OILED PELLETS
What kind of oil is everyone using?is there sum thing very common and available ?
All Replies
Nothing worse than a dirty hoe, whoops I mean pellet.
Yeah I don’t wash the Kodiaks either, pretty clean 😛 😛 😛
SAW
Yeah I got the same stuff Saw uses. I don’t lube my pellets much, but if I do that’s what I use, as per Mac 1 Tim. And since I only shoot JSB’s, or Kodiaks, I never bother to clean them as they seem quite clean already. Now those CP’s are a different story… filthy!
5 drops of FP-10 per tin, shake and sit.
later
Here is a pic of the stuff
Later-
SAW
If all you are shooting is PCP, or you only use a certain pellet for PCP, MSP, or CO2 guns, then FP-10 is the way to go.
I’ve been using both products for years with no ill effects on O-rings.
My springer (gamo) is retired….it keeps loosing the calibration through the scope….Iwas schtoopid when I bought it a few years back….I didnt know then that there are scopes made exclusively fer air rifles…..DUH !
As of recently,I am strictly PCP.
I called the Harley Davidson Shop said no Finish Line Krytech? chain lube?
Sam 😀
If you have springers that you shoot as well as PCP, then you’ll want to use Krytek to lube your pellets with as FP-10 does not tend to diesel.
If all you are shooting is PCP, or you only use a certain pellet for PCP, MSP, or CO2 guns, then FP-10 is the way to go.
I’ve been using both products for years with no ill effects on O-rings.
yeah Fly, thats what ya want one of those racer type bicycle shops.
We call those guys road nazi’s, they think the own the street around hear,
pretty funny
SAW
Sam 8)
😆 😆 😆 😆 Shit, when Saw said bike , me thinks …Harley ! 😆
Most harleys anymore are Sturgis anyway ,cept for older ones….I be gotten a pedal bike shop around too…its a fancy schmancy bike shop…they prolly got it.
FLYNLED: Bicycle shop, Probably NOT in a Harley Shop don’t really know? We do have a Harley shop, will call to see?
Sam 8)
Mac-1 reccomends it.
I dries completely and smell good too.
It’s actually a chain lube check bike shops.
SAW
Hey saw,
thanks man,I have a Harley shop here in town, i will look for it….I picked up fp-10 ,but I like to experiment…got alot of flavors of pellets anyway…between the Talon in two calibers and I have a Ben Disco too in 22.
kry-tech
Mac-1 reccomends it.
I dries completely and smell good too.
It’s actually a chain lube check bike shops.
SAW
Thanks knifeman ,that sounds like a good plan…..now , after you have finished the whole can ,do you leave the foam in or take it out ?
I like to put a few drops on the foam in the tin, roll aroung a few,(50 or so), dump those out, and do the entire tin. This way, only a very little bit of the oil get’s tranfered. You don’t want them WET!
- You must be logged in to reply to this topic.
later
Tach,
do you lay a piece of foam or the material that comes in sum pellet tins on the bottom or not.