maximum speed jsb 34gr for Edgun matador 22caliber R3M long.

You seem to be the man to tell all of us…….Let us know.

]]> 2aeccc9186ce5cc031d2ac6481756f4c zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/19/#post-274254 Sat, 10 Feb 2018 15:40:28 -0400 quote Chilavia:Hi
Would you please help me
About weight hammer,my problem for install is weight hammer is losing after 10 shoot so
May i can make hole on hammer weight

That’s strange. I’ve installed the kit on two different guns and the hammer weight hasn’t moved on either.

Make certain you are orientating the flat of the weight properly on th…Read more

]]> 92e4317ebc22f2fa174313b854a603c9 zx10wall replied to the topic Edgun .30 Gen 1, 45gr NSA slug in the forum EdGun https://talonairgun.com/forums/topic/edgun-30-gen-1-45gr-nsa-slug/#post-274241 Fri, 09 Feb 2018 01:34:56 -0400 Very nice. What is your set up? Do you have aftermarket valve or hammer?

]]> a5984b07a9024b7c3e5e65419a569326 zx10wall replied to the topic R5 dangerous failure in the forum EdGun https://talonairgun.com/forums/topic/r5-dangerous-failure/page/2/#post-274017 Thu, 25 Jan 2018 17:10:34 -0400 Ed,
The fact that you are here and there responding to the ridicule some are slinging your way says volumes to me about you and your character. I know it comes with the territory but I don’t know of any other owner that would directly answer question or complaints like you are. I can see some are just going to take the opportunity to hate and that…Read more

]]> 2ad019d871fea39e0a0bbcf91a333d6d zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/18/#post-273945 Mon, 22 Jan 2018 03:42:49 -0400 aestheticbrah, looks good. I look forward to seeing some accuracy testing.

]]> 7c871a1be7072f2624e5abd9daedca97 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/18/#post-273843 Mon, 15 Jan 2018 01:14:59 -0400 I’ll take the distance further as I get more comfortable with the Matador. The further distances should show that the Matador has an advantage due to the faster twist rate.

FYI, I settled on an indicated 127 bar reg setting. With this I got a max of 918 fps and have it dialed for 905. BTW, my valve and action TP are both about a 5.52 or so. I d…Read more

]]> 13b030aeb67d6ada6ae5a439e6c16380 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/18/#post-273841 Sun, 14 Jan 2018 22:03:34 -0400 Alright, here are some groups. I put the .25 power tuned Matador head to head against my .25 power tuned Cricket. I was waiting for my Edgun MK2 pellet shipment to show up but they are late. So, I used the MK1’s that I always shoot out of the Cricket. Both are shooting the 34 grainers at 905 fps. I filled both and shot 6 consecutive 5 shot g…Read more

]]> e703bbd027bf4afb6c6b02a4d0abcb49 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/18/#post-273786 Thu, 11 Jan 2018 01:51:09 -0400 quote shooter3:Show us the groups.

Once I get my new probe o-rings in, my lot of Edgun 34 gr pellets and get a bit more proficient with this Matador, I shall post some group pictures.

It looks like I’m getting 32 or so shots at 910 fps on the reg. I want to know how Phil gets 55 shots at 900 fps. Is that from a 220 bar fill or higher?

]]> b7cc0906e18046cfd55c55a5dbe6fc24 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/18/#post-273784 Wed, 10 Jan 2018 19:57:57 -0400 My 2013 Long is doing well. This is a R3, so no mags to deal with which is good for me because I shoot lefty. I know Ed shoots lefty but the mag in my face is just not comfortable no matter what adjustments I’ve made. Anyway, the accuracy is there. I’m making some adjustment to my shooting technique that is helping. This Matador hasn’t liked a…Read more

]]> 43e4103f4e87e4639a29cfe0e50b9d1d zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/18/#post-273717 Sat, 06 Jan 2018 03:52:03 -0400 I acquired a .25 Matador R3 Long. It was manufactured in 2013. I just took delivery of it today. Man, this gun is in excellent, almost new condition.

