My .30 cal Shortie.
Wanted to try a .30 shortie, knowing with a short barrel the speed was going to be slower and louder. With a TJ .30 barrel cut to 12″ with a mod HW LDC AOL is 25″
So the speed at 140b is 700fps with 44g.
That’s 48fpe.
28 shots from a 250b fill.
The sound level about the same as the .25 cricket. Now test how she shoots. I tested this barrel before on the 9mm cricket that was grouping 1/2″” @50y. The key is how to hold this .30 shortie!
Here is my .30 probe that is make out Delrin–vary smooth and quiet to slide in and out.
All Replies
h()()t has no heart
And…don’t you forget it!!!!
Hoot:
Besides giving you food-shelter-clothing-health care-cell phones -TV and Cable we would even go a step further because Conservatives are fucking heartless beasts I mean if we could we would breath for you too just to make your life easier.
I am a Liberal Socialist Democrat I care for you.
h00Ts a Ultra Conservative PRICK.
:hoot:
Any of you brain surgeons have such a tool? I mean…do I really have to skip another round of chemo to buy a tool I’ll use once???? Are you guys THAT cold hearted????
Hoot:
no sleeve needed for the Vulcan…. Just the Proper size regulator tester. (the Vulcan has the Largest Regulator out of all the Pups…)
You can use a cricket/eddie tester and a sleeve to test the P12 or the Mutant… but the Vulcan is just too big.
You will need a Regulator tester with a Vulcan Sleeve.
:hoot:
How DO I adjust the regulator upwards on my Vulcan? Don’t I need an adjustment tool????
Hoot:
:hoot:
1) I’m trying to live on a fixed income! I’m doing good to own the pcp I’ve got!
B) Why do people raise the price just because the caliber went up 5000ths of an inch? I don’t have $2000 to drop on another pcp.
III) The only way I’ll get a .30 caliber is to sell what I’ve got, and I’m not certain I’ll get what I paid, plus I’m not certain I’ll gain enough performance to make that effort.
Perhaps I should just raise the pressure on my regulator, and live with the .25! 60 fpe would suit me just fine. Now, if I could just find that post where Ernest showed how to adjust the regulator…
Hoot:
go for it . You have nothing to lose and every thing to gain . If dead , there is nothing to gain .
FROM : THE BIRDMAN
Dear Bird….
At my age a “hard dick” is a difficult policeman!
Hoot:
HOOT , if your dead by then why would you care ? Dead is dead be a little more aggressive . Think of it even at your age if possible like a hard dick ,
go for it . You have nothing to lose and every thing to gain . If dead , there is nothing to gain .
FROM : THE BIRDMAN
:hoot:
I could be dead by then!!!
Hoot:
Hoot AGT is going to make a .30. Should be out in 2016…
:hoot:
Could a .30 caliber barrel be fitted to a Vulcan .25? I’m curious if bumping the regulator up to 140 or so would provide the extra power needed. Of course, it would have to be a single shot, but I’m ok with that.
Hoot:
I can verify this! Shortie is accurate out to a buck 30 we don’t have much more room to shoot unless we get up and move and set up a table maybe another 15 to 20 yards. It still has power at that range it is hitting with a nice smack!
- You must be logged in to reply to this topic.
Snyper
When you get ready to sell it , Do you take layaways ?
I am a big .25 fan but I sure would like that .30 setting on my shooting table,
Or just in my house ,
Mike