Mag indexing

zonk

Participant

April 25, 2015 at 9:24 pm

Sounds nice Hooter, lets have a look see at it.

hoot

Participant

April 25, 2015 at 7:30 pm

:hoot:

Naturally! Now that nobody gives a gnat’s nuts!

Thank god for Baz…we’d never learn nothing…know what i mean Norman?

Hoot:

PS: Got my Leyla zero’d in, and it is shooting dead nuts out to 50 yards. I can’t see much further than that. I put a 3 X 9 Bugbuster on it and it is a perfect scope for that little gun. The Leyla has a one shot magazine and it is really easy to index and reload!

zonk

Participant

April 25, 2015 at 1:45 pm

I know that now, now that you mentioned it.

hoot

Participant

April 25, 2015 at 1:42 pm

quote Zonk:

I thought the nose knows?? :rofl:

Nonsense! Nobody’s nose knows nothing…nitwit!

Hoot:

zonk

Participant

April 25, 2015 at 12:23 pm

I thought the nose knows?? :rofl:

gooner

Participant

April 24, 2015 at 11:47 pm

Baz knows..

baz

Participant

April 24, 2015 at 9:05 pm

quote GKU:

quote baz:

I have found the problem with indexing of cricket magazines is down to the indexing cam bending upwards, when these parts are cut out with the EDM machine the cut left where the wire has gone in to cut the pin hole closes up causing the tip of the cam to move upwards, so when you cock the gun the indexing cam doesn’t move far enough down to align the next pellet, I have had 4 people come with the same fault, my solution to this problem is to put the gap so the 2 sides are parallel to each other and then fill the gap with silver solder to prevent the gap closing up again.

Hi Baz,

Nice fix !
Was this a immediate problem with them, or one that occurred over time ?
It occurred over time

~ GKU

sir-ville

Participant

January 21, 2015 at 6:50 pm

How do you know that ?? Are you in-the-know of something ?? 😯

zonk

Participant

January 21, 2015 at 5:04 pm

Oh boy now we have a know it all……

sir-ville

Participant

January 21, 2015 at 4:58 pm

I don´t know. But i want to know this : Does Dimi3 know that we don´t know so he´s in the know regarding all the knowledge around the subject ??

I just want to know.

hoot

Participant

January 21, 2015 at 4:44 pm

quote Sir Ville:

quote octavius:

I would check first what Dimi3 wrote because there should be error when the problems suddenly occur.

Where can i find that ??

Those of us who know what Dimi3 wants us to know…know! Know this…if Dimi3 wanted you to be “in the know”, he would have known. The fact that you don’t know, is a known fact.

Know what I mean?

Hoot:

sir-ville

Participant

January 21, 2015 at 2:45 pm

quote octavius:

I would check first what Dimi3 wrote because there should be error when the problems suddenly occur.

Where can i find that ??

zonk

Participant

January 21, 2015 at 12:53 pm

Simple for simple minded…… :suprisedn:

Anonymous

Inactive

January 21, 2015 at 11:39 am

quote baz:

I have found the problem with indexing of cricket magazines is down to the indexing cam bending upwards, when these parts are cut out with the EDM machine the cut left where the wire has gone in to cut the pin hole closes up causing the tip of the cam to move upwards, so when you cock the gun the indexing cam doesn’t move far enough down to align the next pellet, I have had 4 people come with the same fault, my solution to this problem is to put the gap so the 2 sides are parallel to each other and then fill the gap with silver solder to prevent the gap closing up again.

Hi Baz,

Nice fix !
Was this a immediate problem with them, or one that occurred over time ?

~ GKU

sharpshot86

Participant

January 21, 2015 at 5:22 am

quote Hoot:

Dear Ballz,

I assume this is for the Cricket??? The indexing problems have been mostly directed towards the Hummingbird. It might be wise to edit your title to say “Mag Indexing Cricket” so the Cricket people are directed to your posting.

Hoot:

Ballz said “cricket”, and the OP started the post in May, before the hb, so don’t jump on his “Ballz”.

Sent from my iPhone using Tapatalk

All Replies