condor shot like 10fp energy
some help here guys i got a condor that is shooting very slow at full pwr on the wheel makes at least 10 fp energy everything seems ok just the amount o air coming out of the valve seems to be the problem, also after i fill the tank and open the bleed valve i got the impression that a lot of air goes out, any help would be appreciated,
All Replies
That makes the second time I missed out on buying the same rifle!
Richard.
Impressive! 🙂
3rd times a charm 😉
Ooooooooooooooooooooohhhhhhhhhhhhhhhhhhhhhhhhhhh Dammit!
That makes the second time I missed out on buying the same rifle!
Richard.
to late, i sold it already
Victor,
You should have let me buy that rifle off Steve on the Yellow Forum instead of you, it would have saved you a lot of headaches….:-)
Richard.
Fill the tank note the level you stop. Now bleed the coupler. Close the bleed valve, and re apply air. Note where it starts is the difference of what it was filled to, and what you lost.
Mike
test
by any chance did you figure out why it was leaking a lot of air when u bled?
Im thinking it could be the pump…I lose a lot of air too when i bleed mines to unscrew it off the pump…from 2600 to 2000 or less…
hmmm…i hope you get the answer soon cuz im having the same problems here…whenever i bleed mine to unscrew the tank off about 500 psi leaks out…it just started doing this…the pump was hot and outside was too so i thought it had to do something with the weather…
i see if i can take it off don’t have a lot of tools
Man Victor…I am confused…..Next you will need to unscrew the valve from the tank to make sure the spring retainer nut is tight or snug and that everything in there is ok….I just don’t understand what else could be wrong…
yes it goes down and comes back up again
Press on the valve to see if it is operating smoothly
i just empty the tank what should be looking for? i never opened before
I wonder if your valve stem is binding, not allowing the valve to close when pressure equalizes.
Maybe along the same lines, I wonder if your retainer spring is missing in the valve? You ever had the valve apart?
Just asking, not really sure why the valve wouldnt close when pressure equalized.
- You must be logged in to reply to this topic.
Except this time……there will be no 3rd time.
I think someone or something was trying to tell me not to buy this rifle. I guess I will have to sell something else to come up with the money for a new Condor….:-)