I installed the Huma power kit with the regulator at 131 bar, just a hair past the indicated 130. I got a max fps of 925 with the 34 gr MK2’s. I have it dialed for 910 fps. This Long version r…Read more

]]> 39cdddecaae523574e58e2788856c9f8 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/17/#post-273454 Wed, 20 Dec 2017 15:38:42 -0400 [quote=”aestheticbrah”]

“I haven’t had the chance to accuracy test my kit yet as I’m still trying to tune the 34gr mk2 to shoot faster. Prior to installing the kit, though, I did shoot a few 100yd groups @830fps and saw potential. Did you try cleaning the barrel? I took a look into my barrel the other day and saw lots of lead chunks around the…Read more

]]> 8fcffaa012ebbf9a5988deade2ec8352 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/17/#post-273431 Tue, 19 Dec 2017 02:28:09 -0400 quote shooter3:You need do reach out to Keyser and Wingman to ask how to achieve MOA accuracy with heavies. They know the magic.

My power tuned .25 Cricket bullpup shoots them just fine :biggrinn:

]]> dc77427f14b56b5aed88fc462f9f23ce zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/16/#post-273371 Sat, 16 Dec 2017 14:29:28 -0400 quote aestheticbrah:I switched out my 3.31mm valve stem for a 3.5mm today but no increase in speed. Maxing out at 870fps with the 34gr mk2 pellets on 130bar reg setting. I must be missing something… On a side note, I think I’m addicted to tinkering with this gun.

I don’t think you’re missing anything. I crossed this same bridge with the sam…Read more

]]> cfb30518cd522319e67cb191124ce5ff zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/15/#post-272876 Tue, 28 Nov 2017 17:10:43 -0400 quote aestheticbrah:By the way, how did you figure out your barrel has the older, tighter choke vs the newer, more JSB Heavy friendly choke? Or did you mean the choke is tight in general?[/quote]

I don’t have another Ed barrel to compare mine to, however, I have pushed pellets down many .25 barrels and the Ed barrel I have is tight from lead-in…Read more

]]> 18e9dec5e7893002ab279b0bcdc868a6 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/15/#post-272830 Mon, 27 Nov 2017 01:18:55 -0400 quote shooter3:Just to make sure that we are on the same page. I am talking about these holes (in .25 there are 4 of them):

Do you really think that adding 4 holes (8 in total) may increase the velocity of the pellet? Any ideas by how far?

I drilled and deburred four more holes similar in size. I didn’t gain any max power, however, it did p…Read more

]]> c55b5ca0c72d54e32c7c35acc7040aa4 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/10/#post-271965 Sat, 21 Oct 2017 15:44:57 -0400 Let’s see what happens when these kits start being tested.

I for one can compare it to the power tuned .25 Cricket I have with a nice barrel. This barrel was picked best of five that I tested which was a very rare opportunity I was offered.

The used .25 Matador Std that I just took delivery of shoots the 25.4 gr Kings very well. It’s ready for…Read more

]]> 14efc12aa2be625e6d0edb04ccb00ec5 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/10/#post-271937 Sat, 21 Oct 2017 00:15:57 -0400 Push the envelope ~ approach or extend the limits of what is possible.

Do what you’re personally comfortable with but let those that refine, develop, create and break boundaries do what they do.

]]> 6d1c73d52a841422c5a287da7f904d41 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/9/#post-271894 Thu, 19 Oct 2017 17:00:16 -0400 I suppose you could acquire many different barrels for yourself and do testing. This after you R&D your way through creating more regulated air space to propel the 34gr .25 up to speed without stressing out the guns internals.

Personally, I believe we all owe Brian and Phil some gratitude here. They have been down these roads, put in the work…Read more

]]> d27b06b5450b22ad068893cafd3404a2 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/8/#post-271800 Mon, 16 Oct 2017 04:02:42 -0400 quote Leadbetter:My new to me.25 short arrived Saturday morning :8: It shoots so well I may hold off from fuxing for now or I might buy another matador in the future for fuxing with :whistle:

The Huma/PWR Plenum Kit will be going in my Matador ASAP.

