Bobcat .25 at 41 and 97 meters
Mounted my scope cam on the BC the other day.
Have only 600-700 pellets with it.
Here’s videos of it.
Edit. No reg installed. Will do that shortly.
//Fredrik
All Replies
Nice shooting! I just ordered a Bobcat in.25. FC
This is with the reg install.
The red dot is 25mm in diameter. JSB from the tin.
Have only 600-700 pellets with it.
Here’s videos of it.
Edit. No reg installed. Will do that shortly.
//Fredrik
Poor Hoot:
Zonk
Naaah – only Arkansanians do that … :fishinghole:
I thought they strapped them on…….. :rofl:
Zonk
Real Men don’t bolt on. They SCREW on !!
I’m waiting for my new CF combo to arrive. It’s a work of art with nicely machined, anodized aluminium innards and all.
Sent from my iPhone using Tapatalk 2. This POS iPhone sucks though …
Well, this cabon shroud extension also did the trick to quiet it down. Not as bulky as yours Ville but streamlined [WINKING FACE]
Bolt on type on the original shroud.
Next is to make a new carbon shroud as the original.
Do a shorty shroud that keeps the length at around std and have a threaded muzzle end on it. Then add a humongous Can and you´ll be pissed on the fact that the only thing you hear is the hammer slap. Unfortunately also the one thing extemely difficult to quiet down without making the rifle look bulky and stupid. You know , like a Bobcat .. :butkick:
Well this is the version one 🙂
More is coming 😎
Made a carbon shroud with insert. So quiet that you can hear the pellet ❗
Congratulations ! Now you have a 6 feet long, heavy “Bullpup”. 😀 😀
Nice shroud! If it was mine i´d have done it approx. 200 mm shorter, added a threaded end cap and had a matching add-on silencer made as well – something like this:
Talk about silent – with the Can on you´re in a Vacuum !! :darth-vader:
Have you removed the silencer/shroud or retightened them ? Or bumped it onto something ?? I got everything centered (the job done at the factory was beyond bad) so if you´ve removed or retightened the barrel/shroud/muffler you may need advice to get them properly aligned again. Have you checked for clipping ? Not just at the muzzle but the whole passage ??
It should shoot far better than that .. 😯
Have removed it when the MS was installed.
No signs of clipping at the baffles. Shoot perfect at 50 yards…
Will take it apart and realign it again and se if its shoot better…
Shhhhh … 🙄
It wasn´t a wise but a WIFE. She drove over it with her Car. Twice. First just casually over it and then she backed over once again because she thought she drove over “something”. You know how Women deal with such situations.
Have you removed the silencer/shroud or retightened them ? Or bumped it onto something ?? I got everything centered (the job done at the factory was beyond bad) so if you´ve removed or retightened the barrel/shroud/muffler you may need advice to get them properly aligned again. Have you checked for clipping ? Not just at the muzzle but the whole passage ??
It should shoot far better than that .. 😯
Forgot to mention this on the Bobcat 😀
Made a carbon shroud with insert. So quiet that you can hear the pellet ❗
Attachments:
- You must be logged in to reply to this topic.
They should be in any week now. My buddy’s been waiting for one also from AoA. :4:
Zonk