]]> 609ca4b2da2e73ee801f781d506aeedb zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/8/#post-271796 Sun, 15 Oct 2017 23:40:38 -0400 .25 Matador R3M Standard on way!! Excited over here!!!

]]> fa058aa381b98c3d4a660730065934d8 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/8/#post-271772 Fri, 13 Oct 2017 23:54:40 -0400 Well it looks like I need to score a .25 Matador R3M. Realistically, when are these kits going to be available to the public?

]]> 94cbe83b9addc9bba2bf76ec3776af27 zx10wall replied to the topic Re: Matador Reg kit to get .25 34gr JSBs up to speed in the forum EdGun https://talonairgun.com/forums/topic/re-matador-reg-kit-to-get-25-34gr-jsbs-up-to-speed/page/7/#post-271756 Fri, 13 Oct 2017 15:45:23 -0400 Nice Wingman. I wish you would have taken a few more shots on that group. You know, take the pictures and all with the 3 shot group and then attempted more. Are you sorting pellets for these long ranges? I shoot the .25 34 gr from a Cricket bullpup. It has an added plenum tube installed and I ported the firing valve. I am now shooting at 900 fps…Read more

]]> 235c8cd10059c6359e98357d3937947a zx10wall replied to the topic 75 yard 5 shot group - 25 Cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/75-yard-5-shot-group-25-cricket/#post-269195 Thu, 18 May 2017 20:44:13 -0400 Sam,
Nice shooting. Is that a FFP scope? Have you ever had the metal HST adjuster back out on its own after shooting for awhile?

Derrick

]]> a97e00bd8a3c3f5d6d07c29c39d863bb zx10wall replied to the topic Well I just pulled the trigger on a 25. shorty... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/well-i-just-pulled-the-trigger-on-a-25-shorty/#post-269008 Mon, 08 May 2017 13:32:22 -0400 They actually have a bit of room to spare. They are good.

]]> d634e1dface9cfb070623bfe9988c80a zx10wall replied to the topic Well I just pulled the trigger on a 25. shorty... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/well-i-just-pulled-the-trigger-on-a-25-shorty/#post-269005 Mon, 08 May 2017 01:41:08 -0400 The .25 polymags fit the magazine fine.



]]> ebb94373217717532dc22dc1e472702e zx10wall replied to the topic Well I just pulled the trigger on a 25. shorty... in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/well-i-just-pulled-the-trigger-on-a-25-shorty/#post-268947 Fri, 05 May 2017 13:31:43 -0400 I do have some .25 polymags. I will see tonight if the fit the mag. Have you had good results with the polymags? I have never gotten them to group worth a darn.

]]> efd51c0f70f3aaae081448bf082e1699 zx10wall replied to the topic My .25 Vet in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/my-25-vet/page/2/#post-268946 Fri, 05 May 2017 13:27:34 -0400 Yes, Turbo, Like foxback says, its very simple. follow his instruction only make sure you loosen the Hammer Spring Adjuster’s set screw before adjusting is and snug it back when you have it set as you want. I like to spray a bit of dry film lube on the spring as well.

I haven’t tried polymags. Honestly, I don’t like them. In my past experiences…Read more

]]> 462cc869da0e13c22628797b3ce102d5 zx10wall replied to the topic My .25 Vet in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/my-25-vet/page/2/#post-268922 Thu, 04 May 2017 16:31:40 -0400 Yeah, I saw that group and laughed at the story of being hurried. That shows crazy good potential to say the least.

I do have a 45 min and 60 min CF bottles. I don’t have a compressor as of now. Carry them to a dive shop and get them filled.

Let us see when you try the 100 again.

]]> d159f95ed19a91ca5e694601ff191611 zx10wall replied to the topic My .25 Vet in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/my-25-vet/#post-268911 Thu, 04 May 2017 01:00:02 -0400 Oh dadgumit. You had to go there. Now I must push the recovery. :winkn:

I’ll be shooting soon!!

]]> 0d7ac5feea3f6166318258745fcc34f1 zx10wall replied to the topic My .25 Vet in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/my-25-vet/#post-268906 Wed, 03 May 2017 19:16:43 -0400 quote Bizill:You played around out at 100yds yet?

Unfortunately I have not. I freaking wrecked my motorcycle again!! It hurt bad this time! Road rash, fractured left ankle and tibial plateau fracture in my right knee. Had surgery almost two weeks ago. I’m now to the point that I can use crutches but I can’t carry guns or cases around.

I’m done…Read more

]]> dfd91a3ba25c9e6341415d065618db04 zx10wall replied to the topic Veteran 16gr pellet tune? in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/veteran-16gr-pellet-tune/#post-268903 Wed, 03 May 2017 16:22:44 -0400 I would personally set the speed to 880 to 890 fps. The extra 30 fps isn’t going to give you much more umph and may even cause some instability induced accuracy issues (should be verified with accuracy testing). It’s a personal preference really. It’s not necessary to adjust the reg as you can get away with just a hammer spring tension adjustment…Read more

]]> 2143a0197590954c703ef64ad1aada2f zx10wall replied to the topic Bizill's Taipan Veteran (Pic HEAVY! Don't quote first post) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/bizill-s-taipan-veteran-pic-heavy-don-t-quote-first-post/page/2/#post-268589 Wed, 19 Apr 2017 07:21:26 -0400 quote Jvr:Hey this is kind of a dumb question, but I assume the set screw should be tight enough to prevent casual turning of the shroud once tightened right? Mine would just keep spinning in the clockwise direction and I assume I should tighten the set screw at the base reasonably tight to prevent this, correct?

Correct. The shroud isn’t prone…Read more

]]> 199cf9fb3b83d58c54b68cf508071337 zx10wall replied to the topic Bizill's Taipan Veteran (Pic HEAVY! Don't quote first post) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/bizill-s-taipan-veteran-pic-heavy-don-t-quote-first-post/page/2/#post-268544 Sun, 16 Apr 2017 23:07:59 -0400 Ernest Rowe has videos on many airguns. His teachings are priceless. He has a .25 Vet now and is going to make videos on it. He has his shooting 54 shots at 875 fps with the 25.4 grainers. He got rid of that spike of fps at the end of the string by lowering reg pressure.

]]> 9223a2e3acfec2a8fad6eb6eb65a2ac8 zx10wall replied to the topic Bizill's Taipan Veteran (Pic HEAVY! Don't quote first post) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/bizill-s-taipan-veteran-pic-heavy-don-t-quote-first-post/page/2/#post-268542 Sun, 16 Apr 2017 18:49:23 -0400 quote Bizill:Did some quickie chrony. I started off at 230 bar and after 50 usable shots @ 38ft-lb energy with 25.39 grain JSB’s, I end up at 145 bar. I may have to up the power or keep it here for shot count. Not sure yet. Have yet to stretch out her legs as I only had 20 yards to play with. Hole-in-hole, obviously at this close range. Weak,…Read more

]]> 0111c885dd4aa8edbbf820e4ff32a918 zx10wall replied to the topic My .25 Vet in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/my-25-vet/#post-268460 Sat, 15 Apr 2017 02:42:43 -0400 quote kidcurry:quote Ranger08:Can I ask what the longer hammer spring does? Thanks and nice shooting!
Wild ass guess says it raises the max power from 75 to 81 joules :biggrinn: :biggrinn:

Brilliant :rofl:

]]> d6080c7a334d4557cdf665581e00a237 zx10wall replied to the topic My .25 Vet in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/my-25-vet/#post-268452 Fri, 14 Apr 2017 22:38:46 -0400 quote mughram:wow very nice

more than 81 joules !

the chart says std 75 joules

you change anything ?

I added a longer hammer spring. That’s it!

]]>